Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STIMULATOR, NERVE, TRANS

Active
SPE2DS-26-T-309ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This is a dual-channel, battery-operated transcutaneous nerve stimulator designed for pain control, featuring three operating modes—constant, width modulation, and burst—with adjustable pulse rate from 2 to 150 Hz and pulse width from 50 to 250 microseconds. The device delivers asymmetrical biphasic square-wave currents in constant current output mode, with burst mode delivering eight pulses per burst at two bursts per second. It includes a sliding amplitude control cover for safety and a permanently attached battery compartment, powered by a standard 9V E-block type 6F22 battery. The unit supports timer settings of continuous, 15, 30, or 60 minutes and comes with four leadwires and four electrodes, all permanently attached or bundled as part of the system. Its compact dimensions are 3.8 by 2.60 by 1 inch, and it is supplied with a carrying case and instruction literature. The full kit includes the Impulse 3000 device with part number IM3T, electrodes EERC200M, lead wires L00013, the 9V battery L00081, and carrying case L00055. The device is subject to Defense Logistics Agency packaging and quality requirements, and government identification must be removed from non-accepted supplies. All bidders must specify the source and part number being supplied, and the item is identified by NSN 6515-01-644-3653 with a purchase request quantity of two units delivered within 20 days.

General Info

Dual-channel battery-powered nerve stimulator with three modes, adjustable settings, and included electrodes, battery, and case.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus ManufacturingView NAICS

Place of Performance

BLD A5474 PRATT ST, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-309Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Vernon Stevenson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STIMULATOR,NERVE,TRANSCUTANEOUS
STIMULATOR,NERVE,TRANSCUTANEOUS
THREE-MODE; DUAL-CHANNEL; ADJUSTABLE; BATTERY-OPERATED; FOR PAIN
CONTROL; ADJUSTABLE PULSE RATE AND PULSE WIDTH; CONSTANT, WIDTH
MODULATION, AND BURST MODES OF OPERATION; SLIDING AMPLITUDE
CONTROL COVER FOR SAFETY; PERMANENTLY ATTACHED BATTERY COVER; POWER
SOURCE:9V BATTERY, E-BLOCK, TYPE 6F22;
CHANNELS: DUAL; WAVEFORM: ASYMMETRICAL<(>,<)> BIPHASIC SQUARE-WAVE;
FREQUENCY: 2-150 HZ;
IMPULSE WIDTH: 50-250 MICROSECONDS ADJUSTABLE;
OUTPUT: CONSTANT CURRENT;
CONTINUOUS: CONTINUOUS STIMULATION;
BURST: 8 PULSES PER BURST, 2 BURSTS PER SECOND;
NUMBER OF LEADWIRES: 4;
TIMER: CONTINUOUS, 15, 30, 60 MINUTES;
DEVICE DIMENSIONS: 3.8 IN X 2.60 IN X 1 IN;
INCLUDES:
IMPULSE 3000 DEVICE P/N IM3T,
ELECTRODES P/N
EERC200M (QTY 4),
LEAD WIRES P/N L00013 (QTY 4),
9V BATTERY P/N L00081<(>,<)>
CARRYING CASE P/N L00055,
AND INSTRUCTION LITERATURE
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-644-3653 Quantity: 2 EA Purchase Request: 7017736867QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-286G
The contract pertains to the procurement of nine units of a surgical connector, specifically a Diamond O2 Quick Connector with a DISS male fitting and check valve, constructed from corrosion-resistant metal for use as an oxygen tube fitting. The item is identified by NSN 6515-01-457-0271 and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, accessible via the DLA web portal. Packaging and marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport, with export compliance when required. The product must be delivered within five days of award to a designated military medical facility in San Antonio, Texas, under FOB destination terms, with destination inspection required upon arrival. All offerings must be submitted through the DLA Internet Bid Board System by the specified deadline, and bidders must clearly state the source and part number being supplied. Additive manufacturing is prohibited unless explicitly authorized, and alternate parts must be accompanied by complete data for both the original and substitute item. The solicitation is not a small business set-aside but may be subject to automated award if no first article test is required, and preference may be given to HUBZone concerns unless waived. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFAR) clauses governing cybersecurity, data safeguarding, whistleblower protections, prohibition of hazardous substances such as hexavalent chromium, restrictions on foreign-origin equipment, and requirements for electronic payment processing via Wide Area Workflow. Contractors are required to validate their representations in the System for Award Management, certify compliance with telecommunications equipment restrictions, and ensure all hazardous materials are labeled in accordance with OSHA’s Hazard Communication Standard. Payment instructions, inspection responsibilities, and contract administration details are tied to DLA Troop Support, with Dana Patrone as the designated point of contact. Compliance with MIL-STD-2073-1E and the DLA Master Solicitation Revision 105 is mandatory, and failure to meet marking, packaging, or technical specifications may result in rejection. All proposals must omit additive manufacturing components and include full manufacturer details to be considered for award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334510
New
Federal
Preventative Maintenance of MAV VU360 Ventilator SystemsThe contract requires the performance of preventative maintenance on MAV VU360 portable ventilator systems, including inspections, calibration, alarm testing, and firmware updates to ensure ongoing compliance with respiratory therapy and clinical standards. All work must be executed to maintain device reliability and safety in clinical environments, adhering to established healthcare protocols. The contract is classified as a subcontract under NAICS code 334510, which pertains to medical equipment and supplies manufacturing, and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. The opportunity was posted on August 4, 2026, with a response deadline of August 5, 2026, indicating a very short window for submission and suggesting urgency in securing qualified service providers. While no specific location is designated for performance, work is expected to support VA healthcare facilities nationwide, and the absence of a point of contact or detailed address implies the scope is broadly applicable across VA operations.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 22 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 334510
New
Federal
Preventative Maintenance of Carestation 650 Patient Monitoring SystemsThe contract requires the performance of scheduled preventative maintenance, calibration, diagnostics, software updates, and testing on Carestation 650 anesthesia and monitoring systems, ensuring full compliance with FDA regulations and manufacturer specifications. All work must be carried out to guarantee the continued operational integrity and safety of these critical medical devices used in patient care environments. The scope of services demands technical expertise in anesthesia and monitoring equipment, with strict adherence to regulatory and quality standards to maintain device accuracy and reliability. This is a subcontract under the Department of Veterans Affairs, managed by the 247-NETWORK Contract Office 7 (36C247), classified under NAICS code 334510 for medical diagnostic equipment manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 5, 2026, indicating a highly time-sensitive procurement process. The place of performance and contact details are not specified, suggesting work may be performed across multiple VA facilities, and the successful offeror must be prepared to deploy services as needed to meet federal healthcare operational requirements.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 22 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 334510
New
Federal
Blast Overpressure Sensor Supply
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
Federal
Supply of Automated Endoscope Reprocessor (AER) MachineThe contract involves the procurement of a single Advantage Plus AER unit equipped with an air compressor and compatibility with single-use Rapicide PA reprocessors, intended for automated endoscope reprocessing. The solicitation is issued under the NAICS code 334510, which categorizes the procurement within the medical and surgical equipment manufacturing sector, and is structured as a subcontract. The Department of Veterans Affairs, through its 242-NETWORK Contract Office 02 (36C242), is the responsible agency for this procurement, with no specific place of performance or point of contact detailed in the available data. The opportunity was posted on August 4, 2026, and responses are due by August 10, 2026, at 5:00 p.m., creating a six-day window for potential vendors to submit proposals. The procurement does not specify a set-aside type, indicating it is open to general competition without restrictions based on business size or category.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334510
New
Federal
High-Performance Real-Time PCR System SupplyThe contract calls for the supply of a high-performance Applied Biosystems QuantStudio 7 Pro Real-Time PCR System or an equivalent brand-name-or-equal instrument designed for high-throughput genomic analysis. The equipment must meet rigorous technical specifications necessary for accurate, scalable, and reliable real-time PCR applications in a research or clinical setting. The system is intended for use at a location in Temple, Texas, with a zip code of 76504-7176, and is procured under a subcontract arrangement through the Department of Veterans Affairs, specifically the 257-NETWORK Contract Office 17. The solicitation was posted on August 4, 2026, with a hard deadline for responses set for August 14, 2026, at 3:00 PM. The North American Industry Classification System code 334510 confirms the purchase falls under the manufacturing of medical, dental, and laboratory equipment. The contract does not specify a set-aside type and lacks detailed point of contact information, indicating the procurement is likely managed through established vendor channels or prequalified suppliers under the broader VA contracting framework.
257-NETWORK Contract Office 17 (36C257)

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334510
New
Federal
Diagnostic Instrumentation and Reagents SupplyThe contract titled Diagnostic Instrumentation and Reagents Supply involves the provision of critical laboratory equipment including PCR machines, centrifuges, and microscopes along with necessary reagents for the field detection of high-risk pathogens such as viral hemorrhagic fever agents. This subcontract is intended to support rapid diagnostic capabilities in resource-limited environments, specifically targeting the place of performance in Kampla, to enhance preparedness and response to outbreaks. The equipment and reagents must meet stringent performance standards to ensure accurate and timely identification of infectious agents under challenging field conditions. The solicitation was posted on August 4, 2026, with a firm response deadline of August 15, 2026, at 9:59 PM. It falls under NAICS code 334510, which classifies the manufacture of medical and diagnostic instruments. The contracting authority is the Department of State through its Acquisitions - Rpso Frankfurt office, indicating this effort is tied to international health security and diplomatic response initiatives. There is no set-aside designation specified, meaning open competition is permitted, and all prospective suppliers must be prepared to deliver fully functional, certified, and field-ready systems in compliance with technical requirements for pathogen detection in remote settings.
Acquisitions - Rpso Frankfurt

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
Federal
Ballast Monitoring System Supply and Integration
257-NETWORK Contract Office 17 (36C257)

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334510
New
Federal
6515--512-26-4-098-1206/Zoll Batteries Replacement (VA-26-00083419)
Solicitation # 36C24526Q0730
This procurement action, identified by solicitation number 36C24526Q0730 and titled 6515--512-26-4-098-1206/Zoll Batteries Replacement (VA-26-00083419), is issued as a restricted request for quotations under the Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside program, with the NAICS code 334510 and a small business size standard of 1,250 employees. The requirement is for the replacement of Zoll SurePower Rechargeable Lithium-Ion Battery Packs used to power defibrillators at the VA Maryland Healthcare System, specifically at the VAMC located at 10 N Greene St, Baltimore, MD 21201. The batteries must meet exact technical specifications including a 5.8 Ah capacity, high-density lithium-ion chemistry, RunTime™ Indicator, automatic calibration readiness, and the ability to store historical use and maintenance data; only new equipment is acceptable. The solicitation emphasizes that offers must include the product brochure, specifications, distributor letter (if applicable), country of origin, and a certification that all terms in the solicitation are accepted without modification. Proposal submissions must be sent via email to Alison.Klein@va.gov and William.Barton2@va.gov no later than 1:00 PM Eastern Time on August 14, 2026, and must include the offeror’s Unique Entity Identifier and, where applicable, Electronic Funds Transfer information. Responses received after the deadline or lacking required documentation will be rejected. The contract is governed by FAR 12 Simplified Acquisition Procedures, with award to be made without discussions and based on a comparative evaluation of technical capability, past performance, and price. The contracting officer retains the right to accept other than the lowest offer. Key FAR clauses incorporated include 52.212-1, 52.212-2, 52.212-4 (with a deviation as of October 2025), 52.225-4, 52.240-90, and 52.240-91, among others, with additional representations required under SAM including certifications related to child labor, trafficking in persons, Buy American compliance, and security prohibitions. The amendment to the solic
245-NETWORK Contract Office 5 (36C245)

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334510
New
Federal
Light Obscuration Instrument
Solicitation # 1333ND26QNB640309
The Bioprocess Measurements Group at NIST in Gaithersburg, Maryland is seeking a modernized flow imaging instrument with integrated light obscuration capabilities to replace two obsolete and unsupported systems currently in use. These outdated instruments hinder the group’s ability to generate data that is comparable with industry standards, limiting collaboration and compliance with regulatory requirements for characterizing challenging biologically or synthetically derived particles in drug products. The current industry reliance on flow imaging microscopy and light obscuration as compendial methods underscores the urgent need for an updated system that aligns with contemporary analytical practices, ensuring accurate, consistent, and interoperable particle characterization essential for biomanufacturing quality control. The solicitation, identified by number 1333ND26QNB640309 and published on August 4, 2026, is open for responses until August 14, 2026, and falls under NAICS code 334510 for medical and diagnostic laboratory equipment manufacturing. The contract is administered by the Department of Commerce through NIST, with primary point of contact Rene D. Edwards and secondary contact Robert Singman, reachable via phone and email provided. Both the solicitation and performance location are in Gaithersburg, Maryland, 20899, and no set-aside provisions apply, making it open to all eligible respondents. The updated instrument is critical for maintaining NIST’s leadership in measurement science and ensuring its standards remain relevant and applicable to the evolving biopharmaceutical industry.
Department Of Commerce Nist

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334510
New
Federal
6515--Vestibular Diagnostic Systems - Intent to Sole Source
Solicitation # 36C24226Q0886
The Department of Veterans Affairs, on behalf of the NJ VA Medical Center, intends to award a sole source Firm Fixed Price contract to e3 Diagnostics, Inc. for the procurement and installation of a Visual Eyes 525 3rd Generation Video Nystagmography system and associated vestibular diagnostic equipment at the Lyons Campus in Lyons, New Jersey. This action is justified under FAR Part 13.106-1(b) due to the necessity for system compatibility and the proprietary nature of the technology, which limits availability to a single manufacturer. Market research confirms e3 Diagnostics, Inc. as the exclusive authorized provider of these specific vestibular diagnostic systems, satisfying the public notice requirements under FAR 13.501. The equipment includes the VNG system with integrated vHIT Camera Edition, database software, ancillary devices such as the Air Fx 110V system and medical cart, and all necessary components for comprehensive vestibular assessment including caloric testing, saccade and pursuit analysis, torsional eye tracking, and rotational chair support. The contractor is responsible for uninstalling the existing end-of-life system, installing and calibrating the new equipment in Room S339 of Building 3, ensuring full operational functionality, providing on-site training customized to clinic protocols, and delivering all documentation and manuals. Installation must occur during business hours and be completed no later than 60 days after award or by September 1, 2026, whichever is later. The Government will provide the necessary space, electrical, and environmental conditions to support installation. All equipment must be original manufacturer product, as gray market items are strictly prohibited under Veterans Health Administration policy. While this notice is not a solicitation for quotes, responsible sources may submit a capability statement by August 14, 2026, to Patricia Tolini at patricia.tolini@va.gov; however, the Government retains full discretion to proceed with sole source award regardless of submissions.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334510
New
Federal
6515--Dry Eye Treatment System
Solicitation # 36C24426Q0860
The Coatesville Veterans Affairs Medical Center is seeking a vendor to supply a new FDA-approved medical device for the treatment of dry eye syndrome, meibomian gland disease, blepharitis, acne rosacea, and related eyelid and ocular surface conditions. The required system must utilize monopolar dual frequency radio frequency technology combined with electronic dynamic muscle stimulation to deliver uniform heating to deep eyelid tissues and restore proper orbicularis oculi muscle function. This dual modality enhances blood circulation, improves meibomian gland secretion, stimulates collagen production, and increases blinking efficiency without requiring anesthesia, numbing creams, or downtime. The device must be safe and effective for all skin tones, with no risk of depigmentation, and must include a touch screen interface, rounded electrodes designed for eye comfort, and automatic treatment presets. The system must be newly manufactured and fully compliant with all specified clinical and technical requirements, with no brand-name preference, though the Lumenis BE OptiLift System is referenced for comparable features. The vendor is responsible for delivering the complete system to Coatesville, PA, performing all assembly and installation in accordance with manufacturer guidelines, ensuring the unit is clean and fully functional, and providing comprehensive on-site training to medical staff during normal business hours. Environmental compliance is required, including removal of all packaging materials and execution of a recycling plan for cardboard and debris. Delivery must be scheduled at least seven business days in advance and completed within specified windows, excluding federal holidays. The solicitation, under NAICS code 334510 and referencing solicitation number 36C24426Q0860, is open to all responsible sources and is subject to Free Trade Agreements. Responses are due by August 14, 2026, and inquiries should be directed to Contract Specialist Jeff Mann of the Department of Veterans Affairs.
244-NETWORK Contract Office 4 (36C244)

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
BLADE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-307H
The contract specifies the procurement of a Miller Size 0 newborn infant laryngoscope blade, a sterile, disposable, fiberoptic device made of stainless steel and designed for use with standard fiberoptic handles. It is regulated by the FDA as a Class II medical device, requiring compliance with labeling, registration, listing, and GMP standards, though a 510(k) clearance is not mandatory. The item must be supplied by Henry Schein, Inc. under part number 8575362 or Dyna Med under part number A22195, and bidders must clearly identify the source and part number being offered. Packaging must conform to commercial standards and Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. The NSN is 6515-01-396-2848, with a unit of issue of each (EA), and the contract calls for delivery of one unit within 20 days FOB destination. Inspection and acceptance occur at the delivery point, with no tolerance for quantity variance. All packaging and marking must adhere to MIL-STD-2073-1E, and the solicitation is issued under SPE2DS-26-T-307H with a response deadline of August 10, 2026. The procurement is governed by DLA packaging and quality requirements, and any applicable defense information controls must be observed.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-307G
The contract specifies the procurement of 4 units of an oral airway device identified by NSN 6515-01-708-4612, described as a Guedel-style, smooth, flexible polyethylene oral airway with a reinforced bite block, designed for single-use applications. The device is color-coded for easy identification, non-sterile, and free from natural rubber latex, available in eight sizes with embossed measurements in millimeters for quick reference. All units must be individually sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe, cost-effective delivery to the designated point of performance in APO, 09126-3865. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly state the source and part number being offered. The procurement falls under the DLA Master List of Technical and Quality Requirements with specific references to RA001, RP001, and RQ011, governing technical compliance, packaging, and removal of government identification from rejected items. The solicitation issued under SPE2DS-26-T-307G has a response deadline of August 10, 2026, with delivery required within 20 days after award, and is sourced through the Department of Defense's Medical Supply Chain for surgical support.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-310K
The contract specification details a disposable adult electrocardiogram electrode with a nominal diameter of 2.000 inches, designed for use with defibrillator/monitor-recorder systems identified by NSNs 6515-01-582-4060 and 6515-01-582-4072. Each electrode features a high-tack foam backing, wet gel conductive medium, and a silver/silver chloride sensor, and is radiolucent for compatibility with imaging procedures. The product is packaged in quantities of five electrodes per package, with sixty packages per case for a total of three hundred electrodes per case. The unit of issue is PG/40 each, and the NSN 6515-01-701-8690 is referenced for procurement. Strict compliance with DLA technical and quality requirements is mandated, as outlined in the DLA Master List, with applicable revisions controlled by solicitation or award date depending on acquisition scale. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. The requirement is for two packages, with delivery due within twenty days of award, under solicitation SPE2DS-26-T-310K, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance at Fort Bragg, North Carolina. Bidders must clearly indicate the source and part number being offered, and all responses are subject to the procurement’s deadlines and federal acquisition regulations.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
FIRST AID KIT, SMALL CR
Solicitation # SPE2DS-26-T-308T
This contract is for the procurement of a single small craft naval gun response first aid kit, specified by NSN 6545-01-648-2690 and part number P/N 80-0418, manufactured by NORTH AMERICAN RESCUE, LLC. The kit consists of a lightweight, olive drab green outer bag constructed of 500D Cordura solution-dyed nylon, designed for durability and resistance to sand and water, with self-repairing zippers and silent 550 paracord pull loops. It includes two removable internal pouches secured via hook-and-loop fasteners, each equipped with antipilferage seals for security. The contents are two identical Naval Gun Response Aid Pouches (PN 80-0357), one Naval Gun Response Bag (PN 80-0417), and critical medical items including two 34 Fr and two 28 Fr nasopharyngeal airways, two surgical lubricants, two Combat Application Tourniquets, two 6-inch and two abdominal/stump emergency trauma dressings, two HyFin chest seals, two 7.25-inch trauma shears, four SAM Splint II devices, two three-inch elastic wraps, and two permanent markers. All components are required to be delivered within nine months of manufacture, and the kit is not regulated by the FDA. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to ASTM D3951 if non-hazardous, with DLA technical requirements taking precedence. Shelf life is 60 months and non-extendable. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity. The kit must be shipped via traceable means, not parcel post, and delivered to the specified FPO address. All packaging and labeling must conform to DLA’s packaging standards, and the vendor must specify the exact source and part number supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, GAUZE
Solicitation # SPE2DS-26-T-309P
The product is a proprietary non-woven cotton blend rolled wrapping gauze known as TACGAUZE, designed for superior fluid absorption and wound wrapping performance. It measures 4.5 inches in width and 120 inches in length, vacuum sealed and sterilized for single-use only. Each unit is identified by NSN 6510-01-676-3176, with a total quantity of two units required under solicitation SPE2DS-26-T-309P. The product must have a shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery to the government. All containers must be marked with the lot number and date of manufacture prefixed by MFD. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a protective container suitable for safe transit via common carrier to the delivery point in Raleigh, NC, with a 20-day delivery window. The supplier must specify the source and part number being offered, and all packaging and marking must meet DLA’s packaging and medical marking requirements as referenced in applicable technical and quality standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CONTAINER, SHARPS SHUTT
Solicitation # SPE2DS-26-T-309M
The container is a sharps shuttle storage unit designed for safe handling and disposal of medical sharps such as catheters and syringes used during emergency procedures. Constructed from unbreakable polypropylene with a ribbed texture for durability and grip, it features a one-piece red molded polypropylene top that includes a permanent locking mechanism to secure contents after final closure, while a temporary closure ensures containment during active use. The design meets the MMESO standardized joint product requirement and is intended for reliable, high-performance use in clinical environments. The unit is sold individually with the NSN 6515-01-518-8551 and must be supplied with clear identification of source and part number. Compliance is required with DLA technical, quality, and packaging standards, including provisions for removal of government identification from non-accepted supplies and potential handling of covered defense information. The solicitation is issued under contract SPE2DS-26-T-309M by the Department of Defense’s Medical Supply Chain, with a response deadline of August 10, 2026, and a required delivery within 20 days of award to FPO, 96677.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TESTER, LEAKAGE, COLONOF
Solicitation # SPE2DS-26-T-309A
The contract pertains to the procurement of a Tester, Leakage, ColonofiberScope, identified by NSN 6515-01-312-0897, with a unit of issue of each. The item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information requirements apply, and bidders are required to specify the source and part number being offered. The solicitation is for one unit under purchase request 7017735390 with a delivery deadline of 20 days after order. The solicitation number is SPE2DS-26-T-309A, issued on August 4, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, and performance is designated to FPO with a ZIP code of 96616. Primary point of contact is Colin Owens, reachable via email and phone provided.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DOPPLER, BLOOD FLOW
Solicitation # SPE2DS-26-T-307Y
The contract pertains to the procurement of a handheld Doppler blood flow device, specifically the Summit Doppler LifeDOP 150 Series equipped with an audio recorder and an 8 MHz vascular pencil probe, designed for non-display vascular assessment and requiring three AAA batteries. The unit is sold individually and must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is regulated by the FDA, necessitating a referral through EBS to a product specialist for confirmation prior to award, including details such as bidder and manufacturer information, part number, and item description. The National Stock Number is 6515-01-734-9276, with a requirement for four units to be delivered within twenty days of award to Hurlburt Field, Florida, under solicitation SPE2DS-26-T-307Y. Bidders are required to clearly specify the source and part number being supplied. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026. Covered defense information potentially applies, and all supplies must comply with DLA packaging and government identification removal requirements for non-accepted items.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details