Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

STRIP, SEALING

Active
SPE7M222R0009Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense's DLA Land and Maritime office has issued a Sources Sought Notice for information only regarding the anticipated procurement of approximately 21 units of the item with NSN 1720-00-078-3391, identified as a sealing strip used in Aircraft Launch and Recovery Equipment (ALRE) critical safety applications. This notice is not a solicitation for proposals, bids, or quotations, but is intended to gather market data to inform future acquisition decisions. The product is specified to meet detailed packaging and marking requirements, including compliance with MIL-STD-2073-1D for packaging and MIL-STD-129 for marking, with special instructions prohibiting mercury or mercury compounds in preservation and packaging materials. Packaging must also follow specific drawings and DLA packaging protocols, and shipment is expected to be FOB Destination with inspection and acceptance at the origin. Responses to this notice will help determine acquisition strategy, including potential small business set-aside status, which has not yet been decided. Interested suppliers are encouraged to express their interest by completing the attached Market Survey and submitting it to the designated buyer, Alisha Blanton, by May 16, 2022. The acquisition falls under NAICS code 332111 and will be administered from the DLA Land and Maritime office in Columbus, Ohio, with deliveries made to the DLA Distribution Center in Tracy, California. This early market engagement allows the Government to better define requirements and prepare for the forthcoming solicitation.

General Info

DLA seeks market data for 21 sealing strips, ALRE use, packaging per MIL-STD, responses due May 16.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

332111 - Iron and Steel Forging

Place of Performance

OH

Set-Aside

NONE

Documents

1

DLA Land and Maritime Market Research 1720-00-078-3391

DOC, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 21 EA of NSN 1720-00-078-3391. Item will be purchased IAW the following: Aircraft Launch and Recovery Equipment (ALRE) Critical Safety Item (CSI) Entwistle Company (20722), NAVAIR P/N: 613380-3 The anticipated packaging requirements are as follows: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP: 001 PRES MTHD:10 CLNG/DRY: Z PRESV MAT: ZZ WRAP MAT: ZZ CUSH/DUNN MAT: ZZ CUSH/DUNN THKNESS: Z UNIT CONT: ZZ OPI: M PACK CODE: U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. ZZ PACKAGING INSTRUCTIONS: PACKAGING SHALL BE IN ACCORDANCE WITH DRAWING 624961. EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. Material is anticipated to be shipped to: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US FOR TRANSPORTATION SEE DLAD PROC NOTE C19. The solicitation is anticipated to require FOB Destination and Inspection and Acceptance of the supplies and packaging at Origin. Whether or not this acquisition will be set aside for small businesses is yet to be determined. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Alisha Blanton, contact@example.gov, +1 (555) 000-0000 on or before May 16, 2022.

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
Aerospace Casting and Forging for Drag Brace NutThis subcontract involves the production and supply of 44 certified raw forged or cast blanks for Drag Brace Nuts, supporting prime contractors on projects for the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the use of aerospace-grade alloys to perform near-net shape casting or forging specifically for part number 204-011-144-003. The selected provider must ensure strict adherence to quality standards by providing comprehensive material certification, full traceability, and Source Approval Request documentation. Performance for this Department of Defense contract will take place in New Cumberland, Pennsylvania, under NAICS code 332111.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-27-T-0282
Solicitation SPE8EE-27-T-0282 is a request for quotation issued by DLA Troop Support, Construction & Equipment Manu & Con for the procurement of one hoisting adapter, identified by NSN 3940-01-122-8976. The contract is categorized under NAICS code 332111 and utilizes First Destination Transportation to optimize shipping costs. The required delivery date is July 20, 2027, with a need ship date of April 26, 2027, and a delivery period of 167 days after the order is placed. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Red River in Texarkana, Texas. The procurement incorporates stringent quality and technical standards, including the DLA Master List of Technical and Quality Requirements and ISO 9001:2015 compliance for manufacturers. Specific packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Cybersecurity compliance is mandated via CMMC Level 2 Self-Assessment and the application of covered defense information protocols. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the solicitation applies the Buy American Act and Berry Amendment for domestic sourcing and allows for a HUBZone price evaluation preference.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
ARMOR CMPST PANEL
Solicitation # SPE8E4-27-T-0173
Solicitation SPE8E4-27-T-0173 is a request for quotations for the procurement of 40 composite armor panels, identified by NSN 9535015692367. The contract is issued by DLA Troop Support, Construction and Equipment (Metals), with delivery required within 190 days of award. The need ship date is May 19, 2027, with an original required delivery date of May 31, 2027. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination. Strict packaging and marking requirements are mandated, requiring each armor panel to be individually packaged in a wooden box with sufficient cushioning and dunnage material to prevent movement, adhering to MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with DLA requirement RP001. The contractor must utilize the Wide Area WorkFlow system for electronic invoicing and payment. Compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information under DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment for domestic material restrictions.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
Aerospace-Grade Raw Material SupplyThis subcontract for Aerospace-Grade Raw Material Supply involves providing raw metal stock, forgings, or castings to prime contractors for the production of Valve Bodies under Department of Defense DLA supply contracts. The performance of this contract takes place in Cherry Point, and all supplied materials must strictly adhere to the Buy American Act and the Berry Amendment. A critical requirement of the agreement is the provision of full traceability for all raw materials. This includes the mandatory submission of Material Test Reports and Certificates of Conformance, particularly for items designated as Critical Safety Items. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-27-T-5009
Solicitation SPE4A6-27-T-5009, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for 178 each of straight headed pins, identified as NSN 5315-01-334-3810. This is designated as a critical application item and must be manufactured in accordance with non-government standards NASM20392 Revision 01 and NASM5673 Revision 1. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Sampling will be conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with acceptance requiring zero non-conformances. Delivery is required within 161 days after order, with FOB, inspection, and acceptance points all set at the origin. Supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. The government will not evaluate or award to offers utilizing additive manufacturing. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-27-T-0076
Solicitation SPE8E4-27-T-0076 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 48 metal bars, identified by NSN 9510015276320. These components, also described as long retaining rods without retaining rings, are intended for use in a Tactical Water Purification System. The procurement falls under NAICS code 332111 and requires the submission of quotes via the DIBBS system. Delivery is specified as FOB Origin with a required delivery date of March 22, 2027, and a need ship date of October 14, 2026, with a delivery window of 66 days after order. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including Metal Certification Contract Data Requirements Lists and DD Form 1423s. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 standards. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and are prohibited from using additive manufacturing processes unless specifically authorized.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-27-T-0095
Solicitation SPE8E4-27-T-0095 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 5 feet of cold drawn, annealed flat steel bars. The material must be 0.250 inches thick, 2.000 inches wide, and supplied in whole foot lengths between 6 and 20 feet. Delivery is required within 20 days after order, with inspection and acceptance occurring at the destination. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors, and a Certificate of Quality Compliance must accompany every shipment. The contract mandates strict adherence to technical and quality standards, including ASTM A681, ASTM A700, and MIL-STD-129 for marking. Required markings must be legible, waterproof, and include the contract delivery order number, NSN, and manufacturer details, with failure to comply serving as grounds for rejection. Packaging must follow MIL-STD-2073-1E and RP001 requirements. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates various DFARS and FAR clauses, including those regarding cybersecurity, the Buy American Act, and a price evaluation preference for certified HUBZone small businesses.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-27-T-1579
This procurement, solicitation number SPE7L1-27-T-1579, is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the acquisition of 149 units of Guide, Cam Follower, Folding Floor (NSN 5340-01-540-4920). The requirement is governed by NAICS code 332111 and specifies a need ship date of February 5, 2026, with an original required delivery date of April 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including TDP Rev D Gen 4 and specific Quality Assurance Provisions (QAP 13873 and QAP 16236). Quality compliance requires a Certificate of Quality Compliance and Metal Certification. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area Workflow (WAWF) for electronic invoicing. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. Additionally, the contract incorporates cybersecurity requirements under DFARS 252.204-7012 and prohibits the use of additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-27-T-0088
Solicitation SPE8E4-27-T-0088 is a Request for Quotations issued by DLA Troop Support for the procurement of 294 feet of round metal bar. The material must be Steel Comp 304, hot finished and annealed, with a diameter of 1.250 inches and supplied in whole feet lengths between 10 and 12 feet. This is designated as a critical application item with a reference weight of 4.270 lb/ft. Delivery is required within 152 days after order, with a need ship date of March 28, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates rigorous quality and identification standards, including the submission of a Certificate of Quality Compliance with every shipment. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, must be applied using waterproof, legible methods per MIL-STD-129 and ASTM A700. Packaging must adhere to RP001 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, and failure to comply with marking requirements is grounds for product rejection. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-27-T-0228
Solicitation SPE8E9-27-T-0228 is a request for quotations issued by DLA Troop Support for the procurement of 232 feet of flat chrome-molybdenum (4130) steel bars. The material must be 0.250 inches thick and 2.00 inches wide, supplied in whole foot lengths between 10 and 12 feet. This is designated as a critical application item and must comply with technical standards SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Delivery is required by May 23, 2027, with a need ship date of April 12, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict adherence to marking and packaging requirements is required, including compliance with MIL-STD-129 and ASTM A700; failure to provide legible, waterproof continuous identification markings—including the contract delivery order number, NSN, and heat/lot number—will result in the rejection of the product. Inspection and acceptance will occur at the destination, though source inspection is waived for approved QSL suppliers. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Offers must be submitted via the DIBBS system. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. A price evaluation preference is available for HUBZone Small Business Concerns, and the use of additive manufacturing for the produced items is prohibited unless specifically authorized.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
PIN, SPRING
Solicitation # SPE4A6-27-T-6963
Solicitation SPE4A6-27-T-6963 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of 69 units of spring pins, identified by NSN 5315-00-058-9765 and part number MS171560. The items are classified as critical application items and must be manufactured according to the current revision of part standard NASM171401 through 171900 (Revision 4) and reference drawing 13873 EI-000589765. Delivery is required by November 21, 2027, with a need ship date of May 14, 2027, and is established as FOB Origin. The shipping destination is DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. HUBZone small businesses may be eligible for price evaluation preferences.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 335999
New
Federal
Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335313
New
Federal
Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335313
New
Federal
Switch, Pressure
Solicitation # CM26239122
DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334310
New
Federal
HEADSET-MICROPHONE : NSN 5965-01-204-8505
Solicitation # SPE7MX26RX089
This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.
Audio and Video Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
Hatch, Marine
Solicitation # SPE7MX26RX102
DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.
Hardware Manufacturing

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 332912
Federal
VALVE, REGULATING, FL
Solicitation # CM26163006
DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

10 days ago

DEADLINE

in about 11 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332111
Closed
Federal
Shackles
Solicitation # 70Z08422RWOPL0003
LOG-9

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
STEEL FORGING
Solicitation # 70Z04022Q60490Y00
Sflc Procurement Branch 3(00040)

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
USS DYNAMIC (Anchor Chain)
Solicitation # N5005422Q0070
Mid Atlantic Reg Maintenance Ctr

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
53--PIN,SPRING
Solicitation # SPE4A622T13C8
DLA Aviation

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
47--STRAINER,SUCTION
Solicitation # SPE7M322T1130
DLA Land And Maritime

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
95--STRUCTURAL STEEL FOR YELLOWSTONE
Solicitation # 140P1422Q0026
Imr Northern ROCKIES(12200)

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
STEEL, PLATE
Solicitation # 2122402Y152134384
Sflc Procurement Branch 3(00040)

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
47--STRAINER ELEMENT,SE
Solicitation # SPE7M322T4919
DLA Land And Maritime

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
BUOY CHAIN AND BRIDLES
Solicitation # 7008
LOG-9

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
95--ARMOR CMPST PANEL
Solicitation # SPE8E422T1035
DLA Troop Support

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Closed
Federal
Tube forgings per drawing #12901305 Rev B (with dwgs/TDP)
Solicitation # W911PT22B0001
W6QK Acc Wva

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 332111
Awarded
Federal
Breech Block Forging
Solicitation # W911PT22Q0027
W6QK Acc Wva

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS