Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply and Integration of IMO-Grade Gyrocompass and Altitude System

Active

Federal

Response Deadline08/19/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement, testing, and delivery of a new Pack Quadrans G2 IMO Grade Gyrocompass and Altitude System with a heading accuracy of 0.5 degrees or better, ensuring precision for maritime navigation applications. The system must include both serial and ethernet input/output capabilities for seamless integration into existing vessel infrastructure and must comply with Revised Section 508 standards for information and communication technology equipment to ensure accessibility and usability. All components must undergo rigorous testing to validate performance, reliability, and compliance prior to delivery. This is a subcontract under the Office of Acquisition Grants, Department of the Interior, with a North American Industry Classification System code of 334511 indicating it pertains to navigational and surveying instrument manufacturing. The solicitation was posted on August 6, 2026, and responses are due by August 19, 2026. The place of performance and specific delivery location are not detailed, but contractors must be prepared to meet all technical and regulatory requirements without deviation. The opportunity is open to qualified subcontractors seeking to supply advanced gyrocompass and altitude systems to federal agencies.

General Info

Procure, test, and deliver Pack Quadrans G2 gyrocompass with 0.5° accuracy, serial/Ethernet I/O, and 508 compliance.

Agency

Department Of The Interior → Office Of Acquisiton GrantsView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 10:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Office Of Acquisiton Grants

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Office Of Acquisiton Grants

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, test, and deliver a new Pack Quadrans G2 IMO Grade Gyrocompass and Altitude System with heading accuracy of 0.5° or better, serial and ethernet I/O, and compliance with Revised Section 508 standards for ICT equipment.

Similar Contracts

Same NAICS industry code

Gravimetric Verification and Barcode Scanning Integration

249-NETWORK Contract Office 9 (36C249)

POSTED

about 20 hours ago

DEADLINE

Optical Atomic Clock System Supply and Integration

Department Of Commerce Nist

POSTED

about 20 hours ago

DEADLINE

Custom CTA Module Design and Fabrication

NASA Shared Services Center

POSTED

about 20 hours ago

DEADLINE

High-Reliability PCIe Multifunction I/O Board Supply

FA8579 Software Sprt Afsc Pzim

POSTED

about 20 hours ago

DEADLINE

New Manufacture of Computer/Spoiler (NSN 6615-01-036-3198, P/N 4030470-903)The contract outlines the manufacture and qualification of the Computer/Spoiler component designated as NSN 6615-01-036-3198 with part number 4030470-903 for the B-001B platform. The work encompasses full production lifecycle activities including technical data collection, submission of a System Acceptance Report, and adherence to rigorous quality requirements specified in MQR-PSD-1 and AS9100 standards. This effort is critical to ensuring the component meets all performance, reliability, and safety criteria for its intended military application. The contract type is classified as a subcontract under the North American Industry Classification System code 334511, indicating it involves the manufacturing of electronic components and equipment. The solicitation was posted on August 7, 2026, with a firm response deadline of August 15, 2026, at 4:59 a.m. The procuring agency is the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, and the work is to be performed wherever the selected subcontractor operates, with no specific geographic restrictions listed. Compliance with all applicable quality and documentation standards is mandatory, and failure to meet these requirements may result in rejection of the bid or non-compliance penalties. The contract seeks a qualified manufacturer capable of delivering a fully qualified, production-ready component in alignment with defense sector expectations.

Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RPC65

The contract pertains to the acquisition of a flight-critical antenna component under NSN 7R-5985-015686919-E8, with a quantity of four units to be delivered FOB origin. Due to the unique design capability, proprietary manufacturing knowledge, and specialized technical data held exclusively by previously approved sources, procurement is restricted to those entities previously vetted and authorized by the Government. The item requires formal engineering source approval prior to contract award, as the available technical data is insufficient to support full and open competition, and the qualification of any new supplier would take longer than the timeline allows. Only preapproved sources have been solicited, and any entity not currently approved must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on the nature of their proposed involvement. Failure to provide complete and accurate information as specified will result in disqualification from consideration. Requests for source approval already under evaluation at NAVSUP WSS must include a copy of the original submission cover letter. The Government is pursuing this acquisition under FAR 6.302-1, allowing sole-source negotiation due to the absence of qualified alternate suppliers and the critical nature of the component. While the notice is not a request for competitive proposals, all responsible parties may submit capability statements within 45 days of the publication date, or 30 days if under an existing Basic Ordering Agreement. Offers must conform strictly to the source approval requirements, and the Government retains full discretion to proceed without competition based on operational needs and market assessments. Commercial item acquisition policies under FAR Part 12 are not being applied, but interested vendors may still declare if they can meet the requirement with a commercial item within 15 days. Technical specifications and associated documents may be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not stocked there. Proposals must be directed to the designated point of contact, Chris Campellone, and submitted prior to the September 21, 2026 deadline.

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month

ACCELEROMETER,MECHA

Solicitation # N0010426QNE28

This contract solicits repair services for specific naval components including the TOWED ARRAY SONAR, ADAPTER ASSEMBLY IN, ACCELEROMETER MECHA, CIRCUIT CARD ASSEMBLY, and RECEIVING SET SONAR, each identified by their respective NSNs and reference numbers. All repairs must adhere strictly to military standards such as MIL-STD-129 and MIL-STD-130 for marking and identification, and require full compliance with electrostatic discharge controls for circuit cards. Contractors must be authorized distributors of the original manufacturer and hold an active U.S. security clearance in accordance with DD Form 254 due to the controlled technical data involved. Repairs must eliminate all metallic mercury contamination, and any use of mercury requires prior written government approval with accompanying warning labels. The contract mandates Government-Source Inspection and Acceptance, and all repair records must be retained for 365 days after final delivery. The repair turnaround time is set at 375 days measured from physical receipt of the asset at the contractor's facility as recorded in the Commercial Asset Visibility system. Proposals must include firm-fixed pricing for both repair and Beyond Repair scenarios, along with throughput capacity per month and the original procurement cost of the item. Substitutions or design changes require written government authorization and must be classified under specific code designations. The contract includes an option to increase the order quantity by up to 100% within 468 days of award at the same contracted price. All submissions must be sent exclusively via email to Rachel E. Kern, and the acquisition is conducted under emergency flexibility authorities with induction expiration 120 days after award. Packaging must comply with MIL-STD-2073, and all subcontractors are bound by the same requirements regarding mercury, security, and quality control.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Second Industry Day Announcement: Low Profile Mast (LPM) Program

Solicitation # N00024-26-R-6215A

The U.S. Navy, through the Direct Reporting Portfolio Manager for Submarines and the Submarine Electromagnetic Systems Program Office, is hosting a second Industry Day on September 3, 2026, to engage with industry partners on the Low Profile Mast (LPM) program. This event aims to accelerate acquisition by utilizing the Other Transaction Authority (OTA) pathway under Title 10 U.S.C. § 4022, encouraging innovation from both traditional and nontraditional defense companies. Participants will receive an update on refined technical requirements, an overview of the anticipated acquisition timeline, and clarification on the OTA process prior to the formal Request for Prototype Proposal release. The event will be held in-person and virtually in the Washington, D.C. area, with registration closing on August 21, 2026, and limited to two in-person participants per company. Attendance is restricted to companies registered in the United States, United Kingdom, or Australia, and all participants must be pre-approved with submitted individual credentials for facility access. The event will operate at the UNCLASSIFIED – Controlled Unclassified Information level, with no recording allowed and no hard-copy materials distributed; post-event materials will be shared via DoD SAFE. Registration requires valid CAGE or NCAGE numbers and submission of individual participant details including name, affiliation, contact information, and citizenship for security screening. A formal calendar invite with virtual access details will be sent only to approved registrants, with no teleconference option available. Questions on draft technical requirements must be submitted in writing by August 21, 2025, to the designated points of contact. This announcement is purely informational and does not constitute a solicitation or obligation to award contracts; any future formal solicitation will be issued through SAM.gov, and all costs associated with participation or submissions remain the responsibility of the respondents.

POSTED

about 20 hours ago

DEADLINE

HYDROPHONE MOUNT

Solicitation # SPRMM126QKG98

The contract pertains to the manufacture and delivery of a HYDROPHONE MOUNT under solicitation SPRMM126QKG98, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with performance requirements centered on strict adherence to specified engineering drawings, military standards, and quality systems. The item must conform to drawing 732-18-DL001 and associated revisions, with full configuration control governed by MIL-STD-973, requiring all engineering changes, deviations, or waivers to be formally submitted and approved by the Contracting Officer. Quality assurance mandates compliance with ISO 9001, and the contractor is responsible for all inspections unless otherwise directed, with the government retaining the right to conduct independent verification. Packaging and marking must meet MIL-STD-129 and MIL-STD-2073, and the product must be entirely free of metallic mercury and mercury contamination, with any exception requiring prior written approval and the inclusion of a warning plate identifying the hazardous component. Refurbished materials are prohibited, and distributors must clearly identify the original equipment manufacturer’s CAGE code and part number. The award will be made using the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability based on conformity to documented requirements. All contractual documentation must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) and its Wide Area Workflow (WAWF) system for invoices and receiving reports. Contractors must register for access to EDA and may obtain controlled drawings via SAM.gov as designated data custodians. The procurement is subject to the Mandatory Use of WFP Mod Assist Module and requires compliance with CMMC Level 1 self-certification for cybersecurity maturity. Small business representations and certifications are binding, and the contract is set aside for small businesses under a specific federal set-aside policy. Delivery dates and offer validity are left blank, indicating flexibility or pending determination. Communication must be conducted through a designated email point of contact, and vendor notifications regarding contract actions are advised via NAVSUP WSS Mechanicsburg. Any unauthorized changes to production facilities are prohibited unless approved in writing with a $250 administrative cost reduction attached, and all subcontractors must be held to the same mercury-free and quality compliance obligations. The contract emphasizes traceability, documentation retention for four years post-delivery, and strict enforcement of defense procurement regulations.

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

58--SLAT ASSEMBLY, LBTX

Solicitation # SPRMM126RRA53

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

Advanced Electronic Warfare (ADVEW) Support

Solicitation # N00019-26-SIMACQ-TPM272-0236

The Naval Air Systems Command at NAS Patuxent River, Maryland, plans to issue a sole-source contract modification to BAE Systems in Nashua, New Hampshire, under Basic Order Agreement N00019-22-G-0009 and delivery order N00019-24-F-0125 to secure technical support for integrating the AN/ALE-55 Electronic Frequency Converter, Fiber-Optic Towed Decoy, and Dual Band Decoy with the Advanced Electronic Warfare system. This procurement is justified under Title 10 U.S.C. 3204(a)(1) and FAR 6.302-1, as BAE Systems is the only responsible source capable of meeting the government’s requirements, with no alternative suppliers available. The action is not open for competitive bidding, and the intent notice serves only to inform potential parties of the planned action and allow for the submission of interest or capability statements, which will be reviewed at the government’s sole discretion to determine if a competitive process should be pursued. Responses must be submitted in writing via email to Kathleen Erickson or Jessica Guy-Dietrich by the deadline of August 22, 2026, and no phone inquiries will be accepted. The procurement is categorized as a presolicitation under NAICS code 334511 with no set-aside provisions, and performance will occur in New Hampshire though the contracting office is located in Maryland. Companies seeking subcontracting opportunities should contact BAE Systems’ Contracts Manager Bryan Dufour directly. The government retains full authority to proceed with the sole-source award regardless of any responses received, and this notice does not constitute a solicitation or commitment to award.

Naval Air Systems Command

POSTED

about 20 hours ago

DEADLINE

Expeditionary Unmanned Aerial System (eUAS) Manufacturing and Employment Capability Request for Information

Solicitation # RSO-AMPOECT-04

The U.S. Air Force Rapid Sustainment Office has issued a Capability Request for Information (CRFI) under RSO-AMPOECT-04 to explore market capabilities for an expeditionary unmanned aerial system (eUAS) manufacturing and employment solution tailored for austere, forward-deployed environments. This initiative seeks to enable rapid, on-demand production of attritable UASs, first-person view drone kits, counter-UAS interceptors, spare parts, and accessories using mobile, transportable manufacturing systems that reduce dependency on traditional supply chains. The system must be drone-agnostic, compatible with open architecture standards such as Modular Open Systems Approach (MOSA), and capable of ingesting standard file formats like STEP, STL, and 3MF locally. It must fit within an ISO container or ISU-90 footprint, be transportable via tactical and strategic airlift assets—including C-130s and helicopter sling-loads—and withstand extreme environmental conditions from -40°F to 125°F with MIL-STD-810-equivalent dust and water resistance. Power must be compatible with standard military generators or tactical microgrids, supported by an industrial-grade uninterruptible power supply, and the system must comply with NFPA 70 hazardous location standards for volatile materials. Technical requirements include hardware-encrypted local storage compliant with FIPS 140-2/3, full integration of the Department of Defense Risk Management Framework (DoDI 8510.01), and strict adherence to NDAA FY2020 Section 848 and DCMA Blue List architecture, excluding all components, software, or raw materials from covered nations including China, Russia, Iran, and North Korea. Offerors must demonstrate current Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL), experience in rapid UAS manufacturing under austere conditions, compact design optimization, power interoperability across international and off-grid sources, and intuitive operator interfaces. Submissions are limited to an 11-page white paper—one page for business information including CAGE code, UEI, small business status, and Buy American Act compliance plan, and ten pages detailing technical approach, experience, and compliance with all specified requirements. Responses must be sent electronically to aflcmc.rod.ect@us.af.mil no later than 30 calendar days after the CRFI’s posting to SAM.gov, with no verbal inquiries accepted and no reimbursement for response costs. Proprietary information must

FA8684 Aflcmc Rodk

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of The Interior → Office Of Acquisiton Grants

Same awarding agency

Jet boat with motor and trailer

Solicitation # 140G0326Q0194

The contract seeks a jet boat complete with motor and trailer under solicitation number 140G0326Q0194, posted on August 7, 2026, with proposals due by August 14, 2026, at 3:00 PM. This is a combined solicitation under NAICS code 336612, which pertains to boat building. The contracting office is the Office of Acquisition Grants within the Department of the Interior, located in Sacramento, California, with the place of performance unspecified. All bids must be submitted through the designated SAM.gov portal, and inquiries should be directed to Anthony Berry, the primary point of contact, via email at aberry@usgs.gov or by phone, though no phone number is provided. There is no set-aside designation for small businesses or other categories, meaning the opportunity is open to all eligible offerors.

POSTED

about 20 hours ago

DEADLINE

Remotely Operated Vehicle (ROV)

Solicitation # 140G0326Q0192

The U.S. Department of the Interior's Office of Acquisition Grants is seeking proposals for the lease of a Remotely Operated Vehicle (ROV) under solicitation number 140G0326Q0192, posted on August 7, 2026, with responses due by August 21, 2026. The procurement falls under NAICS code 532411 for Commercial and Industrial Machinery and Equipment Rental and Leasing, and the office is located in Sacramento, California, with Tracy Huot listed as the primary point of contact for inquiries via phone or email. The contract does not specify a particular set-aside designation, indicating it is open to all eligible responders without restrictions based on business size or ownership type. The place of performance has not been defined in the solicitation, leaving flexibility for the contractor to determine operational logistics, though all equipment must meet federal requirements for deployment in applicable federal water or offshore environments. The solicitation is hosted on SAM.gov, and interested parties must submit their proposals through the official federal procurement portal prior to the stated deadline.

Commercial Air, Rail, and Water Transportation Equipment Rental and Leasing

POSTED

about 20 hours ago

DEADLINE

global class research vessel to launch ROV

Solicitation # 140G0326Q0193

The U.S. Department of the Interior, through the Office of Acquisition Grants, is seeking a global class research vessel capable of launching a remotely operated vehicle for scientific operations. The solicitation, identified by number 140G0326Q0193, was posted on August 7, 2026, with responses due by August 21, 2026. The contract falls under NAICS code 532411, which pertains to recreational and other water vessels manufacturing, indicating a focus on specialized vessel procurement rather than general maritime services. The primary point of contact is Tracy Huot at the Sacramento, California office, reachable via email and phone for inquiries related to technical specifications, operational requirements, or submission guidelines. Performance of the contract is expected to occur in unassigned locations, suggesting the vessel will operate in diverse global marine environments for research missions. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of business size or demographic status.

Commercial Air, Rail, and Water Transportation Equipment Rental and Leasing

POSTED

about 20 hours ago

DEADLINE

59--FISH DETECTOR TAGS (PIT TAGS)

Solicitation # 140G0326Q0182

The U.S. Geological Survey intends to award a sole-source firm-fixed-price purchase order to Biomark, Inc. for approximately 37,000 preloaded 12mm Passive Integrated Transponder (PIT) tags to support fish population monitoring in the Colorado River and Little Colorado River. The delivery schedule mandates a base delivery date of August 31, 2026, with optional deliveries scheduled for September 10 and September 20, 2026, driven by manufacturer lead times and operational needs. The tags must comply with ISO 11784/11785 FDX-B standards, operate at 134.2 kHz, and be fully compatible with existing Biomark scanning systems and autonomous antenna setups. All tags must be preloaded into injectable needles and proven to deliver reliable read range and detectability in riverine environments. Vendor responses must include a capability statement limited to three pages, product documentation detailing manufacturer specifications, lot traceability, warranty terms, handling and storage instructions, test data, field-use history, customer references, manufacturing lead time confirmation, and evidence of active SAM.gov registration with a valid CAGE code and Unique Entity ID. The solicitation number is 140G0326Q0182, posted on August 7, 2026, with responses due by August 10, 2026, and must be submitted electronically to Joel Berberena at the U.S. Department of the Interior’s Office of Acquisition Grants in Sacramento, California. No formal contract clauses, evaluation factors, pricing details, or inspection protocols are included, as this is a sources sought notice under FAR Part 10 for market research, not a binding solicitation or award. The NAICS code is 334419 with a small business size standard of 750 employees, and no set-aside status is designated. The government retains final authority for inspection and acceptance, with delivery expected to the contracting office in Sacramento, though deployment will occur at riverine monitoring sites.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

EXAIL GYROCOMPASS ALIGNMENT TOOL

Solicitation # 140G0326Q0135

The US Geological Survey is seeking information from potential suppliers capable of providing a portable fiber-optic gyrocompass meeting specific technical requirements, as part of market research to inform future acquisition planning. The desired system must be a Quadrans G2 IMO Grade Attitude and Heading Reference System weighing less than five kilograms, operating reliably in temperature ranges from 0 to 100 degrees Fahrenheit, achieving heading accuracy of 0.5 degrees or better, and settling within 30 minutes with minimal to no calibration or maintenance. The device must include both serial and Ethernet communication interfaces and be designed for rugged field use. Responses must include a product data sheet demonstrating conformance to these specifications and must be submitted exclusively via email to yangzhi_deng@ios.doi.gov no later than June 15, 2026, at 1500 PST. This is not a solicitation for proposals or a guarantee of award; the government will not reimburse any costs incurred by respondents. The North American Industry Classification System code is 334511 with a size standard of 1,350 employees, and the associated Product Service Code is 6655 for Geophysical Instrument. All submissions must be electronic; hardcopy or web portal submissions will not be accepted.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N--Mobile Surveillance Security Systems

Solicitation # 140G0326Q0128

The contract, identified as Amendment 0003 under solicitation number 140G0326Q0128, is a total small business set-aside for mobile surveillance security trailer systems, issued by the U.S. Geological Survey under the Department of the Interior. The requirement calls for the provision, installation, operation, and eventual removal of two fully autonomous mobile surveillance trailers to secure the WAWSC Field Services Facility in Lakewood, Washington. The systems must deliver 24/7/365 monitoring with 4K video, real-time alerting, AI-assisted detection, cloud-based storage of at least 90 days, deterrence features including lighting and audio, and remote access compliant with Section 508 accessibility standards and multi-factor authentication. All data must be stored within the United States, and the contractor is responsible for maintenance, technical support, training of government personnel, and complete removal of all equipment upon contract termination. The period of performance spans two years, with a base period from August 24, 2026, to August 23, 2027, and one optional one-year extension available under FAR 52.217-9, subject to a total contract duration cap of 24 months. The contract also includes an option to extend services under FAR 52.217-8, limited to a cumulative six-month extension. The procurement is non-LPTA, with award based on a trade-off where technical capability, experience, past performance, and price are evaluated collectively, with non-price factors significantly more important than cost. Technical evaluation focuses on system autonomy, camera performance, connectivity, cloud security, monitoring protocols, maintenance support, training, and installation processes. Offerors must submit a firm-fixed-price quote, a completed SF-18, an Accessibility Conformance Report using VPAT, technical capability statements, product literature, past performance details, and a valid UEI. All proposals must be submitted via email to the contracting officer by the response deadline of August 17, 2026, with questions due by August 10, 2026. Payment is mandatory through the Internet Payment Platform (IPP), with no use of WAWF, and invoices must be submitted electronically. Contractor personnel must comply with labor standards under the Service Contract Act, Executive Order 14026 for minimum wages, Executive Order 13706 for paid sick leave, and

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

45--CALCIUM THIOSULPHATE INJECTION SYSTEM

Solicitation # 140G0326Q0190

The U.S. Geological Survey’s Western Fisheries Research Center is soliciting a Firm-Fixed Price quote for a Calcium Thiosulphate Injection System, including installation at its Seattle, WA facility, under a small business set-aside authorized under FAR Part 12. The system must be a duplex peristaltic pump skid capable of metering between 0.001 and 1.35 gallons per hour with a turndown ratio of at least 1,000:1, integrated via 4–20mA analog signals into the existing Siemens Desigo Building Management System, and constructed using materials chemically compatible with calcium thiosulfate, such as Flex-A-Prene tubing, with all wetted components certified to NSF/ANSI 61 for drinking water contact. The equipment must be NEMA 4X (IP66) rated for outdoor use, housed in a skid with a minimum pressure rating of 150 PSI, and carry a one-year warranty on pumps and a two-year warranty on the complete system. Offers are required to include a signed SF-18, a firm fixed price quote, detailed technical specifications, and a current System for Award Management Unique Entity ID. Preference is given to products manufactured in the United States as mandated by the Buy American Act, and offerors must declare the country of origin with their submission. Quotes must be submitted exclusively via email to elizabeth_adam@ios.doi.gov no later than Thursday, August 13, 2026, at 10:00 a.m. Eastern Time, with FOB Destination terms applying for delivery to 6505 NE 65th Street, Seattle, WA 98115. The estimated performance period runs from August 15 to November 15, 2026, though an alternate timeline of September 1 to December 1, 2026, is referenced in the technical requirements. All proposals will be evaluated through a comparative trade-off process, focusing on both technical compliance with the Salient Characteristics and price, without reliance on a Lowest Price Technically Acceptable methodology. Technical acceptability requires full adherence to performance, material, certification, and integration criteria, and offers must include supporting documentation such as product literature or test data. Payment will be processed electronically through the Invoice Processing Platform (IPP), and the contractor must coordinate with USGS facility staff to minimize operational disruption during installation. The contract includes

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

23--Custom marine trailer

Solicitation # 140G0326Q0179

The U.S. Geological Survey, Office of Acquisition Grants under the Department of the Interior, is procuring a custom gooseneck marine trailer under solicitation number 140G0326Q0179 for the research vessel Parke Snavely. This is a firm-fixed-price, small business set-aside solicitation directed toward manufacturers under NAICS code 336212 with a size standard of 1,000 employees. The trailer must be precision-engineered to accommodate the vessel’s 3D hull model, featuring a triple-axle configuration, galvanized structural components, sealed wiring, LED lighting, rear strobe lights, stainless-steel tie-downs, fully functional braking and hub pressurization systems, and UHMW-PE bunk surfaces to prevent hull damage. All components must comply with DOT regulations for the trailer’s GVWR class and incorporate corrosion-resistant materials. Delivery is required to the USGS PCMSC Marine Facility in Santa Cruz, California, with a 90-day performance period from contract award and a firm-fixed-price freight quote mandatory for delivery to that address. The evaluation is based on a best-value trade-off, prioritizing technical capability and acceptability, followed by technical approach and quality assurance, then past performance, with price considered last. Offerors must submit proposals electronically via email to Anthony Berry by 8:00 a.m. Pacific Time on August 6, 2026, using Standard Form 18 with supporting technical documentation and an active UEI from SAM. Compliance with multiple FAR clauses is required, including Buy American Act Alternate I, prohibitions on covered telecommunications equipment and Kaspersky products, restrictions on Iran-related transactions, child labor certification, whistleblower protections, and mandatory representations regarding small business status and socioeconomic certifications. The contractor must also adhere to special requirements such as a ban on certain unmanned aircraft systems, OFAC sanctions compliance, and immediate disclosure within 72 hours of any non-compliance. Inspection and acceptance occur upon delivery in Santa Cruz, with the vendor responsible for correcting all defects at no additional cost. Payment will be processed electronically through the Invoice Processing Platform, and no WAWF submissions are permitted. The contract does not specify packaging or marking standards beyond implied DOT compliance, and no formal COR or COTR is named, with Anthony Berry serving as the primary point of contact for all inquiries.

Truck Trailer Manufacturing

POSTED

DEADLINE

66--Global Navigation Satellite System (GNSS) Receiver

Solicitation # 140G0326Q0152

The U.S. Geological Survey within the Department of the Interior is conducting market research through a sources sought announcement for high-precision Global Navigation Satellite System (GNSS) receivers to support monitoring of surface deformation and ground motion for public safety applications related to earthquakes, volcanoes, and landslides. The technical requirements mandate receivers capable of simultaneously tracking all openly available signals from GPS, GLONASS, and SBAS, with a strong preference for compatibility with additional systems including Galileo, BeiDou, QZSS, and IRNSS. Units must be compact, not exceeding 11 inches in length, 7 inches in width, and 4 inches in height, weigh no more than 4.4 pounds, and meet a minimum IP65 environmental rating with operational tolerance from -40°C to +65°C. Each receiver must demonstrate a Mean Time Between Failure of at least 57,500 hours under Bellcore “Ground Benign” standards, feature a minimum of 16 Gb industrial-grade internal memory, and stream or log GNSS observables at 10 Hz or higher. Compatibility with existing USGS antennas including Topcon CR-G3, Ashtech choke ring, Septentrio/Tallysman VeraChoke, and Trimble Zephyr models is required, along with at least one year of operational history for the exact configuration proposed. Responses must be submitted as a capability statement and supporting literature, limited to ten pages, via email by the July 6, 2026 deadline, and the government explicitly states it is not obligated to award a contract based on this inquiry nor will it compensate respondents for preparation costs. This announcement is designated as a Request for Information and not a formal solicitation, meaning no award will result directly from this submission. The information gathered will inform future acquisition strategy and planning for an anticipated Indefinite Delivery, Indefinite Quantity (IDIQ) contract for GNSS receivers with an estimated ordering period from September 15, 2026, through September 15, 2031. Respondents are advised that no contract provisions, clauses, evaluation factors, or pricing structures are binding at this stage, and all submissions will be used solely for market research purposes. The point of contact for inquiries is Joahnne Ongjoco at the Department of the Interior, Office of Acquisition Grants in Sacramento, CA, and any responses submitted through SAM.gov, hardcopy, or other unauthorized methods will not be considered. The

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

On-Site Installation, Training, and Technical Support Services

Engineering Services

POSTED

DEADLINE

Gamma Spectrometry Software Development and Licensing

Software Publishers

POSTED

DEADLINE

Liquid Nitrogen (LN2) Recycler and Cooling System Supply

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE