Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Superpave Asphalt Mixture Design

Active

State & Local

Response Deadline08/17/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the development and certification of a Superpave asphalt mixture design tailored for paving operations, with a focus on performance grading and laboratory validation to ensure the mix meets required engineering standards. The work involves creating a durable, climate-adapted asphalt formulation that aligns with Superpave protocols, including material selection, characterization, and testing to validate performance under expected traffic and environmental conditions. All deliverables must be thoroughly documented and certified to guarantee compliance with industry best practices and long-term pavement reliability. This is a subcontract solicitation issued by Columbia County in Pennsylvania, posted on July 27, 2026, with responses due by August 17, 2026. The North American Industry Classification System code is 541380, indicating it falls under other scientific and technical consulting services. The place of performance is within Columbia County, though specific location details are not provided. The contract does not specify a set-aside designation or point of contact, and the full solicitation can be accessed through the PennBid portal at the provided link.

General Info

Develop and certify Superpave asphalt mixture for Columbia County, Pennsylvania, meeting performance and climate standards.

Agency

Pennsylvania → Columbia CountyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Columbia County, PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 02:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyPennsylvania → Columbia County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Pennsylvania → Columbia County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop and certify Superpave asphalt mix design for paving operations, including performance grading and lab validation.

Similar Contracts

Same NAICS industry code

Quality Assurance & Inspection at SourceThis contract specifies a comprehensive quality assurance and inspection service at the source for Government acceptance, encompassing First Article Testing, Product Verification Testing, and non-destructive testing to ensure compliance with contractual and technical requirements. The work is conducted under a Small Business Set-Aside as defined by the SBA, ensuring eligibility and participation by small businesses as the primary performers. The North American Industry Classification System code 541380 identifies the nature of the services as other professional, scientific, and technical services, with the performance focused on supporting defense-related supply chain objectives. The solicitation is issued by the Department of Defense through its Land Supply Chain organization, and responses are due on August 27, 2026, with the opportunity posted on July 28, 2026. The contract is structured as a subcontract, indicating it will be executed under a prime contract managed by another entity, with no specific place of performance or point of contact provided in the available data.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Hazardous Material Labeling and Safety Data ComplianceThe contract pertains to the development and validation of hazard labels and Safety Data Sheets that meet OSHA compliance standards for hazardous materials utilized in production or packaging operations. The work involves ensuring all labeling and documentation accurately reflect the chemical properties, risks, handling procedures, and emergency measures required by federal regulations, with a focus on aligning with OSHA’s Hazard Communication Standard. The deliverables must be technically accurate, consistently formatted, and verified through validation processes to guarantee regulatory adherence across all applicable materials. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 541380 for other scientific and technical consulting services. The contract was posted on July 28, 2026, and the scope of performance is not geographically restricted, though the work is tied to defense-related production or packaging activities. Compliance with federal safety regulations is critical, and failure to meet OSHA requirements could result in rejection of deliverables or operational disruptions. The subcontractor must possess expertise in chemical safety documentation and understand the unique demands of defense-sector supply chains.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Chemical Fume Hood (CFH) Performance Testing & Certification

State of Rhode Island

POSTED

about 11 hours ago

DEADLINE

Laminar Flow Clean Bench (LFCB) Testing & Recertification

State of Rhode Island

POSTED

about 11 hours ago

DEADLINE

Biological Safety Cabinet (BSC) Inspection & Certification

State of Rhode Island

POSTED

about 11 hours ago

DEADLINE

Bio Safety Cabinets, Laminar Flow Clean Benches, and Chem Fume HoodsThe Rhode Island Department of Health is seeking qualified firms to perform semi-annual inspection, testing, and certification services for Biological Safety Cabinets, Laminar Flow Clean Benches, and Chemical Fume Hoods at the Rhode Island State Health Laboratories. These services must be conducted in strict accordance with the requirements outlined in the Request for Quotes RFQ27006860 and the State’s General Conditions of Purchase, ensuring ongoing compliance with safety and operational standards. All work is to be carried out at facilities within Rhode Island, and vendors must demonstrate the expertise and credentials necessary to deliver accurate, timely, and certified results for critical laboratory equipment. Proposals must be submitted by the deadline of August 11, 2026 at 6:00 PM Eastern Time, with the solicitation posted on July 28, 2026. The primary point of contact for questions or additional information is Jonathan Valdez, who can be reached via email at jonathan.valdez@purchasing.ri.gov. Interested vendors are directed to either use the print/download button on the public bid board or log into their WebProcure account to access the complete solicitation details. There is no set-aside designation for this opportunity, and participation is open to all eligible firms meeting the technical and contractual requirements.

State of Rhode Island

POSTED

about 11 hours ago

DEADLINE

Inspection and Load Testing of Weight Handling Equipment, Base Elizabeth CityThe Contractor is required to perform comprehensive load testing, inspection, and reporting of all weight-handling equipment at USCG Base Elizabeth City, North Carolina, including bridge cranes, hoists, boat lifts, telehandlers, mobile cranes, and vehicle lifts. This encompasses providing all labor, transportation, equipment, materials, weights, measures, testing supplies, and supervision necessary to complete the work in full compliance with the Statement of Work. The contract will be awarded as a Firm-Fixed Price agreement to a small business as this procurement is entirely set-aside under NAICS code 541380 with a size standard of $19 million. All quotes must be submitted via email to Frank.M.Powers@uscg.mil no later than noon Eastern Time on August 25, 2026, and must adhere to the evaluation criteria outlined in 52.212-2. Prospective bidders are strongly encouraged to conduct a site visit to verify all equipment quantities and conditions prior to submitting a quote. A formal site visit is scheduled for August 11, 2026, at 1000 hours at the base, and interested parties must schedule appointments at least three days in advance with Michael.D.Barclift@uscg.mil. All visitors must complete a visitor access request form and present a valid Real ID or passport along with their full name, date of birth, and the last four digits of their Social Security number; exceptions apply for those holding a valid Military ID or RAPIDGate pass. Any questions regarding the solicitation must be submitted in writing to the Contracting Specialist by noon on August 17, 2026, and no oral inquiries will be considered. Amendments may be issued to clarify ambiguities, and all responses must be submitted electronically with no exceptions.

Base Elizabeth CITY(00081)

POSTED

about 13 hours ago

DEADLINE

Genome SequencingThe U.S. Department of Agriculture, Agricultural Research Service, through its Office in Beltsville, Maryland, is seeking quotations for genome sequencing services under solicitation number 1232SA26Q0959, issued as a combined synopsis and solicitation in accordance with FAR Part 12 for commercial items. This opportunity is exclusively set aside for small business concerns as defined by the North American Industry Classification System code 541380, with a small business size standard of $19 million in annual revenue, and is designated as a Total Small Business Set-Aside, meaning only small businesses are eligible to respond. All responsible small business sources are invited to submit quotations, and no separate written solicitation will be issued. Quotations must be submitted by the response deadline of August 5, 2026, at 1:00 PM Eastern Time, and the solicitation was posted on July 28, 2026. The place of performance is also in Beltsville, Maryland, with the contract managed by the USDA ARS AFM APD office. Primary point of contact for inquiries is Christopher Turner, reachable via email at christopher.c.turner@usda.gov. Further details and official submission guidelines can be accessed through the provided SAM.gov link.

USDA Ars Afm Apd

POSTED

about 13 hours ago

DEADLINE

Annual Chemical Fume Hoods, Laminar Bench Hoods, and Biosafety Cabinet RecertificationsThe US Forest Service Forest Products Laboratory in Madison, Wisconsin is seeking qualified small businesses to perform annual recertifications of chemical fume hoods, laminar bench hoods, and biosafety cabinets in 2026. This solicitation, identified as 12444526Q0059, is a total small business set-aside under FAR 19.5, exclusively available to businesses certified as small by the SBA, with the relevant NAICS code 541380 for scientific research and development services. The solicitation was posted on July 28, 2026, with proposals due by August 5, 2026, at 8:00 p.m. Eastern Time. All work must be performed at the laboratory located at One Gifford Pinchot Drive, Madison, WI, 53726. The primary point of contact for questions and submissions is Lawrence Jackson, reachable via email at lawrence.jackson@usda.gov or by phone at 771-210-1659. Although the contracting office is listed as located in Atlanta, Georgia, the services are exclusively required at the Madison facility.

Csa East 6 Usda-Fs

POSTED

about 13 hours ago

DEADLINE

VLF Voltage TestingThe 911th Air Force Reserve Base in Pittsburgh is seeking qualified contractors to perform Very Low Frequency (VLF) testing on approximately 75 medium voltage power line locations across the installation. This activity is part of a market research effort under a Sources Sought notice aimed at identifying capable businesses that can deliver comprehensive VLF testing services in accordance with IEEE 400.2, IEEE 43, NFPA-70, NETA, and other applicable standards. The work requires certified personnel to conduct site surveys, implement Lockout/Tagout procedures, isolate circuits, perform insulation resistance and VLF tests across a frequency range of 0.01 Hz to 0.1 Hz, identify insulation weaknesses, and remediate defects through repair or replacement as needed. A detailed digital report in spreadsheet format must be submitted upon completion, documenting test results, leakage current readings, defect records, and definitive Pass/Fail outcomes. The anticipated performance period is 300 days from the Notice to Proceed. Contractors must be fully compliant with Department of Defense Unified Facility Criteria, Air Force Engineering Technical Letters, and OSHA regulations, and must meet base access protocols including background checks and commercial vehicle inspections. Responses must include a Capability Statement covering company profile with CAGE Code and UEI, socio-economic status such as small business certifications, technical capability to complete all 75 sites within the timeline, verification of certified personnel, and at least three recent examples of similar work on military or large commercial facilities. Only electronic submissions to the designated email addresses by 12:00 PM on August 6, 2026, with the specified subject line format will be accepted. This notice is strictly for market research purposes—no contract award or payment is anticipated based on responses. The solicitation is a Total Small Business Set-Aside under NAICS code 541380.

FA6712 911 Aw Lgc

POSTED

about 13 hours ago

DEADLINE

Inspection and Testing ServicesThe contract seeks qualified providers to perform inspection and testing services for goods and services delivered under Texas Department of Transportation projects, ensuring strict adherence to TxDOT specifications and statement of work requirements. The scope centers on verifying compliance through sampling and analytical procedures to confirm materials and processes meet established standards for quality, safety, and performance across transportation infrastructure initiatives. This subcontract does not specify a set-aside classification and is categorized under NAICS code 541380, which pertains to other scientific and technical consulting services. The opportunity is open for responses until August 10, 2026, with the posting date listed as July 27, 2026, indicating it is a future procurement. Performance locations are not detailed in the provided data, and no point of contact information is included, though the solicitation is accessible via the TxDOT BonfireHub platform.

Texas Department Of Transportation

POSTED

DEADLINE

Quality Inspection and Conformance Testing ServicesQuality Inspection and Conformance Testing Services is a subcontract opportunity posted by Dallas Area Rapid Transit in Texas, seeking independent verification and testing of delivered goods to ensure full compliance with technical specifications, engineering drawings, and warranty requirements. The scope includes conducting objective assessments, generating detailed test reports, and managing non-conformances to maintain project integrity and quality standards. The solicitation was posted on July 27, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 541380 for other scientific and technical consulting services. Performance location and specific point of contact details are not provided, but responses must be submitted through the specified online portal by the stated deadline.

Dallas Area Rapid Transit

POSTED

DEADLINE

More opportunities from Pennsylvania → Columbia County

Same awarding agency

General Liability and Workers’ Compensation Insurance ProviderThe contract requires the provision of general liability and workers’ compensation insurance coverage for subcontractors engaged in work under Columbia County’s jurisdiction in Pennsylvania. The solicitation is categorized under NAICS code 524210, indicating it relates to insurance carriers and related activities, and is specifically targeted at entities capable of fulfilling insurance obligations tied to subcontractor operations. The opportunity is open to qualified providers who can demonstrate the ability to furnish compliant insurance policies that meet all statutory and operational requirements for liability protection and worker safety. Responses must be submitted by August 17, 2026, and performance is expected to support activities within Columbia County. This is a subcontract-focused procurement, meaning the insurance coverage must be structured to protect both the primary contractor and the county from financial and legal exposure arising from subcontractor activities.

Insurance Agencies and Brokerages

POSTED

DEADLINE

Submittal Coordination and Sample ManagementThe contract titled Submittal Coordination and Sample Management requires the contractor to prepare and manage all construction submittals, including shop drawings, material samples, and test reports, ensuring compliance with project specifications and timelines. This subcontract is issued by Columbia County in Pennsylvania under NAICS code 541690, which categorizes it under other scientific and technical consulting services, indicating a focus on technical coordination rather than direct construction. The opportunity is open for response until August 17, 2026, and performance is expected to take place within Columbia County, though specific location details are not provided. The contract does not include a set-aside designation, and no point of contact information is listed, requiring potential bidders to review the posted link for further details or inquiries.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Asphalt Paving SupplyThe contract entails the supply of hot mix asphalt meeting Superpave mix design specifications for paving operations within Columbia County, Pennsylvania. All materials must comply with stringent performance-based requirements to ensure durability, consistency, and adherence to industry standards for road construction. The submission deadline for responses is August 17, 2026, and the solicitation was posted on July 27, 2026, with work expected to occur primarily in Columbia County. This is classified as a subcontract under NAICS code 324121, which pertains to asphalt paving and related materials manufacturing. The contract does not specify a set-aside designation or indicate any particular organization type eligibility beyond the technical requirements for material supply. All bidders must ensure their offerings meet the specified mix design criteria and are capable of supporting the county’s paving infrastructure needs.

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

Concrete Saw CuttingThe contract requires precision saw cutting of concrete using wet-cutting methods for applications such as control joints, openings, or demolition purposes. It is issued as a subcontract under NAICS code 238990 by Columbia County in Pennsylvania, with a posted date of July 27, 2026, and a response deadline of August 17, 2026. Work must be performed within Columbia County, and all cutting operations must adhere to wet-cutting standards to ensure safety and minimize dust. There is no set-aside designation specified, and the opportunity is open to qualified subcontractors capable of delivering precise, high-quality concrete sawing services. Interested parties must submit responses through the provided PennBid portal before the deadline.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Class 1 Excavation ServicesThe contract titled Class 1 Excavation Services requires the performance of general earthwork and excavation tasks to prepare a site for construction, with specific duties including grading and trenching to meet project specifications. This is a subcontract opportunity posted by Columbia County in Pennsylvania, with a NAICS code of 238910 indicating it falls under miscellaneous specialty trade contractors. The solicitation was made public on July 27, 2026, and all responses must be submitted by August 17, 2026. Work is to be performed within Columbia County, though no additional details regarding the exact location or point of contact are provided. The contract does not specify a set-aside type or organizational preferences, and interested parties can access the full solicitation through the provided Pennsylvania bid portal link.

Site Preparation Contractors

POSTED

DEADLINE

Bloomsburg Area School District, Memorial Elementary School Parking LotThe project involves comprehensive parking lot improvements at Memorial Elementary School in Columbia County, Pennsylvania, including asphalt base repair, milling of existing surfaces, application of an asphalt overlay, line striping for parking and traffic markings, and relocation of fencing to accommodate the upgraded layout. These scope elements are designed to enhance safety, durability, and functionality of the school’s parking infrastructure. The solicitation was posted on July 27, 2026, with a response deadline of August 17, 2026, and is managed under the authority of Columbia County within the state of Pennsylvania. All work is to be performed on site at the school location, and bidders are expected to comply with the specified requirements and timeline.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE