This Solicitation opportunity from Government of Canada was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply & Deliver One (1) Detachable Loader Mounted Snowblower

Closed

BT-2026PWE-PWT-21-TInternational

Submission Closed05/23/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # 645-DOTRFB-2966-2027

The Iowa Department of Transportation is soliciting proposals for a Guardrail Mower under solicitation number 645-DOTRFB-2966-2027, with a response deadline of August 24, 2026 at 6:00 PM Eastern Time. The solicitation is issued by the state and local government agency based in Ames, Iowa, and the work is to be performed in the same location. The contract is intended for the procurement of equipment designed to maintain vegetation along guardrails, ensuring road safety and visibility. All responses must be submitted through the official bidding portal prior to the deadline, and inquiries should be directed to Mallory Hunter, the primary point of contact, via email at mallory.hunter@iowadot.us or phone at 515-239-1347. No specific set-aside status or NAICS code is listed, indicating the contract is open to all eligible vendors without targeted preferences.

POSTED

DEADLINE

3740--Steel Green Sprayer for Asheville VAMC

Solicitation # 36C24626Q0870

The contract is for the procurement of a Steel Green Sprayer and associated accessories under solicitation number 36C24626Q0870, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 in Hampton, Virginia. The solicitation is exclusively reserved for small businesses as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 333112 indicating classification within the irrigation and agricultural spraying equipment manufacturing sector. The contract opportunity was posted on July 31, 2026, and responses are due by August 7, 2026, at 2:00 PM Eastern Time. The primary point of contact for inquiries is Kristine E Woodbury, Contract Specialist, reachable via email at Kristine.Woodbury@va.gov. The place of performance has not been specified, and all deliverables will be managed under the oversight of the VA office located in Hampton, VA, with a ZIP code of 23667.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Purchase of RC Mower - Remote-Operated Robotic Mower - *219360

Solicitation # IFS AVI B6000067

The City of Dallas is soliciting bids for the purchase of a remote-operated robotic mower under solicitation number IFS AVI B6000067, with the contract designated for aviation and field maintenance operations at 3387 Hawes St, Dallas, TX 75235. All items must be new, unopened, and in their original packaging, with no substitutions or alternatives permitted. Delivery is FOB the designated site, meaning bidders must include the full cost of freight in their pricing. Bids must be submitted exclusively through the online platform at https://dallascityhall.bonfirehub.com/login, and the response deadline is August 4, 2026, at 1:30 PM CT. The solicitation was posted on July 30, 2026, and failure to meet the specified requirements will result in rejection of the bid at the bidder’s expense.

POSTED

DEADLINE

2420--VENTRAC 4520N COMPACT TRACTOR

Solicitation # 36C24626Q0831

The Department of Veterans Affairs, through its Network Contracting Office 6 in Hampton, Virginia, is soliciting a single new Ventrac 4520N articulating compact tractor under solicitation number 36C24626Q0831, issued on July 28, 2026. This procurement is set aside entirely for small businesses under NAICS code 333112, with a size standard of 1,500 employees, and will be awarded on a lowest price technically acceptable (LPTA) basis. The tractor must be fully assembled, tested, and operational upon delivery, complete with factory-installed accessories including a heated seat, canopy, dual wheels, weight transfer system, hydraulic kit, and 3-point hitch. Delivery is required by September 1, 2026, to the Charles George VAMC in Asheville, North Carolina, with the contract period extending through August 31, 2027. The contract is firm fixed price and requires compliance with FAR 52.212-4 and VAAR clauses governing domestic shipment, packaging, and delivery. All proposals must be submitted electronically by August 7, 2026, to the Contract Specialist’s email, and must include a technical volume not exceeding 25 pages, pricing details, past performance information, and the required offer form. Contractors must ensure the equipment meets manufacturer specifications and conform to inspection criteria set by the Government, which reserves the right to inspect and accept the item at the delivery location. Acceptance is contingent upon successful operational testing and submission of all required documentation, including owner’s manuals and warranty records. The Government will pay via electronic funds transfer to its designated financial center in Austin, Texas, and contractors must submit invoices electronically through the VA’s designated system, in arrears after delivery. Special requirements include compliance with VAAR 852.204-72 for personnel vetting if access to VA-sensitive information is needed, adherence to 52.222-36 for equal opportunity for workers with disabilities, and prohibition of Kaspersky Lab products under 52.240-91. Offerors must hold an active UEI in SAM, be certified as a small business, and disclose any non-compliance with federal restrictions on covered telecommunication equipment or services within 72 hours. No contract value is specified as pricing is left to be determined by offerors,

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

31 FSS Rideable Field Mower

Solicitation # FA568226QA045

The government is seeking to procure a single rideable field/lawn cabin mower, specifically compliant with the TORO brand name or equal specification as outlined in the technical requirements, for use by the 31st Force Support Squadron. The solicitation, identified as FA568226QA045, was posted on July 29, 2026, with responses due by August 28, 2026, and is issued under FAR 52.211-6 Brand Name or Equal. Quoters must ensure their bids remain valid until September 30, 2026, as no funds are currently available, and awards will only be made once funding is secured. All deliveries must be shipped directly to Aviano Air Base in Italy with FOB Destination terms, and bidders assume all submission costs without reimbursement. The procurement is managed by the Department of Defense under the 31st Cons (unit 6102) office located in APO, AE, with point of contact information provided through Mikel Tomaj and Ali Elyousfi. There is no set-asides applied to this solicitation, and the NAICS code is 333112, indicating the category for agricultural and industrial machinery manufacturing. The place of performance is Aviano, Pordenone, Italy, and quotes must align precisely with the technical specifications attached to the combined synopsis and solicitation document. Participation is open, but offers are contingent upon future availability of funding and compliance with all stated delivery and validity requirements.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Supply of No-Till Grain Drill (Commercial Off-the-Shelf Equipment)The contract calls for the procurement and delivery of a single No-Till Grain Drill with a 15-foot working width, part number 1590, sourced from Deere & Company or an equivalent product that fully complies with the required technical specifications. This is a commercial off-the-shelf item intended for agricultural use under a subcontract arrangement, with no specific set-aside requirements. The equipment must meet all performance, durability, and operational criteria outlined in the technical documentation to ensure suitability for no-till farming operations. The solicitation was posted on July 28, 2026, with a response deadline set for August 7, 2026, at 9:00 PM. The place of performance is Mandan, North Dakota, with a ZIP code of 58554. The North American Industry Classification System code is 333112, identifying the category as Farm and Garden Machinery and Equipment Manufacturing. The contracting agency is the USDA ARS AFM APD, part of the Department of Agriculture, and all bids must be submitted through the designated SAM.gov portal prior to the deadline to be considered.

POSTED

DEADLINE

Supply of New Tractor with Trade-InThe contract seeks the procurement and delivery of a new tractor with the trade-in of an existing John Deere 6430 model, requiring full compliance with commercial item standards and the submission of relevant product literature to verify specifications and qualifications. This is a subcontract under a Total Small Business Set-Aside, designated for businesses certified by the Small Business Administration, with the North American Industry Classification System code 333112 indicating focus on agricultural, construction, and mining machinery manufacturing. The opportunity is posted by the USDA Agricultural Research Service, with performance expected to take place in Florence, South Carolina, 29501, and responses must be submitted by August 7, 2026, at 9:00 p.m. Eastern Time. All vendors must meet commercial item requirements and provide complete documentation to support the technical and compliance aspects of the offering.

POSTED

DEADLINE

2420--442 - Diesel Utility Vehicles for Grounds Maintenance

Solicitation # 36C25926Q0614

The Department of Veterans Affairs through its Network Contract Office 19 is seeking small businesses to supply diesel utility vehicles for grounds maintenance operations, with the contract opportunity posted under solicitation number 36C25926Q0614. This is a total small business set aside under NAICS code 333112, exclusively available to businesses certified as small by the Small Business Administration. The solicitation was issued on July 28, 2026, with responses due by 6:00 p.m. on August 12, 2026. All vehicles must be delivered and perform duties at the designated location in Cheyenne, Wyoming, with a zip code of 82001. Procurement is being managed by the Office of Veterans Affairs located in Greenwood Village, Colorado, and all inquiries should be directed to Contracting Officer Barron Long, reachable via email at barron.long@va.gov or by phone at 303-712-5741. The solicitation is classified as a combined procurement, indicating the potential for both purchase and service elements to be included in the final award.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Solicitation # 12444126Q0043

The contract requires the delivery of three STIHL RZ 752 K professional zero-turn mowers, or equivalent models, each equipped with a carbureted engine and a 52-inch zero-turn hydrostatic mowing deck, all of which must meet specified technical requirements at the time of delivery. The U.S. Department of Agriculture mandates that all items be delivered within 30 days of contract acceptance, though early delivery is permitted. The mowers are to be shipped to the USDA Forest Service, Croatan Ranger District at 141 E. Fisher Avenue, New Bern, North Carolina, 28560. This solicitation, identified as 12444126Q0043 and posted on July 28, 2026, is a Small Business Set Aside with a response deadline of August 5, 2026, and falls under NAICS code 333112 for agricultural machinery manufacturing. The contracting office is part of the Department of Agriculture’s Csa East 3 Usda-Fs, headquartered in Atlanta, Georgia, with Thomas Wolterman listed as the primary point of contact reachable via email at thomas.wolterman@usda.gov. The place of performance is strictly in North Carolina, and the contract is exclusively available to small business concerns as defined by the Small Business Administration.

POSTED

DEADLINE

Tractor with trade-in of a John Deere 6430

Solicitation # 1232SA26Q1007

This solicitation seeks quotations for the procurement of a tractor with the trade-in of a John Deere 6430, issued as a combined synopsis and solicitation under FAR Part 12 for commercial items. The requirement is exclusively reserved for small businesses as a Total Small Business Set-Aside, with the NAICS code 333112 and a size standard of 1,500 employees. All responsible sources may submit responses, but only electronic submissions via email to lynn.hults@usda.gov are accepted, with no fax or hard copies permitted. Quotes must be submitted no later than 4:00 pm Central Standard Time on Friday, July 31, 2026, and must include detailed technical specifications demonstrating the vendor’s ability to meet the required conditions, not merely restate the description. Vendors must be actively registered in SAM.gov at the time of submission and award, and payments will be processed through the Department of the Treasury’s IPP.gov platform. The opportunity is managed by the USDA ARS AFM APD office located in Beltsville, Maryland, with performance to take place in Florence, South Carolina, 29501. Questions must be submitted by 3:00 pm Central Standard Time on Tuesday, July 28, 2026. The point of contact is Lynn Hults, reachable by phone or email. This solicitation does not trigger a separate written document, and the announcement itself serves as the complete solicitation. Failure to provide comprehensive specifications that establish capability beyond a generic offer will result in disqualification. The system requires full compliance with federal electronic submission and registration mandates to ensure eligibility for award.

POSTED

DEADLINE

31 FSS CENTRAL WAREHOUSE MOWER

Solicitation # FA568226QA055

The United States Air Force is seeking to procure a John Deere 1580 Terrain Cut Front Mower or an equal alternative through a Firm Fixed Price Purchase Order under solicitation FA568226QA055, issued by the 31 FSS Central Warehouse. The solicitation, posted on July 27, 2026, requires responses by August 11, 2026, at 2:00 PM EST, with no set aside specified. The contract is managed by the Department of Defense under NAICS code 333112 for tractor and farm machinery manufacturing, and the award will be made to a single vendor. The ordering activity is located at APO AE 09604-6102, with performance expected at FPO, Armed Forces - Europe. Point of contact for inquiries is Elysia King, reachable by phone or email, with Ali Elyousfi available as a secondary point of contact. This procurement supports operational maintenance needs at a military installation in Europe, emphasizing the requirement for a durable, terrain-ready mower system.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Compact Tractor Supply and DeliveryThe contract requires the supply and delivery of one new Ventrac 4520N articulating compact tractor with all factory-installed accessories, fully assembled and ready for immediate operational use at the VA Medical Center in Asheville, North Carolina, 28805. The equipment is intended for landscape maintenance and snow removal tasks critical to facility operations. The tractor must meet all manufacturer specifications and be delivered in fully functional condition without requiring additional assembly or installation by the recipient. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the NAICS code 333112, which covers tractor manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, and it is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the 246-NETWORK Contracting Office 6. Delivery must be completed to the specified location in Asheville, and no alternate locations or partial deliveries are permitted.

246-NETWORK Contracting Office 6 (36C246)

POSTED

9 days ago

DEADLINE

in 5 days

AI Contract Overview

The City of Sault Ste. Marie is seeking bids for the supply and delivery of one detachable loader-mounted snowblower, with all duties and applicable taxes included, to be delivered F.O.B. at the City Works Centre located at 128 Sackville Road. The solicitation, identified as BT-2026PWE-PWT-21-T, was posted on May 22, 2026, and bids must be submitted by midnight on May 23, 2026. The contract is managed by Kristine Thomas, the Contracting Authority, who can be reached via email at k.thomas@cityssm.on.ca or by phone at 1111111111. Although the document references the Government of Canada as the agency name, the procuring entity is clearly the Corporation of the City of Sault Ste. Marie, and the delivery location is within the city’s municipal operations facility. All proposals must meet the specified requirements for the equipment, with no exceptions indicated for set-asides or preferences.

General Info

City of Sault Ste. Marie seeks bid for one snowblower, delivery by May 23, 2026, F.O.B. City Works Centre.

Agency

Government of Canada → City Of Sault Ste. MarieView Agency

NAICS

333112 - Lawn and Garden Tractor and Home Lawn and Garden Equipment ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 22

Solicitation

Response DeadlineMay 23

Deadline has passed

Submission Closed

05/23/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → City Of Sault Ste. Marie

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → City Of Sault Ste. Marie

View Agency Profile

Office AddressN/A

Contacts

Kristine ThomasContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

The Corporation of the City of Sault Ste. Marie (the City) invites tenders for the Supply and Delivery of goods described as:One (1) Detachable Loader Mounted Snowblower, all duty and applicable taxes included, F.O.B., City Works Centre, 128 Sackville Road, Sault Ste. Marie, Ontario