This Subcontract opportunity from Department Of Defense was posted on August 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supplier of Steel Galvanized Wire Rope Clamps (P/N MS16842-13)

Closed

Federal

Submission Closed09/10/2026, 10:00:00 AM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331221

New

DIBBS

Plain Encased Seal Supplier (NSN 5330-00-154-2132)This subcontract involves the manufacture or procurement of plain encased seals for prime contractors supporting DLA Weapons Support Land projects. The required seals must feature steel cases and synthetic rubber elements, adhering to precise dimensions of a 5.750 inch shaft, 7.000 inch bore, and 0.562 inch width, with a performance rating of 2000 fpm surface speed. The supplier must provide asbestos-free certification and ensure all items are packaged according to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 standards. The final deliverable consists of two certified and packaged seals for shipment to Japan. This opportunity is managed by the Department of Defense under NAICS code 331221.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supplier of Hexagon Head Cap Screws (NSN 5305-012-6436-02)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the supply of 5,486 hexagon head cap screws under NSN 5305-012-6436-02. The screws must be manufactured or sourced in accordance with TDP Rev B Gen 2 and Basic Drawing NR 19207 12338225 Revision G. Performance is based in Albany, and the contract is designated as a total small business set-aside under NAICS code 331221. Strict quality and regulatory standards apply, including the requirement for ISO 9001 or SAE AS9003 quality systems and compliance with DFARS 252.225-7001. Technical specifications mandate sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-130N. The response deadline for this procurement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of COMP 301 Corrosion-Resistant Cold-Rolled Steel SheetsThis subcontract involves the supply of 13 COMP 301 corrosion-resistant cold-rolled steel sheets for prime contractors delivering to DLA Distribution Warner Robins. The materials must be precision cut to dimensions of 0.0400 inches by 36 inches by 10 feet, featuring a 2B finish and undergoing hard heat treatment. All deliverables must be accompanied by Mill-Material Certification and packed in accordance with MIL-STD-2073-1E and ASTM A700 standards. The contractor is required to maintain strict compliance with QSLM/QSLD standards and adhere to the Buy American Act. Performance will take place at Robins Air Force Base, with the project falling under NAICS code 331221 for the Department of Defense.

POSTED

DEADLINE

Aluminum Alloy 6061-T6 Tubing SupplierThis subcontract involves the supply of 391 feet of aluminum alloy 6061-T6 tubing for prime contractors delivering to the Defense Logistics Agency Weapons Support Fluid Handling Division. The tubing must meet Type 1 specifications with an outer diameter of 1.25 inches and a wall thickness of 0.049 inches, provided in random lengths between 10 and 12 feet. All products are required to feature continuous marking and lot numbering in accordance with WW-T-700/6 standards. The project falls under NAICS code 331221 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of PIN-RIVET (NSN 5320015499497)This subcontract involves the manufacture or procurement of 194 units of PIN-RIVET fasteners, identified by NSN 5320015499497, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is responsible for delivering the items FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. Strict quality and regulatory standards are mandated for this agreement, including ISO 9001:2015 inspection systems and sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure compliance with the Buy American Act, NIST SP 800-171 security standards, and specific military specifications for packaging and marking under MIL-STD-2073-1E and MIL-STD-129.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of 440 CRES Stainless Steel StockThis subcontract involves the supply of certified 440 CRES stainless steel raw material to prime contractors supporting DLA Weapons Support Fluid Handling Division aerospace projects. The material is specifically intended for the production of critical hydraulic components and must be accompanied by full material certifications and Mill Test Reports. These documents are required to verify strict compliance with aerospace industry standards and the Buy American Act. The procurement is managed under NAICS code 331221 for the Department of Defense, with the place of performance located in New Cumberland. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a final response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0265

Solicitation SPE8E4-27-T-0265 is a request for 13 sheets of corrosion-resistant, cold-rolled steel (COMP 301) with a hard heat treatment and 2B finish. The material must be 0.0400 inches thick, 36 inches wide, and 10 feet long, with a reference weight of 311.472 lbs per sheet. All material must be supplied in whole feet lengths only, and no sheets will be accepted unless they conform to exact dimensions, as test coupons are strictly prohibited. Delivery is required within 20 days after award, with a need ship date of December 7, 2026, and a destination of DLA Distribution Warner Robins in Georgia. Compliance with the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) is mandatory, and any product not meeting these terms is considered an unauthorized substitution. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, and manufacturer details, applied via stamping or stenciling. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM A700, ensuring items are protected from physical damage. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0276

This contract is a total small business set-aside for the procurement of 10 units of structural steel metal plating. The material is specified as ordinary strength, hot rolled, sheared edge, and annealed steel with dimensions of 0.250 inches thick, 72 inches wide, and 240 inches long. The product must be manufactured in accordance with MIL-S-22698C(2) and comply with the American Bureau of Shipping (ABS) Rules for building and classing steel vessels, Part 2, Section 1, including Appendix 2/D. Material will only be accepted if it is produced by an approved steel mill and includes an ABS Surveyor's endorsement on the certificates. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Strict marking standards per MIL-STD-129 are required, including the DLA contract delivery order number, NSN, and manufacturer details; failure to comply with these marking requirements is grounds for product rejection. Packaging must adhere to MIL-STD-2073-1E and ASTM A700, ensuring protection from physical damage. The contract is a fixed-price award with destination inspection and acceptance, requiring delivery within 76 days after order. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM).

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0275

This contract is a total small business set-aside for the procurement of 13 units of structural metal plates. The material is specified as ordinary strength, hot rolled, sheared edge, and annealed steel with dimensions of 0.250 inches thick, 72 inches wide, and 240 inches long. The plates must be manufactured in accordance with MIL-S-22698 and the American Bureau of Shipping (ABS) rules for building and classing steel vessels, and they must be supplied in whole feet lengths only. A critical requirement for acceptance is the endorsement of certificates by an ABS Surveyor and the provision of a Certificate of Quality Compliance with every shipment. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Strict marking requirements apply, including the use of stamping or stenciling to identify the DLA contract delivery order number, NSN, specification number, and manufacturer details; failure to comply with these markings is grounds for product rejection. Delivery is required within 20 days after receipt of order, with destination inspection and acceptance. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM A700, and the contract incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of mercury-containing compounds.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0274

This fixed-price solicitation, SPE8E4-27-T-0274, is for the procurement of 11 sheets of aircraft-quality steel (COMP 4130), cold finish and annealed, with dimensions of 0.125 inches thick, 36 inches wide, and 96 inches long. The material is designated as a critical application item and must be supplied in whole feet lengths only, with no test coupons allowed. Delivery is required within 20 days of award to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of December 7, 2026. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates a Certificate of Quality Compliance (Mill-Material Certification) for every shipment. Strict marking requirements apply, requiring each unit to be identified via stamping or stenciling with the DLA contract delivery order number, NSN, specification details, and manufacturer information. Packaging must adhere to MIL-STD-2073-1E and ASTM A700 standards to prevent physical damage. The procurement is governed by various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0159

Solicitation SPE8E4-27-T-0159 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of seven sheets of corrosion-resistant steel. The material must be COMP 304, cold rolled, quarter hard, with specific dimensions of 0.020 inches thick, 48 inches wide, and 96 inches long. Compliance with SAE AMS5910D and SAE AMS2807C is required, and the item is designated as a critical application item. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict adherence to technical specifications, noting that test coupons are not permitted and sheets must conform to exact dimensions. A Certificate of Quality Compliance must accompany every shipment. Rigorous marking requirements are in effect, requiring each unit to be identified with the contract delivery order number, NSN, specification number, grade, alloy, manufacturer name, heat and lot number, and dimensions using approved stamping or stenciling methods. Packaging and preservation must follow MIL-STD-2073-1E and ASTM A700, with delivery set for FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0273

Solicitation SPE8E4-27-T-0273 is a Request for Quotations for 14 sheets of aircraft quality steel, COMP 4130, which must be cold finish and annealed. The material specifications require a thickness of 0.125 inches, a width of 36 inches, and a length of 96 inches. The procurement is governed by technical standards SAE AMS2807C and QAP 13873, and requires a Certificate of Quality Compliance to be provided with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict adherence to dimensions, prohibiting the use of test coupons, and requires material to be supplied in whole feet lengths. Continuous identification markings, including the DLA contract delivery order number, NSN, and manufacturer details, must be applied via stamping or stenciling. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM A700, with all markings following MIL-STD-129. Delivery is set for February 14, 2027, with the inspection and acceptance point located at the destination, the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 7 days

AI Contract Overview

This subcontract involves the manufacture and supply of steel galvanized wire rope clamps for prime contractors supporting Department of Defense DLA supply contracts. The supplier is responsible for providing saddle-type clamps for 1.25 inch diameter wire rope that strictly adhere to P/N MS16842-13, Type I, Class I specifications. A critical requirement of this agreement is ensuring full compliance with DFARS 252.223-7008 concerning hexavalent chromium. The operational scope includes coordinating inspection and acceptance at the point of origin before delivering the finished products to the designated DLA location in Tracy, California. This opportunity is categorized under NAICS code 331221 and is associated with the Nuclear Reactor Program. Interested parties must respond by September 10, 2026.

General Info

Supply steel wire rope clamps for DoD DLA by September 10, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

NAICS

331221 - Rolled Steel Shape Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-26-T-6578.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, WIRE ROPE, SADDLE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 30

subcontract

Response DeadlineSep 10

Deadline has passed

Submission Closed

09/10/2026, 10:00:00 AM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies steel galvanized wire rope clamps for prime contractors delivering DLA supply contracts. Manufactures or sources saddle-type clamps for 1-1/4 inch diameter wire rope meeting P/N MS16842-13, Type I, Class I specifications. Ensures compliance with DFARS 252.223-7008 regarding hexavalent chromium. Coordinates inspection and acceptance at origin. Delivers finished wire rope clamps to the designated DLA location.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS