Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply and Delivery of Support Assembly, MO (NSN: 1680-01-018-0959)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, packaging, and delivery of a Support Assembly, MO with the National Stock Number 1680-01-018-0959, fully compliant with military logistics and marking standards. This assembly must be produced to exact specifications and prepared for shipment to a government-designated location, ensuring adherence to all defense supply chain protocols. The work is classified as a subcontract under NAICS code 336412, indicating it falls within the aerospace product and parts manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 24, 2026, and the performance location remains unspecified, though delivery must meet official military requirements. No set-aside provisions are designated, meaning the contract is open to qualified contractors without restricted eligibility. Failure to meet packaging, labeling, or delivery timelines could result in non-compliance penalties. All work must align with DLA’s expectations for quality, traceability, and documentation to support military operational readiness.

General Info

Manufacture and deliver military-grade Support Assembly per DLA specs, compliant with defense logistics standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-24-T-9766.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPPORT ASSEMBLY, MO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 24

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, package, and deliver a Support Assembly, MO (NSN: 1680010180959) in compliance with military logistics and marking standards to a government-designated location.

Similar Contracts

Same NAICS industry code

TURBO SUPERCHARGER / NSN 2950-01-714-4392 / JOINT LIGHT TACTICAL VEHICLE

Solicitation # SPE4A727R0102

POSTED

about 4 hours ago

DEADLINE

SHROUD SEGMENT,TURB

Solicitation # SPRPA127QXA54

Solicitation SPRPA1-27-Q-XA54 is a fixed-price request for the procurement of 91 units of Shroud Segment, Turb (NSN 2840-01-700-3955), designated as a critical application item. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, with Sean Geiger serving as the primary point of contact. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability requires compliance with ISO 9001 or a higher quality management system. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073 and MIL-STD-129, with inspection and acceptance occurring at the origin. Shipping is FOB Destination, and all payment processing must be conducted through the Wide Area WorkFlow (WAWF) system using combined invoice and receiving reports. Key regulatory requirements include the Buy American and Balance of Payments Program, the safeguarding of covered defense information per DFARS 252.204-7012, and a one-year warranty for non-complex supplies. Offerors must be registered in the System for Award Management and provide detailed pricing and commercial status documentation with their proposals.

Pa DLA Aviation At Philadelphia

POSTED

about 4 hours ago

DEADLINE

GUARD,GASOLINE ENGI

Solicitation # N0038327QTA11

Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

TURBOSUPERCHARGER,E

Solicitation # SPRMM127QMA08

Solicitation SPRMM127QMA08, issued by the DLA Weapons Support Mechanicsburg and NAVSUP Weapon System Support, seeks the manufacture and delivery of one Turbosupercharger, E (NIIN 013298504). The award will be granted to the responsible offeror providing the lowest price technically acceptable offer, evaluated based on technical compliance, price, and supplier risk via the Supplier Performance Risk System. Offerors must provide a 60-day quote validity and identify the Original Equipment Manufacturer if they are a distributor. The item must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 or ASTM D3951-18 depending on the destination. The contract requires electronic submittal of invoices and receiving reports through PIEE-WAWF. Inspection and final acceptance will occur at the origin, specifically at the contractor or subcontractor plant. Key regulatory requirements include compliance with the Buy American Act, cybersecurity maturity model certification, and ISPM 15 for wood packaging. Any changes in design or part numbers require government approval and supporting documentation. The item is destined for the USNS SUPPLY T AOE 6, and all contractual communications and documents are handled electronically via email, facsimile, or the PIEE-EDA web tool.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

in about 1 month

FRAME,TURBINE,AIRCR

Solicitation # SPRPA127QXA28

Solicitation SPRPA1-27-Q-XA28 is a fixed-price request for the procurement of three aircraft turbine frames, identified by NSN 0RH 2840-01-699-6916. Issued by the Department of Defense through the Pa DLA Aviation office in Philadelphia, the requirement is designated as a critical application item and is issued under EAF authority. The delivery timeline is set for 90 days with FOB Destination terms. Inspection and acceptance will occur at the origin, and the contractor must adhere to ISO 9001 or higher quality management standards. The government intends to make a single award based on a best-value determination where past performance is considered more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Item Unique Identification (IUID) and hazardous materials compliance. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system. The solicitation also includes strict adherence to Buy American policies and various security prohibitions, including those related to Chinese military companies.

Pa DLA Aviation At Philadelphia

POSTED

about 4 hours ago

DEADLINE

Supply of Aircraft Valve (NSN 2840-01-666-6866)

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

Supply of Combustion Liners (NSN 2840-01-709-1523)

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

Supply of Vane Assembly, Compressor (NSN 2840-01-714-0446)

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

Turbine Engine Blade Supplier (NSN 2835-01-4575652)

SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

VALVE — 2840016666866 — SPRPA127QXA60

Solicitation # SPRPA127QXA60

Solicitation SPRPA127QXA60, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of 35 units of a valve (NSN 2840-01-666-6866). This item is designated as a Critical Safety Item (CSI), requiring strict adherence to quality standards, including ISO9001 compliance. The delivery is required within 90 days, with inspection and acceptance occurring at the origin. The procurement is governed by NAICS code 336412 and follows FOB Destination terms. The award process prioritizes past performance over price, utilizing the DoD Supplier Performance Risk System (SPRS) for color-coded ratings. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipments and the use of approved pallets and barrier materials. The contract incorporates several key FAR and DFARS clauses, including those for hazardous material identification, the Buy American Program, and cybersecurity safeguarding of defense information. Quotations must be submitted by November 16, 2026, and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

NOZZLE ASSEMBLY,TUR — 2840017143231 — SPRPA127QXA59

Solicitation # SPRPA127QXA59

Solicitation SPRPA127QXA59, issued by the Department of the Navy via DLA Aviation at Philadelphia, is a request for the procurement of 72 units of Nozzle Assembly, TUR (NSN 2840-01-714-3231). This item is designated as a Critical Safety Item (CSI), requiring strict adherence to ISO 9001 and SAE AS9100 quality management standards. The government intends to make a single award based on a best-value determination, prioritizing past performance as the primary evaluation factor over price. Offerors must provide relevant past performance history or a statement of no history to remain eligible for award. The contract mandates rigorous packaging and marking standards, including compliance with MIL-STD-2073 for preservation and MIL-STD-129 for marking. Specific requirements include Item Unique Identification (IUID) per MIL-STD-130 and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Inspection and acceptance will occur at the origin. Key regulatory clauses are incorporated, including the Buy American Act, Trade Agreements, and safeguarding of covered defense information. No drawings are available for this solicitation, and the procurement is not set aside for small businesses.

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

VANE ASSEMBLY,COMPR — 2840017140446 — SPRPA127QXA56

Solicitation # SPRPA127QXA56

This solicitation, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of 117 units of Vane Assembly, Compr (NSN 2840-01-714-0446). The procurement is conducted under Emergency Acquisition Flexibilities authority and designates the items as Critical Safety Items, requiring compliance with ISO9001 quality standards. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System, and offerors without a relevant history will receive a neutral rating. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labeling and hazardous material identification. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 336412 and incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and priority ratings for national defense.

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Concession Services – Tracy, CA

Solicitation # NAFUA1-26-R-0003

The Defense Logistics Agency is soliciting proposals under solicitation NAFUA1-26-R-0003 for cafeteria and mobile food truck services at the Defense Distribution Depot San Joaquin in Tracy, California. This is a revenue-generating concessionaire contract where the contractor provides all labor, management, and equipment to operate two cafeterias in Building 100 and Building 16, a mobile food truck, and general catering services for over 1,200 personnel. In exchange for operating these facilities, the contractor will pay the Nonappropriated Fund Instrumentality either a monthly concessionaire fee or a percentage of gross sales, whichever is greater. The period of performance consists of a two-year base period from December 30, 2026, to December 29, 2028, with eight subsequent one-year option periods. Proposals are due by November 2, 2026, at 3:00 PM EST and must be submitted in two separate volumes covering commission percentages, financial capabilities, and operational plans. Award selection is based on the best overall value, with primary emphasis placed on the feasibility of the business plan, relevant past performance, and menu innovation. Contractors must adhere to strict food safety and packaging standards, including compliance with Tri-Service Food Code and Army Regulations, and ensure all food handlers are inoculated against Hepatitis A. Eligible offerors must maintain active registration in the System for Award Management and provide a unique entity identifier.

Food Service Contractors

POSTED

about 4 hours ago

DEADLINE

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Identification Marker SupplierThis subcontract involves the supply of seven identification markers, NSN 7690-01-693-4155, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected supplier is responsible for the fabrication and assembly of these markers in strict accordance with TDP Rev A Gen 1 and REFERENCE QAP 13873. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-2073-1E along with RP001 DLA Packaging Requirements for packaging. Additionally, the provider must provide valid manufacturer and distributor codes to fulfill the requirements of this Department of Defense procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 23 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 23 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Pneumatic Aircraft Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Blank Panel Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Component Supply & Distribution

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Interior Trim Component Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Tire Supply (Pneumatic, NSN 2620016566096)

Defense Logistics Agency

POSTED

DEADLINE

C-130 Aircraft Component Repair and Overhaul

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Tire Supply (Pneumatic, NSN 2620009461108)

Defense Logistics Agency

POSTED

DEADLINE

Pneumatic Aircraft Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Pneumatic Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Tire Supply (Pneumatic, NSN 2620011634647)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Critical Aircraft Component (KHB2016003-10)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Aircraft Tire Supply (NSN 2620014646078)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS