This Solicitation opportunity from Department Of Defense was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STUD ASSEMBLY, TURNL

Closed

SPE4A6-26-T-48G0Federal

Submission Closed05/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

PIN, QUICK RELEASEThe contract involves the procurement of five units of a quick release pin identified by the National Stock Number 5315-00-883-2968. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract type is a solicitation, and there is no specified set-aside or NAICS code associated with it. The contract details indicate a federal organization as the issuer, but specific location information for both the office address and place of performance is not provided. While there is no contact information listed, further details and access to the solicitation can be obtained through the Defense Logistics Agency’s bidding platform. This contract seeks to fulfill a straightforward acquisition for the Department of Defense’s supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

NUTThe contract pertains to the procurement of 14 units of a item identified as "NUT" with NSN/Part Number 5310-01-248-1076. The solicitation, numbered SPE4A6-26-T-92S3, was posted by the Defense Logistics Agency under the Department of Defense on June 15, 2026. Interested parties were required to respond by June 23, 2026. This procurement is categorized as a solicitation and does not specify any set-aside type or NAICS code. The contract is managed by a federal organization, with performance details and specific office location information not disclosed. The solicitation can be accessed through the Defense Logistics Agency's bid board system.

Defense Logistics Agency

POSTED

DEADLINE

CHAIN, WELDLESSThe contract involves the procurement of 370 units of weldless chains identified by NSN/Part Number 4010-00-042-7913. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE4A5-26-T-239P. The solicitation was posted on June 15, 2026, and the deadline for response is June 23, 2026. The contract does not specify any set-aside type or particular small business category restrictions and lacks details on the NAICS code. The place of performance and specific office address details were not provided. Interested parties can access additional information and submit their responses through the Defense Logistics Agency’s bidding system website.

Defense Logistics Agency

POSTED

DEADLINE

LEAF, BUTT HINGEThe contract pertains to the procurement of a leaf butt hinge with the National Stock Number 5340-00-192-4090. A total quantity of five units has been requested under purchase request number 7016088362. This solicitation, identified by the number SPE7L1-26-T-706R, was issued by the Defense Logistics Agency, which operates under the Department of Defense. The solicitation was posted on June 15, 2026, and the deadline for responses is June 26, 2026. The contract is categorized as a federal solicitation with no specific set-aside type indicated. The place of performance and detailed office address information are not provided. The solicitation is accessible through the Defense Logistics Agency's procurement platform, ensuring that vendors can review and submit their responses within the specified timeframe. This contract reflects routine acquisition activity to support DoD operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

CLAMP, LOOPThe contract pertains to the procurement of 20 units of a product identified as "CLAMP, LOOP" with the National Stock Number 5340-01-721-0178. The solicitation, numbered SPE7L1-26-T-707D, was posted on June 15, 2026, with a response deadline set for June 26, 2026. This solicitation was issued by the Defense Logistics Agency, a component of the Department of Defense, and is classified as a federal acquisition. While specific details such as set-aside status, NAICS code, and exact performance location are not provided, the contract is intended to support federal government operations. The official solicitation and submission processes are managed through the specified online procurement portal. This contract facilitates the timely acquisition of essential hardware components within established federal procurement guidelines.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract is for the procurement of 65 units of a Stud Assembly with a Turnlock fastener, designated by part number HS4431-4 and NSN 5325-01-179-7415. The solicitation number for this effort is SPE4A6-26-T-48G0, issued by the Defense Logistics Agency (DLA) under the Department of Defense's ASC Commodities Division. The contract specifies an 80-day delivery timeline with a required ship date of August 4, 2026, and a final delivery date of December 10, 2026. The goods must be delivered FOB (Free on Board) origin with inspection and acceptance occurring at the origin site, which in this case is DLA Distribution Cherry Point in North Carolina. The packaging, marking, and preservation of the parts must comply with various military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and tailored DLA packaging requirements (RP001). Quality and technical control is emphasized through incorporation of numerous technical and quality requirements referenced from the DLA Master List, including specific provisions for configuration management, sampling inspection methods conforming to MIL-STD-1916 or equivalent, and requirements for documentation for source approval. The part is identified as a critical application item, underscoring the importance of compliance with these quality standards. Authorized manufacturers and suppliers, such as The Boeing Company and Howmet Global Fastening Systems, are noted, and the contract includes conditions for handling government property identification and acceptance criteria to ensure full compliance. Contact for the contract is Priscilla Holmes at the DLA for coordination and inquiries.

General Info

Procurement of 65 Stud Assemblies, HS4431-4, 80-day delivery, military quality standards, DLA contract.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-48G0.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 7

Solicitation

Response DeadlineMay 15

Deadline has passed

Submission Closed

05/15/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Priscilla Holmes

contact@example.gov

+1 (555) 000-0000

Full Description

STUD ASSEMBLY,TURNL
STUD ASSEMBLY, TURNLOCK FASTENER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NOTES
BOEING CO (8V613) P/N HS4431-4
CRITICAL APPLICATION ITEM
SPE4A6-26-T-48G0
SECTION B
MONADNOCK COMPANY, THE 60119 P/N 1126000-4
HOWMET GLOBAL FASTENING SYSTEMS INC 71286 P/N 2600-4
THE BOEING COMPANY 8V613 P/N HS4431-4
IAW REFERENCE DRAWING NR 02731 HS4431
REVISION NR P DTD 01/08/2006
PART PIECE NUMBER: HS4431-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016634886 0001 EA 65.000
NSN/MATERIAL:5325011797415
DELIVERY (IN DAYS):0080
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:010 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
SPE4A6-26-T-48G0
SECTION B
PR: 7016634886 PRLI: 0001 CONT’D
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:08/04/2026 Original Required Delivery Date:12/10/2026
SPE4A6-26-T-48G0 NSN/Part Number: 5325-01-179-7415 Quantity: 65 EA Purchase Request: 7016634886QTY: 65 Delivery: 80 days ADO