This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STRAP, WEBBING

Closed

SPE1C1-26-T-1262Federal

Submission Closed06/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 315250

New

DIBBS

Supply of Webbing Straps (Safety Restraint Tethers)This subcontract through C and T Supply Chain involves the procurement of 17 specialized safety restraint webbing straps for the Department of Defense. The supplier is responsible for manufacturing or sourcing straps that meet NSN 8465016203362 while ensuring strict adherence to the Berry Amendment and the Buy American Act. All deliverables must be shipped FOB Destination to Grand Ledge, Michigan. Technical requirements include packaging according to RP001 and marking in compliance with MIL-STD-129 and ASTM D3951 standards. Additionally, the contractor must maintain DFARS cybersecurity standards to ensure the security of the supply chain. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0054

Solicitation SPE1C1-27-T-0054 is a Request for Quotations issued by DLA Troop Support, C and T Supply Chain, for the procurement of webbing straps, specifically safety restraint tethers (NSN 8465016203362). The requirement consists of two line items: CLIN 0001 for 10 units and CLIN 0002 for 7 units. The original required delivery date is October 27, 2026, with a delivery window of 20 days after receipt of order. Delivery is specified as FOB Destination to the Michigan Army National Guard AASF 1 in Grand Ledge, Michigan. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials must meet TQ requirement IP025. Inspection and acceptance will occur at the origin. The procurement is not a small business set-aside and falls under NAICS code 315250. Key regulatory requirements include the Berry Amendment, Buy American Act, and DFARS cybersecurity standards for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Seat Fabric and Upholstery Material SupplyThis subcontract opportunity, managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, focuses on the supply of seat fabric and upholstery materials. The scope of work involves providing military-grade textiles, leather, synthetic fabrics, high-durability automotive fabrics, foams, and stitching threads to prime contractors. A critical requirement of the contract is the provision of material certifications to guarantee full compliance with all referenced technical drawings for the delivered rolls of fabric and foam inserts. The procurement is designated as a Total Small Business Set Aside under NAICS code 315250. Interested parties must adhere to the timeline established by the posting date of October 25, 2026, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Oviedo Recreation & Parks T Shirts

Solicitation # city-of-oviedo-RFQ-102226-II-2027

The City of Oviedo Recreation and Parks Department in Florida is seeking proposals for the annual production of Athletics and Summer Camp shirts. This solicitation, identified as city-of-oviedo-RFQ-102226-II-2027, outlines a requirement for a vendor to handle the recurring manufacturing of apparel used for the department's seasonal and athletic programs. Interested parties must submit their responses by the deadline of October 29, 2026, at 6:00 PM. Primary coordination for this project is managed by Jacqueta Scott, with Lloyd Coleman serving as the secondary point of contact. Detailed bidding information and submission portals are available through the MyVendorLink platform.

City Of Oviedo — Recreation & Parks

POSTED

DEADLINE

Vest, High Visibility, No Markings

Solicitation # 202605058/A

The Royal Canadian Mounted Police (RCMP) is soliciting bids for the manufacture and supply of high-visibility vests with no markings, conforming to the CSA Z96-22 Standard as a non-FR Class 2, Level 2 garment. The requirement consists of a firm quantity of 240 vests across four size configurations (S/M, L/XL, 2XL/3XL, and 4XL/5XL) and an optional quantity of approximately 795 vests that may be exercised within 36 months of the contract award. The contract will be awarded to the lowest priced responsive bid, with pricing evaluated in Canadian dollars on a Delivered Duty Paid (DDP) Destination basis. The procurement is strictly limited to Canadian goods, defined as those wholly manufactured or originated in Canada or meeting CUSMA Rules of Origin. Bidders must adhere to strict ethical and environmental standards, including the prohibition of child and forced labor, the provision of living wages, and compliance with Green Procurement policies regarding environmentally preferable packaging. Technical specifications require a five-point tear-away design with 5 cm wide silver heat transfer retroreflective markings and bilingual labeling in English and French. The RCMP reserves the right to perform destructive testing on up to 2 percent of deliveries to ensure conformity with the specified requirements.

Royal Canadian Mounted Police

POSTED

DEADLINE

Supply of Army Branded Clothing

Solicitation # 0076

Unite Procurement UK Limited, acting for the Ministry of Defence, is seeking multiple suppliers to join the Unite Procurement Platform for the provision of standardised Army-branded clothing. The objective is to establish a professional and consistent identity for Arms and Services Engagement Teams during public-facing recruitment, travel, and outdoor activities. Each clothing package must include one quilted puffer jacket, one softshell jacket, one pair of stretch trousers, three moisture-wicking T-shirts, and three pairs of physical training shorts. The scope of work covers the manufacture, branding, packaging, and delivery of these packages as a one-off issue. The contract specifically excludes ongoing maintenance, repairs, laundering, or stock management. Interested suppliers should register their interest by contacting Unite Procurement UK Limited with details of their product range and capabilities. While there is an initial response deadline of November 2, 2026, the platform will continue to onboard suppliers on a rolling basis to maintain a competitive and flexible supply base.

UNITE PROCUREMENT UK LIMITED

POSTED

DEADLINE

RFSO 21C31-254242- Royal blue Interlock fabric and collars

Solicitation # WS5667657556

The Department of Public Works and Government Services is seeking offers to establish a Regional Individual Standing Offer for the supply of royal blue interlock fabric and collars to CORCAN-Correctional Service of Canada. These materials will be used for the production of inmate polo shirts, with orders issued on an as-needed basis. This opportunity is restricted to Canadian suppliers and suppliers of an Applicable Trading Partner, with performance taking place in Drummondville. The initial term of the agreement is for one year, with the potential for three additional one-year extensions. Interested parties must submit their responses by November 17, 2026, as late submissions will not be accepted. The solicitation is managed by the Government of Canada under solicitation number WS5667657556.

Department of Public Works and Government Services

POSTED

DEADLINE

PURCHASE OF BAND UNIFORMS

Solicitation # 26/27-0011

The Fontana Unified School District is soliciting proposals under solicitation number 26/27-0011 for the design, manufacture, fitting, and delivery of replacement marching band uniforms for its five comprehensive high schools. The procurement aims to replace obsolete attire with durable, high-quality, commercial-grade materials designed for a service life of approximately ten years. The scope of work includes comprehensive services such as design consultation, the submission of renderings for District approval, sizing, and post-delivery support. The District may award contracts by individual school site, multiple sites, or as a whole. All products must be delivered F.O.B. Destination to the District Warehouse in Fontana, California, with a final delivery deadline of May 24, 2027, or within 130 calendar days of the purchase order. The award will be based on the low bidder, provided the vendor is responsive and responsible. Bidders must maintain firm unit pricing through June 30, 2027, and provide specific documentation for any proposed substitutions. Required submissions include signed certifications regarding non-collusion, lobbying, and the Iran Contracting Act, with a response deadline of November 6, 2026, via the electronic procurement portal. Successful vendors must comply with California safety regulations, provide required insurance, and submit a Drug-Free Workplace Certification and COVID-19 Attestation of Compliance. Additionally, vendors delivering to school sites must maintain Mandated Reporter Certification. Payment will be issued within thirty business days following the actual delivery of goods.

Purchasing Department

POSTED

DEADLINE

Solicitation # SPE1C1-26-R-0089

Solicitation SPE1C1-26-R-0089 is a 100% Small Business Set-Aside for an IDIQ Firm Fixed Price contract issued by the DLA Troop Support C and T Supply Chain. The procurement is for Marine Corps men's dress and service trousers, specifically MC Green and MC Blue variants, conforming to MIL-DTL-32747. The contract includes a five-year ordering period with a total estimated quantity of 137,790 units for the blue trousers, distributed across five pricing tiers. Key technical requirements include the use of polyester/wool gabardine, adherence to specific shade evaluations via the DLA Product Testing Center, and the submission of pre-production samples for government approval. Award will be determined using Best Value Trade-off Source Selection Evaluation Procedures, prioritizing Product Demonstration Models (PDMs), followed by past performance assessed through the Supplier Performance Risk System (SPRS), and finally price. Proposals must be submitted via DIBBS in two separate volumes, with physical PDMs shipped via traceable carrier. Delivery terms are FOB Destination for tariff sizes and FOB Origin for special measurements, with the primary ship-to destination being the Travis Association for the Blind in Austin, Texas. Contractors must comply with the Berry Amendment and Buy American Act, utilize WAWF-RA for electronic invoicing, and adhere to strict RFID tagging and labeling standards.

POSTED

DEADLINE

USPP - 18225 - USPP Requirement for Dress Blouses and Uniform Items Not Available on the NPS Uniform ContractThe Department of the Interior is forecasting a requirement for the US Park Police to procure dress blouses and various uniform items that are currently unavailable through the existing NPS Uniform Contract. This procurement is categorized under NAICS code 315250 and is intended to fill specific clothing gaps within the agency's uniform inventory. The forecast was posted on September 2, 2026, and is managed by the National Park Service. Interested parties can coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this requirement.

POSTED

DEADLINE

USPP - 17035 - Body Worn Cameras Generation 4 with Accessories, Licenses, and Data Storage for the US Park PoliceThe Department of the Interior is seeking a provider for the US Park Police Body Worn Camera program. This requirement involves the procurement of annual licenses and data storage fees to maintain current operations, as well as the purchase of Axon Body 4 cameras and necessary accessories, such as docking stations and molly mounts, to equip new hires in fiscal year 2027. This opportunity is listed as a forecast under NAICS code 315250. Interested parties can coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this acquisition.

POSTED

DEADLINE

USPP - 17557 - USPP Requirement to Purchase and Install PIT Equipment on LE VehiclesThe Department of the Interior is seeking a Blanket Purchase Agreement for the US Park Police to acquire and install Precision Immobilization Technique equipment on its law enforcement vehicles. This contract is structured with a base year and subsequent option years, focusing on enhancing the ability of officers to perform successful PIT maneuvers while minimizing damage to the police fleet. The requirement is categorized under NAICS code 315250 and was posted as a forecast on September 2, 2026. Interested parties may coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this procurement.

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

The contract solicitation SPE1C1-26-T-1262 seeks three units of a safety restraint tether strap, webbing, identified by NSN 8465-01-620-3362, with a unit price of $3.00 per unit, totaling $9.00. The item, described as a 38-inch AWAE-OCP restraint, must be delivered within 20 days of contract award to the designated destination at W8NK MI ARNG AASF 1, 10700 W Eaton Hwy, Grand Ledge, MI 48837-9369, under FOB Destination terms. Quantity specifications are strictly fixed at zero variance, and delivery must be made via traceable shipping methods with no use of parcel post permitted. Inspection and acceptance occur at origin, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede standard commercial packaging guidelines such as ASTM D3951. Packaging must comply with RP001 DLA Packaging Requirements for Procurement and MIL-STD-129 for marking and labeling, with unit pack quantity set at one per unit. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025, and if non-hazardous, commercial packaging standards apply as long as they comply with DLA requirements. The contractor must ensure no intentional addition of mercury or mercury-containing compounds comes into contact with the product, except for approved functional uses such as batteries, sensors, or controls as specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must have a secondary containment boundary. All packaging must be fully compliant with hazard communication standards, and hazardous material containers must be labeled according to 29 CFR 1910.1200. The contract incorporates multiple Federal Acquisition Regulation clauses including those on small business representation, employment eligibility, combating trafficking in persons, sustainable products, and hazardous material identification. Contractors must be registered in the System for Award Management and maintain current certifications, including socioeconomic status representations relevant to the NAICS code 315250, which designates this as a small business set-aside. Invoicing and payment are processed electronically through the Wide Area Workflow system, requiring both an invoice and a receiving report, aligned with DFARS Appendix F. The solic

General Info

Procurement of three 38-inch safety tethers, delivered within 20 days to Grand Ledge, Michigan.

Agency

Department Of Defense → C AND T SUPPLY CHAIN

NAICS

315250 - Cut and Sew Apparel Manufacturing (except Contractors)

Place of Performance

10700 W EATON HWY, GRAND LEDGE, MI, 48837-9369, USA

Set-Aside

NONE

Documents

RFQ SPE1C1-26-T-1262 Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedMay 28

Solicitation

Notice updatedMay 28

NAICS code removed. The notice description changed. The point of contact changed.

Response DeadlineJun 8

Deadline has passed

Submission Closed

06/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

Office AddressUSA

Contacts

Jennifer Scarpello

contact@example.gov

+1 (555) 000-0000

Full Description

STRAP,WEBBING
STRAP,WEBBING
SAFETY RESTRAINT,TETHER AWAE-OCP RESTRAINT 38"
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
HERESITE SAEKAPHEN INC 73159 P/N HERESITE B-31
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016946319 0001 EA 3.000
NSN/MATERIAL:8465016203362
DELIVERY (IN DAYS):0020
SPE1C1-26-T-1262
SECTION B
PR: 7016946319 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:1
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90M52
W8NK MI ARNG AASF 1
10700 W EATON HWY
GRAND LEDGE MI 48837-9369
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90M52
W8NK MI ARNG AASF 1
10700 W EATON HWY
GRAND LEDGE MI 48837-9369
US
MARKFOR
W90M52
W8NK MI ARNG AASF 1
10700 W EATON HWY
GRAND LEDGE MI 48837-9369
US
M/F: (TCN) W90M5261470006
RDD:
PROJ: TP 3
SUPP ADD: W80X71 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:06/01/2026
SPE1C1-26-T-1262
SECTION B
PR: 7016946319 PRLI: 0001 CONT’D

SPE1C1-26-T-1262 NSN/Part Number: 8465-01-620-3362 Quantity: 3 EA Purchase Request: 7016946319QTY: 3 Delivery: 20 days ADO