This Solicitation opportunity from Wisconsin was posted on September 22, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Storm Water Pumping Station PLC Panel and SCADA Upgrade

Closed

PW-25018State & Local

Submission Closed10/13/2025, 01:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237120

New

SLED

WH Ford RTC Fueling System Repairs, Kentucky

Solicitation # W9128F27RA054

The WH Ford RTC Fueling System Repairs project is a design-build solicitation (W9128F27RA054) for comprehensive infrastructure upgrades at the Wendell H. Ford Regional Training Center in Greenville, Kentucky. This firm-fixed-price contract involves a wide array of technical repairs, including upgrading automatic tank gauges, repairing dispenser and offload island concrete, installing emergency fuel shut-off systems, and mounting leak detector probes on diesel above-ground storage tanks. Additional requirements include replacing canopy and fuel pipe coatings, installing concrete circulation pavement and splash blocks, replacing tank vents and roof penetration boot seals, and improving tank grounding and access platforms. All work must adhere to strict standards, including UFC, NFPA, ASTM, and MIL-STD-161H, with a specific focus on cybersecurity compliance and the Davis-Bacon Act for labor. Proposals are evaluated using the Lowest Price Technically Acceptable (LPTA) method, focusing on specialized experience, a detailed three-phase Gantt chart schedule, and a well-defined technical approach. Submissions must be divided into a technical volume and a separate pricing volume. The successful contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Quality control is paramount, requiring a three-phase control system and a final acceptance inspection conducted 14 days after the contractor notifies the government of completion. The project is managed by the USACE Omaha District, with payments processed through the Office of the Area Engineer via ENG Forms 93 and 93a.

Bristol Alliance of Companies

POSTED

DEADLINE

Mather Fueling System Repairs

Solicitation # PANNWD26P028176

The Mather Fueling System Repairs project, solicitation W9128F27RA045, is a design-build effort located at the Mather Army Aviation Support Facility in California. Managed by the USACE Omaha District, this firm-fixed-price contract is restricted as a total small business set-aside. The scope of work involves comprehensive repairs to AVGAS fueling systems, including the installation of sampling gauge hatches, mechanical gauges, and an automatic tank gauge system. Key construction tasks include recoating the tank exterior, replacing collision barriers, adding a full-length catwalk, and replacing audible and visual alarms. Additionally, the project requires the demolition and replacement of the POL operation building, relocation of a generator with a new concrete pad, repair of remote containment basin drainage, and various asphalt and concrete pavement replacements. The procurement utilizes the Lowest Price Technically Acceptable (LPTA) source selection method, evaluating proposals based on project experience—requiring three examples of projects exceeding 1 million dollars—and a detailed project schedule. The projected period of performance is 365 days. Contractors must comply with the Davis-Bacon Act for prevailing wages and adhere to strict regulatory standards, including UFC 3-460, OSHA, EPA, and DOT requirements. Deliverables include design documents in English units, as-built drawings, and a multi-stage inspection process consisting of punch-out, pre-final, and final acceptance inspections. Performance and payment bonds are required within 10 days of award.

POSTED

DEADLINE

Fuel Facilities Upgrades and Capacity Increase

Solicitation # EV9354

The Government of the Northwest Territories, through the Department of Infrastructure, is seeking submissions from qualified contractors for fuel facility upgrades and capacity increases in Sachs Harbour and Ulukhaktok. This solicitation, identified by number EV9354, focuses on critical infrastructure improvements within the Northwest Territories to enhance fuel storage and distribution capabilities. Interested parties must submit their responses by the deadline of November 26, 2026. The procurement process has included five separate addenda issued between October 15 and November 6, 2026, which provide essential updates to the project requirements. All inquiries and submissions should be directed to the designated Contract Administrator.

Government of the Northwest Territories

POSTED

DEADLINE

Hammerman Gas/Diesel Tank Replacement Gunpowder Falls State Park

Solicitation # BPM059366

This project, solicitation BPM059366, involves the removal and replacement of above-ground gasoline and diesel fuel storage systems at the Gunpowder Falls State Park Hammerman Area in Baltimore County, Maryland. The scope of work requires the contractor to provide all labor, equipment, and materials to remove existing tanks, dispensers, piping, electronic systems, concrete pads, and bollards. Key deliverables include the installation of new storage tanks, concrete pads, and side-mount dispensers, as well as the provision of temporary gasoline and diesel tanks with metered dispensers for the duration of the project. All work must adhere to strict safety and environmental standards, including NFPA 30, 30A, and 78, API standards 650 and 620, and Maryland Department of the Environment regulations, with backfill compacted to a minimum of 95 percent. The contract is a Small Business Reserve Procurement, limiting the award to certified small businesses. The basis of award is the lowest responsive and responsible total bid. Procurement goals include a 15.00% MBE and 2.0% VSBE participation rate, with liquidated damages applicable for failure to comply with MBE requirements. The state reserves the right to apply reciprocal preference for resident bidders. Final acceptance is contingent upon the approval of the Facility Manager and DNR Project Engineer, requiring the submission of an approved electrical inspection certificate, a disposal manifest for contaminated soils and equipment, and three sets of manufacturer manuals and as-built drawings. Invoices are to be submitted to the Maryland Department of Natural Resources in Annapolis, with payments typically issued within 30 days of receipt of a proper invoice.

POSTED

DEADLINE

PSO CB 50110 FK - Tank Down-Fitting and Associated Mechanical Works at PSO IC Site, KRL, Islamabad Division

Solicitation # CB 50110 FK

The Pakistan State Oil Company Limited, Islamabad Divisional Office, is soliciting bids for solicitation number CB 50110 FK regarding tank down-fitting and associated mechanical works at the PSO IC Site, KRL, in the Islamabad Division. This procurement is conducted in accordance with PPRA Clause 32 (1)(b). The submission window for electronic bids via the SAP Ariba Portal runs from November 5, 2026, to November 12, 2026, with daily submission hours between 08:30 AM and 02:15 PM. Eligible bidders must demonstrate adequate past relevant experience and financial capability. Mandatory requirements include being an active taxpayer with valid NTN and GST/PST certificates, providing the CNIC of the owner or authorized representative, and certifying that the firm is not blacklisted by PSO or any other entity. Additionally, vendors must certify they have not been involved in any fatal accidents during project execution within the last five years. All requests for tender documents must be submitted through the SAP Ariba Portal with a signed and stamped request on official letterhead, and any conditional or partial proposals will be rejected.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Publication - 100024987-26-33 - Dry Terrain - Coating Refurbishment Work on 20 KMs length of KMK Pipeline Sec III-IV

Solicitation # Doc343325638

Pak-Arab Refinery Limited has issued a sources-sought solicitation, identified by number Doc343325638, for coating refurbishment work on a 20 kilometer stretch of the KMK Pipeline Section III-IV. This project focuses on dry terrain maintenance and is located within Pakistan. The publication was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at [email hidden] or access further details via the provided Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

Publication - 6000015179-26-32 - Water Logged - Coating Refurbishment Work on 10 KMs length of KMK Pipeline Sec II

Solicitation # Doc343322735

Pak-Arab Refinery Limited is seeking sources for coating refurbishment work on a 10 kilometer section of the KMK Pipeline Sec II in Pakistan. This sources-sought publication, identified by solicitation number Doc343322735, focuses on addressing water logged areas to ensure the integrity of the pipeline infrastructure. The solicitation was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at the provided agency email or access further details via the official Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

WH Ford RTC Fueling System Repairs

Solicitation # W9128F27RA054

Solicitation W9128F27RA054 is a design-build, firm-fixed-price contract for fueling system repairs at the W.H. Ford Regional Training Center in Kentucky, managed by the US Army Corps of Engineers, Omaha District. This project is a total set-aside restricted to 100% small businesses under NAICS code 237120. The scope of work involves comprehensive upgrades to two 10,000-gallon above-ground storage tanks, including the installation of an emergency fuel shutoff station, leak detection equipment, and an upgraded automatic tank gauging system. Additional requirements include repairing concrete and pavement, recoating fuel system canopies and piping, replacing tank vents, and improving grounding systems and equipment access platforms. All work must adhere to EM 385-1-1 safety standards, as well as IBC, NFPA, and ADA accessibility guidelines. Proposals must be submitted electronically in two separate volumes: a technical volume covering specialized experience, a Gantt chart for the project schedule, and a technical approach, and a separate pricing volume. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award the contract. The proposal submission deadline has been extended to December 21, 2026, at 14:00 CST. Once awarded, the contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Compliance with the Davis-Bacon Act and Buy American requirements is mandatory.

POSTED

DEADLINE

726-6US-1330 - Leak Repair ProjectCaltrans District 7 has issued an encroachment permit to the Southern California Gas Company for a leak repair project located along State Route 150 at Rice Road in the City of Ojai, Ventura County. The scope of work involves excavation within the Caltrans right-of-way to repair and restore the affected area, which includes the implementation of necessary traffic control activities. The excavation is limited to a maximum depth of 48 inches, an average width of 24 inches, and a maximum length of 36 feet. This project will not require the relocation of any public utilities or the acquisition of new right-of-way. The initiative is managed by Caltrans in Los Angeles, with Mojgan Abbassi serving as the primary point of contact. The project is currently listed as a forecast with a posted date of November 4, 2026.

Caltrans, District 7 - Los Angeles

POSTED

DEADLINE

Raw Gas Pipeline Installation and OperationThis subcontract involves the design, installation, and operation of gathering lines and transmission pipelines for prime contractors purchasing raw gas from the Oil and Gas Development Company Limited in Rahimyar Khan, Pakistan. The scope of work encompasses comprehensive technical execution, including pipeline routing, trenching, welding, hydrostatic testing, and pipeline pigging, utilizing specialized pipeline spreads and welding rigs to deliver a fully commissioned and operational gas transmission system. All activities must strictly adhere to API standards and comply with the necessary energy regulatory permits required by Pakistani law. Interested parties should note that the response deadline for this opportunity is November 16, 2026, with the project falling under NAICS code 237120 for pipeline construction.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Natural Gas Pipeline Repair and Valve InstallationThis small business set-aside subcontract involves the repair and replacement of natural gas distribution piping and valves for prime contractors on Air Force projects at Offutt AFB. The scope of work includes repairing 6 inch HDPE lines, replacing 8 inch steel valves and flanges, and installing 2 inch isolation valves. Additionally, the contractor is responsible for performing line stops or pinching for isolation and installing necessary valve boxes and risers to deliver a fully pressure-tested gas distribution system. Technical compliance is critical, as the project requires certified welders and strict adherence to 49 CFR 192, API, ASME, and AGA standards. Managed under the Department of Defense, the opportunity falls under NAICS code 237120. Interested parties must submit responses by November 17, 2026.

POSTED

DEADLINE

Solicitation # GasLineRepair

The 55th Contracting Squadron at Offutt Air Force Base, Nebraska, is conducting a sources sought market survey to identify qualified contractors for the repair and replacement of gas distribution system components. The scope of work includes repairing gas leaks on 6 inch and 8 inch pipes and valves, as well as replacing components on 2 inch pipes and valves. Specific tasks involve repairing a 6 inch HDPE line near B479, replacing 8 inch valves and flanges near B73, and replacing a 2 inch isolation valve on the service line to B73. The project also requires the replacement or reconnection of cathodic protection and the installation of new valve boxes and risers marked for gas. The period of performance extends from the time of award until April 30, 2027. Due to base gas load requirements, the 8 inch valve replacement must be performed during warmer spring weather, specifically when temperatures show five consecutive days with lows above 40 degrees Fahrenheit and highs above 65 degrees Fahrenheit. All work must comply with 49 CFR 192, API, ASME, and American Gas Association standards, as well as ISO 9001 quality management processes. Contractors are required to provide welder certifications and perform pressure testing for at least one hour post-installation. This is a small business set-aside under NAICS code 237120. Interested parties must submit their capabilities package, including company information and socio-economic status, to the designated point of contact by 12:00 PM CST on November 17, 2026.

FA4600 55 Cons Pkp

POSTED

5 days ago

DEADLINE

in 10 days

AI Contract Overview

The City of West Allis, Wisconsin, is seeking proposals for a comprehensive upgrade of its stormwater management control systems, specifically focusing on the storm water pumping station PLC panels and SCADA systems. The project involves designing, assembling, programming, and deploying new automation technology to replace the existing control infrastructure, thereby improving the monitoring, control, and alarm functionalities essential for effective stormwater operations. This upgrade aims to modernize the city's stormwater infrastructure, ensuring more reliable and efficient management during storm events. The solicitation, identified as PW-25018, was posted on September 22, 2025, with a response deadline of October 13, 2025. The project is estimated to have a contract value ranging from $500,000 to $1,500,000. It is managed by the Wisconsin Public Works department, and interested vendors can find additional details and submit responses through the designated online portal. The initiative emphasizes enhancing operational capabilities through advanced automation technology to support the city's stormwater infrastructure resilience and efficiency.

General Info

Agency

Wisconsin → Public Works

NAICS

237120 - Oil and Gas Pipeline and Related Structures Construction

Place of Performance

WI, USA

Set-Aside

NONE

Documents

rfp

High

conflict-of-interest-statement

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 22

Solicitation

Response DeadlineOct 13

Deadline has passed

Submission Closed

10/13/2025, 01:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyWisconsin → Public Works

ContactsNo contacts available

OfficeN/A

Organization / AgencyWisconsin → Public Works

Office AddressN/A

ContactsNo contact information available

Full Description

The City of West Allis, WI requires the design, assembly, programming, and deployment of a comprehensive storm pumping station SCADA and PLC upgrade system. This project involves the complete replacement of existing control systems with modern automation technology to enhance monitoring, control, and alarm capabilities for stormwater management operations within West Allis, WI.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS