Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Steel Pole Fabrication and Supply (80ft, Class H9)

Active

State & Local

Response Deadline11/03/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract focuses on the fabrication and supply of 80ft Class H9 steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The poles must meet a minimum capacity of 0716 ft-kips at ground level in accordance with NES Specification LSK-1230 and must be produced by an Approved Brand facility, such as Valmont or Sabre Co. The scope of work includes the delivery of finished, galvanized steel poles equipped with 1 inch jacking nuts and bolts. All hot dipped galvanization is required to comply with ASTM A123 standards. The solicitation was posted on October 20, 2026, with a response deadline of November 3, 2026.

General Info

Fabrication and supply of 80ft Class H9 steel poles for Nashville Electric Service.

Agency

Tennessee → Nashville Electric Service

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5399.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Steel Pole

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 08:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies fabricated steel poles for prime contractors on Nashville Electric Service (NES) utility projects. Fabricates 80ft poles with minimum 0716 ft-kips capacity at ground level per NES Specification LSK-1230. Supplies 1" jacking nuts and bolts. Requires an Approved Brand facility (e.g., Valmont, Sabre Co). Hot dipped galvanization must comply with ASTM A123. Delivers finished, galvanized steel poles with jacking hardware.

Similar Contracts

Same NAICS industry code

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this opportunity is Thomas Sheehan.

Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

Forklift Safety Cage SupplyThis subcontract involves the supply and delivery of one forklift safety cage for prime contractors working on Mississippi Department of Revenue Alcoholic Beverage Control facility projects. The required equipment must be compatible with either leased or owned forklifts and must adhere to all minimum agency specifications. The safety cage is to be delivered directly to the project site located in Clinton, Mississippi. The solicitation was posted on October 20, 2026, with a response deadline set for November 24, 2026, under NAICS code 332312.

MS DEPT of REVENUE

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Structural Steel & Metal FabricationsThis subcontract for Structural Steel and Metal Fabrications involves the fabrication and installation of structural steel and miscellaneous metal supports for prime contractors working on Columbus State Community College facility projects. The scope of work includes creating units from steel shapes, plates, and bars, as well as installing anchors and bearing plates for operable partitions. All materials must be treated with zinc-rich primer and galvanizing in accordance with ASTM B 633 standards. The project is categorized under NAICS code 332312 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 10, 2026. The final deliverable for this contract is the complete installation of the structural steel framing and metal supports at the designated college facilities.

Columbus State Community College

POSTED

about 19 hours ago

DEADLINE

Fabrication of Laser Firing Vessel (LFV) and Impact TankThis subcontract involves the fabrication of high-specification pressure vessels and containment tanks for prime contractors supporting the Texas A&M University BAM Range Phase II projects. The scope of work includes the welding, forming, and assembly of heavy-gauge metal vessels, specifically the Laser Firing Vessel, the LFV Connection, and the Impact Tank, utilizing high-strength alloys and precision metal forming tools. All fabrication must strictly adhere to the ASME Boiler and Pressure Vessel Code and Specialized Vessel Fabrication Specifications. The project is categorized under NAICS code 332312, with a response deadline set for November 3, 2026.

Texas A&M University

POSTED

about 19 hours ago

DEADLINE

Waste Container Supply and FabricationThis subcontract for Waste Container Supply and Fabrication involves the design, manufacture, and delivery of industrial-grade steel waste containers and dumpsters for prime contractors working on Brazos River Authority projects. The selected provider is responsible for ensuring all units meet specific durability and capacity requirements set by the authority, covering both the initial supply of containers and the replacement of any damaged units. The contract is categorized under NAICS code 332312 and requires the delivery of completed containers directly to the designated project sites. Interested parties must submit their responses by November 10, 2026, following the posting date of October 20, 2026.

BRAZOS RIVER AUTHORITY

POSTED

about 20 hours ago

DEADLINE

Lighting Transformer Bases and Breakaway Hardware SupplierThis subcontract agreement establishes a supplier for aluminum transformer bases and specialized breakaway safety bolts intended for lighting poles on City of Aurora, Illinois projects. The supplier is responsible for procuring specific hardware, including Valmont Breakaway Transformer Bases models TB1-17 and TB5-9, Pelco Transformer Base model TB2N-1, and Transpro Breakaway Bolts model SPM4100. All provided materials must be new and free from defects, with the scope of work covering the delivery of both the transformer bases and the associated hardware kits to prime contractors. Managed under the Engineering agency in Illinois, the contract is categorized under NAICS code 332312. The solicitation was posted on October 20, 2026, with a response deadline set for November 4, 2026. This arrangement ensures that critical safety and structural components for municipal lighting infrastructure meet the precise technical specifications required for city projects.

POSTED

about 20 hours ago

DEADLINE

Way Finding Signage FabricationThis subcontract for Way Finding Signage Fabrication involves the production of custom signage for prime contractors working on City of Savannah municipal projects. The scope of work includes the fabrication of sign substrates and frames through CNC routing, bending, and the application of weather-resistant coatings. To ensure durability and compliance, the contractor must apply UV-stable vinyl and reflective sheeting in accordance with MUTCD standards, with final delivery of all sign panels and posts to the designated installation sites. The opportunity was posted on October 20, 2026, with a response deadline of November 3, 2026. Classified under NAICS code 332312, this project supports infrastructure within the state of Georgia. Interested parties can find further details through the Georgia procurement portal under solicitation PE-62551-NONST-2026-000000243.

City of Savannah

POSTED

about 21 hours ago

DEADLINE

ASTM A36 Steel Adapter Blade SupplierThis subcontract involves the fabrication and supply of structural steel adapter blades and setup kits for prime contractors working on State of New Hampshire Das Purchasing projects. The supplier is responsible for cutting and punching adapter blades in 3-foot and 4-foot lengths using ASTM A36 Structural Grade hot rolled flat steel, ensuring specific top and bottom hole patterns are executed for 5/8 inch bolts. Additionally, the scope includes the assembly of 11-foot plow setup kits and the delivery of all finished steel components. To ensure compliance with state standards, the supplier must submit detailed shop drawings for approval by the NHDOT Highway Maintenance department. This procurement is managed through the New Hampshire Das Purchasing agency under NAICS code 332312, with a response deadline set for November 9, 2026.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 21 hours ago

DEADLINE

Fire Apparatus Compartment & Storage SupplierThis subcontract, managed by the General Services Administration's Supply Chain Management Contracting Division, involves the procurement of specialized storage compartments and hose-management hardware for fire apparatus projects at Fort Wainwright, Alaska. The supplier is responsible for sourcing and delivering hosewell compartments specifically designed for Rosenbauer apparatus, ensuring all hardware adheres to strict fitment and durability specifications required for fire service operations. The project falls under NAICS code 332312 and requires the delivery of completed hosewell compartments to support prime contractors. While the performance location is listed as Adak, the primary objective is to provide high-quality, compatible storage solutions that meet the rigorous demands of emergency response vehicles.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Waste Container Supply and MaintenanceThis small business set-aside subcontract involves the supply and maintenance of leak-proof waste containers for prime contractors working on Defense Commissary Agency projects. The scope of work requires the provision of 8-cubic yard containers featuring odor-sealing lids, as well as larger 30-40 cubic yard roll-off containers. All equipment delivered to designated sites must be functional, clean, and free of rust. To ensure compliance with OSHA standards and prevent unsanitary conditions, the contractor is responsible for performing regular sanitation cleaning using steam, soap, or detergent. This opportunity is categorized under NAICS code 332312 and is managed under the Department of Defense. Interested parties must submit their responses by November 19, 2026.

Defense Commissary Agency

POSTED

DEADLINE

Structural Steel Fabrication and SupplyThis small business set-aside subcontract involves the fabrication and supply of structural steel components for prime contractors working on US Army MICC-Fort Drum projects. The scope of work specifically requires the production of 14-gauge steel 8" x 20' double slope eave beams with a 1:12 pitch and 8" x 20' C-purlins. These components must meet brand-name or equal specifications and be finished with red iron, red oxide, or galvanized coatings. The contract is managed under the Department of Defense and requires strict adherence to the Buy American Act, including mandatory certification and identification of the country of origin for all materials. Interested parties must respond by October 27, 2026, for this project categorized under NAICS code 332312.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Structural Steel I-Beam SupplyThis small business set-aside subcontract through the Department of Defense involves the supply of new, hot-rolled structural steel I-beams for prime contractors working on US Army projects at the W6QM Micc-Ft Drum. The requirement consists of 120 total beams, specifically 60 W10x19 beams at 25 feet and 60 W6x25 beams at 20 feet. All materials must adhere to AISC 360-22 LRFD design standards and be delivered in good usable condition with only minor surface rust permitted. Compliance with the Buy American Act is mandatory, requiring the contractor to provide certifications and clearly identify the country of origin for all supplied steel. The project is categorized under NAICS code 332312 and is designated for performance in the 74501 zip code area.

W6QM Micc-Ft Drum

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of 8-Pin Octal Molded Plastic Relay SocketsThis subcontract involves the procurement and delivery of 8-pin octal molded plastic relay sockets for prime contractors working on Nashville Electric Service projects in Nashville. The required hardware must be equipped with solder lugs and meet specific technical compliance standards, specifically requesting Amphelon 77-M1P-8, Wirepro 77-MIP-8, or approved equivalent models. The solicitation was posted on October 20, 2026, with a response deadline of October 27, 2026. Falling under NAICS code 423610, the contract focuses on the supply of one 8-pin octal relay socket that adheres to all molded plastic specifications provided by the agency.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of ABB 200A Load Break Fuse HoldersThis subcontract involves the procurement and delivery of 24 ABB 200A LBU fuse holders designed for 200 Amp load break disconnect switches. These components are intended for prime contractors working on Nashville Electric Service projects in Nashville, Tennessee. The agreement mandates strict adherence to the ABB brand, explicitly stating that alternate brands will not be accepted. The successful provider is responsible for sourcing and delivering 24 completed units to the agency.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical Connector and Terminal SupplierThis subcontract agreement establishes a partnership for the supply of specialized electrical terminals and connectors to prime contractors serving the Nashville Electric Service. The scope of work specifically requires the provision of fully insulated vinyl female disconnects with NEMA tab dimensions of 0.032 x 0.250 inches for 22-18 AWG wire, as well as solderless vinyl insulated ring tongue terminals for 16-14 AWG wire. All materials must strictly adhere to NEMA specifications for tab sizing and be delivered to designated locations within Nashville. The opportunity is categorized under NAICS code 423610 and was posted on October 20, 2026, with a response deadline of October 27, 2026. Interested parties must ensure all specified quantities are met and delivered according to the requirements of the Nashville Electric Service.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supplier of Corning 12-Port ST MM Loaded AdaptersThis subcontract agreement establishes a partnership to supply specific fiber optic hardware for prime contractors working on Nashville Electric Service procurement projects. The selected vendor is responsible for sourcing and delivering Corning part number CCH-CP12-15T 12 Port ST Multi-Mode Loaded Adapters, which must be compatible with CCH-04U enclosures. To qualify for this contract, the supplier must maintain status as an authorized distributor of Corning products and ensure the physical delivery of the adapters to the designated location in Nashville. The procurement is categorized under NAICS code 423610 and is managed through the Nashville Electric Service. Interested parties must adhere to the timeline associated with the posting date of October 20, 2026, with a response deadline set for October 23, 2026. All coordination and submissions are handled via the official NES vendor portal.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of DB-9 to RJ45 Shielded Modular AdaptersThis subcontract agreement outlines the supply and delivery of DB-9 Male to RJ45 Female shielded modular adapters to prime contractors supporting Nashville Electric Service procurement projects. The provider is responsible for ensuring that all hardware strictly adheres to the part number accuracy specified in the ordering descriptions and must manage all logistics to deliver the physical components to the designated Nashville location. The contract is categorized under NAICS code 423610 and requires strict adherence to delivery timelines quoted in calendar days. Interested parties must note the response deadline of October 23, 2026, for this procurement effort managed by the Nashville Electric Service in Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Specialized Transport and Delivery of Steel PolesThis subcontract involves the specialized transportation and delivery of 80ft steel poles for prime contractors working on Nashville Electric Service projects. The selected provider must utilize flatbed trailers to transport two-piece poles on a single truck, employing a multi-layer strapping system that allows for the individual removal of layers. All deliveries are to be made to the NES facility in Nashville, Tennessee, with scheduling coordinated between Tuesday and Friday following a 24-hour notice. Qualified contractors must possess a valid CDL with oversized load endorsements to perform these services. The project falls under NAICS code 484220, with a response deadline set for November 3, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of 1-1/2 Ton Lever Type Chain HoistsThis subcontract agreement involves the supply of twenty 1-1/2 ton capacity lever-type chain hoists for prime contractors working on Nashville Electric Service procurement projects in Nashville, Tennessee. The required units must be constructed from high-impact steel and feature long handle gear cases, brake covers, and built-in overload detection devices located within replaceable handles. Each hoist must include 15 feet of 9/32 inch heat-treated alloy steel chain. To ensure compliance and safety, every unit delivered must be accompanied by an owner's manual, a warranty card, and a Certificate of Inspection and Test. The procurement is categorized under NAICS code 423830, with a response deadline set for October 27, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5402

Nashville Electric Service is soliciting bids for the procurement of 24 units of ABB 200A LBU fuse holders, specifically part number ABB AUTO 278C310A48, designed for use with 200 amp load break disconnect switches. This solicitation, identified as Z5402, strictly prohibits the use of alternate brands. Bidders are required to submit their proposals through the Bid Center by 2:00 pm local time on October 23, 2026. The award decision will be based on technical compliance and delivery speed, as vendors must specify their earliest delivery time in calendar days. Tiffany Caruthers serves as the primary procurement contact for this requirement. It is the responsibility of the vendor to resolve any discrepancies between the ordering description and part number with the buyer prior to the closing date.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5400

Nashville Electric Service is soliciting bids for the procurement of shielded modular adapters, specifically the L-COM RS9EMI8M model featuring a DB-9 male to RJ45 female configuration. This solicitation, identified as Z5400, strictly prohibits the use of alternate brands. Bidders are required to submit their proposals through the Bid Center by 2:00 pm local time on October 23, 2026. The award process will evaluate technical compliance with the specified part number and the earliest possible delivery time expressed in calendar days, as delivery speed may be a deciding factor in the award. The primary point of contact for this procurement is Tiffany Caruthers. Vendors are responsible for resolving any discrepancies between the part number and description by contacting the buyer before the closing date.

Electronic Connector Manufacturing

POSTED

DEADLINE

Solicitation # Z5398

Nashville Electric Service is soliciting bids for the procurement of 20 units of 1-1/2 ton capacity lever type chain hoists, specifically requiring the Harring L5LB015-LWH-15 model. The technical specifications mandate high impact steel construction with a long handle gear case, a brake cover, and a built-in overload detection device within a replaceable handle. Each unit must include 15 feet of 9/32 inch heat treated alloy steel chain with a hook. Essential deliverables for each hoist include an owner's manual with safety instructions, a product warranty card, and a certificate of inspection and test that explicitly lists the model and serial numbers. Bids must be submitted through the Bid Center by 2:00 pm local time on October 27, 2026. Alternate brands are strictly prohibited for this inquiry. A critical component of the proposal is the statement of the earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. All inquiries and clarifications regarding the solicitation should be directed to the procurement contact, Kyle Kegley.

POSTED

DEADLINE

Solicitation # Z5396

Nashville Electric Service is soliciting bids for the procurement of 8 pin octal molded plastic relay sockets featuring solder lugs. The required specifications are met by Amphenol part number 77-M1P-8, Wirepro part number 77-MIP-8, or an approved equal. Vendors proposing an alternate brand must specify the brand in the comments field and provide supporting descriptive literature. It is the responsibility of the vendor to contact the buyer for clarification regarding any discrepancies between the ordering description and part numbers prior to the closing date. Bids must be submitted through the Bid Center by 2:00 pm local time on October 27, 2026. A critical component of the proposal is the statement of the earliest delivery time in calendar days, as delivery speed may be a determining factor in the award. The primary point of contact for this solicitation is Shanna Faulk. Performance and delivery will take place in Nashville, Tennessee.

POSTED

DEADLINE

Solicitation # Z5399

Nashville Electric Service is soliciting bids for steel poles measuring 80 feet in length with a minimum capacity of 0716 ft-kips at ground level, equivalent to Class H9. The poles must be hot dipped galvanized according to ASTM A123 and adhere to the latest NES specification LSK-1230 for drilling and details. Each pole must include 1 inch jacking nuts and bolts for both the top and bottom halves. To be eligible, bidders must quote an approved brand and underline it in their submission, as alternate brands are not permitted. Bids must be submitted via the Vendor Web Portal by 2:00 PM local time on November 3, 2026, with quoted prices remaining valid through September 30, 2026. Delivery is a key evaluation factor, and bidders must specify their earliest delivery in calendar days. Deliveries are accepted Tuesday through Friday from 7:30 AM to 3:00 PM CST, with a strict prohibition on Monday deliveries. A 24 hour delivery notice is required via phone. Logistics requirements specify that poles cannot exceed two sections, and both sections of a two-piece pole must arrive on the same truck. Mixed loads are prohibited without prior approval and a submitted loading drawing. Additionally, multi-layer trailer loads must be individually strapped by layer to ensure safe unloading.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS