Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRINGER, AIRCRAFT

Active
SPE4A7-26-T-689DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 79 aircraft stringers with the National Stock Number 1560-01-124-4890. The contract requires delivery within 197 days after the order is placed, with performance located at Tinker AFB. The solicitation is open for responses until September 1, 2026. The contract is subject to strict technical and quality requirements, including CMMC Level 2 certification and specific DLA packaging and documentation standards. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additional mandates include configuration change management, inspection and acceptance at origin, and the protection of covered defense information.

General Info

DoD procurement of 79 aircraft stringers for Tinker AFB by September 1, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-689D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Sabrina Keyser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRINGER,AIRCRAFT
STRINGER,AIRCRAFT
ENGINEERING NOTES/EXCEPTIONS LOADED AS A DRAWING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE4A7-26-T-689D
SECTION B
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-124-4890 Quantity: 79 EA Purchase Request: 7017939472QTY: 79 Delivery: 197 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A1-26-T-2686
This solicitation is for the procurement of three air conditioning duct assemblies under solicitation number SPE4A1-26-T-2686 for the Department of Defense Aviation Supply Chain. The contract specifies a delivery timeline of 578 days after the order is placed, with performance located at Hill AFB. Offerors who are not already listed as acceptable sources must obtain source approval from the design control activity and submit the necessary technical data packages to the DSCR. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and sampling standards such as MIL-STD-1916 or ASQ H1331. Compliance with Cybersecurity Maturity Model Certification Level 2 and export control regulations under ITAR or EAR is required, meaning technical data cannot be exported without prior authorization. While Item Unique Identification is not required, the contractor must follow rigorous configuration change management and inspection protocols at the point of origin.
AVIATION SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-223R
This solicitation, issued by the Department of Defense under solicitation number SPE7MC-26-T-223R, is for the procurement of five body valve press regulating parts kits, identified by NSN 4820-00-968-6699. The contract is a total small business set-aside with a delivery requirement of 164 days after receipt of order. Performance will take place in Cherry Point, and the response deadline for interested parties is September 4, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, covered defense information protocols, and tailored higher level quality requirements for both manufacturers and non-manufacturers. A specific manufacturing exception allows the use of ASTM F 104-03 for non-asbestos gaskets instead of the superseded MIL-G-12803. Because DLA does not have a bidset available, alternate offerors must provide a complete data package for both approved and alternate parts.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
BODY ACTUATOR, VALVE
Solicitation # SPE4A5-26-T-349M
Solicitation SPE4A5-26-T-349M, issued by the ASC Supplier Oper OEM Division of the Department of Defense, is for the procurement of three valve body actuators, identified by NSN 1660-01-027-6037 and part number 83C05-1. The items are designated as critical application items and are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB by October 23, 2027, which is 428 days after the award. The contract requires strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Notably, Item Unique Identification is not required for this acquisition. Quality assurance is governed by sampling methods in accordance with MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is used. Inspection and acceptance will occur at the destination. The contractor must comply with significant regulatory requirements, including CMMC Level 2 self-assessment, NIST SP 800-171 cybersecurity standards for safeguarding covered defense information, and the Buy American Act. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The solicitation is managed by buyer Evgeny Korovin and requires submissions via the DLA Internet Bid Board System.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 336411
New
DIBBS
TURBINE WHEEL, AIRCR
Solicitation # SPE4A5-26-T-384M
This solicitation is for the procurement of five aircraft cooling turbine wheels under NSN 1660-00-574-3527 for the Department of Defense. The contract requires delivery within 573 days after order and specifies performance at Tinker AFB. It is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for packaging, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. The agreement includes strict security and compliance protocols, including CMMC Level 2 self-assessment and the protection of covered defense information. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
ADAPTER, AIR INLET, HEAT
Solicitation # SPE4A5-26-T-383B
This contract is for the procurement of two air inlet adapters for heat exchangers, identified by NSN 1660-01-269-4993 and Sikorsky part number 70500-02169-110. The order is issued by the Department of Defense under solicitation SPE4A5-26-T-383B with a required delivery date of August 12, 2026, and a delivery window of 10 days after order. Shipping is FOB Origin and destined for the Aviation Maintenance Center at Fort Rucker, Alabama. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 quality standards, CMMC Level 2 self-assessment, and specific supply chain traceability documentation. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination, and the contractor must utilize the fastest traceable shipping means, excluding parcel post.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336411
New
DIBBS
SHIELD, HUB, MAIN ROT
Solicitation # SPE4A5-26-T-385K
This contract is for the procurement of eight units of a main rotor hub shield, identified by NSN 1615001264072 and Bell Textron Inc part number 206-011-106-1. The item is designated as a critical application item. Delivery is required within 20 days, with a required delivery date of August 12, 2026. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, the Naval Air Warfare Center Air Division in Patuxent River, Maryland. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific palletization requirements following DLA procurement standards. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-687X
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of five air conditioning and heating duct assemblies, identified by NSN 1660-01-445-2167. The contract requires delivery within 623 days after receipt of order and adheres to DLA packaging requirements. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Consequently, the Defense Logistics Agency limits data distribution to contractors with an approved US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-203G
This contract is a solicitation for the procurement of four gaskets, identified by NSN 5330-01-138-4847 and part number 145DS025-20. The items are critical application components associated with Leonardo SPA Helicopters Division and Rubbercraft Corporation of California. The contract requires strict adherence to source control drawings and mandates that any offeror not listed as an approved source must obtain approval from the original equipment manufacturer. Key technical requirements include a non-extendable shelf life of 240 months and specific packaging standards to protect the items from ultraviolet rays using waterproof, greaseproof, opaque bags per MIL-DTL-117. The delivery is set for DLA Distribution Corpus Christi, Texas, with a required delivery date of June 1, 2027. Compliance with CMMC Level 2 certification, MIL-STD-130N for identification marking, and various DLA packaging and hazardous materials shipping regulations is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
Federal
sUAS Training Drone
Solicitation # FA302026Q0105
The 82d Contracting Squadron of Sheppard AFB is seeking quotes for a single Firm Fixed Price contract to provide sUAS Training Drones for use at Fort Leonard Wood, Missouri. This opportunity, identified by solicitation number FA302026Q0105, is a total set aside for small business concerns under NAICS code 336411. Interested contractors must submit all written questions by 13:00 PM CST on August 20, 2026. Final quotes are due via email to the designated primary and alternate contacts by 13:00 PM CST on September 1, 2026. All relevant documentation and amendments are available through the official notice.
FA3020 82 Cons Lgc

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
Federal
Accumulator Pneumat
Solicitation # SPE7L126R0122
This sources-sought notice issued by DLA Land and Maritime concerns the procurement of Pneumatic Accumulators under NSN 3040-01-499-0583. Currently, Senior Operations LLC is the approved source for this item, which carries a 3/C AMC/AMSC designation. The Department of Defense is seeking market information and additional potential manufacturers to identify new sources capable of producing these components. Interested parties are encouraged to complete a market survey and submit any information regarding potential manufacturers to the designated contract specialist by the response deadline of September 1, 2026. Companies interested in qualifying as an approved source must undergo a formal review through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. To be successful, a contractor must submit a comprehensive technical package demonstrating that their product meets or exceeds the quality and specifications of the original equipment manufacturer currently being procured by DLA Weapons Support Columbus. The responsibility lies entirely with the prospective contractor to provide all necessary documentation to prove technical competency and product equality during the approval process.
DLA Land And Maritime

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
Federal
Fixed-Wing Vertical Take-Off and Landing (VTOL) small Unmanned Aircraft System (sUAS) WingtraRay "or Equal
Solicitation # FA805126Q4007
Solicitation FA805126Q4007 is a 100% small business set-aside under NAICS 336411 for a Firm Fixed Price contract to provide the United States Air Force Civil Engineer Center with one fixed-wing Vertical Take-Off and Landing small Unmanned Aircraft System, specifically a WingtraOne Ray or equal. The requirement includes associated payloads, accessories, OEM-certified operator training, and technical support services. The system must be actively listed on the Blue UAS Cleared List, comply with various NDAA sections, and meet Category 3 Operations Over People standards. Key technical specifications include a maximum take-off weight of 6 kg or less, flight times exceeding 25 minutes, an IP 53 weather resistance rating, and an encrypted primary C2 datalink with an operational range greater than 3 km. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) method, where the total evaluated price serves as the sole discriminator among offerors who meet all minimum salient characteristics. Deliveries are to be made to the Air Force Civil Engineer Center in San Antonio, Texas, with all items requiring unique identification marking per MIL-STD-130. Offerors must be registered in the System for Award Management and use the Wide Area WorkFlow system for invoicing. Technical proposals are limited to 10 pages, and the procurement includes the appointment of an ombudsman to confidentially address offeror concerns.
FA8051 772 Ess Pkd

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
Federal
Freefly UAV
Solicitation # N6426726Q4256
The Naval Surface Warfare Center is seeking quotes for Freefly UAV commercial items under solicitation N6426726Q4256. This is a total small business set-aside requirement conducted as a combined synopsis and solicitation under FAR Part 12. Amendment N6426726Q42560001 has been issued to extend the solicitation period, correct the part number for CLIN 0019, adjust quantities for CLINs 0039 and 0062, and introduce new CLINs 0064, 0065, and 0066. This is an all-or-none requirement, meaning partial quotes will be considered unresponsive. The government will award a single purchase order to the responsible offeror providing the most advantageous proposal based on the criteria in sections L and M. Interested parties must be registered in SAM and submit their electronic proposals in PDF or MS Word format by the August 27, 2026, deadline. Performance will take place in Key West, Florida.
Naval Surface Warfare Center

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332911
New
DIBBS
PARTS KIT, VALVE
Solicitation # SPE4A7-26-T-648T
Solicitation SPE4A7-26-T-648T is a request for quotations issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 18 valve parts kits (NSN 1660-01-056-8974, P/N 651234-2). The contract specifies a delivery schedule of 521 days after receipt of order, with a required delivery date of January 24, 2028. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking and bar-coding. Because these are kits, they must be packaged in a single box with a detailed contents list including NSNs, part numbers, and quantities. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and the use of Class 1 ODS is prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding hazardous materials, radioactive material handling, and the safeguarding of covered defense information.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A7-26-T-688W
This contract is a solicitation issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of five Bran Wiring Harnesses. The required items are identified by NSN 5995-01-724-9722 and Celltron, Inc. part number C3-839, adhering to TDP Rev A Gen 1 specifications. The delivery is set for FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement includes a First Article Test requirement to ensure quality standards are met before full delivery. The primary delivery timeline is 493 days, with an original required delivery date of May 23, 2026. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA procurement requirements.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-650D
Solicitation SPE4A7-26-T-650D, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is a total small business set-aside for the procurement of 29 aircraft structural support components (NSN 1560-01-643-3025). The required delivery date is April 27, 2027, with the place of performance and delivery located at Tinker AFB, Oklahoma. The contract is designated as FOB Destination, though offers are submitted based on FOB Origin. Inspection and acceptance will occur at the origin, with the government serving as the responsible party. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging and marking standards such as MIL-STD-129 and ASTM D3951. Due to the nature of the components, the contract includes rigorous requirements for hazardous material identification, safety data sheets per OSHA standards, and prohibitions on hexavalent chromium. Furthermore, the item is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Cybersecurity compliance is required via CMMC Level 2 and DFARS 252.204-7012. All invoicing must be processed electronically through the Wide Area WorkFlow system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 336413
New
DIBBS
BRACKET ASSY, MATS, A
Solicitation # SPE4A7-26-T-649R
Solicitation SPE4A7-26-T-649R, issued by DLA Aviation on August 13, 2026, is a request for three units of Bracket Assy, MATS, A (NSN 1680015509403). The procurement is designated as a critical application item with a required delivery date of July 8, 2027, and a delivery timeline of 321 days. Delivery is set as FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain inspection systems compliant with SAE AS9003 or ISO 9001. Key requirements include CMMC Level 2 self-assessment, adherence to DLA packaging requirements (RP001), and marking and labeling per MIL-STD-129. Inspection and acceptance are conducted at the origin, with sampling following MIL-STD-1916 or ASQ standards, requiring zero non-conformances in sample lots. The contractor must also comply with specialized requirements for bare item marking, configuration change management, and hazardous material labeling per OSHA standards. All payment requests must be processed electronically through the Wide Area Workflow (WAWF) system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332919
New
DIBBS
HOSE ASSEMBLY, EMERGENCY LOCK
Solicitation # SPE4A7-26-R-0731
The Government is preparing to award a five-year Indefinite Quantity Contract for the HOSE ASSEMBLY, EMERGENCY LOCK, identified by NSN 1620-01-116-2354, with an estimated annual quantity of 40 units. The contract will be issued under FAR 6.302, limiting competition to a single approved source, Designed Metal Connections Inc. (CAGE 14798), due to the proprietary nature of part number 179-50074 and the lack of complete technical data within DLA Weapons Support - Richmond. No other qualified sources currently exist, and any contractor seeking to participate must first submit a Source Approval Request for review and approval by the assigned ESA. The item is classified as critical but not a Critical Safety Item, and export control regulations apply. Production units will be delivered FOB Destination with inspection and acceptance conducted at the origin. The estimated solicitation issue date is August 24, 2026, with proposals due by September 25, 2026, and contractors must be registered in SAM.gov to be eligible for award. The Government has determined that commercial item acquisition policies under Part 12 do not apply, but offerors may still indicate if their offering qualifies as a commercial item within 15 days of notice. The contract award will consider price, past performance, and other factors as outlined in the solicitation. All solicitation documents will be available exclusively through DIBBS in PDF format, with no paper copies provided. The contracting office is located in Richmond, Virginia, and points of contact are Christopher Rose and Jeremy Prince from DLA Aviation.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-645B
Solicitation SPE4A7-26-T-645B, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of 13 blind rivets under NSN 5320-01-340-6746. The contract requires delivery to the DLA Distribution Depot at Tinker AFB, Oklahoma, within 171 days after the date of award. The procurement is fully competitive and adheres to military and federal specifications, specifically NAS1669 and NAS1675 standards for aerospace threaded fasteners. The contract mandates strict quality and technical compliance, including origin inspection and acceptance. Packaging must conform to ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and RQ017 for bare item identification. Hazardous materials must comply with 29 CFR 1910.1200 and DFARS 252.223-7001, requiring the submission of Safety Data Sheets prior to delivery. All payments are to be processed through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses regarding small business programs, cyber incident reporting, and the prohibition of certain telecommunications equipment.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 336412
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE4A7-26-T-649W
Solicitation SPE4A7-26-T-649W is a request for quotations issued by the Department of Defense, specifically the DLA Aviation ASC Supplier Oper AE and AF Div, for the procurement of six commercial off-the-shelf intake air cleaner filter elements (NSN 2945-01-602-6779). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania with a required delivery date of January 14, 2027, and a lead time of 146 days after receipt of order. Shipping terms are established as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements according to ASTM D3951 and MIL-STD-129. Key compliance mandates include a CMMC Level 2 self-assessment for cybersecurity, the submission of Safety Data Sheets for hazardous materials, and the removal of government identification from any non-accepted supplies. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 336412
New
DIBBS
SEPARATOR, PARTICLE,
Solicitation # SPE4A7-26-T-688L
This solicitation, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of four particle separators, identified as commercial items with NSN 2945-01-660-2288 and Donaldson Company part number D004116. The contract requires delivery within 20 days, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The items are to be delivered to the 0404 CS BN CO A0 Rear Det at Fort Carson, Colorado. Compliance with several technical and quality standards is mandatory, including physical identification and bare item marking per RQ017, DLA packaging requirements per RP001, and marking standards according to MIL-STD-129. The procurement also incorporates general technical requirements from the DLA Master List and notes that covered defense information may apply. Shipping must be conducted via the fastest traceable means, specifically prohibiting the use of parcel post.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-687N
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of two aircraft skins identified by NSN 1560-01-442-6797. The contract requires delivery within 394 days after receipt of order and is categorized under NAICS code 336413. Performance is designated for Tracy, California, with a response deadline of September 1, 2026. The agreement incorporates strict technical and quality requirements, including specific DLA packaging, quality conformance inspection, and physical identification standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access the data. Covered Defense Information and specific inspection and acceptance protocols at the origin are also mandatory.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CABLE AND SHOCK RING ASSEMBLY, LANDING GE
Solicitation # SPE4A7-26-R-XA65
This contract, identified as SPE4A7-26-R-XA65, is a firm fixed price solicitation for one unit of a Cable and Shock Ring Assembly for landing gear, part number L44000-13-6. The procurement is a total small business set-aside issued by the Department of Defense through the ASC Supplier OE and AF Division. Delivery is required within 123 days after order, with inspection and acceptance occurring at the destination. The item is designated as a critical application item and must adhere to strict quality and technical standards, including DLA Master List requirements and CMMC Level 2 self-assessment for cybersecurity. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with MIL-STD-129 and RP001, utilizing ASTM D3951 for non-hazardous materials or specific hazardous material protocols if applicable.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-689E
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of 25 ring spacers under NSN 5365-01-481-2505. The contract requires delivery within 20 days after receipt of order, with the place of performance located in Pearl Harbor. Interested parties must respond by September 1, 2026, regarding solicitation number SPE4A7-26-T-689E. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging and marking standards. Notably, the contract involves covered defense information and requires CMMC Level 2 certification. Due to the nature of the technical data, the project is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive data.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE4A7-26-T-687Y
This contract is for the procurement of 14 units of a rod end clevis, identified by NSN 5340-01-584-7352 and Bell Textron Inc part number 214-060-318-111. This is designated as a critical application item. The delivery is set for 158 days after the order, with a need ship date of February 7, 2027, and a final required delivery date of July 30, 2028. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 quality standards and CMMC Level 2 self-assessment for cybersecurity. Key compliance requirements include supply chain traceability documentation, specific packaging and marking standards per MIL-STD-129, and sampling methods following MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details