Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Structural Assessment and Permit Support Services

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves a structural engineering evaluation to determine the load-bearing capacity of a building to safely accommodate new rooftop antennas and associated equipment, with the primary goal of supporting permit approval under the California Environmental Quality Act. This assessment is essential to ensure compliance with safety standards and environmental review requirements, enabling the installation of telecommunications infrastructure without compromising structural integrity. The work is a subcontract under the NAICS code 541330, focused specifically on engineering services, and is tied to a project located in Rancho Santa Margarita, California. The evaluation will provide technical documentation necessary for regulatory submission and may include analysis of existing structural elements, load calculations, and recommendations for reinforcements or modifications if needed. The project is listed on the CEQA network with a posted date of June 8, 2026, indicating an advanced planning phase ahead of potential construction and permitting activities.

General Info

Structural evaluation for rooftop antennas in Rancho Santa Margarita to meet CEQA and safety requirements.

Agency

California → Orange County

NAICS

541330 - Engineering Services

Place of Performance

Rancho Santa Margarita, CA

Set-Aside

NONE

Documents

This scope was carved out of PA25-0068.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Use Permit PA25-0068

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 8

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Orange County

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Orange County

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Structural engineering evaluation to confirm building capacity for new rooftop antennas and associated equipment, supporting permit approval under CEQA.

Similar Contracts

Same NAICS industry code

Transportation Planning and Public Engagement

City of Fayetteville

POSTED

DEADLINE

in about 1 month

Walkability and Pedestrian Infrastructure Study

City of Fayetteville

POSTED

DEADLINE

in about 1 month

Traffic Engineering and Intersection Analysis

City of Fayetteville

POSTED

DEADLINE

in about 1 month

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330 for engineering services. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should direct inquiries to the primary point of contact, Sepideh Sippy Aria, to ensure all submission requirements are met by the closing date.

Kiewit Infrastructure West Co.

POSTED

about 1 hour ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets DBE certified firms to support the critical infrastructure and operational resilience of the utility agency within the state of California.

Aanko Technologies Inc.

POSTED

about 1 hour ago

DEADLINE

Structural Engineering Services (PE Certified)This subcontract for Structural Engineering Services supports prime contractors on projects for the La Habra Heights County Water District in Whittier, California. The scope of work involves performing structural calculations and anchoring designs specifically for 12-foot diameter vessels and valve tree supports. The selected provider is responsible for creating vessel-specific anchor bolt templates based on provided geotechnical reports. A critical requirement for this contract is that all deliverables, including calculations and templates, must be certified by a Professional Engineer registered in the state of California. Interested parties must submit their responses by November 25, 2026.

La Habra Heights County Water District

POSTED

about 5 hours ago

DEADLINE

Synthetic Environment Generation for AI TrainingThis subcontract for the U.S. Air Force focuses on Synthetic Environment Generation for AI Training, specifically providing high-fidelity synthetic imagery to prime contractors. The scope of work involves creating detailed 3D models of refueling aircraft and simulating various lighting and weather conditions to generate labeled ground-truth datasets. To execute these tasks, the contractor must utilize high-end 3D rendering engines such as Unity or Unreal Engine 5 and ensure strict compliance with DFARS 252.204-7012 security standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026. The final deliverables for this engagement consist of comprehensive labeled synthetic image and video datasets designed to enhance AI training capabilities.

POSTED

about 5 hours ago

DEADLINE

Advanced Thermal Management DesignThe Advanced Thermal Management Design subcontract is a U.S. Air Force project focused on the development of thermal packaging for laser systems. The selected contractor will be responsible for performing thermal modeling and CFD analysis, as well as the fabrication of liquid cooling loops and cold plates utilizing high-thermal-conductivity materials. The primary deliverables include functional thermal management prototypes and validated thermal analysis reports to support prime contractors. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on October 28, 2026, with a response deadline set for November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

BSAC Facility Readiness ContractorThe BSAC Facility Readiness Contractor is a subcontract opportunity under the General Services Administration's PBS Office of Leasing, specifically supporting GSA warehouse lease projects in Kennebunkport, Maine. The primary objective of this contract is to perform critical technical upgrades and finalizations for prime contractors to ensure facilities achieve Beneficial Substantial Asset Completion. Key responsibilities include executing final facility tuning, installing seismic bracing, and implementing energy-efficient upgrades to align with government sustainability and seismic standards. The ultimate goal of the engagement is to secure final BSAC certification and formal government acceptance of the asset. Interested parties should note the response deadline of November 11, 2026.

Pbs Office Of Leasing

POSTED

about 5 hours ago

DEADLINE

Cleaning System Hardware DesignThe Cleaning System Hardware Design subcontract is a U.S. Navy project focused on the design and prototyping of mechanical delivery systems for TDR Tank Level Indicator projects. The selected contractor will be responsible for creating CAD models and developing specialized delivery mechanisms, such as ultrasonic systems or sprayers, specifically engineered for tank environments. To successfully execute the contract, the provider must possess professional CAD software and rapid prototyping equipment to produce final engineering drawings, 3D models, and a functional physical prototype. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026. The project supports prime contractors within the U.S. Department of Defense to enhance the hardware capabilities of naval tank monitoring systems.

POSTED

about 5 hours ago

DEADLINE

Hypersonic Aerothermodynamics ConsultantThe Hypersonic Aerothermodynamics Consultant subcontract is a U.S. Air Force project focused on the computational modeling and simulation of non-oxygen based hypersonic ground test environments. The selected contractor will utilize CFD software such as OpenFOAM or ANSYS Fluent on HPC clusters to model gas dynamics and simulate sensor interactions with hypersonic flow fields. Key deliverables include the production of detailed simulation reports and the development of validation models for prime contractors. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the nature of the defense work, the contractor must maintain strict ITAR and EAR compliance and adhere to NIST SP 800-171 and CMMC cybersecurity standards. Responses are due by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Cryogenic and Thermal Management EngineeringThis subcontract opportunity with the U.S. Air Force focuses on providing specialized thermal engineering analysis for high-enthalpy ground testing projects. The selected contractor will be responsible for the thermal modeling and design of vacuum jackets and cryogenic cooling interfaces intended to protect imagers from extreme heat environments. Technical execution requires proficiency in ANSYS or COMSOL to produce detailed thermal analysis reports and cooling system design specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Water Treatment Process Upgrades

POSTED

DEADLINE

Landscape Design and Site Planning

POSTED

DEADLINE

Flood Damage Prevention Compliance

City of Elk Grove

POSTED

DEADLINE

Grading and Erosion Control Plan

City of Elk Grove

POSTED

DEADLINE

Legal Description and Parcel Mapping Preparation

City of Elk Grove

POSTED

DEADLINE

Preliminary Engineering Design (30% Design) for Trail Infrastructure

Sierra Nevada Conservancy

POSTED

DEADLINE

Project Inspection and Quality Assurance

Calaveras County Water District

POSTED

DEADLINE

Civil Engineering (Hydrology & Sewer Capacity)

City of Bakersfield

POSTED

DEADLINE

Geotechnical & Seismic Engineering

City of Bakersfield

POSTED

DEADLINE

Signage Design and Engineering Services

City of Bakersfield

POSTED

DEADLINE

Structural Engineering for Residential Addition

City of South San Francisco

POSTED

DEADLINE

Structural Engineering for Floor Height Modifications

City of Palmdale

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS