Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supercharger Housing and Gear Casting/Forging

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the casting and forging of raw metal components for the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines project. The scope of work includes creating molds and dies using high-grade alloys to produce blower assembly housings and internal gears specifically for Detroit-Diesel 6V53 and 6V53T engines, followed by initial rough machining. The final deliverables are semi-finished metal components delivered to New Cumberland. Strict quality standards are required for this project, including compliance with SAE AS9003 or ISO 9001. Additionally, the contractor must adhere to zero-based sampling protocols per MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, falling under NAICS code 331523.

General Info

Casting and forging metal engine components for DoD under strict quality standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

NAICS

331523 - Nonferrous Metal Die-Casting Foundries

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L5-27-T-0047.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPERCHARGER, ENGINE, NO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs casting and forging of raw metal components for prime contractors on DLA Weapons Support Land Supplier Opns Engines projects. Creates molds and dies for blower assembly housings and internal gears using high-grade alloys for Detroit-Diesel 6V53/6V53T engines. Performs initial rough machining. Requires SAE AS9003 or ISO 9001 compliance and zero-based sampling per MIL-STD-1916 or ASQ H1331. Delivers cast or forged semi-finished metal components.

Similar Contracts

Same NAICS industry code

USNS COMFORT (T-AH 20) Anodes

Solicitation # N3220527Q7008

Solicitation N3220527Q7008 is a firm fixed price requirement issued by MSCHQ Norfolk for the procurement of Wilson Walton brand anodes for the USNS COMFORT (T-AH 20). The government intends to award this contract to Wilson Walton International, Inc. as the sole source vendor, provided the quote is technically acceptable and the price is determined to be fair and reasonable. The requirement includes multiple line items, such as copper anodes, with a final delivery deadline of January 15, 2027. Delivery is FOB Destination to the MSC Warehouse in Norfolk, Virginia, and requires a 48-hour advance notification. The contractor must adhere to strict packaging and marking standards, including DOD Manual 4140.01 Volume 9, MIL-STD 129R for markings, and ISPM 15 for wood packaging. Additionally, items must feature two-dimensional data matrix symbology for Item Unique Identification (IUID) in compliance with ISO/IEC International Standard 16022. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system. This unrestricted solicitation requires offerors to submit a detailed price quote and technical submission, including part numbers and country of origin, via email to the designated contracting officials.

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-0950

Solicitation SPE4A6-27-T-0950 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of five machine keys, identified by NSN 5315-01-381-2239. The contract is issued under the First Destination Transportation program with shipping terms set as FOB Origin, with the final delivery destination located in Tracy, California. The required delivery date is October 31, 2027, with a need ship date of May 21, 2027, allowing for a delivery period of 217 days. All quotes must be submitted via the DLA Internet Bid Board System by October 15, 2026. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including mandates for combating trafficking in persons, safeguarding covered defense information per NIST SP 800-171, and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Valve Body Casting ManufacturingThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the manufacture of precision steel castings specifically for valve bodies. The scope of work focuses on producing components that strictly adhere to established dimensional and material specifications required for industrial valve applications, intended for instances where the prime contractor outsources these manufacturing needs. Classified under NAICS code 331523, the agreement ensures that all delivered castings meet the rigorous technical standards necessary for industrial use. The contract was posted on July 13, 2026, and is tracked via the DIBBS system to maintain quality and compliance across the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Casting and Foundry ServicesThis subcontract, titled Precision Metal Casting and Foundry Services, is issued by the Defense Logistics Agency under the Department of Defense. The agreement focuses on the delivery of precision nonferrous die-casting services specifically for the production of vehicular suspension components used in defense manufacturing. The scope of work encompasses the entire production lifecycle, including pattern making, mold creation, pouring, finishing, and rigorous quality assurance. Classified under NAICS code 331523, the contract ensures that critical metal components meet the exact specifications required for military vehicular applications.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Class 1 Castings for Pump ComponentsThis contract involves the supply of precision steel investment castings that comply with MIL-STD-2175 Class 1 standards, intended for use in axial piston pump assemblies. The contract emphasizes stringent requirements for full traceability and defense-grade quality control to ensure the highest level of reliability and performance for military applications. The work will support the Department of Defense, specifically through the DLA Aviation office in Oklahoma City, reflecting the contract’s focus on meeting rigorous military specifications. As a subcontract opportunity under NAICS code 331523, the contract aims to secure high-quality castings essential for critical pump components. While location details and points of contact are not specified, the solicitation was posted in March 2026 and aligns with defense industry standards and requirements. The contract underlines the importance of adherence to tight quality assurance processes and full documentation to meet the demands of defense procurement.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Class 1 Casting Supply for Actuator Components

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Metal Casting or Forging SupplyThe contract involves the supply of raw or semi-finished valve body housings that are either forged or cast, with stringent requirements for high-pressure integrity and material traceability. These components must meet specific defense standards, ensuring reliability and quality suitable for military applications. The procurement is managed by DLA Aviation under the Department of Defense, emphasizing the strategic importance of the materials and the critical nature of compliance with rigorous specifications. Performance of the contract is expected to take place in Richmond, with a focus on providing specialized metal castings or forgings classified under the NAICS code 331523. As a subcontract opportunity posted in early November 2025, this contract does not specify a set-aside type, indicating it may be open to a broader supplier base capable of meeting the demanding technical and quality assurance requirements essential for defense-related manufacturing.

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Same awarding agency

Military Packaging and Distribution ServicesThis small business set-aside subcontract involves providing specialized packaging and distribution services for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for packaging, marking, and palletizing items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Key operational requirements include the coordination and delivery of shipments to DLA Distribution centers located in Barstow, California, and Texarkana, Texas. The successful provider must demonstrate proficiency in using the Wide Area Workflow system for all necessary shipping documentation. Performance of these services is centered in Barstow, California, under NAICS code 488510. Interested parties must adhere to the response deadline of October 19, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

ASTM B187 Compliant Material SupplyThis subcontract, titled ASTM B187 Compliant Material Supply, involves the provision of raw copper-silver-phosphorus alloy materials for prime contractors supporting DLA Weapons Support Land Supplier Operations Engines. The materials must strictly adhere to ASTM B187 standards and military specifications, with the supplier required to provide all necessary material certifications and test reports to verify compliance. The scope of work includes the delivery of these certified raw materials directly to the manufacturer, with performance taking place in Barstow, California. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 327992. Managed by the Department of Defense, the solicitation was posted on October 9, 2026, with a response deadline of October 19, 2026.

Ground or Treated Mineral and Earth Manufacturing

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis small business set-aside subcontract involves the application of specialized protective coatings for prime contractors supporting DLA Weapons Support Land Supplier Operations. The scope of work focuses on the application of Chemical Agent Resistant Coatings in accordance with DCCS Drawing 16236 CS-2300-0001, as well as high-temperature coatings following Army specifications. The primary deliverable consists of coated cable assembly components, and the contractor must maintain CARC application certification to ensure all work meets the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in Barstow, California. Interested parties must adhere to the solicitation timeline, with a response deadline set for October 19, 2026. The contract is categorized under NAICS code 325510 and is designated as a total small business set-aside.

Paint and Coating Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of 712 special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support Land Supplier Operations Engines. The work must be performed in accordance with TDP Rev C Gen 3 and specific Army drawings, with quality control sampling conducted per MIL-STD-1916, ASQ H1331, and QAP 16236. Performance will take place in Barstow, California. The project is designated as a Total Small Business Set-Aside under NAICS code 335931. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with ITAR/EAR regulations, CMMC Level 2, and JCP certification requirements. The response deadline for this Department of Defense opportunity is October 19, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE7L5-27-Q-0007

Solicitation SPE7L5-27-Q-0007 is a Firm Fixed Price request for the procurement of 712 special purpose electrical cable assemblies (NSN 5995-00-772-8813), divided into two line items of 178 and 534 units. This is a Total Small Business Set-Aside issued by the Defense Logistics Agency Weapons Support Land Supplier Operations Engines. Deliveries are required within 275 days after order to DLA Distribution centers in Barstow, California, and Texarkana, Texas. Award will be based on best value, evaluating price, offered delivery, and past performance. The contractor must adhere to strict technical and quality standards, including TDP Rev C Gen 3, QAP 16236, and ASTM B187. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the origin. Due to the nature of the technical data, this contract is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Additionally, the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and use the Wide Area WorkFlow system for all invoicing and payment requests.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Industrial Phosphate Coating ServicesThis subcontract for Industrial Phosphate Coating Services supports the DLA Weapons Support Land Supplier Opns Engines. The selected contractor will be responsible for applying protective phosphate finishes to gears, specifically performing Heavy Phosphate per MIL-DTL-16232 and Light Phosphate per TT-C-490. Work will be performed in New Cumberland, and the contractor must utilize industrial phosphate plating tanks while adhering to all prohibitions regarding ozone-depleting chemicals. To be eligible for this project, contractors must hold JCP Certification to ensure authorized access to necessary technical data. The contract was posted on October 8, 2026, with a response deadline of October 15, 2026. The primary objective is the delivery of finished gears that meet all approved protective phosphate coating specifications for the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Case Hardening and Metallurgical Testing ServicesThis subcontract for Case Hardening and Metallurgical Testing Services supports prime contractors on DLA Weapons Support Land Supplier Opns Engines projects. The scope of work involves performing case hardening and destructive testing, specifically measuring effective case depth according to ASTM E384 and verifying core hardness. To execute these tasks, the provider must possess a metallurgical lab equipped for sectioning and polishing, and must maintain JCP Certification to access necessary technical data. The contractor is responsible for delivering hardened gear batches along with formal test reports that verify the required case depth and core hardness. This project is managed under the Department of Defense and is associated with NAICS code 332813, with the place of performance located in New Cumberland. Interested parties should note the response deadline of October 15, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Machining and Fabrication of Spur GearsThis subcontract involves the precision machining and fabrication of spur gears for the DLA Weapons Support Land Supplier Opns Engines. The scope of work includes the machining of gear blanks and tooth cutting according to drawing INUW7 I15815555 Revision R to produce three final units and two units for First Article Testing. All deliverables must strictly adhere to the specified TDP dimensions. To qualify for this project, the manufacturer must possess CNC gear cutting equipment and maintain ISO 9001:2015 certification. Additionally, JCP Certification is mandatory to ensure authorized access to ITAR and EAR regulated data. The performance of the contract will take place in New Cumberland, Pennsylvania.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

Defense Kitting and Preservation ServicesThe Defense Kitting and Preservation Services subcontract involves providing assembly, packaging, and labeling support for prime contractors under the DLA Weapons Support Land Supplier Opns Engines. The scope of work requires the organization of individual components into units of issue, the application of preservation treatments, and the production of labels in strict accordance with MIL-STD-129 and MIL-STD-130. All packaging materials used must comply with MIL-STD-2073-1 and Appendix D to ensure the delivery of 64,000 fully packaged, marked, and preserved installation kits. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 339999 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 19, 2026, for this specific procurement action.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Cylinder Installation Kit Component SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency, requires the manufacture or sourcing of 64,000 sets of hardware components for Cylinder Installation Kit PN 23523189. The supplier must adhere strictly to Rolls-Royce Solutions America Inc specifications, ensuring all components are mercury-free and maintain configuration control in accordance with MIL-STD-973. Performance of the contract takes place in New Cumberland, Pennsylvania, and requires the use of precision machining equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710 and mandates full compliance with the Buy American Act. Interested parties must submit their responses by October 19, 2026.

POSTED

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, requires specialized military-grade packaging, marking, and preservation services for seven radiators. The contractor must execute Level A preservation and apply special marking code ZZ, ensuring strict adherence to MIL-STD-2073-1E, MIL-STD-129, and Federal Specification MIL-S-196. All work must be performed using approved preservation materials and marking equipment suitable for military shipment and storage. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510, with the place of performance located in New Cumberland. Interested parties must respond by October 19, 2026, to provide these essential services for prime contractors delivering DLA supply contracts.

Freight Transportation Arrangement

POSTED

DEADLINE

Supplier of Engine Coolant Radiators (NSN 2930013312987)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, requires the supply of seven engine coolant radiators. The radiators must be genuine or licensed equivalents matching Daimler Truck North America LLC part number A05-15171-000 and NSN 2930013312987. Delivery is specified as FOB Origin, and the contract strictly prohibits the use of additive manufacturing. The agreement is a total small business set-aside under NAICS code 336390. Compliance is mandatory regarding the Buy American Act, the Berry Amendment, and Item Unique Identification standards per MIL-STD-130 and DFARS 252.211-7003. The place of performance is located in New Cumberland, Pennsylvania.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS