Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Structural Steel Fabrication and Mounting System

Active

Federal

Response Deadline08/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Fabricate a custom internal steel frame and bolt-on mounting system for an F-35A replica capable of enduring extreme Vermont winter conditions, with structural requirements exceeding regional load standards by 115 percent. The design must be certified by a Professional Engineer and finished with a durable powder-coated coating to ensure long-term resistance to corrosion and environmental stress. The project is structured as a Small Business Set Aside subcontract under NAICS code 332312, with performance designated for South Burlington, Vermont, 05403. The opportunity was posted on July 31, 2026, and responses are due by August 15, 2026, at 5:00 PM, issued under the Department of Defense via W7N4 Uspfo Activity Vtang 158.

General Info

Fabricate certified steel frame for F-35A replica, powder-coated, meet extreme winter loads, South Burlington, Vermont, due August 15, 2026.

Agency

Department Of Defense → W7N4 Uspfo Activity Vtang 158View Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

South Burlington, VT, 05403, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 15

Submission deadline

Response Deadline

08/15/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7N4 Uspfo Activity Vtang 158

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7N4 Uspfo Activity Vtang 158

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricate an internal steel frame and bolt-on mounting system for the F-35A replica, designed to withstand Vermont winter conditions at 115% of regional load requirements, with PE-certified structural design and powder-coated finish.

Similar Contracts

Same NAICS industry code

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-580B

The contract specifies the procurement of 82 units of a resilient weapon system mount identified by NSN 5342011596456 under solicitation SPE4A7-26-T-580B, with delivery required FOB origin within 169 days after order placement and an original delivery deadline of April 9, 2027. The item is classified as a critical application item with a Type I shelf life of 60 months that is non-extendable, requiring at least 85% of its shelf life to remain upon receipt by the first government activity per DoD 4140.27 Manual. Packaging must conform to MIL-STD-2073-1E with a unit container coded as BS, intermediate containers in ED format holding 100 units each, cushioning material GH, and preservation method 41 using dry heat without humidity or preservation material. Marking is required per MIL-STD-129 including the special code 32 for shelf-life labeling, physical bare item marking per RQ017, and removal of contractor identification from non-accepted items per RQ011. Inspection and acceptance occur at origin under FAR 52.246-2 using MIL-STD-1916 or a comparable zero-based sampling plan with zero non-conformances required unless otherwise specified, assigning verification levels VII, IV, and II to critical, major, and minor attributes respectively. The contract incorporates a suite of defense acquisition regulations including DFARS clauses on cybersecurity, safeguarding covered defense information, prohibition of hexavalent chromium, restrictions on procurement from communist Chinese military companies, and mandatory use of Wide Area WorkFlow for invoicing and receiving reports. The contractor must comply with DLA’s Master List of Technical and Quality Requirements referenced via R and I numbers, and adhere to supply chain and transportation protocols outlined in DLAD proc notes C19 and C20. Contract type is fixed-price with alternate I applied to the type of contract clause, and the award mechanism is likely lowest price technically acceptable based on automated award procedures. Delivery must be made to the DLA New Cumberland Facility in Pennsylvania with all items labeled with the NSN and barcoded as required. The contract includes clauses mandating whistleblower protections, prohibition of mandatory arbitration, safeguarding of contractor information systems, accelerated payments to small business subcontractors, compliance with NIST SP 800-171,

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Light Bases (Poles/Mounting Bases)The contract calls for the procurement and delivery of between 10 and 20 light bases, identified by part number DB124R12-226-PTF-BLS-ABT, specifically designed for streetlight mounting. All units must fully comply with the technical specifications outlined in the requirement to ensure suitability for public infrastructure use. The deliverables include not only the physical bases but also proper packaging and shipping arrangements to guarantee safe and timely arrival at the designated location. The work is classified as a subcontract under NAICS code 332312, which pertains to architectural and structural metal manufacturing. The solicitation was posted on July 31, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM. The contracting entity is Building Maintenance under the jurisdiction of Connecticut, though specific city or office details are not provided. The place of performance and point of contact information are also unlisted, leaving recipients to refer to the official procurement portal link for further details.

Building Maintenance

POSTED

DEADLINE

Structural Steel FabricationThe contract entails the fabrication of structural steel components including beams, columns, and framing elements in strict accordance with project drawings and applicable building codes. This is a subcontract issued under a Small Business Set Aside designation, specifically for total small business participation, and is classified under NAICS code 332312 for structural metal fabrication. The opportunity was posted on July 31, 2026, with proposals due by August 14, 2026, at 7:00 PM. The contracting agency is the FWS Sat Team 3 under the Department of the Interior, though specific performance location and point of contact details are not provided. All work must meet technical and regulatory standards as outlined in the referenced project specifications, and interested parties must qualify as small businesses to be eligible to respond.

POSTED

DEADLINE

Prefabricated Metal Fencing Supply and ManufacturingThe contract pertains to the manufacture and supply of prefabricated, corrosion-resistant metal fencing components designed to meet stringent military standards for deployment along the flightline at RAF Akrotiri. The fencing must be engineered for durability in harsh environmental conditions, ensuring long-term structural integrity and security compliance in a high-risk operational zone. Materials and fabrication processes are required to withstand salt spray, extreme temperatures, and constant exposure to aviation fuels and exhaust without degradation. Submission of proposals is due by August 14, 2026, under a subcontract arrangement with the Department of Defense, specifically managed by FA5570 501 Csw Rco. The North American Industry Classification System code 332312 indicates the work falls under metal fence and guardrail manufacturing. All components must be ready for immediate installation at the designated location, RAF Akrotiri with postal code BF1 2AT, and must adhere to all applicable defense specifications without deviation. The procurement is focused on quality, consistency, and timely delivery to support critical airfield security operations.

FA5570 501 Csw Rco

POSTED

DEADLINE

Mobile Maintenance Platform Design & FabricationA mobile, modular, height-adjustable platform is being custom designed, engineered, and fabricated specifically for the maintenance of LUH-72A Lakota rotorcraft, with strict compliance to OSHA safety standards and integration into existing hangar operational environments. The platform must provide safe, efficient, and ergonomic access to all critical maintenance points on the aircraft while ensuring adaptability to various maintenance tasks and aircraft configurations. Engineering requirements emphasize durability, stability, ease of mobility, and precise height adjustment capabilities to accommodate different maintenance scenarios without compromising worker safety or equipment integrity. The contract is a small business set-aside under NAICS code 332312, indicating it is reserved exclusively for small business concerns, and falls under the Department of Defense via the W7M0 Uspfo Activity De Arng. The solicitation was posted on July 31, 2026, with responses due by August 25, 2026, and the place of performance is designated with a ZIP code of 19720. All deliverables must be fully compliant with federal safety and operational guidelines, and the supplier is expected to deliver a turnkey solution that includes full documentation, testing procedures, and validation of compliance prior to acceptance.

W7M0 Uspfo Activity De Arng

POSTED

DEADLINE

Reinforcing Steel SupplyThe contract entails the supply of reinforcing steel, commonly known as rebar, to be provided on a per-kilogram basis as outlined in CLIN 3, with all materials required to strictly comply with the project’s technical specifications. The rebar must be delivered in its original, undamaged packaging to ensure quality and integrity upon arrival. The solicitation is classified as a subcontract under NAICS code 332312, which corresponds to prefabricated metal building and component manufacturing, indicating the specialized nature of the procurement. The contract is issued by the Department of State through the American Embassy Bogota - Nas, with a response deadline of September 2, 2026, at 9:00 PM. The posting date is July 31, 2026, and the place of performance is not specified, suggesting delivery may occur at an unspecified location tied to the embassy’s project needs. No set-aside designation or organizational type information is provided, and there is no designated point of contact listed publicly. The opportunity is accessible via the SAM.gov platform for interested suppliers.

American Embassy Bogota - Nas

POSTED

DEADLINE

in about 1 month

Heavy-Duty Vehicle Frame FabricationThe contract calls for the fabrication of a high-strength steel frame with a specified thickness of 0.38 inches and a minimum yield strength of 120,000 psi, requiring precise engineering to meet structural performance standards. The scope includes comprehensive structural calculations to ensure load-bearing integrity and the design of an internal liner system, indicating a need for integrated material and functional compatibility. This is a subcontract under the NAICS code 332312, focused on metal fabrication services for specialized applications. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, and is issued by the National Institutes of Health, NICHD, under the Department of Health and Human Services, suggesting the frame is intended for use in a high-precision or research-related vehicle system. The place of performance and point of contact details are not provided, but the work is expected to be completed by a qualified subcontractor capable of handling advanced materials and engineering documentation.

National Institutes Of Health Nichd

POSTED

DEADLINE

Structural Steel FabricationThe contract pertains to the fabrication of structural steel components including beams, columns, and framing elements intended for use in building or bridge construction projects. It is designated as a subcontract under NAICS code 332312, which specifically covers structural metal fabrication. The opportunity was posted on July 31, 2026, with a response deadline of August 7, 2026, at 6:00 PM, indicating a limited window for potential vendors to submit proposals. The work is to be performed at Scott Air Force Base, placing the performance location under the jurisdiction of the Department of Defense, specifically managed by the W072 Endist Louisville office. There is no set-aside designation specified, meaning the contract is open to all eligible contractors regardless of business size or certification status. No point of contact information is provided within the data, and the place of performance lacks detailed address information beyond the base name. The official listing can be accessed through the provided SAM.gov link for additional submission requirements and technical specifications.

W072 Endist Louisville

POSTED

DEADLINE

Industrial Pallet Rack Supply and InstallationThe contract calls for the supply and installation of nine fixed selective pallet racks, each requiring structural anchoring directly to a concrete slab to ensure stability and load-bearing integrity. All work must adhere strictly to the engineering standards outlined in UFC 3-301-01 and ANSI MH16.1, with PE-sealed calculations provided as proof of structural compliance. The project is designated as a Small Business Set Aside under the SBA program, restricting eligibility to qualified small businesses, and falls under NAICS code 332312 for metal warehousing and storage equipment manufacturing. The place of performance is confirmed as Wilmington with a zip code of 19804, and all deliverables must be completed by the response deadline of August 26, 2026, at 3:00 PM. The contract is classified as a subcontract under the Department of Defense, specifically managed by the W7M0 Uspfo Activity De Arng, with no specified point of contact listed in the provided data.

W7M0 Uspfo Activity De Arng

POSTED

DEADLINE

Supply of Resilient Mounts (NSN: 5342-000648292)The contract awards the manufacture and annual delivery of 162 resilient mounts over a five-year indefinite-delivery/indefinite-quantity period, with all products required to meet federal specifications and be listed on the Qualified Products List to ensure compatibility and reliability for military use. The National Stock Number for the item is 5342-000648292, and the contract is classified as a Small Business Set Aside, meaning only eligible small businesses may compete, with the North American Industry Classification System code 332312 indicating specialization in forging and stamping. The award will be administered by the Defense Logistics Agency Aviation under the Department of Defense, and all deliveries must comply with strict quality and technical standards to support defense logistics requirements. The solicitation was posted on July 31, 2026, with proposals due by August 17, 2026, leaving a limited time window for qualified small businesses to respond and secure the production contract.

POSTED

DEADLINE

MOUNT RESILIENT,WEA

Solicitation # SPE4A726R0736

This contract is an indefinite quantity contract with a five-year base period for the procurement of resilient mounts, designated as MOUNT RESILIENT,WEA, under NSN 5342-000648292. It is a small business set-aside, exclusively available to certified small businesses, and requires suppliers to be actively registered in the System for Award Management with annual updates. The estimated annual demand is 162 units, with delivery orders ranging from a minimum of 57 to a maximum of 162 units per order. FOB terms are destination, and inspection and acceptance occur at origin. The delivery schedule follows the 164 DARO criteria, and the contract is subject to export controls and higher-level restrictions. Material is classified as critical application, and the Qualified Products List applies. Cost and pricing data may be required, and progress payments are not authorized. Supplier performance risk will be monitored under the Supplier Performance Risk System. Evaluation for award will be based on equal weighting of price, past performance, and delivery, with final selections determined by the combination of these and other factors outlined in the solicitation. Offers must be submitted in writing by the closing date of September 18, 2026, following the issue date of August 17, 2026. The solicitation is accessible exclusively through the DLA Internet Bid Board Systems, and no paper copies will be provided; Adobe Acrobat Reader is required to access documents. The contracting office is the Department of Defense, DLA Aviation, based in Richmond, Virginia, with Montana Kipp as the primary point of contact. All responsible sources may submit offers, and the NAICS code is 332312. EEO clearance is not required, and there is no surge requirement.

POSTED

DEADLINE

Miter Gate Strut Arm Assembly Fabrication

Solicitation # W912ES26BA020

The U.S. Army Corps of Engineers - St. Paul District is seeking a qualified small business contractor to fabricate Strut Arm Assemblies for Miter Gates used on Locks along the Upper Mississippi River. Each assembly is 18 feet 4 inches in length and must be constructed from specific grades of steel castings and machined components, adhering to stringent quality standards. The contractor must hold one of three AISC certifications: Intermediate or Advanced Bridge Fabricator with fracture critical endorsement, or Certified Hydraulic Steel Structures Fabricator with fracture critical endorsement, and must also be certified under the AISC Quality Certification Program for applying sophisticated paint systems in Category P1, P2, or P3. Comprehensive quality control and quality assurance procedures are required for casting, machining, and painting operations. All finished assemblies must be delivered to the USACE Service Base in Fountain City, Wisconsin no later than March 30, 2028. This procurement is a total small business set-aside under NAICS code 332312, with a size standard of 500 employees, and bids must be submitted exclusively through the PIEE module. No bid bonds are required, but all offerors must be fully registered in SAM with current FAR and DFARS representations and certifications. Questions must be submitted via the PIEE Q&A tab, and the solicitation number is W912ES26BA020 with a response deadline of September 2, 2026.

W07V Endist St Paul

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W7N4 Uspfo Activity Vtang 158

Same awarding agency

Transportation and Installation LogisticsA small business subcontract is being solicited to transport two large, fragile FRP replicas to VTANG sites in Vermont and perform all on-site assembly, anchoring, and installation using specialized rigging equipment, with full adherence to military base security protocols. The work must be completed at a designated location in South Burlington, Vermont, with compliance to all facility access and safety requirements inherent to Department of Defense operations. The contract is set aside exclusively for small businesses under the SBA program and falls under the NAICS code 484220 for specialized freight trucking. The solicitation was posted on July 31, 2026, with responses due by 5:00 p.m. on August 15, 2026, and the performing agency is the W7N4 Uspfo Activity VTANG 158 under the Department of Defense. All logistics, including secure transport, precision handling, and installation, must be executed with attention to the fragility of the materials and strict security compliance during every phase of the operation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Professional Engineering (PE) Certification ServicesA Professional Engineer (PE) certification is required to verify that the structural design of a replica mounting system complies with or exceeds 115% of the regional environmental load standards applicable in Vermont, ensuring the system’s safety and resilience under extreme local conditions. This effort demands rigorous engineering analysis and documentation to confirm the system’s ability to withstand wind, seismic, snow, and other environmental forces as defined by Vermont’s building and safety codes. The certification must be issued by a licensed PE with authority to practice in the state, and the submission must clearly demonstrate compliance through calculations, drawings, and engineering judgment. This is a Small Business Set Aside subcontract under NAICS code 541330, designated for small businesses with a response deadline of August 15, 2026 at 5:00 PM. The work is to be performed in South Burlington, Vermont, with a postal code of 05403, and is procured by the U.S. Department of Defense through the W7N4 Uspfo Activity Vtang 158 office. While no specific contact information is provided, the opportunity is publicly listed on SAM.gov with a designated portal for submissions and further details. The contract emphasizes accountability, precision, and regulatory adherence, requiring the contractor to possess full technical competence and legal authority to certify structural designs in Vermont.

Engineering Services

POSTED

DEADLINE

Fiberglass Reinforced Plastic (FRP) Replica FabricationThe contract requires the design, mold-making, and fabrication of two high-fidelity fiberglass reinforced plastic (FRP) replicas of the F-35A fighter jet, specifically engineered to withstand outdoor weather conditions. Each replica must be built with durable, high-quality paint and a protective coating to ensure long-term resilience against environmental exposure. A reusable mold must be developed during the fabrication process and subsequently transferred to VTANG upon completion, ensuring the government retains the means to produce additional units if needed. The work is structured as a subcontract under a Small Business Set Aside, indicating eligibility is limited to small businesses as defined by the SBA, with the NAICS code 326199 indicating miscellaneous plastic product manufacturing. The place of performance is specified as South Burlington, Vermont, with a zip code of 05403, and responses must be submitted by August 15, 2026, at 5:00 p.m. The contract was posted on July 31, 2026, and is managed by the Department of Defense under the W7N4 Uspfo Activity VTANG 158.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

F-35A Lightning II Replica Models (Mini-Static Displays)

Solicitation # PANNGB26P39548

The Vermont Air National Guard is seeking qualified small businesses to design, fabricate, deliver, and install two highly durable 1:10 scale or larger replica models of the F-35A Lightning II for permanent outdoor display in South Burlington, Vermont. The solicitation, identified as PANNGB26P39548, is a Small Business Set Aside under NAICS code 339999 and requires proposers to demonstrate capability in FRP molding, steel fabrication, and installation of PE-certified mounting systems designed to withstand long-term outdoor exposure. Interested firms must submit a capability statement not exceeding five pages detailing their company profile including UEI and cage code, technical approach to fabrication and mounting, and at least two examples of similar outdoor aerospace replica or sculpture projects completed within the last five years. All submissions are due by August 15, 2026, and must include any clarifying questions regarding the technical specifications or installation environment. The project is managed by the Department of Defense through the VTANG office, with Kristen Lucey and James Yoshikawa serving as the primary and secondary points of contact for inquiries.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Ninja GEN2 System Technical Support and MaintenanceThe contract encompasses comprehensive technical support, diagnostics, troubleshooting, and preventive maintenance services for the Ninja GEN2 counter-Unmanned Aircraft System, ensuring continuous operational readiness through both remote and on-site assistance. The services must maintain system functionality and performance, addressing any technical issues that may arise during deployment or training scenarios, and include proactive measures to minimize downtime and enhance system reliability. All work must be performed in accordance with established technical specifications and operational requirements to support mission-critical C-cUAS objectives. This is a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, with the NAICS code 541330 classifying it under Other Professional, Scientific, and Technical Services. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by the Department of Defense through the W7N4 Uspfo Activity Vtang 158 office. Performance is required to occur at a location with a zip code of 05403, and while no specific point of contact or detailed address is provided, respondents must ensure compliance with all federal procurement guidelines and be prepared to deliver services to meet urgent defense operational demands.

Engineering Services

POSTED

DEADLINE

Black River Systems Ninja Support and Warranty Extension

Solicitation # W50S9C-26-Q-A016

The 158th Fighter Wing in South Burlington, Vermont, intends to award a single-source firm-fixed-price contract to Black River Systems Company, Inc. for annual technical support and hardware warranty extension of the proprietary Ninja GEN2 counter-unmanned aircraft system, with a total contract value of $84,000. This action is justified under FAR 8.405-6(a)(1)(i)(B) due to the unique and specialized nature of the system, which only Black River Systems can support because of its proprietary design and lack of alternative vendors, as confirmed by market research across SAM.gov, GSA Advantage, and USASpending.gov. The procurement is designated as a total Small Business Set-Aside under NAICS code 334290, and the contract will be administered by the USPFO-VT with James Yoshikawa as the Contracting Officer and Patrick Bushey as the Technical Representative. Performance will occur at the 158th Fighter Wing location, with services rendered as needed over a one-year period to ensure continuous operational readiness, and no competitive bidding is planned unless responses received during the public notice window prompt a change in the government’s discretion. The contract includes no line-item breakdowns, options beyond the base warranty and support period, or explicit packaging, marking, or inspection standards beyond the sole-source justification. Acceptance of services will be determined by the Government based on adherence to the unique technical requirements of the Ninja GEN2 system, with the contractor responsible for ensuring system functionality without defined shipping, delivery, or FOB terms since the deliverable is service-based. All submissions in response to this notice must be received by August 14, 2026, to the Contracting Office in South Burlington, Vermont, and may be submitted via written documentation with digital signatures in PDF format, though all public-facing versions of the final contract must be redacted per FAR 5.401, 24.1, and 24.2 to remove dollar amounts, names, signatures, and proprietary data. The Government has not required security clearances for personnel, but the associated documentation is marked CUI//ISP-SSEL and must be handled according to Controlled Unclassified Information guidelines.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Performance Data Analytics and ReportingThe contract requires the collection, analysis, and reporting of pilot fitness performance data to evaluate baseline assessments, track injury trends, and measure the effectiveness of fitness programs. Deliverables include interactive dashboards and detailed written reports tailored for the Contracting Officer’s Representative, ensuring actionable insights are communicated clearly and consistently. The work must be performed in compliance with federal standards, with all data processed to support improved readiness and health outcomes for military pilots. This is a small business set-aside subcontract under NAICS code 541611, solicited by the Department of Defense through the W7N4 Uspfo Activity Vtang 158 office. Proposals are due by August 7, 2026, and performance is expected to take place in Vermont with a zip code of 05403. The contract emphasizes analytics expertise with an emphasis on data visualization and reporting, demanding a contractor capable of translating complex fitness metrics into strategic intelligence for defense personnel health management.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Fitness Equipment Supply, Maintenance, and CalibrationThe contract involves the supply, installation, maintenance, and calibration of commercial-grade fitness and resistance training equipment for use in an athletic training program, with mandatory safety inspections and repair services included to ensure ongoing operational integrity. All equipment must meet commercial-grade standards and be supported by comprehensive service protocols that guarantee reliability and safety for daily use by trained personnel. The work is subject to strict calibration and maintenance schedules to comply with performance benchmarks and user safety requirements. This is a total small business set-aside subcontract under NAICS code 811310, managed by the Department of Defense through the W7N4 Uspfo Activity Vtang 158 office, with performance required at a location in zip code 05403. The opportunity was posted on July 21, 2026, and responses are due by August 7, 2026, at 5:00 PM. Only small businesses are eligible to bid, and the contract is issued under a federal set-aside program designed to promote opportunities for small businesses within defense-related contracting.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Health and Wellness Education Program DeliveryThe contract calls for the development and delivery of annual education programs focused on nutrition, sleep hygiene, stress management, and injury prevention tailored specifically for pilots and support staff within the Department of Defense. Deliverables include comprehensive digital educational materials and ongoing trend analysis to assess program effectiveness and adapt content based on emerging health data and workforce needs. The initiative is structured as a small business set-aside under SBA guidelines, with the North American Industry Classification System code 611691, indicating an emphasis on other schools and instruction services. The place of performance is designated as 05403, suggesting operations are centered in or near Vermont. Proposals must be submitted by August 7, 2026, and the opportunity was posted on July 21, 2026, with no solicitation number provided but accessible through the official SAM.gov workspace link.

Exam Preparation and Tutoring

POSTED

DEADLINE

On-Site Athletic Training and Injury Prevention ServicesThe contract seeks a small business to provide on-site athletic training and injury prevention services specifically tailored for fighter pilots at the VT Air National Guard Base, located in Vermont with ZIP code 05403. Services include daily strength and conditioning programs, functional movement screening, musculoskeletal assessments, and targeted injury prevention strategies to ensure optimal physical readiness and operational sustainability of aircrew members. The work is classified under NAICS code 621340, reflecting professional services in health and wellness support aligned with military performance standards. This is a total small business set-aside under SBA guidelines, meaning only eligible small businesses may submit proposals, and the solicitation is open for responses until August 7, 2026, at 5:00 PM. The contract is structured as a subcontract under the Department of Defense, with the performing activity identified as W7N4 Uspfo Activity VTANG 158. Although no point of contact information is provided in the data, interested parties must submit proposals through the designated SAM.gov portal before the deadline to be considered. Performance location is strictly limited to the VT Air National Guard Base, requiring the contractor to maintain a consistent on-site presence to support the unique demands of pilot physical readiness.

Offices of Physical, Occupational and Speech Therapists, and Audiologists

POSTED

DEADLINE

OHWS Athletic Training

Solicitation # W50S9C26QA009

The contract pertains to the provision of athletic training and pre-habilitation fitness services for fighter pilots at the VT Air National Guard Base in South Burlington, Vermont, under a Firm Fixed Price arrangement. The mission is to mitigate musculoskeletal injuries caused by high G-force exposure and helmet weight through structured strength training, injury prevention programs, and education on nutrition, sleep hygiene, stress management, and equipment safety. Services must be delivered Monday through Saturday between 0600 and 1700, excluding U.S. holidays, with all personnel, equipment, and supervision the responsibility of the contractor, except for government-furnished items. Performance must comply with Air Force Instruction AFI48-149 and require certified personnel holding a CSCS credential. The contract period runs from September 23, 2026, to September 22, 2027, with baseline and final performance reports due within 30 days of award and 15 days after the 10th month, respectively. All deliverables are subject to the Quality Control Plan and Quality Assurance Surveillance Plan, with formal acceptance conducted by the Government’s Contracting Officer’s Representative using DD Form 250 and established AQL standards. The solicitation is a total small business set-aside under NAICS code 621340 and is subject to comprehensive Federal Acquisition Regulation requirements, including whistleblower protections, cybersecurity compliance, supply chain security, and prohibitions on covered telecommunications and video surveillance equipment. Contractors must submit proposals in four electronic volumes with strict formatting guidelines: Volume 1 includes non-evaluated items; Volume 2 (Technical Capability) is capped at 15 pages and evaluated using color-coded adjectival ratings tied to risk; Volume 3 (Past Performance) allows up to 10 pages with two reference contracts; Volume 4 (Price Quote) must be submitted in Excel with formulas visible and no images. Proposals must be emailed by August 7, 2026, at 1700 EST to designated point of contacts, with no portal submission permitted. Offerors must certify their small business status, Unique Entity ID, and CAGE code, and disclose any organizational conflicts of interest upfront. Evaluation follows a best-value trade-off approach where technical capability and past performance are weighed equally against price, with award decisions not bound by the lowest price. Contractors must ensure all personnel obtain Common Access Cards for facility and network access and meet DoD 8570.0

Offices of Physical, Occupational and Speech Therapists, and Audiologists

POSTED

DEADLINE