Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STUD, STEPPED

Active
SPE4A5-26-T-283MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five stepped studs identified by NSN 5307-01-326-9582 under solicitation SPE4A5-26-T-283M, with a delivery requirement of five days ADO. The item must comply with MIL-STD-130N for identification marking of U.S. military property, though item unique identification is explicitly not required as per the service customer's request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. The material has no shelf life restriction. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II, or with AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes default to major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but requires zero non-conformances unless otherwise stated. Measuring and test equipment must meet RT001 standards, and DLA packaging requirements apply. Covered defense information may be involved per RD003, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies per RQ011. The solicitation was posted on July 17, 2026, with a response deadline of July 22, 2026, and is managed by the DLA Supplier Operations OEM Division, with Caroline Simpson as the point of contact.

General Info

Five stepped studs NSN 5307-01-326-9582 requested by DLA due July 17, 2026, U.S. origin.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-283M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Caroline Simpson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD,STEPPED
STUD,STEPPED
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
SPE4A5-26-T-283M
SECTION B
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5307-01-326-9582 Quantity: 5 EA Purchase Request: 7017446314QTY: 5 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Supply of Spring Tension Washers (NSN 5310-14-414-7491)
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
PIN-RIVETThe contract pertains to the procurement of 514 units of PIN-RIVET with NSN 5320-01-164-1692 under solicitation SPE4A7-26-Q-0846, with a response deadline of July 21, 2026, and a required delivery within 36 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance mandates CMMC Level 2 either through a self-assessment or certified third-party assessment. Packaging must adhere to DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contracting activity is the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Brad Ingram listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAGThe contract pertains to the procurement of 1,000 self-locking hexagonal nuts with the NSN 5310-01-358-7622, solicited under number SPE7M2-26-T-5458 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 6, 2026, with a response deadline of July 17, 2026, and is intended for federal procurement with no set-aside classification. The purchase request number associated with this solicitation is 7017363953, indicating a formal requirement within the DoD supply chain. All performance and delivery are expected to comply with standard federal contracting guidelines, though specific performance location details are not provided. The solicitation is accessible via the DIBBS portal for interested vendors seeking to submit bids.
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract specifies the procurement of 293 units of BOLT, SHEAR with NSN 5306-01-129-0566 under solicitation SPE4A6-26-T-05DZ, with a delivery requirement of 191 days from the award date, to be shipped FOB origin to DLA Distribution Jacksonville at the designated parcel post and freight shipping addresses. The item must comply with strict DLA packaging requirements, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. The contract mandates zero non-conformances in sampling per MIL-STD-1916 or comparable zero-based plans, with verification levels assigned to critical, major, and minor attributes and all attributes treated as major unless otherwise specified. Only approved suppliers—HOWMET GLOBAL FASTENING SYSTEMS INC, SPS TECHNOLOGIES LLC, and HEARTLAND PRECISION FASTENERS INC—are authorized to furnish this part, identified by the same part number ST3M807-3-4 across different manufacturer codes. The item is designated as a critical application item requiring full compliance with configuration change management, source approval documentation, and removal of government identification from non-accepted supplies. All packaging and palletization must follow RP001 and DLA standards, with no variance permitted in quantity—exactly 293 units are required. The contract mandates delivery by January 25, 2027, with inspection and acceptance occurring at destination under DLA’s transportation and shipping protocols.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract outlines the procurement of 2,632 shear bolts with part number NAS6704U16 and NSN 5306-01-248-9766 under solicitation SPE4A6-26-T-05EM, classified as a critical application item. Delivery is required within 64 days to DLA Distribution Cherry Point in North Carolina, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the delivery destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The item must be palletized according to DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in all stages including preservation, packaging, and labeling. Mercury is prohibited except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. The contract is issued for defense use under DoD unit of issue standards, with a purchase request number of 7017010426 and a response deadline of July 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLINDThis contract solicits 70 blind rivets (NSN 5320-00-883-9393) under a Firm Fixed Price arrangement with no tolerance for quantity variation, requiring delivery within 19 days after government direction. The item is classified as a commercial item and must comply with the current revision of the non-government standard NASM90353 Revision 4 dated December 19, 2024, with prior revisions for historically manufactured units still acceptable. Inspection and acceptance occur at origin, governed by MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributed quality levels align with critical, major, and minor characteristics as defined by the applicable drawing or specification. The item must be physically marked per RQ017 and packaged in compliance with ASTM D3951 while adhering to the higher-priority DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and palletization following RP001 DLA Packaging Requirements. The contract mandates adherence to cybersecurity standards including CMMC Level 2 self-assessment and prohibits the use of certain telecommunications and software services, including ByteDance-covered applications and equipment prohibited under the Federal Acquisition Supply Chain Security Act. The contractor must comply with FAR and DFARS clauses related to equal opportunity, labor rights, trafficking prevention, environmental restrictions including hexavalent chromium and fluorinated foams, and supply chain traceability. Payment is processed exclusively via WAWF, and the delivery destination is DLA’s New Cumberland Facility in Pennsylvania. Past performance, particularly SPRS assessments, carries the most weight in evaluation, followed by delivery schedule compliance and pricing, with award based on a trade-off approach rather than LPTA. The contract incorporates additional requirements for DPAS prioritization, whistleblower protections, and prohibitions on confidential internal agreements, and requires current representations in SAM.gov including UEI, CAGE code, and socioeconomic status.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of a machine screw identified by part number NAS8403-11 and NSN 5305013226100, manufactured to the NAS8402-8404 standard, Revision 5 dated 02/28/2020, with a thread class of 3A. The item is classified as a commercial item and must comply with applicable military and consensus non-governmental standards, accepting both current and prior revisions of the standard as long as they were valid at the time of manufacture. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for packaging, inspection, and identification marking. Packaging must conform to MIL-STD-2073-1E, with preservation methods, materials, and unit container details strictly defined, and marking must adhere to MIL-STD-129. Additional quality controls include zero-defect acceptance sampling per MIL-STD-1916 or comparable plans, with critical attributes requiring stringent verification levels. The use of mercury or mercury compounds in packaging is prohibited. The screws are to be delivered FOB origin in a quantity of eleven units within twenty days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin. The delivery destination is the Joint Logistics Unit East in Moorebank, Australia, with freight routed through an Australian government cargo office and DHL. The contract’s purchase request number is 7017436490, with a unit price of $11.00, resulting in a total value of $121.00. The solicitation was issued under number SPE4A6-26-T-04YQ, with a response deadline of July 17, 2026, and an original required delivery date of July 13, 2026. The contracting activity is the ASC Commodities Division under the Department of Defense, with Abigail Hatch listed as the primary point of contact. The NAICS code 332722 identifies the industry classification. All items must be fully compliant with government identification, traceability, and documentation requirements, and suppliers are subject to tailored quality requirements applicable to both manufacturers and non-manufacturers. Final delivery and marking must reflect all applicable specifications without exception.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SHOULDEREDThe contract pertains to the procurement of three shouldered washers identified by NSN 5310-01-260-3501, with a required delivery within 20 days after order placement. The solicitation, issued under number SPE4A6-26-T-04MV, was posted on July 17, 2026, with responses due by July 22, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards as outlined by DLA, and non-accepted supplies must have all government identification removed. Physical identification of the bare item must comply with marking specifications. Additionally, technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training on handling export-controlled technical data, and have received explicit approval from DLA. The place of performance is designated as FPO, with Abigail Hatch as the primary point of contact, reachable via email and phone provided in the contract details.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 1,725 units of a hexagon head cap screw identified by NSN 5305-01-653-2288, with a delivery requirement of 80 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to strict export control under ITAR or EAR regulations, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the U.S., and necessitating compliance with DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization may access the controlled data. Additionally, ozone-depleting chemicals are strictly prohibited in manufacturing or handling, with any substitute chemicals requiring prior approval unless already authorized by specifications. The contract mandates removal of government identification from non-accepted supplies and is issued under solicitation SPE7L5-26-T-4287 with a response deadline of July 22, 2026. The acquiring agency is the Department of Defense under Land Supplier Operations Engines, with performance to be delivered to Tracy, California, 95304-5000, and primary point of contact is Bradley Evans with DLA.
LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of eight spacer sleeve units identified by NSN 5365011753833 under solicitation SPE4A7-26-T-564K, with a firm delivery requirement of 20 days FOB origin and no quantity variance allowed. The item must comply with technical and quality standards referenced from the DLA Master List, including the NAS1056 Revision 9 specification, and is classified as a critical application item. All inspections and acceptances must occur at the point of origin, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise stipulated. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods defined, including preservation, wrapping, and unit container details. Palletization follows DLA procurement requirements, and special marking is not required. Delivery is directed to the Commanding Officer at INS TUNIR in Mumbai, India, with freight handled by Hawkeye Tracking, Inc., and the shipment must originate from the manufacturer by the required delivery date of July 8, 2026. The contract includes tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and all documentation must align with DoD unit of issue standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 64 flat washers with NSN/Part Number 5310-01-626-1245, issued under solicitation SPE4A6-26-T-05AH by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within five days after award, with the response deadline set for July 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior federal authorization, and access is restricted to contractors certified under the US/Canada Joint Certification Program who have completed required DLA training and approval processes. Physical marking of the item must comply with RQ017 requirements, while government identification must be removed from non-accepted supplies per RQ011. Item Unique Identification is not mandated per the Service customer’s request and DFARS 252.211-7003(c)(1)(i) applies. Packaging must adhere to DLA standards and cybersecurity compliance includes CMMC Level 2 certification for third-party assessors. Covered defense information applies, and the place of performance is identified as Chambersburg, Pennsylvania, with Nyjel Knowlin serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332311
New
DIBBS
Supply of Shipping and Storage Container Covers (NSN 8140-01-593-3819)The contract is for the firm fixed-price supply of 143 military-specification metal container covers identified by NSN 8140-01-593-3819, requiring full compliance with MIL-SPEC standards for design, materials, and performance. Delivery is F.O.B. Origin, meaning the contractor assumes all shipping risks and costs until the items are loaded for transport. The item falls under NAICS code 332311, indicating fabrication of metal tank and container manufacturing. The solicitation was posted on July 17, 2026, with responses due by July 26, 2026, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Performance location and point of contact details are not specified, but the contract is accessible through the DLA Dibbs portal for qualified suppliers.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SHAFT ASSEMBLY, FUELThe contract pertains to the procurement of 50 units of the SHAFT ASSEMBLY, FUEL CONTROL with NSN 2840-01-014-1882 and part number 3240348 manufactured by HONEYWELL INTERNATIONAL INC. Delivery is required within 200 days to DLA Distribution Cherry Point in North Carolina, with FOB origin terms and zero variance allowed in quantity. The item is designated as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, removal of government identification from non-accepted supplies, and cybersecurity certification at CMMC Level 2. Sampling and inspection protocols follow MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and attributes are classified with specified verification levels. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special identification codes required, and palletization must meet DLA packaging standards. The shipment must be delivered by April 17, 2026, with an original required delivery date of December 28, 2026, and all transportation logistics must follow DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-283Q, classified under NAICS code 336412, with Anthony Duguay designated as the primary point of contact.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333611
New
DIBBS
SHROUD, CONTAININGThis contract pertains to the procurement of a shroud containing item identified by NSN 2835-01-148-5503 and part number 160656-100, supplied by RTX CORPORATION, categorized as a commercial off-the-shelf (COTS) item. Two units are required to be delivered FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, adhering to DLA’s packaging standards, with no special marking required. Item Unique Identification is waived per the service customer’s request, though other quality and technical requirements referenced by R numbers are incorporated by reference from the DLA Master List. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances mandated unless otherwise specified, and attributes are assigned verification levels or AQLs as outlined. The item is designated a critical application item, and the contractor must complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. Measuring and test equipment used must meet RT001 standards, and all documentation for source approval, government identification removal, and physical item marking must be fulfilled as per specified clauses. Delivery is directed to DLA Distribution Depot Hill in Utah, with transportation governed by DLAD procedural notes. The solicitation, issued under contract number SPE4A5-26-T-8333, is a total small business set-aside under NAICS code 333611, with a response deadline of July 22, 2026, and a need ship date of August 18, 2026.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SIGHT, LIQThe contract is for one indicator, sight, liquid with NSN 6680-01-413-8344, to be delivered in a single unit within 20 days to the destination FPO AE 09554 aboard USS BATAAN LHD 5. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, unit and intermediate containers, and packaging code U, with no special marking required. Palletization follows DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shock-proof with secondary containment. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications follow designated verification levels or AQLs. Item Unique Identification is not required per the service customer’s request, and the item has no shelf life. The contract references technical and quality requirements from the DLA Master List, effective as of the solicitation issue date. The vendor must use the designated freight shipping address and avoid parcel post, shipping via the fastest traceable means. The required delivery date is May 26, 2026, with a response deadline of July 17, 2026, under solicitation SPE4A5-26-T-283G, issued by the Department of Defense’s ASC Supplier OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331210
New
DIBBS
TUBE, FUEL DRAINThis contract specifies the procurement of a fuel drain tube, identified by part number L21609G01 and NSN 4710-00-613-7270, with a quantity of three units to be delivered FOB origin within 169 days, with no acceptable variance in quantity. The item is classified as a commercial item and designated as a critical application item, subject to strict compliance with military and defense standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional uses approved by NAVSEA, with portable mercury-containing devices requiring dual containment and shockproof design. All packaging and palletization must conform to DLA Packaging Requirements and IP056 restrictions, and the delivery destination is specified as the DLA Distribution San Joaquin warehouse in Tracy, California. The contract was issued under solicitation SPE4A5-26-T-282T with a response deadline in July 2026, and the required delivery date is October 5, 2027, with a need ship date of January 3, 2027. The purchase request number is 7017409179, and primary point of contact is Donetta Nelson of the Department of Defense.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, THRUSTThe contract involves the purchase of 31 thrust pins with NSN 5315-00-009-5753 under solicitation number SPE4A5-26-T-213H, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on June 4, 2026, with a response deadline of June 12, 2026, and is classified under NAICS code 332721, indicating it pertains to the manufacturing of machine shops and turned products. The procurement is a federal opportunity with no set-aside designation, open to all eligible respondents, and performance is expected to occur within the United States. All inquiries and submissions must be made through the DIBBS portal using the provided UI link, and no specific point of contact or physical delivery address is listed in the contract data.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
BELL CRANKThe contract solicitation is for a Bell Crank part identified by NSN 1680-01-155-6036, with a requested quantity of three units. The solicitation number is SPE4A5-26-T-269P, issued by the Defense Logistics Agency under the Department of Defense, and was posted on June 30, 2026. Responses are due by July 8, 2026, and the procurement is structured as a federal solicitation with no specific set-aside designation. The place of performance and office address details are not specified beyond the United States, and no point of contact information is provided within the available data. The solicitation can be accessed via the DIBBS platform using the provided UI link.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
GAGE, ABSOLUTE PRESSThe contract pertains to the procurement of two absolute pressure gauges under NSN 6685-01-390-1677 and manufacturer part numbers F4H3D7F100000 and 4083-650051-003, sourced from Bristol Babcock Inc Helicoid Instruments Division and Hughes Missile Systems Co. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including a special delicate instrument code 05. Each unit must carry a temporary tag identifying the contract number, NSN, manufacturer part number, and rated accuracy without interfering with its use. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. Packaging and palletization adhere to DLA’s RP001 requirements, and no parcel post is permitted—shipping must occur via traceable means to Barksdale Air Force Base, Louisiana. The solicitation number is SPE4A5-26-T-283Z, with a response deadline of July 22, 2026, and the contract incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOOK, CARGOThe contract pertains to the procurement of HOOK, CARGO with NSN/Part Number 4030-01-508-1207, under Purchase Request 7017385011 for a quantity of three units. The solicitation is issued by the Defense Logistics Agency under the Department of Defense with solicitation number SPE4A5-26-T-271X, posted on July 5, 2026, and responses are due by July 13, 2026. The procurement is categorized as a federal solicitation with no set-aside designation applied, indicating it is open to all eligible contractors. The place of performance and office address details are unspecified, though the country code is listed as the United States. All communications and submissions must be made through the official DIBBS platform via the provided UI link, and no point of contact information is included within the solicitation data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSEDThe contract specifies the procurement of 116 units of a recessed washer with NSN 5310-01-447-6251 and part number 140-007-41S34-2 supplied by Bell Textron Inc under solicitation SPE4A5-26-T-283W. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling for simplified acquisitions. Item Unique Identification is not required, as confirmed by the service customer’s request and referenced DFARS clause. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adherence to DLA’s RP001 packaging standards, while DLA’s master requirements take precedence over ASTM. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Inspection and acceptance occur at the destination point, with no variance allowed in quantity. The unit of issue is each (EA), with delivery scheduled within 169 days FOB origin, to the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 3, 2027, and original delivery deadline of March 17, 2027. The material has no shelf life, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment must meet RT001 standards, and all packaging must be marked per applicable defense logistics directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
REPAIR KIT, NAVIGATIThis contract specifies the procurement of a repair kit for navigational instruments with the NSN 6605-01-597-8773 and a quantity of 66 units, to be delivered within 110 days under contract SPE4A5-26-T-283P. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, Appendix D, for kits, requiring all components to be packed in a single box with cushioning to prevent movement and damage, accompanied by a detailed contents list. Marking and barcoding must follow MIL-STD-129, with no special marking required, and palletization adheres to DLA packaging standards. The repair kit is designated as a critical application item and must be identified with specific part numbers from CPI SATCOM & ANTENNA TECHNOLOGIES INC and ROCKWELL COLLINS, INC. Sampling for quality verification must align with MIL-STD-1916 or ASQ H1331 using zero non-conformances unless otherwise stated, with unspecified attributes treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by procurement type and amendment dates. Item Unique Identification is not required per customer request. Hazardous materials shipping follows parcel post guidelines to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation rules reference DLAD procedural notes C19 and C20. The required delivery date is July 18, 2026, with a need ship date of May 12, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
ADAPTER, CONNECTORThe contract solicitates 30 units of an adapter and connector with NSN 5935-01-524-0999 under purchase request 7017227377. The solicitation, identified by number SPE4A5-26-T-251K, was posted on June 17, 2026, and responses are due by June 25, 2026. It is issued by the Defense Logistics Agency under the Department of Defense and falls under the NAICS code 334417, which corresponds to the manufacturing of other electronic components. The procurement is classified as a federal action with no specified set aside for small businesses or other categories. The place of performance and physical office address details are not provided, but the solicitation is accessible via the DIBBS system for bidder information and submission.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details