This Solicitation opportunity from Government of Canada was posted on December 23, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply and Installation of Meeting Pods at the Career Centre office

Closed

BC2025010493International

Submission Closed01/28/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 337215

New

Federal

Custom Test Cabinet FabricationA custom military-spec test cabinet is being procured under a small business set-aside subcontract for precision fabrication, design, and delivery to meet rigorous defense standards. The work is assigned to CLIN 0001 and requires adherence to exacting military specifications, with manufacturing performed to ensure durability, functionality, and compliance in operational environments. The contract is managed by NSWC Crane under the Department of Defense, with performance taking place in Crane, Indiana, 47522. The solicitation, posted on July 24, 2026, has a response deadline of August 5, 2026, and is restricted exclusively to small businesses as defined by the Small Business Administration under FAR 19.5, with a NAICS code of 337215 indicating classification within the furniture and fixture manufacturing sector.

POSTED

DEADLINE

CUSTOM TEST CABINETThe U.S. Navy’s Naval Surface Warfare Center Crane is soliciting bids for a custom test cabinet under a 100% small business set-aside contract with solicitation number N0016426Q0269, issued under FAR Part 12 as a commercial acquisition. The requirement, classified under NAICS code 337215 and FSC/PSC 7125, mandates a firm fixed price proposal from properly registered small businesses in the System for Award Management, with all offers due by August 5, 2026, at 4:00 PM Eastern Time. Proposals must be submitted via email to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil and must fully comply with the specified salient characteristics. Interested vendors are required to regularly monitor sam.gov for any amendments or updates prior to the deadline, as changes issued after the closing date will only be shared with respondents who have already submitted a quote. The place of performance is located in Crane, Indiana, and the contract is managed by the Department of Defense through the NSWC Crane office.

POSTED

DEADLINE

Casework and Millwork Fabrication/InstallationThe contract pertains to the custom fabrication and installation of built-in cabinetry, reception desks, storage units, and decorative millwork, all classified under NAICS code 337215 for millwork fabrication. It is structured as a subcontract opportunity posted by the state of Utah, with a response deadline of August 5, 2026, at 4:00 PM. The work must be performed locally within Utah, though the exact city or zip code is unspecified, and all materials and labor must meet custom specifications aligned with project requirements. The bid must be submitted through the designated online platform by the stated deadline, with no set-aside provisions or specific organization type restrictions indicated. No point of contact details are provided, so inquiries should be directed via the posted UI link.

POSTED

DEADLINE

RACK, STORAGE, SMALL ARMThe contract specifies the procurement of storage racks designed for small arms, governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging specifications. All items must comply with DLA packaging guidelines including MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging materials, with palletization strictly adhering to RP001 requirements. The items are classified as Category I munitions under DODM 4160.28-Vol.3, requiring demilitarization procedures upon disposition, and any non-accepted supplies must have government identification removed. The contract references numerous technical data packages tied to specific drawing numbers with revision dates as of May 7, 2024, and includes one non-government standard, NAS9301. The unit of issue is each, with a quantity of 15 units priced at $15.00 each, totaling $225.00, though the quantity is estimated and not guaranteed. Delivery is scheduled for 107 days after award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The contract is issued under solicitation SPE7LX-26-U-9008 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and falls under NAICS code 337215 for manufacturing related to metalworking machinery.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoardThe District of Columbia’s Behavioral Health agency is forecasting a procurement for new storage racks, hand trucks, and additional kitchen equipment necessary for operational needs. This anticipated contract, listed under the title FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoard, is scheduled for release in fiscal year 2026 with a posted date of July 23, 2026, and is currently in the forecast phase without a solicitation number or set-aside details. The equipment will support kitchen infrastructure and material handling within agency facilities, though the exact locations of performance and specific requirements are not yet defined. No point of contact information is provided at this stage, and the contract opportunity is accessible via the District’s public procurement portal for future reference.

Behavioral Health (DBH)

POSTED

DEADLINE

Modular Reader Rail ProductionThe contract calls for the manufacture of tilt-adjustable modular reader rails in two standard widths—45 inches and 60 inches—constructed with solid birch legs and Baltic birch plywood to ensure durability and aesthetic quality. The production must meet precise structural and functional requirements to support adjustable positioning, likely for use in controlled or specialized environments. All materials and assembly processes are expected to align with high-grade craftsmanship standards suitable for government applications. This subcontract, issued by the Defense Threat Reduction Agency under the Department of Defense, is classified under NAICS code 337215 for manufacturing furniture and related products. The solicitation was posted on July 23, 2026, with responses due by July 29, 2026. Performance of the work is designated to take place in Albuquerque, though no specific address is provided. The contract does not specify any set-aside provisions, and there is no designated point of contact listed, implying that proposals must be submitted via the provided SAM.gov portal without direct preliminary communication.

Defense Threat Reduction Agency

POSTED

DEADLINE

Archival/Museum Display CasesThe Defense Threat Reduction Agency is seeking information from potential vendors capable of providing archival and museum display cases as outlined in a draft specifications sheet, with no intent to award a contract based on this announcement. This sources sought notice is purely informational and does not constitute a solicitation, offer, or binding commitment from the government; responses are voluntary, non-binding, and will not be reimbursed or returned. Interested companies must submit a response no longer than eight pages that includes their name, point of contact with phone and email, CAGE code and UEI number, business size classification under NAICS 337215 (with a small business threshold of 500 employees), a capabilities statement demonstrating relevant experience, a list of past or current contracts of similar scope and complexity, and any applicable IDIQ contracts supporting this NAICS code. Responses must be emailed to Erika Hebert by the deadline of July 29, 2026, with the subject line “Sources Sought # HDTRA126Q0028”. All communication regarding this notice must be conducted in writing through the designated point of contact. The requirement pertains to display cases for use in Albuquerque, New Mexico, and while no set-aside is currently planned, any future formal solicitation will be posted on the Government-wide Point of Entry, which potential offerors must monitor independently. Participation in this sources sought does not guarantee or preclude future bids, and no funds are available to cover the cost of preparing responses.

Defense Threat Reduction Agency

POSTED

DEADLINE

10--RACK,STORAGE,SMALL ARMThe U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for 15 units of NSN 1095016121508, RACK, STORAGE, SMALL ARM, under solicitation SPE7LX26U9008. This procurement is part of a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated four orders annually and a guaranteed minimum of two units. Items will be delivered to multiple CONUS and OCONUS DLA depots via consolidation and containerization points. All quotes must be submitted electronically by the deadline of August 7, 2026, with no hard copies available. The solicitation is open to all responsible sources and is posted exclusively online via the SAM.gov link, where digitized drawings and military specifications can also be retrieved. The point of contact for inquiries is listed as DibbsBSM@dla.mil, with further details accessible through the DIBBS website using the solicitation number. The NAICS code is 337215, and the office is based in Columbus, Ohio.

DLA Land And Maritime

POSTED

DEADLINE

LOCKERSThe contract titled LOCKERS, solicited under number W911S226U3806, is a total small business set-aside pursuant to FAR 19.5, exclusively available to small businesses as defined by the SBA. It is classified under NAICS code 337215, which pertains to metal cabinet manufacturing, indicating the procurement involves the supply of lockers likely for military or federal use. The opportunity was posted on July 23, 2026, with a firm deadline for responses set for July 30, 2026, at 11:00 PM Eastern Time. The contracting activity originates from the Department of Defense, specifically the W6QM Micc-Ft Drum office located at Fort Drum, New York, however the place of performance is listed with a zip code of 98433, suggesting delivery or service may occur at a different location, possibly within the Pacific Northwest. The primary point of contact is Cody Crawford, reachable via email at cody.j.crawford16.mil@army.mil or by phone at 765-546-9296, who serves as the sole liaison for inquiries and submissions related to this solicitation.

POSTED

DEADLINE

AD / FURNITURE DELIVERY AND INSTALLThe contractor is required to furnish all materials, equipment, labor, and personnel to deliver, assemble, and install new furniture in Building 1318, Rooms 135, 136, 138, and 139 at Eglin Air Force Base, Florida, with work to be completed within 90 calendar days of contract award. The scope includes retrieving pre-purchased furniture from Building 1408, fully installing it per approved designs and manufacturer guidelines, repairing any damage caused during installation, removing and properly disposing of all packaging and debris, cleaning surfaces using approved methods, testing powered desks for full functionality, and submitting updated design drawings in PDF format. A final walkthrough with the Government Project Manager and Contracting Officer is mandatory to resolve punch list items before acceptance and payment. All work must comply with NFPA 70, NFPA 101, federal and Air Force regulations, and specific requirements outlined in the attached Statement of Work, drawings, and government property matrices. The solicitation is a total small business set-aside under NAICS code 337215, with offers due by July 30, 2026, and the contract type is firm-fixed-price. Contractors must obtain base identification and vehicle passes for Eglin AFB, complete a background check with a five-day lead time, and use only the Haul Road commercial gate for deliveries. Personnel must have at least three years of experience with specified design software, and an authorized representative must be physically present during all installation activities. The contractor is liable for all damage to government property, prohibited from duplicating keys, and required to maintain automated master copies of designs throughout the warranty period. Environmental controls, recycling practices, and restricted access to designated work areas are mandated, with smoking, eating, and drinking strictly prohibited in facility areas. Invoices must be submitted via Wide Area WorkFlow using specified document types, with remittance directed to the designated DoDAAC address and payments processed by the Air Force Business Processing Network. The contract has no stated monetary value at this time, as pricing details are not included in the solicitation, indicating it is a pre-funding document pending offeror submission and subsequent funding allocation. All offerors must be registered in SAM and certify as a small business under the set-aside, though actual representations and certifications are not yet submitted.

POSTED

DEADLINE

EV385-081909 PSIB Furniture Categories 3 and 4All bids for the procurement of office furniture under solicitation number WS5715686633, titled EV385-081909 PSIB Furniture Categories 3 and 4, must be submitted by August 5, 2026 at 2:00 p.m. EDT, with any submissions after this time deemed non-responsive. This tender is issued by Public Services and Procurement Canada on behalf of Indigenous Services Canada for delivery and installation to Prince Albert, Saskatchewan, with a required completion date of January 8, 2027. The opportunity is posted on SAP Ariba, part of the SAP Business Network, and there are no fees to access the tender documents or submit bids. The NAICS code for this procurement is 337215, and it is categorized as a federal solicitation with no set-aside provisions. The primary point of contact is Eddie Beddall, Contracting Authority, reachable at eddie.beddall@tpsgc-pwgsc.gc.ca. The official notice can be accessed via the CanadaBuys portal, though all submissions must follow the SAP Ariba process.

Department of Public Works and Government Services

POSTED

DEADLINE

E60HN-26CFWL - RFSO - Weapon LockersThe contract titled E60HN-26CFWL - RFSO - Weapon Lockers is a federal solicitation issued by the Government of Canada through the Department of Public Works and Government Services, with the solicitation number WS5760989938. It was posted on July 23, 2026, and requires responses to be submitted no later than August 12, 2026, at 7:00 PM Eastern Time. The procurement falls under NAICS code 337215, which relates to the manufacturing of metal furniture, indicating the requirement is for standardized weapon storage units designed to meet specific federal security and operational specifications. Performance of the contract is expected to service locations across Canada, with no specific city designated beyond the country-wide scope. Alexandra Nadeau, Contracting Authority with Public Services and Procurement Canada, is the primary point of contact for inquiries and can be reached via email at alexandra.nadeau@tpsgc-pwgsc.gc.ca. There is no set-aside provision identified for small businesses or other designated categories, and the solicitation is open to all eligible federal vendors. Additional details and documentation can be accessed through the official Canada Buys portal using the provided UI link.

Department of Public Works and Government Services

POSTED

4 days ago

DEADLINE

in 17 days

AI Contract Overview

The University of British Columbia is seeking a qualified and experienced vendor to supply and install meeting pods at the Career Centre office located in Brock Hall, Vancouver. This project is distinct from the broader Career Centre renovation, which is being tendered separately. Interested vendors must submit their proposals through UBC’s Bonfire portal by the deadline of January 28, 2026. The contract is a solicitation issued by the Government of Canada under the University of British Columbia and aims to enhance the functionality and workspace environment at the specified location. The contract, identified by solicitation number BC2025010493, was posted on December 23, 2025. The scope centers specifically on the procurement and installation of these meeting pods, ensuring they meet the needs of the Career Centre office. The primary contact for the contract is the contracting authority, reachable via the provided email address. This opportunity is open without any set-aside restrictions, inviting all capable vendors to participate. The location of performance is within UBC’s Brock Hall, underlining a federal-level engagement managed by the university.

General Info

UBC seeks vendor to supply and install meeting pods at Career Centre, Brock Hall, deadline January 28, 2026.

Agency

Government of Canada → University of British Columbia

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedDec 23

Solicitation

Response DeadlineJan 28

Deadline has passed

Submission Closed

01/28/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → University of British Columbia

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → University of British Columbia

Office AddressN/A

Contacts

Contracting Authority

contact@example.gov

Full Description

The University of British Columbia (UBC) is seeking the services of a qualified and experienced vendor for the supply and installation of meeting pods at the Career Centre office in UBC’s Brock Hall, 1874 East Mall, Vancouver, BC V6T 1Z1. The overall Career Centre renovation is being tendered separately under RFT #2025010454. Proposals must be submitted through the University of British Columbia’s Bonfire portal.https://ubc.bonfirehub.ca