Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply and Delivery of 2-Post Vehicle Lifts (4 Units)

Active

State & Local

Response Deadline09/02/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, delivery, and site preparation for installation of four 2-post vehicle lifts, each with a 10,000 lb capacity, all of which must fully comply with ALI/ANSI safety and performance standards. The lifts are intended for use within instructional programs under the New York agency, and the successful vendor must ensure that each unit is properly packaged, transported, and ready for immediate installation upon arrival. The equipment must meet rigorous industry certifications to guarantee operational safety and reliability in an educational environment. Submission of bids is due by September 2, 2026, with the solicitation originally posted on August 9, 2026. This is classified as a subcontract under NAICS code 333999, which encompasses other miscellaneous manufacturing, indicating the lifts are custom or specialized equipment rather than standard off-the-shelf products. The place of performance and point of contact details are not specified, suggesting the end location may be determined or coordinated after award. The procurement is managed through an online platform linked to the Instructional Programs organization, and no set-aside provisions are indicated, meaning any qualified vendor may respond.

General Info

Procure and deliver four 10,000 lb ALI/ANSI-certified vehicle lifts for New York instructional programs by September 2, 2026.

Agency

New York → Instructional ProgramsView Agency

NAICS

333999 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

NY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineSep 2

Submission deadline

Response Deadline

09/02/2026, 03:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew York → Instructional Programs

ContactsNo contacts available

OfficeN/A

Organization / Agency

New York → Instructional Programs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, deliver, and prepare for installation four 10,000 lb capacity 2-post vehicle lifts compliant with ALI/ANSI standards.

Similar Contracts

Same NAICS industry code

Supply of Hazardous Material-Containing Equipment (Non-Commercial)The contract entails the supply of 28 units of industrial equipment that contain hazardous materials, requiring full compliance with OSHA regulations as well as MIL-STD packaging and labeling standards to ensure safe handling, transport, and use. This is a non-commercial subcontract issued under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 333999 applies, indicating the equipment falls under other industrial machinery manufacturing. Performance of the contract is specified to occur in San Diego, California, with the zip code 92136-3581 as the designated place of performance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense under the San Diego agency. All proposals must adhere strictly to federal standards for hazardous material containment and documentation to meet military and occupational safety requirements.

POSTED

about 12 hours ago

DEADLINE

Supply of Gear Jacking Devices with Military ComplianceThe contract requires the supply and delivery of two gear-type jacking devices that must fully comply with military specifications, ensuring they meet all required performance, safety, and durability standards for defense applications. The scope includes comprehensive packaging, preservation, and marking procedures to safeguard the equipment during transit and storage, along with strict adherence to hazardous materials restrictions to ensure regulatory compliance and operational safety. The devices are to be delivered to the specified place of performance in New Cumberland, Pennsylvania, under the oversight of the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. All proposals must be submitted by the response deadline of August 17, 2026, and the solicitation is categorized as a subcontract under the NAICS code 333999, which covers other miscellaneous manufacturing. There is no designated set-aside type, meaning the opportunity is open to all qualified vendors without preference based on business size or ownership status. The contract opportunity is publicly accessible through the DIBBS platform, and vendors must ensure full alignment with military requirements and logistics protocols prior to submission.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of OVIVO C30HT Drive UnitThe City of Richland is seeking the supply of a new OVIVO C30HT Drive Unit under a subcontract arrangement, with the requirement that delivery, handling, and warranty support be provided either directly by the original equipment manufacturer or through an authorized distributor. The contract encompasses all logistics related to the procurement and installation readiness of the unit, ensuring full operational compliance and technical support post-delivery. The solicitation is open for responses until August 25, 2026, with submissions required by 9:00 PM Pacific Time, and the NAICS code 333999 indicates it falls under miscellaneous manufacturing. The contract is not subject to any specific set-aside provisions, and while no point of contact or detailed location information is provided, the performance is expected to occur within the jurisdiction of the City of Richland in Washington state.

City of Richland

POSTED

about 15 hours ago

DEADLINE

Supply and Delivery of 4-Post Vehicle Lift (1 Unit)The contract requires the procurement, delivery, and installation preparation of a single 4-post vehicle lift with a 14,000-pound capacity, fully compliant with ALI and ANSI safety and performance standards. The equipment must be sourced, transported, and readied for proper installation at the designated location under the jurisdiction of Instructional Programs in New York. All deliverables must meet the technical and regulatory requirements for industrial vehicle lifting equipment, ensuring operational safety and long-term reliability in a professional automotive or instructional environment. The bidder must ensure full compliance with applicable codes and be prepared to document adherence to these standards upon delivery. The solicitation was posted on August 9, 2026, with a mandatory response deadline of September 2, 2026, at 3:00 PM. This is classified as a subcontract under NAICS code 333999, which covers other general-purpose machinery manufacturing. There is no set-aside designation specified, and no point of contact details are provided. The place of performance and organization details remain unspecified, but the project is tied to the New York instructional programs. The full details and submission portal can be accessed through the provided online link.

Instructional Programs

POSTED

about 17 hours ago

DEADLINE

Portable Cable ReelsThe contract calls for the supply of durable and portable cable reels specifically engineered for the field deployment and management of 300-foot coaxial cables, ensuring reliability and ease of use in demanding operational environments. These reels must meet stringent standards for robustness, portability, and functionality to support military and defense-related communications needs in varied field conditions. The solicitation is classified as a subcontract under the NAICS code 333999, indicating it pertains to other miscellaneous manufacturing, and is issued by the Department of Defense through the office FA4427 60 Cons Lgc. Performance is required at a location with a ZIP code of 94535, suggesting the operational focus is on the West Coast of the United States. The deadline for responses is set for August 14, 2026, at 11:30 p.m. Eastern Time, with the solicitation posted on August 7, 2026, providing a seven-day window for submissions. The contract does not specify a set-aside type, meaning it is open to all eligible bidders regardless of business size or ownership characteristics. The absence of a designated point of contact and specific office address details implies that all inquiries and submissions should be handled through the official SAM.gov portal linked in the solicitation, which serves as the primary platform for communication and documentation related to this procurement opportunity.

FA4427 60 Cons Lgc

POSTED

DEADLINE

Supply of General Service Toolkit for UR5/e-seriesThe contract calls for the procurement of a general service toolkit specifically designed for use with UR5 and e-series robotic arms, intended to support maintenance, calibration, and operational needs in a robotic automation environment. This subcontract is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance expected to take place in Hampton, Virginia, at the ZIP code 23681. The solicitation was posted on August 7, 2026, and responses are due by August 11, 2026, giving potential vendors a four-day window to submit proposals. The North American Industry Classification System code for this procurement is 333999, which covers other industrial machinery manufacturing, indicating the specialized nature of the toolkit as a custom or non-standard component. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference given to small businesses or other categories. The contract details do not include a point of contact, and the official viewing link is available through SAM.gov for more information. The toolkit must meet the technical requirements for compatibility with the specified robotic series to ensure seamless integration and serviceability in NASA’s operational systems.

NASA Shared Services Center

POSTED

DEADLINE

Hoist System and Tarp Assembly Supply/InstallationThe contract calls for the supply and optional installation of hydraulic hoist systems and tarp assemblies designed for dump bodies, requiring full mechanical integration and thorough performance testing to ensure operational reliability. The work must meet specified technical standards for functionality, durability, and compatibility with existing equipment, with the contractor responsible for all components, installation labor, and verification that the systems perform as intended under real-world conditions. This subcontract, issued by the State Fiscal Accountability Authority of South Carolina, is categorized under NAICS code 333999 and is open for bids until September 21, 2026. While the exact location of performance is not specified, the work is tied to state-level procurement requirements and will likely serve public fleet operations. Interested parties must submit proposals by the deadline, and the contract does not indicate a specific set-aside status, meaning it is open to general competition without reserved categories for small or disadvantaged businesses.

State Fiscal Accountability Authority

POSTED

DEADLINE

in about 1 month

Hydraulic Service Crane Supply and IntegrationThe City of Perry is seeking a subcontractor to supply and integrate a hydraulic service crane with a 53,100 ft-lb rating and an 8,600 lb lifting capacity, equipped with the CDTpro™ control system featuring a range finder. The crane must meet specified performance standards and be fully integrated to ensure seamless operation within the intended application. The solicitation, posted on August 6, 2026, requires responses by August 20, 2026, and is classified under NAICS code 333999 for other miscellaneous manufacturing. The place of performance and exact delivery location are not specified, but all work is expected to be completed under the oversight of the Georgia-based agency. Interested parties must submit proposals through the provided online portal by the stated deadline to be considered for award.

POSTED

DEADLINE

Hydraulic Mast and Display Raising/Lowering MechanismThe contract seeks the supply and integration of an electric hydraulic cylinder mast capable of raising and lowering a message display with a rated load capacity of 2,000 pounds, designed to operate reliably under extreme environmental conditions. The system must be engineered for durability and consistent performance in harsh weather, ensuring uninterrupted operation regardless of temperature, moisture, or other outdoor stressors. Integration of the mast with the display unit is a critical requirement, necessitating precise mechanical and electrical compatibility to enable smooth, controlled vertical movement. The contract is classified as a subcontract under NAICS code 333999, with a response deadline of September 9, 2026, and was posted on August 6, 2026. The procuring entity is the Washington County Board of Commissioners in Georgia, though specific location details for performance or contact are not provided. The solicitation does not include a set-aside designation, meaning it is open to all eligible contractors without restrictions based on business size or status. The technical scope requires proven capability in heavy-duty hydraulic systems and outdoor electronic integration, with deliverables focused on reliability, safety, and long-term resilience in uncontrolled environmental settings.

Washington County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Supply of Automatic Door OperatorsThe contract calls for the supply of automatic door opening systems designed to meet ADA compliance standards and enhance accessibility in high-traffic areas within Saint Mary’s County Public Schools facilities. The systems must include integrated safety sensors and fail-safe mechanisms to ensure reliable operation and user safety, particularly in environments with frequent foot traffic. Equipment must be durable, low-maintenance, and suitable for institutional use, with installation and testing to align with local accessibility regulations and school operational needs. This is a subcontract opportunity posted on August 6, 2026, with a response deadline of August 27, 2026, under NAICS code 333999 for other commercial and industrial machinery and equipment manufacturing. The work is to be performed within school locations under the jurisdiction of Saint Mary’s County Public Schools in Maryland, though specific installation sites are not detailed. Bidders must demonstrate technical capability to deliver, install, and commission systems that meet stringent safety and accessibility requirements, with no set-aside provisions indicated. All proposals must be submitted through the state’s procurement portal prior to the deadline.

Saint Mary's County Public Schools

POSTED

DEADLINE

Supplier of Warranty-Backed Equipment for Government UseThe contract is for the supply of critical equipment including security systems, medical devices, HVAC units, and kitchen appliances, all provided with extended warranty coverage to ensure long-term reliability and reduced operational downtime. All items must strictly meet the technical and compliance standards set by the Texas Department of Criminal Justice, reflecting their stringent requirements for safety, durability, and operational suitability within correctional and institutional environments. The equipment is intended for use in facilities under the agency’s jurisdiction and must be delivered and installed in compliance with their specific protocols. The contract is classified as a subcontract with a solicitation posted on August 6, 2026, and responses due by August 21, 2026. It falls under the NAICS code 333999 for other commercial and industrial machinery and equipment manufacturing, indicating a broad scope of equipment sourcing. Participation is open to suppliers capable of meeting the Texas Department of Criminal Justice’s criteria without a designated set-aside classification. All deliveries and performance must occur within the state of Texas, and potential vendors are expected to demonstrate proven capacity to provide fully warrantied, compliant, and serviced equipment consistent with government procurement expectations. Information and participation details are accessible through the Texas SmartBuy portal.

Texas Department of Criminal Justice

POSTED

DEADLINE

Spray System Components Supply

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from New York → Instructional Programs

Same awarding agency

Relocation of Existing Vehicle LiftsThe contract requires the complete disassembly, secure transportation, and reassembly of existing vehicle lifts at an undisclosed location in New York, with all work performed on-site. The contractor must ensure that each lift is properly reinstalled, anchored according to safety standards, and subjected to full operational testing to verify functionality and compliance. Additionally, the lifts must be re-certified following reassembly to meet applicable regulatory and safety requirements, ensuring they are fully operational and safe for use upon handover. All phases of the project, from removal to final certification, must be executed with precision to avoid damage and minimize downtime. The solicitation is classified as a subcontract under NAICS code 238990, indicating specialized construction services, and is managed by the Instructional Programs agency under the New York office. The proposal deadline is September 2, 2026, and while the exact site location has not been specified, performance is expected to occur within the state. No set-aside provisions or organizational type restrictions are indicated, and the opportunity is open to qualified subcontractors with demonstrated expertise in lift relocation and certification. The project necessitates a thorough understanding of equipment handling, safety protocols, and regulatory compliance for industrial lifting systems.

All Other Specialty Trade Contractors

POSTED

about 17 hours ago

DEADLINE

Annual Maintenance and Parts Service for 4-Post LiftThe contract pertains to annual maintenance, inspection, repair, and parts supply for a single 4-post lift, ensuring ongoing operational reliability and safety compliance. All services must be performed in accordance with required standards and accompanied by comprehensive documentation confirming adherence to regulations and service history. The work is classified under NAICS code 811490, indicating it falls within other personal and household goods repair and maintenance, and is structured as a subcontract within the Instructional Programs agency based in New York. Services are expected to be delivered in alignment with the performance requirements specified for the lift’s intended use, with all repairs and part replacements sourced to meet or exceed original equipment specifications. The solicitation was posted on August 9, 2026, with a firm deadline for responses set for September 2, 2026, at 3:00 PM. Although no specific location details or point of contact are provided, the contract is accessible via the public procurement portal at the linked URL.

Other Personal and Household Goods Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Annual Maintenance and Parts Service for 2-Post LiftsThe contract requires the provision of comprehensive annual maintenance, inspections, repairs, and parts supply for four 2-post lifts, ensuring consistent operational reliability and safety. The scope includes thorough recordkeeping and regular reporting to document all service activities, parts replaced, and inspection outcomes. This service is classified under NAICS code 811490, indicating it falls within other commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract with no specific set-aside designation and is managed by Instructional Programs under the New York agency. All work must be performed at the designated location within New York, as indicated by the place of performance, though exact city or zip details are not specified. The solicitation was posted on August 9, 2026, with a response deadline of September 2, 2026, at 3:00 PM, requiring interested parties to submit proposals within this timeframe to be considered.

Other Personal and Household Goods Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Installation, Testing, and Training for All New LiftsThe contract encompasses the on-site installation, anchoring, calibration, testing, and operator training for five new vehicle lifts to be performed under a subcontract for Instructional Programs based in New York. All work must be completed at the designated location, though specific city or zip details are not provided, and the services are classified under NAICS code 238220, indicating construction related to building equipment installation. The solicitation was posted on August 9, 2026, with a firm deadline for responses set for September 2, 2026, at 3:00 PM, requiring timely submission to be considered. The scope emphasizes full turnkey delivery, including not just physical installation but also precision calibration and safety-compliant testing, alongside hands-on training to ensure operators are fully qualified to use the equipment. The contract is structured as a subcontract, meaning the respondent is expected to fulfill obligations under a larger procurement framework managed by the agency. There is no set-aside classification specified, and the point of contact information is not listed in the provided data.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

Rotary Lift Equipment and Service Bid

Solicitation # IP-19-E-27

Broome-Tioga BOCES is seeking bids to procure and install multiple vehicle lifts, specifically four guaranteed 2-post lifts and one 4-post lift, as detailed in Section 5 of the solicitation, along with arranging for the transport and reinstallation of one or more existing lifts within the same campus location at 435 Glenwood Road, Binghamton, NY. The solicitation aims to formalize an ongoing relationship with an awardee who will not only supply and install the new lifts but also provide future maintenance and repair services for all acquired equipment. The equipment must be comparable in brand and type to the existing lifts being relocated, ensuring consistency in operation and serviceability. All work must occur on-site at the specified Binghamton location, and the bid response deadline is September 2, 2026. The solicitation is issued under IP-19-E-27 by the Instructional Programs division of New York State, with Richard Cook as the primary point of contact for purchasing inquiries and the Contracts Department handling administrative communications.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE