Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Stainless Steel Pipe Coupling Casting/Forging

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the casting or forging of stainless steel pipe coupling blanks for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work focuses on creating raw forms and managing the necessary tooling for Admiral Valve LLC part number 99565 P/N H847-12-SS, identified by NSN 4730-00-988-7193. The final deliverables consist of rough or semi-finished coupling blanks. The project is governed by strict regulatory standards, requiring full compliance with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Performance will take place in Tracy, California, under NAICS code 332111. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

General Info

Subcontract for casting stainless steel pipe coupling blanks for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332111 - Iron and Steel Forging

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-27-T-0602.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COUPLING, PIPE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs casting or forging of stainless steel pipe couplings for prime contractors on DLA Weapons Support Fluid Handling Division projects. Creates raw forms and manages associated tooling for part number Admiral Valve LLC 99565 P/N H847-12-SS per NSN 4730-00-988-7193. Must comply with the Buy American Act, Berry Amendment, and DLA Master List of Technical and Quality Requirements. Delivers rough or semi-finished coupling blanks.

Similar Contracts

Same NAICS industry code

Supply of Raw Material for Pin-Rivet FabricationThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of raw metal stock, castings, or forgings required for pin-rivet fabrication. The selected provider will source and deliver materials that strictly adhere to the metallurgical specifications of NSN 5320-01-365-6361. To ensure quality and compliance, the contractor is required to provide comprehensive material certifications and Mill Test Reports, while maintaining full adherence to the Buy American Act. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, regarding this requirement categorized under NAICS code 332111. The scope focuses on delivering certified raw materials or semi-finished components to prime contractors supporting DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Permanent Type Fluid Pressure Filters (NSN 4330005551299)This subcontract involves the manufacture or procurement of nine permanent-type fluid pressure filters for the DLA Weapons Support Maritime Supply Chain. The required components must match Part Number 50824 and feature reusable Monel wire-wound filtration elements with 0.002 inch spacing and 3/4-16-NF-3 female right-hand threaded connections. Additionally, the filters must be equipped with high-pressure housings rated for 3000 PSI. The project mandates strict adherence to the Buy American Act, ASTM D3951, and MIL-STD-129 standards. Performance will take place in Jacksonville, Florida, under NAICS code 332111. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Precision Casting and Forging for Motor Controller ComponentsThis subcontract, titled Precision Casting and Forging for Motor Controller Components, involves the fabrication of raw metal blanks for NSN 6110-01-409-1405. The selected provider will perform casting and forging operations for prime contractors supporting DLA supply contracts, ensuring all work adheres strictly to technical drawings and specifications. A critical requirement of the contract is the provision of detailed identification regarding sources and processes for all critical operations, which must receive formal approval from the Government Design Control Activity. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the project falls under NAICS code 332111. Performance of the contract is located in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, to meet the requirements for delivering these essential motor controller components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Aerospace Grade Material Supply (Forgings/Castings)

POSTED

about 9 hours ago

DEADLINE

Bronze Valve Piston Casting/ForgingThis subcontract involves the casting or forging of bronze valve piston blanks for prime contractors supporting the Defense Logistics Agency. The contractor must produce rough or semi-finished components according to Part Number 49933F specifications using traditional subtractive or formative manufacturing methods, as additive manufacturing is strictly prohibited. All materials must be free of mercury or mercury-containing compounds to ensure compliance with safety and quality standards. The project is managed under the Department of Defense in San Diego and requires strict adherence to the Buy American Act and DFARS 252.225-7001 regulations. Interested parties must respond by November 2, 2026, to provide these specialized bronze components under NAICS code 332111.

POSTED

about 9 hours ago

DEADLINE

Specialized Material Supply for Straight Headed PinsThis subcontract involves the supply of specialized raw metal stock for prime contractors working on DLA Weapons Support ASC projects, specifically for the production of straight headed pins. The supplier is responsible for sourcing and delivering raw materials that strictly adhere to the chemical and physical properties defined in Drawing NR 78286. To ensure the integrity of Critical Application Items, the provider must supply full material certifications and Mill Test Reports to maintain complete traceability. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must adhere to the response deadline of October 30, 2026. The procurement falls under NAICS code 332111, focusing on the delivery of certified raw material stock that meets rigorous military specifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Aerospace-Grade Copper StockThis subcontract involves the supply of high-purity aerospace-grade copper raw material, specifically tubing or bar stock, to support prime contractors working with the DLA Weapons Support Fluid Handling Division for B52 aircraft. The selected provider is responsible for sourcing and certifying that all materials are mercury-free and must provide Material Test Reports and Certificates of Conformance in strict accordance with the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111, with performance taking place at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the certified copper raw materials required for these Department of Defense operations.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0153

Solicitation SPE8E4-27-T-0153 is a request for quotations from the Defense Logistics Agency Troop Support for the procurement of 15 feet of Grade B16 steel metal bar. The material must be hot rolled, round, quenched and tempered, with a diameter of 0.438 inches and lengths between 12 and 20 feet, weighing 0.511 lb/ft. This procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSDL), and a Certificate of Quality Compliance (Mill-Material Certification) is required for every shipment. The items are to be delivered FOB Destination to Naval Base Rota, Spain, with an original required delivery date of September 24, 2026, and a delivery window of 20 days after award. The contract mandates strict adherence to marking and packaging standards, requiring continuous identification markings via stamping or stenciling and packaging in accordance with ASTM D3951 and MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, including specific references to ASTM A193/A193M-26 and ASTM A700-14. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012. A price evaluation preference is available for certified HUBZone small business concerns.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

PIN, GROOVED, HEADED

Solicitation # SPE4A6-27-T-6046

Solicitation SPE4A6-27-T-6046, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 100 grooved, headed pins (NSN 5315-01-237-4929). The contract requires the delivery of the hardware along with a mandatory Production Lot Test (PLT) to validate quality conformance. Delivery is specified as FOB Origin with a need ship date of April 20, 2027, and a final required delivery date of June 27, 2027. The procurement is conducted under the First Destination Transportation program, with the final destination being Hill AFB, Utah. The contractor must adhere to strict quality and documentation standards, including compliance with SAE AS9003 or ISO 9001. Production Lot Testing requires the contractor to notify the Quality Assurance Representative (QAR) 14 calendar days prior to testing. Required shipping documentation includes DD Form 1222, DD Form 250/iRAPT, material and process certifications, and applicable test reports. Packaging must follow ASTM D3951 and MIL-STD-129, while invoicing must be processed electronically via Wide Area WorkFlow. This is not a small business set-aside, although a price evaluation preference is available for HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award. The contract incorporates several critical regulatory requirements, including CMMC Level 2 cybersecurity certification, the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment. All inspection and acceptance will occur at the point of origin.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0154

Solicitation SPE8E4-27-T-0154 is a fixed-price procurement issued by the Defense Logistics Agency for the supply of 1018 steel composite metal bars. The required material is cold finish, flat bars measuring 0.625 inches thick, 1.000 inch wide, and 12.00 feet long, with a reference weight of 2.130 lb/ft. The procurement is not a small business set-aside and requires that only suppliers listed on the Qualified Suppliers List for Distributors (QSDL) are eligible for award. Delivery is specified as FOB Destination, with shipping addresses provided for both parcel post in APO AP and freight in Kadena AB, Okinawa, Japan. The contract mandates strict quality and marking compliance, including the provision of a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Marking must adhere to MIL-STD-129 and include specific details such as the DLA contract delivery order number, NSN, manufacturer's name, and heat/lot numbers. Packaging must comply with RP001 and MIL-STD-2073-1E, with specific preservation and packing requirements defined by ASTM A700. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS portal and comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L5-27-T-0284

Solicitation SPE7L5-27-T-0284 is issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 68 units of Hook Bolts, identified by NSN 5306011663732 and Oshkosh Defense LLC part number 1341450. The requirement is categorized under NAICS code 332111 and is not a small business set-aside. Delivery is required by April 14, 2027, with a need ship date of April 20, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129 for shipment marking, and MIL-STD-130N for property identification. Palletization must comply with RP001 DLA Packaging Requirements. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM standards. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 9 hours ago

DEADLINE

Forged Anchor Type Shackle FabricationThis subcontract involves the fabrication of 136 forged anchor type shackles for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for forging NSN 4030-00-132-9142 using 3/16 inch diameter shackle stock in strict accordance with Federal Specification RR-C-271F, Type 4A, Grade A, Class 2. Quality control sampling must be performed following MIL-STD-1916 or ASQ H1331 standards. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The work is categorized under NAICS code 332111, with the place of performance located in Jacksonville. Interested parties must respond by October 29, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Globe Valve Parts Kit SupplierThis subcontract involves the supply of 49 completed and packaged globe valve parts kits for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The scope of work includes the manufacturing or sourcing of components, kit assembly, and packaging in strict accordance with MIL-STD-2073-1 Appendix D. Additionally, the supplier must ensure all marking and labeling comply with MIL-STD-129 and provide Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. The project falls under NAICS code 332911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 2, 2026, to be considered for this procurement effort.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 97 hose assemblies, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001. The contractor must utilize industrial labeling equipment and MIL-SPEC packaging materials to meet strict military standards. The completed deliverables are to be transported to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 493110 and is designated for prime contractors supporting the agency's fluid handling operations.

General Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of 97 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 1/2 inch inside diameter and a nominal overall length of 108.0 inches, including perforated covers. All production must strictly adhere to NSN 4720-01-359-0598 and RA001 standards. The project is subject to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026.

All Other Plastics Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing military-grade packaging and marking services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the preparation of five valves for First Destination Transportation shipment, ensuring full preservation and traceability of the fluid handling components. Technical execution must strictly adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, utilizing QUP 001, Pres Mthd AE, and designated cushioning and dunnage materials. The performance of these services will take place in Tracy, California, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-238-5948)This subcontract involves the procurement or manufacture of five specialized safety relief valves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must match Eaton Aerospace part numbers 847357 and L1-CS-06-B-50, falling under NSN 4820-01-238-5948. Performance will take place in Tracy, California, with all deliverables subject to strict sampling and quality assurance standards according to MIL-STD-1916 or ASQ H1331. The contractor must ensure full compliance with the Buy American Act and adhere to environmental prohibitions regarding the use of mercury and hexavalent chromium. Interested parties must respond by November 2, 2026, to fulfill the requirements of this specialized equipment supply effort.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Special Plug (NSN 5342-00-839-1515)This subcontract involves the procurement of 13 units of a special plug, identified by NSN 5342008391515, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for fabricating or sourcing the hardware to ensure full compliance with the established NSN technical specifications. Strict adherence to military and industry standards is required for quality assurance and logistics. All items must be inspected and sampled according to MIL-STD-1916 or ASQ H1331 Table 1, packaged in accordance with ASTM D3951, and marked and labeled per MIL-STD-129. Performance of the contract will take place in Cherry Point, with a response deadline set for November 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720-01-245-6616)This subcontract involves the supply of 709 feet of specialized nonmetallic tubing for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must feature a 0.050 inch inner diameter and a 0.110 inch outer diameter, strictly adhering to Saint-Gobain F4040A specifications. The supplier is responsible for ensuring all materials comply with the Buy American Act and ASTM D3951 standards. Additionally, all products must be packaged and marked in accordance with MIL-STD-129 and DLA Master Lists RA001 and RP001. Performance for this contract is centered in Tracy, California.

All Other Plastics Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS