This Government Contract opportunity from California was posted on July 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Structural Steel Fabrication and Erection

Closed

State & Local

Submission Closed07/20/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

ACE-0620-1199-00 Tower Design and Fabrication for Various RCAG/RTR Sites (TXK-A, GRI-B, and ARG)

Solicitation # ace-0620-1199-00-tower-design-fabrication-various-rcagrtr-sites-txk-gri-b-arg

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Texas, Nebraska, and Arkansas, specifically targeting the TXK-A, GRI-B, and ARG locations. This opportunity is open to a wide range of small business entities, including SDB, WOSB, HUBZone, VOSB, and SDVOSB certifications, under NAICS code 332312. Interested offerors must be properly bonded and insured to be eligible for the contract. Responses are due by September 25, 2026, and inquiries should be directed to the primary point of contact, Thomas Sheehan.

POSTED

DEADLINE

Supply of Commercial Hardware III IST - FCEBThis subcontract, issued by the Department of Defense through the Construction and Equipment Manufacturing and Construction agency, requires the manufacture or supply of 20 units of Commercial Hardware III IST - FCEB. The specific part number for this equipment is TLS3000 with CAGE code 1JA49, and all deliverables must strictly adhere to military packaging and marking standards. The procurement falls under NAICS code 332312. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 31, 2026. Further details regarding the solicitation can be accessed via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacture and Supply of Commercial Hardware III IST - FCEBThis subcontract involves the manufacture, packaging, and delivery of 80 precision commercial hardware components, identified by CAGE/PN 1NZ65 9510-1.0X3.04340, for the Department of Defense. The contractor must ensure all units meet strict military specifications, specifically adhering to ASTM D3951 and MIL-STD-129 for all packaging and labeling requirements. The project falls under NAICS code 332312 and is managed by Construction & Equipment Manu & Con. Performance of the contract will take place in Anniston, Alabama. Interested parties must submit their responses by the deadline of September 8, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe ASC Commodities Division of the Department of Defense is seeking a subcontractor for the fabrication and on-site erection of structural steel framework, which includes the provision of beams, columns, and connections. This project is categorized under NAICS code 332312 and will be performed in Tracy, California. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026. Interested parties can find further details and submission requirements through the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Commercial Hardware III IST - FCEB (CAGE/PN: 7Z049 S-2591)This subcontract, issued by the Department of Defense under the agency Construction & Equipment Manu & Con, involves the procurement and delivery of five units of Commercial Hardware III IST - FCEB, identified by part number S-2591 and CAGE code 7Z049. The contract requires strict adherence to ASTM D3951 packaging standards, as well as compliance with the Buy American Act and the Berry Amendment. The delivery terms are set as FOB Destination, with a required delivery window of 10 days following the award. This procurement falls under NAICS code 332312, with a response deadline of September 8, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Special Tooling and Equipment for Component FabricationThis subcontract with the Department of Defense, managed by the ASC Supplier Oper AE and AF Div, involves the design and fabrication of special tooling necessary for the casting or forging of a defense component. The contractor must ensure all deliverables comply with specific technical data and production readiness requirements to support the manufacturing process. The project is categorized under NAICS code 332312 and will be performed at Edwards AFB in California. Interested parties must submit their responses by September 8, 2026, following the posting date of August 31, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-25FT

This contract is for the procurement of 1,075 close tolerance screws under NSN 5305-01-203-5301. The items are designated as critical application items, and the solicitation identifies several approved sources and part numbers, including those from Reid Products, Fastener Innovation Technology, and Howmet Global Fastening Systems. Because there is no approved technical data package available from the government, the data is considered proprietary or insufficient for competitive procurement. The delivery requirement is 20 days after the order, with FOB, inspection, and acceptance all occurring at the origin. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. The contract incorporates various technical and quality requirements, including specific mandates for source approval requests, configuration change management, and the removal of government identification from non-accepted supplies.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2435

This contract, identified as SPE8EE-26-T-2435, is a procurement agreement between the Department of Defense and Uline Inc. for the supply of one unit of commercial hardware, part number H-963. The order is processed under purchase request 7016735914 and requires delivery within 10 days. The original required delivery date is set for May 11, 2026. The shipment is designated for delivery to the AWCF SSF Camp Carroll in Waegwan, Korea. Logistics requirements specify that the item must be packaged according to ASTM D3951 and labeled in accordance with MIL-STD-129. The terms establish that the FOB, inspection, and acceptance points are all at the final destination.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2432

Contract SPE8EE-26-T-2432 is a Department of Defense procurement for 20 units of commercial hardware, part number GLS507, supplied by New Pig Corporation based in Tipton, Pennsylvania. The order is designated as a non-NSN item under NAICS code 332312, with a required delivery date of May 21, 2026, and a delivery window of 20 days after the order. The shipment is set for FOB Destination, with both inspection and acceptance occurring at the destination point. Delivery is directed to the 9044 CS BN 60 CO A Distribution center at Camp Carroll in Waegwan, South Korea. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA packaging requirements for procurement and palletization standards.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-1085

This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of one air duct assembly under part number 1560-00-806-7161. The contract requires delivery within 680 days after the order is placed and specifies that inspection and acceptance will occur at the origin. The agreement includes strict compliance with several technical and security standards, including CMMC Level 2 certification and the protection of covered defense information. Additionally, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific training to access technical data. Physical identification and bare item marking are required, though item unique identification is not mandatory for this specific request.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPEA46-26-T-25LT

This contract is for the procurement of close tolerance screws, identified by NSN 5305-01-066-6750 and part number NAS1580A4T6. The order consists of two packages, with each package containing 50 units, for a total of 100 screws. This is designated as a critical application item that must be manufactured according to the current revision of the NAS1580 standard. Delivery is required within 20 days, with shipping and acceptance occurring at the origin. The agreement mandates strict adherence to DLA technical and quality requirements, including physical identification and bare item marking per MIL-STD-130N. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with final delivery destined for Borcea Air Base in Romania.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2428

Contract SPE8EE-26-T-2428 is a federal procurement for commercial hardware issued by the Department of Defense to I-Solutions Direct, Inc. The agreement specifies the acquisition of 36 feet of hardware under part number 9510-.937HEX303. The required delivery date is August 27, 2026, with a delivery window of five days after the order is placed. The shipment is designated for the Anniston Army Depot in Alabama, with freight terms set as FOB Destination. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and the contractor is instructed to use the fastest traceable shipping means, explicitly avoiding parcel post. The contract allows for a quantity variance of plus 10 percent and minus 0 percent.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract titled Structural Steel Fabrication and Erection encompasses the complete fabrication and on-site assembly of structural steel components for buildings or bridges, requiring precise engineering and skilled labor to meet specified design standards. Work must be executed in accordance with industry best practices for safety, quality, and timeliness, with all materials and processes compliant with applicable codes and regulations. The effort is classified as a subcontract under NAICS code 332312, indicating specialized metal fabrication services for construction projects. The solicitation was posted on July 1, 2026, with a firm deadline for responses set for July 20, 2026, at 9:00 PM Pacific Time. The contracting entity is the Procurement Services Division under the State of California, though specific location details for performance or agency office are not provided. All work is expected to be performed at an undetermined site within California, and interested parties must submit proposals through the provided online portal before the deadline. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors without restrictions based on business size or ownership type.