This Government Contract opportunity from California was posted on August 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Stainless Steel Reinforcing Supply

Closed

State & Local

Submission Closed09/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M4-27-T-1322

Solicitation SPE7M4-27-T-1322 is a fixed-price procurement for 518 feet of seamless metallic tubing for aerospace vehicle hydraulic systems. The required material is corrosion-resistant steel S30400 with a 1/2 inch outer diameter and a 0.020 inch nominal wall thickness. The tubing must be provided in random lengths between 5 and 20 feet, passivated inside and outside, polished on the exterior, and supplied in a 1/8 hard condition. Technical compliance is governed by SAE AMS-T-6845 and TDP Rev B Gen 2. The contract specifies a quantity variance of plus or minus 10 percent and requires delivery to DLA Distribution Warner Robins by a need ship date of July 14, 2027. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. The procurement is open to full and open competition, with a price evaluation preference available for certified HUBZone small businesses. Offers must be submitted via DIBBS on an FOB Origin basis, and the use of additive manufacturing processes is strictly prohibited for this award.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0185

Solicitation SPE7M2-27-T-0185, issued by the DLA Weapons Support Nuclear Reactor Program, is a request for quotations for 1,776 feet of metallic tubing. The required material is a copper alloy, composition 90-10, with a 0.675 inch outer diameter and a minimum wall thickness of 0.065 inches. The tubing must be annealed according to military specifications for seamless and welded copper-nickel alloy tubes. This is designated as a critical application item, and the procurement includes a quantity variance of plus or minus 10 percent. The contract specifies delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of October 13, 2026, and an original required delivery date of July 16, 2027. Delivery is established as FOB Origin with a delivery period of 148 days. Inspection and acceptance will occur at the destination. Strict adherence to packaging and marking standards is required, including MIL-STD-2073-1E, MIL-STD-129, and Federal Specification MIL-C-3993. Notably, the use of ozone-depleting chemicals and mercury or mercury-containing compounds in the hardware or packaging is prohibited. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must be registered in the System for Award Management and comply with various FAR and DFARS clauses, including those regarding the Buy American Act, the Berry Amendment, and cybersecurity safeguarding of covered defense information. The procurement is open to full and open competition, with specific price evaluation preferences available for certified HUBZone small businesses.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1174

Solicitation SPE7M4-27-T-1174, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for 2,670 feet of aircraft hydraulic quality metallic tubing. The required material is corrosion-resisting steel, Type 1, Composition 321, 18-8 stabilized, featuring a 0.250 inch outer diameter and 0.035 inch wall thickness, provided in random lengths between 15 and 25 feet. The procurement allows for a quantity variance of plus or minus 10 percent. Delivery is required within 161 days, with an original required delivery date of June 3, 2027, and is specified as FOB Origin. The contract mandates strict adherence to technical specifications MIL-T-8808B and QAP 13873, with quality conformance and metal certification required via CDRLs. Inspection and acceptance will occur at the destination. Packaging and palletization must comply with RP001 and MIL-STD-129, while sampling will follow MIL-STD-1916 or ASQ H1331. Prohibitions are in place regarding the use of Class I ozone-depleting chemicals and the intentional addition of mercury. The award process may utilize automated award and includes a price evaluation preference for certified HUBZone small businesses, though offers utilizing additive manufacturing are ineligible. Invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-0944

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0737

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Sch. 80 A53B Seamless, Pipe

Solicitation # W911S227U0088

Solicitation W911S227U0088 is a fixed-price Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new black carbon steel, steam-rated, seamless pipe with beveled ends. The requirement consists of three line items: 1,407 feet of 2-inch pipe, 1,407 feet of 4-inch pipe, and 483 feet of 8-inch pipe. All materials must adhere to ASTM A53 Material Grade B standards and be provided in lengths of 21 feet plus or minus 1 foot. This acquisition is a Total Small Business Set-Aside, and the government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. Key compliance requirements include the submission of a manufacturer's spec sheet and a completed Buy American certification via Attachment 1 to avoid being rejected as nonresponsive. Deliveries must be shipped complete with no partial orders allowed, delivered F.O.B. destination to MCAAP, where drivers must present a valid real ID for access. The preferred delivery timeframe is within 30 days. Proposals must be submitted through the PIEE solicitation module and remain valid for 90 days. The contract incorporates various federal regulations, including the Buy American Balance of Payments Program, Wide Area Workflow payment instructions, and specific cybersecurity and telecommunications prohibitions.

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1875

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Seamless 21-6-9 Tubing

Solicitation # MB484555

Solicitation MB484555 is a fixed-price combined contract issued by the Department of Energy's Brookhaven National Laboratory for the procurement of 2,500 feet of seamless 21-6-9 (UNS S21900) tubing, with an allowable quantity tolerance of plus or minus 10 percent. The tubing must adhere to ASTM A269/A269M-25 standards, featuring a nominal outside diameter of 0.313 inches and a wall thickness of 0.035 inches. A critical technical requirement is that the tubing must be entirely seamless, as welded or welded and drawn options are strictly prohibited. The material must undergo eddy current testing and be delivered in 42-foot straight lengths to the BNL facility in Upton, New York, with shipping costs covered by BNL. Award will be granted to the lowest priced, technically acceptable offer. Bidders must provide the country of origin with their quotes and submit any questions regarding the statement of work to the contract representative by November 3, 2026, at 5pm EST, with a final response deadline of November 10, 2026. Required delivery documentation includes a certificate of conformance, a chemical composition report, and a quality inspection report. This procurement is governed by BSA Commercial Terms and is categorized under NAICS code 331210.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

145813 ERDIP and Appurtenances for the RTLU1 Project Work Areas 7,10,11

Solicitation # 232730

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1921

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1868

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2080

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This subcontract for the San Bernardino County Department of Public Works involves the fabrication and delivery of high-grade stainless steel reinforcement and 316L stainless steel tie wire for bridge projects. The selected provider will supply materials to prime contractors, ensuring all stainless steel rebar meets specific project requirements and adheres to ASTM A955 standards. Material certifications are mandatory to prove compliance with the required specifications. The solicitation was posted on August 18, 2026, with a response deadline of September 17, 2026. This procurement falls under NAICS code 331210 and is managed through the California state agency framework.

General Info

Subcontract for stainless steel reinforcement and tie wire for San Bernardino bridge projects.

Agency

California → San Bernardino County Department of Public Works

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of H14278.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Baker Boulevard Over Mojave River Bridge Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 18

subcontract

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → San Bernardino County Department of Public Works

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → San Bernardino County Department of Public Works

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies ASTM A955 stainless steel reinforcement and 316L stainless steel tie wire for prime contractors on San Bernardino County Department of Public Works bridge projects. Fabricates and delivers high-grade stainless steel rebar to project specifications. Requires material certifications proving compliance with ASTM A955. Delivers specified stainless steel reinforcement and tie wire.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS