Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supplier of Cold-Finish Round Metal Bars (NSN 9530-00-233-1309)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of cold-finish round metal bars, specifically NSN 9530-00-233-1309, for prime contractors working on DLA Dist San Joaquin procurement projects. The required materials are 1.000 inch diameter bars with H04 temper, weighing 3.040 lbs per foot and measuring between 10 and 12 feet in length. All deliverables must be accompanied by Mill-Material Certification and strictly adhere to MIL-STD-129, MIL-C-3993, and MIL-STD-2073-1E standards. The supplier must maintain a QSLD listing for FSG 95 and 96 and ensure full compliance with the Buy American Act and the Berry Amendment. Performance for this contract is centered in Tracy, California. Interested parties must respond by October 26, 2026, in accordance with the guidelines set by the Department of Defense.

General Info

Supply cold-finish round metal bars for DLA projects in Tracy, California by 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

332112 - Nonferrous Forging

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0085.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies cold-finish round metal bars for prime contractors on DLA Dist San Joaquin procurement projects. Provides 1.000 inch diameter bars with H04 temper and weight of 3.040 lbs per foot in lengths between 10 and 12 feet. Adheres to MIL-STD-129, MIL-C-3993, and MIL-STD-2073-1E standards. Requires QSLD listing for FSG 95 and 96 and compliance with Buy American Act and Berry Amendment. Delivers certified bars with Mill-Material Certification.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A5-27-T-1243

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4525

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4681

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A1-27-T-0149

Solicitation SPE4A1-27-T-0149, issued by the DLA Weapons Support Aviation Supply Chain, is a request for quotations for the procurement of 107 machine bolts, identified by NSN 5306014062182 and part number 3M1238-3-5. This is a critical application item that must adhere to technical and quality requirements set forth in the DLA Master List (RA001) and specific documentation for source approval requests (RC001). The procurement is conducted under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is June 14, 2027, with a need ship date of April 13, 2027, for delivery to DLA Distribution Cherry Point in North Carolina. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administratively, the contractor must use the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is governed by NAICS code 332112 and includes various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and specific prohibitions on certain telecommunications equipment. All quotations must be submitted via the DIBBS portal by October 23, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-1417

Solicitation SPE4A7-27-T-1417 is a fixed-price contract for the procurement of 192 machine bolts, identified by NSN 5306014351840. The items must be manufactured in accordance with technical standard ASME B18.2.3.4M-2001. Delivery is required within 171 days after the order, with shipping terms set as FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract incorporates strict quality and security requirements, including CMMC Level 2 self-assessment and adherence to the Buy American Act and Berry Amendment for domestic material sourcing. Packaging and marking must follow MIL-STD-129 and DLA-specific requirements (RP001), with inspection and acceptance occurring at the origin. Evaluation preferences are provided for certified HUBZone small businesses, while offers utilizing additive manufacturing are ineligible for award. Administrative requirements include the use of the Wide Area Workflow (WAWF) for invoicing and reporting.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0089

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Aluminum Alloy 6061 T-6 Bar SupplyThis subcontract involves the supply of 178 feet of round, cold-finished aluminum alloy 6061 T-6 metal bars to support prime contractors for Department of Defense DLA supply contracts. The required materials must be 1.625 inches in diameter and provided in lengths of 10 to 12 feet. All bars must strictly adhere to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards, and the supplier must provide Mill-Material Certification and maintain a QSLD listing. Logistical requirements specify that packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The materials are to be delivered FOB Origin to Tinker AFB in Oklahoma. This procurement falls under NAICS code 332112 and is managed by Depot Oklahoma.

POSTED

DEADLINE

Precision Machine Bolt ManufacturingThis subcontract involves the precision manufacturing and supply of 1,121 machine bolts to NSN 5306-01-006-9452 specifications for the DLA Weapons Support ASC Commodities Division. The scope of work includes performing First Article Testing on three units and ensuring all items are packaged according to ASTM D3951 and MIL-STD-129 standards. Final deliverables consist of the full quantity of bolts and a certified FAT report, with performance taking place at Robins Air Force Base. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems, hold JCP certification, and meet CMMC Level 2 requirements. This opportunity falls under NAICS code 332112 and was posted on October 14, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aluminum Alloy 7075 Special Shaped Structural Section ProductionThis subcontract involves the production of special shaped structural sections from Aluminum Alloy 7075 / T73511 for prime contractors supporting DLA supply contracts. The manufacturer is responsible for extruding the material into lengths of 10 to 12 feet using specific dies, namely Lockheed LS 4267, Tiernan 60-4215, or Pioneer PA 11161. All finished sections must include continuous identification markings and be delivered with Mill-Material Certification. The project is managed by the Department of Defense through Depot Hill, with performance taking place at Hill AFB. Compliance with SAE AMS-QA-A-200/11A and SAE AMS-QQ-A-200C standards is mandatory, and the provider must hold QSLM certification. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026.

POSTED

DEADLINE

Supply of Titanium Alloy (CP-70) BarsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of Titanium Alloy (CP-70) bars to support DLA supply contracts. The required materials consist of 0.625 inch diameter bars with lengths ranging from 10 to 12 feet. All supplies must be delivered to San Diego and adhere to strict quality and processing standards, including continuous identification marking per MIL-STD-129 and packaging requirements according to MIL-STD-2073-1E and ASTM A700. To ensure quality compliance, the provider must furnish mandatory Mill-Material Certification for all delivered goods. The procurement falls under NAICS code 332112, with a response deadline set for October 26, 2026. The final deliverable requires that all titanium alloy bars are fully certified, marked, and packaged according to the specified military and industry standards.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Machine Bolt Supplier (NSN 5306001068813)This subcontract involves the procurement of 2,006 machine bolts for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the bolts according to NSN 5306001068813 specifications, with a strict prohibition on the use of additive manufacturing. All items must be delivered to DLA Distribution Cherry Point and packaged in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials used. Additionally, the supplier must maintain a quality system that complies with either SAE AS9003 or ISO 9001 standards. The opportunity is categorized under NAICS code 332112 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306123324107)This subcontract involves the supply of 44 machine bolts for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing the bolts in accordance with NSN 5306123324107 and DLA Master List RA001. All materials must strictly adhere to the Buy American Act and the Berry Amendment, with delivery terms set as FOB Origin. Quality assurance requires sampling performed per MIL-STD-1916 or ASQ H1331, while packaging and marking must comply with ASTM D3951 and MIL-STD-129. The project falls under NAICS code 332112 and is managed by the Department of Defense. The response deadline for this requirement is October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Solicitation # SPE7L7-27-T-0274

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-27-T-0278

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

WHEEL, ABRASIVE

Solicitation # SPE85-27-T-0239

Solicitation SPE85-27-T-0239 is for the procurement of 317 abrasive wheels (NSN 3460-00-528-3113) for the DLA Distribution San Joaquin facility in Tracy, California. The specified wheels must be 4.000 inches in diameter, 0.062 inches thick, with a 0.500 inch diameter arbor hole, featuring aluminum oxide, 60 grit size, Q hard bond grade, and a rubber binder. All units must be marked with their maximum RPMs. Delivery is required by September 11, 2026, with a need ship date of September 29, 2026, and terms are set as FOB Destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129 for labeling, ASTM-D-3951-98 for commercial packaging in new and unused containers, and RP001 for palletization. Inspection and acceptance will occur at the destination. Compliance requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must provide size status representations and disclose any covered defense telecommunications equipment used in the performance of the award.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0204

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0291

Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0097

Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0238

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-T-0275

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7MC-27-Q-0010

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Packaging and Freight ServicesThis subcontract for Hazardous Materials Packaging and Freight Services supports prime contractors delivering supply contracts to DLA DIST SAN JOAQUIN. The scope of work involves specialized packaging and marking of battery-containing items in compliance with FED-STD-313 and TQ requirement IP025, as well as applying labeling according to MIL-STD-129. The selected provider is responsible for coordinating first destination transportation and ensuring all shipments are certified as hazmat-compliant. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 488510. Performance will take place in Tracy, California, for the Department of Defense. Interested parties must respond by October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of SureFire Aviator-RD FlashlightsThis subcontract, set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 423450, involves the procurement and supply of 376 genuine SureFire LLC P/N AVIATOR-RD flashlights. The contractor is responsible for ensuring all units comply with technical data specifications outlined in TDP Rev A Gen 1 and adhere to DLA packaging requirement RP001 and quality standard RA001. The deliverables are to be supplied to DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, to support prime contractors delivering on Department of Defense supply contracts.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS