This Government Contract opportunity from Mississippi was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Structural Steel Fabrication and Erection

Closed

State & Local

Submission Closed07/28/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

DIBBS

Manufacture of Air Conditioning Duct AssembliesThe contract requires the fabrication, assembly, testing, and certification of duct assemblies specifically designed for military air conditioning and heating systems, with strict adherence to military specifications to ensure operational reliability and environmental compatibility. All deliverables must be fully traceable through verified CAGE codes and part numbers to maintain accountability throughout the supply chain and support long-term maintenance and logistics requirements. The work is classified as a subcontract under NAICS code 332312, indicating the focus on HVAC equipment manufacturing, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense to support critical defense infrastructure. Bid responses must be submitted by the deadline of September 3, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or certification status. The place of performance details are not provided, suggesting the work may be performed at the contractor’s facility or other approved locations, subject to approval. The contract is accessible via the DIBBS portal under solicitation number SPE4A526R0251, where full technical requirements and compliance documentation can be obtained. Successful bidders must demonstrate proven capability in military-grade HVAC component manufacturing and quality control processes to meet the rigorous standards expected by the DoD.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Loop Clamp Supply (Hardware Manufacturing)The contract entails the manufacture and supply of loop clamps identified by NSN 5340014799054 and part number 2290HX, produced to meet exacting military specifications. The items must be fully compliant with government packaging and delivery standards to ensure readiness for military logistics and deployment. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the Small Business Administration. The North American Industry Classification System code is 332312, indicating the work falls under the forging and stamping industry sector. The solicitation is administered by the Strategic Acq Program Directorate under the Department of Defense, with a response deadline of August 18, 2026, and was posted on August 3, 2026. All deliverables must be fulfilled in accordance with the requirements specified by the contracting office, with performance expected to align with defense supply chain protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9157

This contract pertains to the procurement of a DIAL, CONTROL item under solicitation SPE7LX-26-U-9157, with a total quantity of 224 units to be delivered FOB origin within 99 days. The item is classified as a critical application item and is subject to stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, including palletization standards, and all markings and labeling must adhere to these directives. The contract prohibits the use of ozone-depleting chemicals and any intentional introduction of mercury or mercury-containing compounds, except for specific functional uses such as in batteries, fluorescent lights, and authorized instruments under NAVSEA guidelines, with additional containment requirements for portable mercury-containing devices. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes C03 from August 2016, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 332312, with a response deadline of August 18, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Unit of issue is each, with firm quantity and no variance allowed. The only approved source parts are clearly listed, and all documentation must reference the correct NSN 5355-01-528-1409. A primary point of contact is provided for inquiries.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Installation Hardware Supply (Sub-component Manufacturing)The contract pertains to the supply of precision military-grade fasteners, brackets, and mounting hardware specifically designed for the integration of Overhead Gunner Protection Kits onto JLTV platforms. These components are critical for ensuring structural integrity, operational safety, and mission readiness in combat environments, requiring adherence to stringent military specifications and quality control protocols. The work involves sub-component manufacturing under a subcontract arrangement, with all items intended for direct integration into armored vehicle systems used by U.S. military forces. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, and falls under NAICS code 332312, indicating specialization in screw, nut, and bolt manufacturing. Performance is mandated to occur at Lakenheath, suggesting direct operational support to U.S. Air Force or joint forces stationed there. The contracting authority is the Department of Defense, under the office designation FA5587 48 Cons, which handles administrative functions without initiating direct requirements, implying this is an induced subcontract opportunity tied to broader defense procurement efforts. Suppliers must be prepared to meet exacting tolerances, certification standards, and logistics timelines to ensure seamless compatibility and field deployment of protected gunner systems.

FA5587 48 Cons (admin Only No Req)

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract entails the fabrication and on-site erection of a structural steel framework for buildings under a subcontract agreement, with the North American Industry Classification System code 332312 indicating specialized metal fabrication services. Work must be performed to meet exacting standards for strength, precision, and safety, with the scope encompassing all phases from manufacturing components off-site to final assembly and installation at the project location. The responsibility includes coordinating logistics, adhering to engineering specifications, and ensuring timely completion without disrupting adjacent operations. The solicitation was posted on August 3, 2026, and responses are due by August 6, 2026, leaving a narrow three-day window for submission. The contract is managed under the Department of Homeland Security through its Aviation Logistics Center, though no specific place of performance has been identified, suggesting the location may be determined based on project needs or awarded to the most qualified responder. No set-aside provisions or organization type restrictions are indicated, making the opportunity open to all eligible subcontractors with proven capability in structural steel work. Interested parties must act swiftly to meet the deadline and submit compliant proposals through the provided SAM.gov portal.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Supply of Fasteners or Precision Hardware (NIIN 001488492)The contract calls for the supply of high-volume precision hardware identified by NIIN 001488492, with a projected requirement of 1,214 units and a total estimated value of $1,296,382. The solicitation is classified as a subcontract under NAICS code 332312, which pertains to forging and stamping operations, indicating the hardware is likely manufactured through precision metalworking processes. The opportunity was posted on August 3, 2026, with a response deadline set for August 18, 2026, at 7:00 PM, requiring timely submission of proposals from qualified suppliers. Performance of the contract is designated to take place in Richmond, with a zip code of 23297, though no specific office address or point of contact is provided. The contracting organization is the Defense Logistics Agency Aviation, operating under the Department of Defense, which underscores the critical nature of the hardware for aviation systems. No set-aside designation or organization type is specified, suggesting the opportunity is open to any eligible subcontractor meeting technical and delivery requirements. The official solicitation details can be accessed via the provided SAM.gov link for full submission guidance.

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract entails the fabrication and on-site assembly of structural steel components for buildings or bridges under a subcontract arrangement, with performance required in Reno, Nevada, specifically at the 89502 ZIP code area. The work falls under NAICS code 332312, which classifies it as structural metal fabrication, and is managed by the Department of Veterans Affairs through its 261-NETWORK Contract Office 21. The solicitation was posted on August 3, 2026, with a firm deadline for responses on August 10, 2026, at 2:00 PM. While no set-aside designation or agency-specific point of contact is provided, the scope clearly demands precision in manufacturing steel elements to specification and their secure, code-compliant installation at the designated location. All activities must align with federal procurement standards governing subcontract performance for VA infrastructure projects.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Manufacturing of Self-Weathering Steel Utility PolesNashville Electric Service is soliciting bids for the manufacturing of sixty-foot self-weathering steel utility poles具备 H5 mechanical capacity and a CORROCOTE brown finish, ensuring durability and corrosion resistance in outdoor environments. The poles must fully comply with NES LSK-1212 specifications and relevant ASTM standards to meet operational and safety requirements for electrical distribution infrastructure. This subcontract opportunity is open to qualified manufacturers with the capability to produce poles that meet exacting technical and finish criteria, with responses due by August 14, 2026. The place of performance is centered in Nashville, Tennessee, and the solicitation is accessible through the vendor portal at the provided URL. Contractors must demonstrate experience in steel pole fabrication and adherence to industry-certified standards to be considered eligible.

Nashville Electric Service

POSTED

DEADLINE

The contract calls for the procurement of steel poles measuring 100 feet in length with a minimum torsional capacity of 486 ft-kips at ground level, equivalent to Class H4 standards. These poles must be hot dipped galvanized in compliance with ASTM A123 to ensure corrosion resistance and durability. All design details, drilling patterns, and fabrication must strictly follow the latest version of the NES Specification LSK-1230 to guarantee uniformity and structural integrity. Only approved manufacturers and specific part numbers are acceptable, including DIS-TRAN100H4, FTWORTH100H4, MDHENRY100H4, ROHN100H4, SABRECO100H4, THOMAS-B100H4, V&SSCHU100H4, VALMONT100H4, CHMALLSTEELPOLES, and TAPPALLSTEELPOLES. The solicitation, issued under reference number Z4916 by Nashville Electric Service in Tennessee, is targeted toward state and local government entities and remains open for responses until August 14, 2026, with all deliveries and performance expected to occur in Nashville, Tennessee. Jay Thompson serves as the primary point of contact for procurement inquiries and can be reached via email at jethompson@nespower.com.

Nashville Electric Service

POSTED

DEADLINE

Structural Steel FabricationThe contract is for the fabrication of steel beams, columns, and connections in accordance with detailed engineering drawings for use in building or bridge construction projects. It is classified as a subcontract under NAICS code 332312, which specifically pertains to structural steel fabrication. The opportunity was posted on August 3, 2026, with a response deadline of August 5, 2026, limiting the window for submissions to just over two days. Work is to be performed at various locations, with no specific city or state identified beyond the broad reference to Michigan, indicating the scope may extend across multiple sites within the state. The contracting entity is DTMB, which is associated with the Michigan agency, though no further organizational or point of contact details are provided. The contract does not specify a set-aside status or any preferred classification for small or disadvantaged businesses. Interested parties must submit responses through the designated public portal linked in the notice.

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract titled Structural Steel Fabrication and Erection is a subcontract under the SBA set-aside program, specifically targeting small businesses, for the fabrication and on-site assembly of structural steel components used in buildings or bridges. The work is to be performed under the purview of the Department of Energy's Western Rocky Mountain Region, with a solicitation posted on August 3, 2026, and responses due by September 4, 2026. The North American Industry Classification System code 332312 applies, indicating the scope involves structural metal fabrication and related erection services. While the exact location of performance is not specified, the work is expected to occur within the Western Rocky Mountain region under the agency's oversight. The subcontract opportunity is accessible through the FedConnect portal, and bidders must meet SBA eligibility requirements to qualify, as no other set-aside classification is indicated.

Western Rocky Mountain Region

POSTED

DEADLINE

PIN-RIVET Supply and DeliveryThe contract entails the supply of 71 units of PIN-RIVET identified by NSN 5320013987405, with full compliance to federal and military specifications covering all requirements for packaging, labeling, and delivery. The items must be furnished in accordance with applicable defense standards and delivered to the designated destination in New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation is categorized as a subcontract under NAICS code 332312 and is managed by the ASC Commodities Division within the Department of Defense. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026, leaving a brief window for qualified vendors to submit proposals. All deliverables must meet stringent military quality and documentation requirements to ensure readiness and compatibility with defense systems.

ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract pertains to the fabrication and on-site erection of a structural steel framework for a building, with the NAICS code 332312 indicating specialization in structural metal fabrication. The work involves end-to-end execution from manufacturing components to their assembly at the project site, requiring precise engineering and construction capabilities. The solicitation was posted on July 14, 2026, with responses due by July 28, 2026, and it is classified as a subcontract under the jurisdiction of the Mississippi Department of Finance and Administration, operating under the agency name MPTAP. The place of performance and contact details are not specified in the provided data, but the work is expected to occur within the state of Mississippi. Interested parties must submit their proposals by the deadline to be considered for award, with no set-aside provisions indicated for small businesses or other categories.