Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

STUD, CONTINUOUS THREADED (BOLT-STUD), NICKEL COPPER ALUMINUM (K-MONEL) BOA Item 7016AE

Awarded

N3904026F0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of STUD, CONTINUOUS THREADED (BOLT-STUD), made from NICKEL COPPER ALUMINUM (K-MONEL), under item number 7016AE, issued by the Portsmouth Naval Shipyard Gf under the Department of Defense. The solicitation number is N3904026F0007 and was posted on June 23, 2026, with the award notice indicating a total small business set-aside as defined by FAR 19.5, meaning only small businesses are eligible to compete. The North American Industry Classification System code is 332722, which corresponds to the manufacture of other fabricated metal products. Performance of the contract will take place in Kittery, Maine, with a zip code of 03904, while the contracting office is located in Portsmouth, New Hampshire. Primary point of contact is Lauren LeDuc, reachable via email and phone, with Victoria MacLellan serving as the secondary contact for further inquiries. The contract is accessible through the SAM.gov workspace portal for official viewing and documentation.

General Info

Small business set-aside for K-Monel threaded studs procured by Portsmouth Naval Shipyard for delivery to Kittery, Maine.

Agency

Department Of Defense → Portsmouth Naval Shipyard Gf

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedJun 23

Award Notice

AwardedOct 29

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

Contacts2 people available

OfficePORTSMOUTH, NH, 03801-5000, USA

Organization / AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

Office AddressPORTSMOUTH, NH, 03801-5000, USA

Contacts

Lauren LeDuc

contact@example.gov

+1 (555) 000-0000

Victoria MacLellan

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=1775710b58d24c268336c077300e4e04

Similar Contracts

Same NAICS industry code

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

about 5 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Aerospace Fastener Supply (NASM Standard)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 10 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Spring Pins (NSN 5315-01-599-0440)This subcontract involves the sourcing or fabrication of two spring pins under NSN 5315-01-599-0440 for prime contractors delivering to the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The selected provider must ensure all components adhere to the DLA Master List of Technical and Quality Requirements and maintain domestic origin. Additive manufacturing processes are strictly prohibited unless specific authorization is granted. The project falls under NAICS code 332722 and will be performed at Camp Pendleton, California. Interested parties must respond by November 9, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

Supply of Pin Straight Headless (NSN 5315015261934)This subcontract involves the supply of 220 units of Pin Straight Headless, identified by NSN 5315015261934, to support prime contractors delivering on Department of Defense contracts for the ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing the hardware components and ensuring all items are packaged according to ASTM D3951 and palletized in compliance with RP001 DLA Packaging Requirements for Procurement. The contract falls under NAICS code 332722 and requires delivery of the specified units to a designated DLA location in New Cumberland. Interested parties must have submitted responses by the deadline of November 2, 2026, to be considered for this procurement effort.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Wiring Harness Manufacturing and IntegrationThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC, involves the manufacturing and integration of wiring harness bracket assemblies for prime contractors. The scope of work includes cutting, stripping, crimping, and routing military-grade wiring in accordance with TDP Rev C Gen 3, as well as performing continuity testing for First Article Testing. Eligible bidders must be small businesses and maintain strict certifications, including ISO 9001:2015, ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2. The solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Precision Manufacturing of Double Hexagon Nuts with Extended Washers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Portsmouth Naval Shipyard Gf

Same awarding agency

Industrial Pumping and Fluid Transfer Equipment Rental/SupplyThis subcontract for Industrial Pumping and Fluid Transfer Equipment Rental/Supply supports prime contractors at the Portsmouth Naval Shipyard in Kittery, Maine. The scope of work involves the provision, delivery, and setup of specialized infrastructure, specifically high-capacity pumps designed for sewage and solidified grease, along with 1.5 inch CAM lock quick-disconnect water hoses. To ensure safety and operational compliance within the Department of Defense environment, all provided equipment must be certified according to 33 CFR Part 154 and NSTM S9086-WK-STM-010 standards. The opportunity is categorized under NAICS code 532490, with a response deadline set for November 4, 2026.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 15 hours ago

DEADLINE

Wastewater and Sewage Disposal ServicesThis subcontract for Wastewater and Sewage Disposal Services supports prime contractors at the Portsmouth Naval Shipyard in Kittery, Maine. The scope of work involves the transport and off-site disposal of waste extracted from submarine sanitary tanks, utilizing vacuum trucks and temporary external storage tanks to move materials to approved facilities. The contractor is responsible for ensuring all operations comply with federal, state, and local regulations, including the use of hose assemblies marked according to 33 CFR Part 154. All extracted waste must be legally disposed of, with the contractor providing the necessary manifests to verify proper disposal.

Hazardous Waste Collection

POSTED

about 15 hours ago

DEADLINE

Specialized Sanitary Tank Cleaning and DisinfectionThis subcontract for Specialized Sanitary Tank Cleaning and Disinfection involves the pumping, cleaning, and sanitization of three submarine sanitary tanks at the Portsmouth Naval Shipyard in Kittery. The scope of work includes hot water pressure washing, bacterial culture, tank heating, and caustic soda cleaning to meet SSPC-SP 1 standards. The final deliverable consists of three cleaned and sanitized tanks that successfully pass inspection. Compliance with NAVSEAINST 4350.2 and 29 CFR 1915 is mandatory, and all personnel must be medically qualified in MES 702 and MES 716. This project falls under NAICS code 562991 and is managed through the Department of Defense. The response deadline for this opportunity is November 4, 2026.

Septic Tank and Related Services

POSTED

about 15 hours ago

DEADLINE

Heavy Equipment Transport to Naval Submarine Base New LondonThis subcontract opportunity is for the provision of freight and delivery services to support prime contractors on Portsmouth Naval Shipyard projects. The primary scope of work involves the transportation of a 100 HP LPAC unit from the supplier's location to the Naval Submarine Base New London in Groton, Connecticut. To ensure safe transit, the contractor must utilize flatbed trucks or heavy-haul equipment and strictly adhere to ASTM-D-3951-18 packaging standards. The project is designated as a total Small Business Set Aside under NAICS code 484220 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, at 3:00 PM. All services will be performed in Groton, Connecticut, ensuring the secure delivery of critical equipment to the naval facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

LPAC Preventative Maintenance and Weekly InspectionsThis small business set-aside subcontract involves providing recurring maintenance and safety inspections for the LPAC system at the Portsmouth Naval Shipyard in Groton. The selected contractor will support prime contractors by performing weekly inspections and executing preventative maintenance tasks utilizing industrial diagnostic equipment. Key deliverables include the submission of a Maintenance Support Plan as specified in the contract exhibits, along with the delivery of weekly inspection logs and Maintenance Service Reports. This effort falls under NAICS code 811310 and is managed under the Department of Defense.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

LPAC Start-up, Commissioning, and Operator TrainingThis subcontract, titled LPAC Start-up, Commissioning, and Operator Training, supports prime contractors on projects at the Portsmouth Naval Shipyard. The scope of work involves the technical setup, testing, and commissioning of LPAC equipment to ensure full operational readiness. Additionally, the contractor is responsible for providing comprehensive operation training to base personnel utilizing Engineering Data Sheets and technical operating instructions to deliver a fully functional air system. The opportunity is designated as a total Small Business Set Aside under NAICS code 811210 for the Department of Defense. Performance will take place in Groton, with a response deadline set for November 9, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

100 HP Low Pressure Air Compressor (LPAC) RentalThis small business set-aside subcontract involves the lease and delivery of one electric-powered 100 HP Low Pressure Air Compressor package to support prime contractors at the Portsmouth Naval Shipyard located at Naval Submarine Base New London in Groton. The required rental unit must be capable of producing 400 CFM and must be equipped with a mandatory Emergency Stop feature. All equipment packaging is required to adhere to ASTM-D-3951-18 standards. The contract is managed under NAICS code 532490 for the Department of Defense, with a response deadline set for November 9, 2026.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 15 hours ago

DEADLINE

Rental (1) 400 LPAC System- NLON- Groton, CT

Solicitation # N3904027Q3208

Portsmouth Naval Shipyard is soliciting firm fixed price quotes for the lease of one electric powered 100 HP Low Pressure Air Compressor (LPAC) with a 400 CFM capacity and an emergency stop feature to establish a tool air system. The place of performance is the Naval Submarine Base New London in Groton, Connecticut. This is a total small business set-aside under NAICS code 532490. The scope of work includes the equipment rental, start-up and commissioning, set-up and operation training, and associated freight. Additionally, the contractor is responsible for preventative maintenance and weekly inspections, with deliverables including a maintenance support plan, service reports, and technical operating instructions. The contract will be awarded based on best value, evaluating technical capabilities, adherence to the delivery schedule, and relevant experience with LPAC rentals within the last five years. Offerors must submit their quotes via email to William LeDuc III by November 9, 2026, at 10:00 AM ET. Submissions must include completed RFQ pricing pages, technical documentation demonstrating compliance with the statement of work, and a point of contact with a CAGE code and UEI. Payment will be processed through WAWF or GCPC for amounts up to 100,000 dollars. All equipment must be clearly tagged and marked, and packaging must adhere to ASTM-D-3951-18 standards.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 15 hours ago

DEADLINE

PNSY- Sanitary Tank Cleaning

Solicitation # N3904027Q3160

Solicitation N3904027Q3160 is a total small business set-aside for the cleaning and sanitization of three sanitary tanks at the Portsmouth Naval Shipyard in Kittery, Maine. The government intends to award a firm-fixed-price purchase order for a period of performance running from February 8, 2027, to July 7, 2027. The scope of work includes pumping tank contents at least 400 feet from the submarine to temporary storage, utilizing methods such as hot water pressure washing, bacterial culture, or caustic soda, and the off-site disposal of all waste in accordance with federal, state, and local regulations. Contractors must provide a Technical Work Document, a planned schedule of work, and daily status reports. Award will be based on best value, evaluating technical acceptability and relevant experience, specifically requiring documentation of two projects involving sanitary tank cleaning completed within the last five years. Technical submissions rated as unacceptable will disqualify the entire quote. Quality acceptance is determined by PNSY Code 133 or 250 inspectors based on SSPC-SP 1 cleanliness standards and specific bacteriological limits for E.COLI and ENTEROCOCCI. Failure to pass inspection more than once results in a penalty of 5 percent of the total CLIN value. Invoicing must be processed through Wide Area Workflow, and all work must comply with NAVSEAINST 4350.2 and relevant safety and respiratory protection standards.

Septic Tank and Related Services

POSTED

about 15 hours ago

DEADLINE

Rental of Propane Water Heater (600,000 BTU/hr) and associated components

Solicitation # N3904027Q3102

Portsmouth Naval Shipyard is soliciting quotes for the rental of one propane-powered water heater with a minimum output of 600,000 BTU/hr and associated components for use at Naval Base Point Loma in San Diego, California. This total small business set-aside under NAICS 532490 requires a frame or skid-mounted system equipped with lifting pad eyes, fork truck pockets, and a minimum 200-gallon external propane supply. The contractor is responsible for providing all necessary monitoring gauges, isolation valves, and safety features in compliance with ASME Boiler and Pressure Vessel Code Section IV and California emissions standards. The scope of work includes the equipment lease, freight, training, and comprehensive maintenance consisting of surveillance checks, weekly inspections, and repairs. The contract is a firm-fixed-price award based on the lowest price technically acceptable criteria, with the government reserving the right to award based on the ability to meet the required schedule. The base period of performance is from March 1, 2027, to May 31, 2027, with two optional one-month extensions available. Key deliverables include certification data reports, technical manuals, personnel rosters, and maintenance support plans, with electronic submissions managed through Wide Area Workflow. Additionally, contractors must adhere to strict Operations Security and Portable Electronic Device requirements to protect sensitive government information. Responses are due by November 3, 2026, and must include technical documentation of capabilities and past performance from the last three years.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Photographic Documentation and ReportingThe contract calls for the capture and delivery of high-resolution, timestamped, and geotagged photographic documentation to support installation, removal, and verification activities, ensuring precise visual records for compliance and operational reporting. All images must meet strict technical standards to enable accurate contextual analysis, with metadata embedded to verify location, timing, and task alignment. This work is critical for maintaining accountability and providing verifiable evidence of condition changes or procedural completion at the specified performance location in Kittery, Maine. This subcontract, classified under NAICS code 541922, is issued by the Portsmouth Naval Shipyard under the Department of Defense and is targeted to support defense-related maintenance and verification operations. The requirement emphasizes technical precision and reliability in visual documentation, with all deliverables expected to serve as legally defensible records. Performance is confined to the Kittery area with zip code 03904, and the contract was posted on August 6, 2026, indicating an upcoming procurement timeline for qualified vendors to respond and fulfill the photographic service obligations.

Commercial Photography

POSTED

DEADLINE

Removal and Restoration ServicesThe contract mandates the complete removal of all bus wraps upon termination, requiring thorough cleaning to eliminate any adhesive residue and full restoration of the vehicle surfaces to their original pre-wrap condition. This work must be performed to professional standards, ensuring no lasting damage or cosmetic impairment to the underlying paint or material. The service is classified under NAICS code 238990 for other construction specialties and is issued as a subcontract by the Portsmouth Naval Shipyard Gf under the Department of Defense, with performance required at the location in Kittery, Maine, zip code 03904. The solicitation was posted on August 6, 2026, and while no specific set-aside details or point of contact are provided, the scope emphasizes meticulous execution to return the buses to pristine condition without trace of the applied graphics.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

53--TWIST LOCK ASSEMBLY

Solicitation # SPE7L1-26-T-583M

Defense Logistics Agency

POSTED

DEADLINE

53--WASHER,FLAT

Solicitation # SPE4A6-26-T-67P2

Defense Logistics Agency

POSTED

DEADLINE

53--NUT,PLAIN,BARREL

Solicitation # SPE4A6-26-U-3222

Defense Logistics Agency

POSTED

DEADLINE

53--LEVER,MANUAL CONTRO

Solicitation # SPE7LX26U8031

DLA Land And Maritime

POSTED

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-99K7

ASC COMMODITIES DIVISION

POSTED

CLOSED

STUD, CONTINUOUS THR

Solicitation # SPE4A6-26-T-98T5

ASC COMMODITIES DIVISION

POSTED

CLOSED

Solicitation # SPE4A6-26-T-80Y4

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-75H5

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7LX26FAUTZ

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CLOSE TOLERAN

Solicitation # SPE4A526FB7Q6

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CLOSE TOLERAN

Solicitation # SPE4A6-26-T-98K6

ASC COMMODITIES DIVISION

POSTED

CLOSED

Solicitation # SPE4A6-26-T-99F1

ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS