Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sterile Envelope Sealing and Kitting

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the assembly of sponges into sterile peel pouches, with two sponges per pouch, followed by boxing and final packaging into unit-of-issue packages containing 1200 units each. All work must be performed in a controlled cleanroom environment to maintain sterility and compliance with medical standards. The process includes rigorous seal integrity testing to ensure each pouch maintains a contamination-free barrier and full lot traceability is mandated to support quality control and regulatory requirements. The work is to be completed at Travis Air Force Base, California, with a zip code of 94535-1825. The contract is designated as a subcontract under NAICS code 322220 and is administered by the Department of Defense under the Medical Supply Chain MD Surg FSF. Proposals must be submitted by August 3, 2026, and the solicitation was posted on July 28, 2026. The work is intended to support military medical supply needs through a highly regulated and traceable packaging process.

General Info

Assemble two sponges per sterile pouch, box into 1200-unit units, cleanroom packaging at Travis AFB with full traceability.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

322220 - Paper Bag and Coated and Treated Paper ManufacturingView NAICS

Place of Performance

TRAVIS AFB, CA, 94535-1825, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Assembly of sponges into sterile peel pouches (2 per envelope), boxing, and final packaging into unit-of-issue packages (PG/1200EA), including seal integrity testing and lot traceability in a cleanroom environment.

Similar Contracts

Same NAICS industry code

Supply of New Corrugated Fiberboard Shipping BoxesThe contract requires the supply of new, unused corrugated fiberboard boxes specifically for packaging defense equipment, with strict adherence to military shipping safety standards and regulatory requirements; any previously used boxes are explicitly prohibited. The boxes must meet all technical and structural specifications mandated for the secure transport of sensitive defense materiel, ensuring durability, protection, and compliance throughout the logistics chain. The solicitation is issued under NAICS code 322220 and is structured as a subcontract opportunity by the Department of National Defence, Government of Canada. Performance is designated for locations in Alberta and Quebec, excluding the National Capital Region. The posting date is July 29, 2026, with proposals due by September 7, 2026, at 7:00 PM Eastern Time. Interested parties must ensure full compliance with all military packaging directives and deliver only pristine, factory-new containers suitable for high-security defense applications.

Department of National Defence

POSTED

DEADLINE

in about 1 month

Georgia-Made Products PreferenceThis contract favors the supply of archival folders, labels, binders, and other document management consumables that are manufactured in Georgia, ensuring preference is given to locally produced goods. The procurement is structured as a subcontract under NAICS code 322220, which pertains to paperboard container manufacturing, and is issued by Catoosa County Government under the Georgia-Made Products Preference initiative. All items must be sourced from Georgia-based manufacturers to qualify, reinforcing support for in-state industry and economic development. The solicitation was posted on July 28, 2026, with a firm response deadline of August 27, 2026, at 7:00 PM Eastern Time, giving interested parties approximately one month to prepare and submit proposals. The place of performance and other logistical details are not specified, but the requirement for Georgia manufacturing implies that delivery and compliance will be tied to the state’s production capabilities. Participation is open to subcontractors who can demonstrate that their products meet the state-made criteria, and the opportunity is accessible via the state’s procurement portal.

Catoosa County Government

POSTED

DEADLINE

Sustainable & Environmentally Compliant Packaging ServicesThe contract requires the provision of sustainable and environmentally compliant packaging services in accordance with FAR 52.223-23 and DLA RP001, emphasizing responsible material selection, adherence to MIL-STD-2073-1E preservation standards, and the complete elimination of prohibited substances. All packaging must meet strict federal environmental guidelines to ensure minimal ecological impact while maintaining the integrity and longevity of military supplies during storage and transport. The work is classified as a subcontract under NAICS code 322220 and is performance-based with a designated place of performance in New Cumberland, Pennsylvania, at ZIP code 17070-5002. Responses are due by July 31, 2026, with the solicitation posted on July 28, 2026, through the DLA DIBBS platform. The ordering activity is the ASC Supplier Oper AE and AF Division within the Department of Defense, and all proposals must demonstrate a clear commitment to environmental compliance and sustainable practices throughout the packaging lifecycle.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 20 hours

Specialized Packaging and Preservation ServicesThe contract entails specialized packaging and preservation services for medical strips, requiring their enclosure in sealed unit containers and outer shipping containers designed to prevent physical damage and environmental degradation. All packaging must adhere to military standards to guarantee the integrity and safety of the medical products throughout transit and storage. The work is focused on ensuring that the strips remain viable and undamaged under conditions typical of military logistics environments, with strict emphasis on protection from moisture, temperature extremes, shock, and contamination. This subcontract is issued under NAICS code 322220, indicating classification within the paperboard container manufacturing sector, and is managed by the Department of Defense through the Medical Supply Chain Pharm FSA. Performance is required at Robins Air Force Base, Georgia, with a zip code of 31098. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026. Participation is restricted to subcontractors meeting federal procurement requirements, with no specific set-aside designation stated, and all work must fully align with Defense Logistics Agency protocols as referenced through the official DIBBS platform.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Supply of Copying and Stabilization Process Paper (NSN: 6750014431166)The contract entails the procurement and delivery of six rolls of military-specification copying paper engineered with stabilization process properties, fully compliant with the National Stock Number 6750014431166. This requirement is classified under the DPAS-rated order system, indicating prioritized national defense procurement status. The paper must meet exacting military standards to ensure functionality in high-demand operational environments, particularly where document integrity and durability under stress are critical. The procurement is structured as a subcontract under the NAICS code 322220, which corresponds to the paperboard container and box manufacturing sector. The award is managed by the Defense Logistics Agency on behalf of the Department of Defense, and the contract is linked to the DIBBS system under the referenced identifiers, though the precise location of performance and point of contact are not specified. The solicitation was posted on July 28, 2026, and while the award details are accessible via a public DIBBS link, no set-aside provisions or additional procurement restrictions are indicated.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Copying and Diazo Paper (Commercial Item)The contract solicits the procurement and delivery of one page of copying and diazo paper, likely intended as a sample or placeholder to evaluate quality or suitability ahead of potential larger-scale supply requirements. This commercial item is governed under NAICS code 322220, which classifies it within the paper manufacturing sector, and it is issued as a subcontract under the Department of Defense through its Construction & Equipment T & IFO EQ office. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 10, 2026. Performance of the contract is required to be completed at Sheridan, Wyoming, with the zip code 82801-0000 indicating the specific delivery location. Although no point of contact or set-aside details are provided, the structure suggests a preliminary or testing phase in the procurement process rather than an immediate full-scale order.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Sustainable & Eco-Friendly Packaging SupplyAuburn University is seeking suppliers to provide sustainable packaging solutions that meet strict environmental standards, requiring materials to be recyclable, biodegradable, or designed with reduced material usage to align with the university’s commitment to sustainability. The contract is structured as a subcontract under NAICS code 322220, which corresponds to paperboard container manufacturing, indicating a focus on packaging products that minimize environmental impact. Bidders must submit responses by August 26, 2026, at 3:30 PM ET, with the opportunity posted on July 28, 2026, indicating a four-week window for proposal development and submission. All solutions must be rigorously vetted to ensure compliance with Auburn’s sustainability policies, though specific performance metrics or certification requirements are not detailed. The place of performance and contact information are not provided, but submissions are to be made through the university’s public bidding portal linked in the posting.

Auburn University

POSTED

DEADLINE

Specialty Packaging for Gaming ProductsThe Chickasaw Nation is seeking a subcontractor to design and produce durable, branded packaging for custom gaming products, specifically tuck boxes and retail cases tailored for playing card sets. The work requires high-quality materials and precise manufacturing to meet branding and functional standards, ensuring the packaging is both protective and visually appealing for retail distribution. The contract falls under NAICS code 322220, classifying it within the paper product manufacturing sector, and is open for proposal submission until August 10, 2026, with the solicitation posted on July 27, 2026. All work must be performed in accordance with the Chickasaw Nation’s specifications, though no specific location for performance is provided. Interested parties must respond through the Chickasaw Business Network’s bid board portal, with no set-aside status specified, meaning all eligible vendors may compete.

Chickasaw Nation

POSTED

DEADLINE

Supplier of Commercial Shipping ContainersThe contract seeks suppliers of durable, cost-effective commercial exterior shipping containers designed for the safe transportation of medical tubing via common carriers, ensuring protection and compliance during transit. The containers must meet industrial standards for resilience and affordability, suitable for repeated use in high-volume logistics environments. The solicitation is issued under NAICS code 322220, indicating a focus on paperboard container manufacturing, though the actual product is a robust shipping container, suggesting a specialized application within this classification. Performance is required at APO, ZIP 09227-0000, indicating deployment to military postal addresses, which implies international or remote operational support for medical supplies. This is a subcontract opportunity under the Department of Defense’s Medical Supply Chain Division, with a response deadline of August 3, 2026, and a posting date of July 27, 2026. There is no specified set-aside status, meaning any eligible supplier may respond. The contract emphasizes reliability and economic efficiency to support consistent medical logistics, particularly for sensitive components like tubing that require contamination-free and impact-resistant transport. Suppliers are expected to demonstrate proven capability in producing containers that withstand harsh shipping conditions while aligning with defense supply chain protocols. All proposals must be submitted through the DIBBS platform via the provided link.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sustainable & Environmentally Compliant Packaging ServicesThe contract solicits sustainable and environmentally compliant packaging services to support military shipment requirements, with strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging, marking, and labeling. The packaging must be recyclable and meet federal environmental guidelines while ensuring durability, security, and traceability throughout the logistics chain, specifically tailored for the Department of Defense’s operational needs. This subcontract is under the NAICS code 322220, indicating a focus on paper product manufacturing with an emphasis on eco-friendly materials and production processes. The opportunity is administered by the DLA Fleet Readiness Center Southeast, with performance required at the facility located in Jacksonville, Florida, ZIP code 32212-0103. The solicitation was posted on July 27, 2026, with responses due by August 4, 2026, allowing a seven-day window for proposals. While no set-aside type is specified, bidders must demonstrate technical compliance with military packaging regulations and a verifiable capacity to deliver sustainably sourced, certified packaging solutions at scale to support defense logistics operations.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Sustainable & Environmentally Compliant PackagingThe contract seeks the provision of sustainable, recyclable, or biodegradable packaging materials that meet federal green procurement guidelines and comply with MIL-STD-129 standards for labeling and shipment preparation. It is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 322220 indicating the focus on paper product manufacturing. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, with performance expected to align with Department of Defense requirements under the Strategic Acquisition Program Directorate. All materials must be environmentally compliant, and the place of performance and point of contact details are unspecified, but the procurement is accessible through the DIBBS platform via the provided UI link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Sustainable and Environmentally Compliant Products SupplyThe contract seeks the supply of packaging materials or components that comply with EPA-designated sustainable product standards as required by clause 52.223-23, ensuring environmental responsibility throughout the product lifecycle. It is issued as a subcontract under the NAICS code 322220, which pertains to paperboard container manufacturing, and will be performed in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on July 27, 2026, and all responses must be submitted by August 7, 2026, to meet the deadline. The contracting activity originates from the Active Devices Division within the Department of Defense, indicating a focus on sustainable packaging for defense-related applications. Suppliers must demonstrate adherence to federal environmental guidelines to qualify, and the contract emphasizes compliance over traditional cost-based selection criteria.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

WRENCH, OXYGEN, MEDICAL

Solicitation # SPE2DS-26-T-284L

A specialized wrench and chain assembly booster is specified for exclusive use on medical-grade oxygen bottles, serving as a critical line item component of the POGS-10 oxygen generator and microboost system. The item is directly linked to two end equipment NSNs—6530-01-505-0207 and 6530-01-500-8337—and is included on the U.S. Army assemblage list to support operational capabilities. It is procured in units of one each, with a required quantity of 357 units under purchase request 7017364088, and must be delivered within 131 days after award. The solicitation, identified as SPE2DS-26-T-284L, was posted on July 29, 2026, with responses due by August 4, 2026, and falls under NAICS code 339113 for medical equipment manufacturing. Bidders must clearly state the source and part number being supplied, and compliance with DLA packaging and technical quality requirements is mandatory, as outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from non-accepted supplies, and the point of contact for inquiries is Chandler Alvarez, reachable via email or phone. The place of performance is Jacksonville, Florida, with a zip code of 32212-0103.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

CONTROL, COAGULATION

Solicitation # SPE2DS-26-T-284A

This contract specifies the procurement of CONTROL, COAGULATION plasma control material designed for use with coagulation analyzers and HEMOCHRON JR PT cuvettes, supplied in a unit of issue consisting of 15 vials per package along with four protective sleeves. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. It is classified as a TYPE I (CODE C) medical item with a strict non-extendable shelf life of three months, and no more than 13 days may have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must clearly include the date of manufacture, expiration or retest date, contract number, and lot number. The item is subject to DLA packaging requirements and must be packaged in commercial-grade sealed containers that protect against damage and ensure safe, cost-effective delivery to the designated point of performance in APO, 09227-0000. Additionally, the contract incorporates technical and quality requirements from the DLA Master List, and sensitive defense information controls apply. The procurement is under contract SPE2DS-26-T-284A with a delivery deadline 84 days after award, and the NSN is 6550-01-519-5566.

Family Planning Centers

POSTED

DEADLINE

AIRWAY, NASOPHARYNGEAL

Solicitation # SPE2DS-26-T-283G

The contract specifies the procurement of 3 packages of nasopharyngeal airways, each package containing 12 units, for a total of 36 individual devices. The product is a 32FR rubber nasopharyngeal airway with an oblique curved tip and a flange at the proximal end, intended for medical use in airway management. All units must be individually sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest cost to the delivery point in Melrose, Massachusetts. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and all items must be labeled accordingly. Technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements are binding, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. The contract is issued under solicitation SPE2DS-26-T-283G by the Department of Defense’s Medical Supply Chain, with bids due by August 4, 2026, and delivery required within five days of award. Bidders must provide the source and part number being offered, and the NSN for the item is 6515-01-125-0122.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

SHEET, BURN-TRAUMA D

Solicitation # SPE2DS-26-T-283S

The burn-trauma dressing is a sterile, non-woven fiber sheet measuring 60 inches by 90 inches, designed to protect burn patients from infection by creating a barrier environment. It is latex-free and can be used either folded for targeted application or unfolded as a full-size emergency dressing. The item is packaged in cases of twelve units each, with the NSN 6510-01-733-6285 and a shelf life of 36 months that cannot be extended, governed by RS001 requirements for type I (code Q) items. Technical and quality standards referenced in this procurement are defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contract solicitation number is SPE2DS-26-T-283S, issued on July 29, 2026, with responses due by August 4, 2026. One case is required to be delivered within 20 days of award to the specified APO location, with Seth Tootell of the Department of Defense's Medical Supply Chain as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

MONITORING KIT, BLOOD P

Solicitation # SPE2DS-26-T-283L

The monitoring kit for blood pressure is a compact, lightweight device designed for accurate single-user readings, capable of storing up to 60 measurements. It includes an integrated wrist cuff compatible with adult wrists measuring between 5.3 and 8.5 inches in circumference and comes with two AAA batteries, a storage case, an instruction manual, and a quick start guide. Each unit is offered as a single item and must comply with commercial packaging standards, ensuring protection from damage during transit and safe delivery via common carriers. The packaging must meet Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all units must be sealed in suitable containers. The procurement is governed by DLA technical and quality requirements, with packaging and marking regulations strictly enforced. The National Stock Number is 6515-01-716-9209, with two units requested under purchase request 7017656270, requiring delivery within five days of award at JBPHH, HI. The solicitation, issued under SPE2DS-26-T-283L, was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain through the point of contact Dorothy Marquis.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

CANNULA, NASAL, OXYGEN

Solicitation # SPE2DS-26-T-283V

The contract specifies the procurement of sterile, disposable nasal oxygen cannulas with a nominal tube length of 84 inches, made from polyvinyl chloride (PVC), featuring a curved, flared tip and standard connector, designed for adult use with an over-the-ear style and latex-free construction. Each unit is packaged in quantities of 50 per box, with a unit of issue defined as PG/50 each, and the item is identified by NSN 6515-01-480-2308. The order quantity is two packaging groups, requiring delivery within five days of award. The item is classified as a TYPE I (CODE S) shelf-life item with a non-extendable shelf life of 60 months, and it must comply with DLA packaging and quality requirements. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the solicitation or award date. The item is subject to controls regarding covered defense information and requires removal of government identification from non-accepted supplies. Bidders must clearly state the source and part number being supplied, and the solicitation, issued under SPE2DS-26-T-283V, has a response deadline of August 4, 2026, with performance destined for Melrose, Massachusetts.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

CASE, MEDICAL INSTRU

Solicitation # SPE2DS-26-T-283Q

The contract is for the procurement of a hardigg industries, llc medical instrument case with part number AL2221-0605 and NSN 6545014983132, consisting of seven units delivered FOB destination within 20 days. The case features a lockable two-position telescoping handle and oversized wheels with external dimensions of 25 by 24 by 13.13 inches and is constructed of plastic polyethylene. All units must be packaged in commercial containers compliant with medical marking standard no. 1, which supersedes MIL-STD-129, ensuring protection against damage and safe delivery by common carrier at the lowest rate. The product is not regulated by the FDA. The contract incorporates technical and quality requirements referenced from the DLA Master List, and applicable packaging and marking standards must be strictly followed, including removal of government identification from non-accepted supplies. Bidder must specify the source and part number being supplied, and the unit of issue is each, with no tolerance for variance in quantity. The contract is issued under solicitation SPE2DS-26-T-283Q by the Department of Defense, Medical Supply Chain MD Surg FSF, with delivery to APO 09094-3219, and all documentation must align with DLA’s authorized unit of issue guidelines.

Ground or Treated Mineral and Earth Manufacturing

POSTED

DEADLINE

PAD, ELECTRODE, DEFIBRIL

Solicitation # SPE2DS-26-T-283N

The contract specifies the procurement of six sets of multifunction defibrillator electrode pads, designated by NSN 6515-01-605-9796, for use with Philips FR2 HeartStart defibrillators, manual defibrillators, and for ECG monitoring, external pacing, and synchronized cardioversion. The pads are designed for adult or infant/child patients and are compatible with preconnection to NSN 6515-01-603-0401 for routine self-testing. The supplier must be Philips North America LLC, with part number 989803149981, and must clearly identify the source and part number in all documentation. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container that ensures safe handling and delivery by common carriers at the lowest rate, with shipping containers suitable for export when necessary. Packaging must also align with ASTM D3951, but DLA Master List requirements take precedence. Each container must be labeled with the manufacturer name, CAGE code, date of manufacture prefixed by “MFD”, expiration or retest date, contract number, and lot number. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award. Delivery is FOB destination within 20 days of contract award, with zero tolerance for quantity variance. The shipment must be sent via the fastest traceable means, explicitly excluding parcel post, to the military delivery point in Kings Bay, Georgia. The required delivery date is July 30, 2026, and the contract is issued under solicitation SPE2DS-26-T-283N with a unit of issue of set (SE) at a unit price of $6.00 per set.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

THERMOMETER KIT, CLINIC

Solicitation # SPE2DS-26-T-283F

The contract specifies the procurement of two electronic clinical thermometer kits designed for human use, each equipped with a battery-powered digital display, predictive temperature measurement capabilities ranging from 89.6 to 107.6 degrees Fahrenheit, and powered by a 1.55 VDC button-type battery offering 200 hours of continuous operation. Each unit includes a wallet-type holder and a sleeve containing five disposable plastic probe covers for oral and axillary temperature readings. The units must be individually sealed in protective packaging to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible cost to the designated delivery point in Jacksonville, Florida. All items must be marked in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NSN 6515-01-331-7295 with a 20-day delivery requirement and is governed by technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced under RA001, RP001, and RQ011. The solicitation number is SPE2DS-26-T-283F, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with bids due by August 4, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-283C

The contract specifies the procurement of 2 packages, each containing 10 disposable tracheal tubes, for a total of 20 units, under NSN 6515-00-105-0815. Each tube has a 10.0 mm internal diameter, is 32 cm in length, features a radiopaque design for visibility under imaging, and includes an inflatable low-pressure high-volume cuff requiring a syringe for inflation and deflation. The tubes are sterile, intended for nasal or oral intubation, and designed as replacement tubes for tracheal anesthesia sets with a standard 15 mm connector. All units must be individually sealed in suitable containers to protect against damage and packaged in commercial shipping containers compliant with international carrier standards, ensuring safe delivery to APO 09604-6180 within 20 days of award. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, superseding all references to MIL-STD-129, with technical and quality requirements referenced from the DLA Master List. Bidders are required to supply the exact source and part number, and the procurement is governed by the solicitation SPE2DS-26-T-283C, issued by the Department of Defense’s Medical Supply Chain, with responses due by August 4, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

BRUSH, BRISTLE, DENTAL H

Solicitation # SPE2DS-26-T-284M

The contract specifies the procurement of a dental handpiece bristle brush designed for polishing around tooth necks and embrasures of plastic dentures, with a disk diameter of 0.719 to 0.781 inches and a stiff bristle composition mounted on a mandrel. The unit of issue is a package containing twelve brushes, and the item is identified by NSN 6520-01-056-7376 with a single-package quantity requested under purchase request 7017660470. Delivery is required within 20 days after award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-284M, was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339114 for dental equipment manufacturing, with performance and contact details centered at FPO with point of contact Olusola Emmanuel.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

VALVE, RESUSCITATOR

Solicitation # SPE2DS-26-T-283W

The valve resuscitator is a barrier system featuring three separate filtration layers and a one-way duck bill valve with ports on both the top and bottom, designed for adjustable pressure settings between 5 and 20 cm H2O. It includes a standardized 22mm ID connector compatible with any resuscitation bag flow diverter that has a 22mm connection and is individually packaged for sterile use. The unit of issue is a box containing ten units, each with a shelf life of sixty months. To ensure product integrity, no more than nine months may have passed from the manufacturer’s date to the delivery date to the government. The product is identified by NSN 6515-01-620-0444, with a purchase request for two boxes, requiring delivery within twenty days of award. Technical and quality specifications referenced under RA001, packaging requirements per RP001, and procedures for removing government identification from non-accepted supplies under RQ011 are governed by the DLA Master List of Technical and Quality Requirements. The solicitation is issued under contract number SPE2DS-26-T-283W, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain through the Office of Elizabeth Cruz, with performance directed to APO 09094-3219.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE