Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STUD ASSEMBLY, TURNLOCK

Active
SPE4A1-26-T-2510Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 34 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number FX10-1540-4TS and NSN 5325-00-907-1085, supplied by ALCOA GLOBAL FASTENERS INC based in Simi Valley, CA. All items must comply with MIL-STD-130N for identification marking of U.S. military property as specified, and the procurement is governed by DLA Packaging Requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The delivery is required within 118 days after award, and the place of performance is designated as Tracy, CA with a zip code of 95304-5000. The solicitation number is SPE4A1-26-T-2510, issued under NAICS code 332510, and was posted on August 3, 2026, with responses due by August 11, 2026. Primary point of contact is Jade Stringfield of the Department of Defense’s Aviation Supply Chain, reachable via email and phone listed in the contract data. Government identification must be removed from any non-accepted supplies in accordance with RQ011 requirements.

General Info

34 STUD ASSEMBLY TURNLOCK FASTENERS to Tracy, CA by ALCOA, compliant with MIL-STD-130N, delivery in 118 days.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2510.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jade Stringfield
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD ASSEMBLY,TURNLOCK FASTENER
STUD ASSEMBLY,TURNLOCK FASTENER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALCOA GLOBAL FASTENERS INC (29372)
SIMI VALLEY, CA
P/N FX10-1540-4TS
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5325-00-907-1085 Quantity: 34 EA Purchase Request: 7017696493QTY: 34 Delivery: 118 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A5-26-T-319S
The contract is for the supply of two machine thread plugs with NSN 5365-01-266-6399 under solicitation SPE4A5-26-T-319S, with a required delivery within 20 days of award. The item is procured by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, and the contract adheres to DLA packaging and technical requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The supplier must ensure no intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lights, sensors, weapon systems, and regulated chemical reagents, and any portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. An alternate offeror must submit a complete data package for both the approved and alternate part since no data is currently available, and the solicitation closes on August 11, 2026, with contact information provided through Andrew Kish at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-11KR
The contract pertains to the procurement of 19 screw thread inserts with NSN 5325-01-125-3163, issued under solicitation SPE4A6-26-T-11KR by the ASC Commodities Division of the Department of Defense. The delivery is scheduled for 567 days after award, and the solicitation was posted on August 3, 2026, with responses due by August 11, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—including foreign nationals within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information. Access to the export-controlled technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. Distribution is tightly controlled to ensure compliance with U.S. national security policies, and all recipients must be formally authorized by the DLA controlling authority. The place of performance is identified as New Cumberland, Pennsylvania, with Duane Watkins Jr. designated as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE7L1-26-T-907V
The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAPPING
Solicitation # SPE7L1-26-T-908A
The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE4A6-26-Q-1254
The contract pertains to the procurement of 49 units of COVER, ACCESS with NSN 5340-00-870-1655 under solicitation SPE4A6-26-Q-1254, with a delivery deadline of 358 days after date of order. All items must be produced and delivered from origin with inspection and acceptance occurring at origin, and are subject to strict packaging requirements outlined in DLA’s RP001 and MIL-STD-129, including commercial packaging per ASTM D3951 unless hazardous material is involved, in which case FED-STD-313 and TQ requirement IP025 apply. Item unique identification is waived per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs marking and labeling. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier must comply with a suite of technical and quality requirements including RQ001 for tailored higher-level quality standards, RQ042 for ISO 9001:2015, RT001 for measurement and test equipment calibration, and RD004 for CMMC Level 2 self-assessment certification. Configuration changes require formal engineering change proposal requests under RQ002, and government identification must be removed from non-accepted supplies as per RQ011. All requirements referenced by R or I numbers derive from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Deliveries must be palletized per RP001 and shipped to the designated DLA Distribution Depot in Tinker AFB, Oklahoma, with transportation governed by DLAD Proc Note C19 and C20. The contract enforces a strict 0% quantity variance and is classified as a Critical Application Item for The Boeing Company.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9155
This contract specifies the procurement of STRAP, WEBBING under solicitation SPE7LX-26-U-9155, with a total quantity of 5,051 units at a unit price of $5,051.00, delivered FOB origin within 67 days. The item is identified by NSN 5340-01-659-7728 and part number HS404H, and must conform to source-controlled drawings and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packing and labeling must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous material handled per FED-STD-313 and TQ requirement IP025, otherwise commercially packaged per ASTM D3951. The contract prohibits use of Class I ozone-depleting chemicals and requires approval for any substitute chemicals. Configuration changes must follow an Engineering Change Proposal process, and deviations require formal variance requests. Certificate of Conformance procedures are authorized unless suspended by a Quality Assurance Letter of Instruction. Only approved sources listed on the source-controlled drawing may supply the item, though additional qualified sources may be recognized without drawing revision. The procurement is a total small business set-aside under NAICS 332510, with inspection and acceptance conducted at destination and no variance allowed in quantity. All packaging must be palletized in accordance with DLA requirements, and the unit of issue is EA per contract specifications.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
SHEET, METAL
Solicitation # SPE7M0-26-T-026L
The contract pertains to the procurement of 20 units of sheet metal identified by NSN 9535-01-348-3224 under solicitation SPE7M0-26-T-026L, with a delivery requirement of five days after order date. All items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA specifications, and all government identification must be removed from non-accepted supplies. The material must be free of asbestos, and any substitutes require formal approval under clause L30 and provision 4 conditions. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Identification markings must conform to MIL-STD-130N dated November 16, 2012. The contract is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office with performance occurring at Pearl Harbor, Hawaii. The primary point of contact is Grace Beck, reachable via email and phone provided. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under a federal acquisition framework governed by NAICS code 332510.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11LC
The contract specifies the procurement of 60 retaining rings with NSN 5325-01-602-6198 under solicitation SPE4A6-26-T-11LC, requiring delivery within 227 days to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must use preservation method 10, dry, with no cushioning or dunnage, in bulk outer packaging, and palletization must adhere to DLA’s specified guidelines. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, packing, and marking materials, except for limited functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment barrier. The unit price is $60.00 per EA, totaling $3,600, with zero variance allowed in quantity. Inspection and acceptance occur at destination, and delivery is FOB origin. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract is issued under DoD unit of issue, with freight and shipping addresses confirmed for the New Cumberland facility, and transportation governed by DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BAR, LATCH
Solicitation # SPE7LX-26-U-9147
This contract is for the procurement of 570 units of a BAR, LATCH with NSN 5340-01-675-0753, issued under solicitation SPE7LX-26-U-9147 as a Total Small Business Set-Aside under NAICS code 332510. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and delivery is required within 61 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Configuration changes require formal engineering change proposals and variance requests. The item involves controlled technical data subject to ITAR or EAR export regulations, meaning unauthorized disclosure—even to foreign nationals within the U.S.—is prohibited. Only contractors with JCP certification, completed DOD export control training, and formal DLA approval may access this data. The contracting office is the Strategic Acq Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLUG, LEFT
Solicitation # SPE4A7-26-T-607A
The contract specifies the procurement of a PLUG, LEFT with part number 3A020-0215 and NSN 5365-99-723-4334, for a quantity of seven units, to be delivered FOB origin within 144 days of award. The supplier, IPECO HOLDINGS LTD DBA IPECO, is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede general standards such as ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be assigned verification levels or AQLs as defined. The item is subject to destination inspection and acceptance, with no variance permitted in quantity. The delivery address is Arizona Industries for the Blind in Phoenix, AZ, and the required ship date is January 3, 2027. Technical data is not available from DLA, and the contractor must ensure compliance with all referenced quality and documentation standards including those for Source Approval Requests. The contract was issued under solicitation SPE4A7-26-T-607A with a response deadline of August 11, 2026, and is classified under NAICS code 332510 by the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, EXTERNALLY THREAD
Solicitation # SPE4A5-26-T-319R
The contract specifies the procurement of two externally threaded rings with NSN 5365-01-005-1901 and part number 41002372 from WOODWARD HRT INC, to be delivered within 20 days to the Taiwan Army’s Zuo-Ying Ammunition Sub facility in Kaohsiung City. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards, while marking adheres strictly to MIL-STD-129 with no special markings required. Palletization follows DLA packaging requirements, and unit of issue is each. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List referenced in RQ017 and RA001, with revision control dependent on solicitation or award date. The contract is issued under SPE4A5-26-T-319R, with a response deadline of August 11, 2026, and is classified under NAICS code 332510. Funds are allocated for delivery by August 4, 2026, and government-use data includes procurement codes and logistics designators.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE7L1-26-T-907P
This contract pertains to the procurement of 18 units of a tie-down cargo system for vehicles, identified by NSN 5340-01-730-7892 and part number R2616SH-B from RATCHET DEPOT INC. The delivery is required within 176 days from the contract date, with shipment originating FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination facility. All items must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 for DLA packaging guidelines. The use of Class I ozone-depleting chemicals is categorically prohibited, and any substitutes must be pre-approved unless explicitly permitted by the specification. Items must be marked in accordance with MIL-STD-130N for identification of U.S. military property. Hazardous materials, if applicable, must be packaged per TQ requirement IP025 as defined in FED-STD-313, otherwise commercial packaging per ASTM D3951 is acceptable, provided DLA Master List requirements override it. Palletization must meet DLA’s packaging standards. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and the unit of issue is each, with no allowance for partial shipments. The contract was solicited under SPE7L1-26-T-907P with a response deadline of August 14, 2026, and the required ship date is February 7, 2027. The responsible point of contact is Rodney McNinch of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 332112
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A1-26-T-2507
This contract specifies the procurement of a close-tolerance bolt identified by NSN 5306-01-508-6784 and part number NAS6604-128, with a requirement for 30 units to be delivered within 169 days under FOB origin terms and zero quantity variance. The item is classified as a commercial item and must comply with the current revision of the applicable non-government standard NAS6603 through NAS6620, Revision 11 dated December 31, 2025, as well as other referenced technical documents including MIL-STD-130N for identification marking and SYSTEM 22 of FED-STD-H28/20 for dimensional inspection of Class 3A and 3B threads, excluding small threads and self-locking nuts. All manufacturing and quality controls are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for tailored quality requirements, physical identification, and removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs corresponding to critical, major, and minor classifications. Packaging must adhere to ASTM D3951 and MIL-STD-129 with palletization per DLA’s RP001, and all documentation including the Certificate of Quality Compliance must be provided as specified in the Technical Data Package. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for late delivery, and inspection and acceptance occur at the destination. The contract references multiple revisions of quality assurance provisions and CDRLs, with mandatory compliance to DLA requirements overriding all other standards unless explicitly superseded by contract amendments.
Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A1-26-T-2508
The contract is for the procurement of 4 nonmetallic grommets with NSN 5325-01-610-9083 and part number MR200-1271 from Modus Advanced Inc., under solicitation SPE4A1-26-T-2508. Delivery is required FOB origin with zero variance in quantity and must be completed within 166 days, with an original required delivery date of January 25, 2027. Inspection and acceptance both occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129, and palletization must meet DLA packaging requirements. The grommets are to be shipped without special marking and in bulk packaging. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Documentation for source approval and removal of government identification from non-accepted items is mandated. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. All transportation and shipping details follow DLA procedures, and the contract references applicable quality assurance provisions and standardized procedures for compliance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, SPRING
Solicitation # SPE4A1-26-T-2511
The contract pertains to the procurement of four retainer springs with NSN 1650-01-046-2272 under solicitation SPE4A1-26-T-2511, with a delivery requirement of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling is to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. No data is currently available, and the alternate offeror must submit a complete data package including details for both the approved and alternate part. The solicitation is issued by the Department of Defense’s Aviation Supply Chain, with Allison Hugel as the primary point of contact, and responses are due by August 11, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, OUTP
Solicitation # SPE4A1-26-Q-0099
The contract specifies the procurement of 662 units of a Shaft Assembly, Output, identified by NSN 2925-01-179-2648 and manufacturer part number 3501614-3 from Honeywell International Inc. The item is classified as a Commercial Item and a Critical Safety Item (CSI) with a critical application, requiring strict adherence to specified dimensional tolerances on the output shaft’s forward end design and torsion rod diameter. Quality assurance is governed by SAE AS9100 for both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin in accordance with MIL-STD-1916 or ASQ H1331, using zero-defect acceptance criteria unless otherwise stated. All items must be marked per MIL-STD-129 with lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements. The contract mandates compliance with DLA’s master list of technical and quality requirements, Cybersecurity Maturity Model Certification Level 2 self-assessment, and documentation for source approval, while explicitly stating that Item Unique Identification is not required per DFARS 252.211-7003. The procurement is under a Firm Fixed Price contract with no variance allowed in quantity, and delivery is due 247 days after the date of award. The delivery point is Origin, and the shipping destination is DLA Distribution Cherry Point, North Carolina. The item has no shelf life requirement and is subject to all applicable defense information and cybersecurity controls. The solicitation number is SPE4A1-26-Q-0099, posted on August 3, 2026, with responses due by August 10, 2026, issued by the Department of Defense’s Aviation Supply Chain under a federal acquisition framework. All waivers or deviations must be approved by the DSC Contracting Officer, and measuring and test equipment must meet specified standards. The unit of issue is each (EA), with pricing details to be filled in at award.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THR
Solicitation # SPE4A1-26-T-2509
The contract specifies the procurement of a stud with continuous thread, identified by NSN 5307-01-533-6085 and part numbers 95412A597 and STC5618X4, for delivery to a U.S. military installation in Camp Humphreys, South Korea. A single unit of issue (FV) is required with strict zero variance allowance, and delivery must be completed within ten days of award under FOB origin terms. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, MIL-STD-129, and DLA’s stricter Packaging Requirements for Procurement (RP001), including palletization and labeling as specified. The unit of issue is standardized under DoD guidelines, and all items must be marked per DLA’s Physical Identification and Bare Item Marking requirements (RQ017) with government identification retained unless rejected. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Configuration changes require formal engineering change proposals, and any deviations must be formally requested. The contract references the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, and compliance with these requirements is mandatory. The solicitation number is SPE4A1-26-T-2509, with a response deadline of August 11, 2026, and delivery is required no later than July 28, 2026, under a government-funded project.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A1-26-T-2506
The contract pertains to Production Lot Testing for four units identified by NSN 0001S00000062, under Purchase Request 7017695781, with a delivery requirement of 282 days after award. The solicitation number is SPE4A1-26-T-2506, issued by the Department of Defense's Aviation Supply Chain through the Defense Logistics Agency, with performance located at Cherry Point, North Carolina, 28533-5040. Contractors must prepare a Production Lot Test Report clearly labeled with the contract and lot/item numbers, and present it to the Quality Assurance Representative for review. All shipments of test reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documents, a copy of the contract or order, all actual test results and tolerances from the technical data package, material and process certifications, process operation and inspection method sheets, and the drawings used to manufacture the test sample, properly marked if public disclosure or government use beyond the specified purpose is to be restricted. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and is classified under NAICS code 332722, with Jade Stringfield as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: NA
New
DIBBS
Subcontract Opportunity Decomposition UnavailableA subcontract opportunity has been posted under the Aviation Supply Chain division of the Department of Defense with a posting date of August 2, 2026, and a response deadline of August 10, 2026. The solicitation number is unavailable, and the North American Industry Classification System code is listed as NA, indicating incomplete or unassigned industry classification. No set-aside type or description is provided, and details regarding the organization type and point of contact are missing. The place of performance is listed as FPO with a ZIP code of 96672, suggesting a military post office location. The prime contract details could not be retrieved due to a configuration error, which has prevented the decomposition of the opportunity into any sub-opportunities. The procurement is accessible through a public link on the DIBBS system, but no further procedural or technical specifications are available within the provided data.

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 531070
New
DIBBS
Packaging, Labeling, and Shipping LogisticsThe contract requires the proper packaging, labeling, and shipment of precision bolts to the DLA Distribution Depot in New Cumberland, Pennsylvania, with strict adherence to MIL-STD-129 standards for labeling and logistical documentation. All materials must be conditioned and secured to ensure integrity during transport and meet military-grade specifications for handling and storage. The contractor must also implement WAWF-compatible invoicing procedures to ensure seamless financial processing and compliance with Department of Defense financial systems. The work falls under NAICS code 531070, indicating it is a subcontract tied to transportation and warehousing logistics for defense supply chains, and the response deadline is August 10, 2026, with the solicitation posted on August 2, 2026. Performance is specifically assigned to the New Cumberland location, with a ZIP code of 17070-5002, and the contracting organization is part of the Aviation Supply Chain under the Department of Defense.

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance and Labeling ServicesThe contract calls for the development and submission of hazard warning labels and Safety Data Sheets (SDS) for non-exempt materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. This work is critical for maintaining regulatory adherence in the handling, transportation, and use of hazardous materials within the Department of Defense supply chain. The deliverables must meet all technical and formatting requirements prescribed by federal safety standards to accurately communicate chemical hazards and protective measures to personnel and emergency responders. This is a subcontract under the NAICS code 541690, issued by the Aviation Supply Chain division of the Department of Defense, with a performance location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and proposals are due by August 10, 2026. The contract focuses on specialized technical services related to hazardous material compliance, requiring expertise in chemical classification, regulatory interpretation, and label design. All submitted materials must be accurate, complete, and aligned with current federal regulations to support safety and operational continuity across defense logistics operations.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Machine Bolt Manufacturing and SupplyThe contract pertains to the manufacture, packaging, labeling, and delivery of ten precision machine bolts identified by NSN/Part Number 5306-01-417-5781, with strict adherence to MIL-SPEC standards and regulatory compliance including the Berry Amendment and ITAR/EAR requirements. All work must be performed in full alignment with U.S. defense procurement mandates, ensuring that materials and production processes originate domestically and meet stringent export control protocols. The components are critical to military aviation systems and must be produced under controlled conditions to guarantee dimensional accuracy, material integrity, and traceability from raw material to final delivery. The contract is classified as a subcontract under the NAICS code 332112 and is issued by the Department of Defense through the Aviation Supply Chain office, with performance required at a designated facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. While no set-aside designation is specified, all bidders must demonstrate capability in meeting federal defense manufacturing standards and provide evidence of compliance with export control laws and domestic sourcing mandates. Delivery timelines, packaging specifications, and labeling protocols will be closely scrutinized to ensure seamless integration into military logistics systems.
Nonferrous Forging

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract solicitation SPE4A1-26-T-2504 is for the procurement of 25 units of a BOLT, HOOK with NSN 5306-01-503-9383, at a unit price of $25.00, for a total contract value of $625.00. Delivery is required within 20 days after order placement, with a specified original delivery date of July 27, 2026, and the item must be delivered FOB destination to USS MAKIN ISLAND LHD 8 at FPO AP 96672. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under applicable sampling standards, primarily MIL-STD-1916 or ASQ H1331, requiring acceptance of the entire sample lot with no defects unless otherwise directed. All packaging must adhere to ASTM D3951 and be palletized per DLA’s RP001, while labeling and marking must strictly follow MIL-STD-129, including 2D Data Matrix barcodes, with Government identification removed from non-accepted items per RQ011 and bare item marking required per RQ017. The DLA Master List of Technical and Quality Requirements supersedes all other specifications, including ASTM D3951, and mandates compliance with critical, major, and minor attribute classification levels. The item must be shipped using traceable freight methods, not parcel post, and transportation details must comply with DLAD PROC NOTES C19 and C20. The supplier, MCMASTER-CARR SUPPLY COMPANY, is identified by part number 98760A109, and the contract requires full compliance with applicable FAR and DFARS clauses including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium under 252.223-7008, restrictions on covered telecommunications equipment under 252.204-7018, and compliance with hazardous material labeling per 29 CFR 1910.1200 and DFARS clauses. Offerors must possess a valid Unique Entity ID and CAGE code, self-certify their small business status if applicable, and disclose any joint ventures. Invoicing must be submitted through WAWF, and the contract includes clauses addressing
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2505
The contract pertains to the procurement of 10 machine bolts with NSN/Part Number 5306-01-417-5781 under solicitation SPE4A1-26-T-2505, issued by the Department of Defense through the Aviation Supply Chain office. The delivery is due within 192 days after order, and responses must be submitted by August 10, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by DLA. DFARS 252.225-7048 governs compliance with these restrictions, which apply uniformly to all entities, including U.S. companies and their foreign subsidiaries. The point of contact for inquiries is Jade Stringfield, reachable via email or phone, with performance located in New Cumberland, Pennsylvania.
Nonferrous Forging

POSTED

1 day ago

DEADLINE

in 7 days
View Details