This Subcontract opportunity from New York was posted on December 18, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Structural Steel Fabrication and Installation

Closed

State & Local

Submission Closed01/07/2026, 07:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

SLED

Galvanized Steel Sign Post Manufacturing and SupplyThis subcontract for Galvanized Steel Sign Post Manufacturing and Supply involves the production and delivery of cold rolled steel sign posts for prime contractors working on Pierce County projects. The manufacturer is responsible for creating posts to TeleSpar or approved equal configurations, ensuring a hot dipped galvanized coating is applied to both the interior and exterior for the entire length of the post. The contract requires strict adherence to quality standards, including the provision of written certification for materials tested under a certified quality assurance program to verify specific yield and tensile strength. Managed by the Washington Planning and Public Works agency, the procurement process includes a response deadline of November 20, 2026.

Planning and Public Works

POSTED

DEADLINE

Solicitation # 2026-ITB-181

Pierce County's Planning and Public Works department is soliciting bids for the procurement of Telespar or approved-equal metal signposts and related hardware to support regional infrastructure. The required materials must be cold rolled carbon sheet steel conforming to ASTM A1011/A1011M Grade 50, with a minimum tensile strength of 65,000 PSI. All posts must feature a hot dipped galvanized coating conforming to ASTM A653/A653M Grade-90, ensuring they are galvanized both inside and out for their entire length. Deliverables include various post configurations and accessories such as cast aluminum sign caps, 90-degree crosspieces, surface mount post bases, and 3/8 inch steel rivets. The contract will be awarded to the responsible bidder who submits the lowest responsive bid. Bidders must provide a written manufacturer certification detailing the product's yield and tensile strength and confirming a certified quality assurance program. Submissions must be made via the OpenGov portal by 1:00 PM on November 20, 2026, and must include a completed invitation to bid and pricing proposal. All pricing must be FOB Destination, Prepaid and Allow. The resulting agreement will be governed by Washington law, with payments processed monthly through the County voucher system based on documented work performed. Contractors are required to provide a Certificate of Insurance naming Pierce County as an additional insured and must comply with non-discrimination, ADA, and prevailing wage requirements.

Planning and Public Works

POSTED

DEADLINE

Supply of Self-Locking Nuts (NAS1758)This HUBZone set-aside subcontract, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of 1,841 double self-locking nuts with extended washers. The required components must strictly adhere to NAS1758 Revision 3 and NSN 5310010430046, specifically part number NAS1758L6. All parts must be manufactured or sourced in compliance with the DLA Master List of Technical and Quality Requirements for critical application items. The contract is designated under NAICS code 332312, with the place of performance located at Tinker AFB. Interested parties must have submitted responses by the deadline of November 13, 2026. This procurement ensures that prime contractors on DLA supply contracts receive specialized hardware meeting rigorous military and technical specifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Loop Clamp SupplyThis subcontract involves the supply of 6,732 critical application loop clamps for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be manufactured or sourced in strict accordance with part standard SAE AS21919E Revision E and Part Piece Number AS21919WDG06. Performance will take place at Tinker AFB, with all deliverables adhering to MIL-STD-2073-1E packaging standards and the DLA Master List of Technical and Quality Requirements. The contract specifically manages TYPE I CODE Y items, which carry a non-extendable shelf life of 180 months. Interested parties must respond by November 16, 2026, regarding this requirement under NAICS code 332312 for the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication and assembly of 28 precision metal tube assemblies for the Department of Defense, specifically supporting DLA Weapons Support projects. The scope of work requires precision cutting, bending, and joining of components to meet BAE Systems specifications for NSN 4710-01-437-2299. All deliverables must adhere to Critical Application Item standards and comply with DFARS 252.204-7012 regulations. The project mandates strict adherence to MIL-STD-2073-1E and MIL-STD-129 for the packaging and marking of all items. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332312. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Copper Alloy Pipe Tee SupplierThis subcontract involves the procurement of one Copper Alloy Pipe Tee to support prime contractors for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing a component that strictly adheres to NSN 4730-01-191-4102 specifications. Additionally, the contractor must ensure full compliance with the Buy American Act and RA001 quality requirements. The scope of work includes specialized packaging and marking in accordance with MIL-STD-129, MIL-STD-2073-1E, and DLA requirement RP001. Once processed, the final product must be delivered to the Trident Refit Facility located in Kings Bay. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Structural Steel Angle Supply (Grade A Rolled Steel)This subcontract involves the manufacture and supply of Grade A rolled structural steel angles for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain. The required materials must feature a height and width of 2.000 inches with a flange thickness of 0.375 inches, identified by NSN 9520012845302. A critical requirement for this contract is the provision of material certifications that include an endorsement from an American Bureau of Shipping surveyor. Performance for this contract is centered in Bremerton, Washington, under NAICS code 332312.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Metal Tube Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 106 specialized metal tube assemblies for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing assemblies to precise technical specifications and part numbers 1MB902, 9081001, and 9081001P. Due to the nature of the components, the contractor must implement rigorous quality control for items designated as Critical Application Items and ensure all procurement packaging requirements are met. The project is categorized under NAICS code 332312 and will be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The final products are intended for prime contractors who are delivering on larger DLA supply contracts.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Fabrication of Angle Brackets (NSN 5340-01-497-0372)This subcontract involves the fabrication of 65 Angle Brackets for the Department of Defense under the DLA Weapons Support Land Supplier Operations Engines. The contractor is required to perform precision cutting and bending of metal in strict accordance with the technical data package for NSN 5340-01-497-0372. It is explicitly stated that additive manufacturing is prohibited for this project, and all work must be performed using appropriate metal fabrication machinery. The project requires full compliance with the Buy American Act as outlined in DFARS 252.225-7001. All 65 finished units must meet DLA quality inspection standards and will be performed in Barstow, California. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Vehicular Body Cover FabricationThis subcontract involves the fabrication and supply of 10 fitted vehicular body covers for prime contractors under DLA supply contracts. The work is managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. Production must strictly adhere to technical drawings and source control specifications, with a specific requirement to use specialty metals in compliance with DFARS 252.225-7008, 7009, and 7010. To ensure quality and security, the contractor must perform First Article Testing to validate all processes and maintain CMMC Level 2 certification. Additionally, all deliverables must comply with MIL-STD-129 and MIL-STD-1916 standards. The place of performance for this project is located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Shoulder Bolts (NSN 5306012833273)This subcontract involves the supply of three specialized shoulder bolts, part number 03A099-16-56 and NSN 5306012833273, for prime contractors working on DLA aerospace hardware projects. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with the place of performance located at Hill AFB. The supplier must ensure strict adherence to several military standards, including MIL-STD-130N and MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and either MIL-STD-1916 or ASQ H1331 for quality assurance. Additionally, the contractor is required to maintain rigorous security and regulatory compliance, specifically CMMC Level 2, NIST SP 800-171, and ITAR/EAR standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Vehicular Seat Bracket FabricationThis subcontract involves the fabrication of three vehicular seat brackets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes the cutting, bending, and welding of metal to meet the precise dimensions and tolerances of NSN 2540-01-658-9205, Part Number 4257970. Performance will take place in New Cumberland, Pennsylvania. To successfully execute the contract, the provider must utilize a CNC press brake, laser or plasma cutter, and welding equipment. All materials used in the fabrication process must be compliant with the Buy American Act. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026, under NAICS code 332312.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days

AI Contract Overview

This subcontract, issued by the NYC Department of Design and Construction, involves the fabrication and installation of structural steel components. The scope of work specifically focuses on the delivery and setup of pipe alignment guides and adjustable steel clamps within New York. The solicitation was posted on December 18, 2025, with a response deadline set for January 8, 2026. Interested parties can find further details and submission guidelines through the New York City Passport portal.