Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply Discrepancy Reporting and Warranty Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the administration of post-delivery warranty claims and defect resolution for equipment and supplies delivered under a Defense Logistics Agency subcontract, with specific procedures for handling transit-related damage through the distributor network and non-transit defects via the WEBSDR system. This includes evaluating, documenting, and resolving all reported discrepancies in a timely and compliant manner to ensure operational readiness and customer satisfaction, with clear delineation between damage occurring during transport and failures arising after delivery. The work is governed under NAICS code 811411 and falls under the Department of Defense, with performance obligations tied to the contract reference SPE7LX26F36Z7, though no specific location or point of contact is provided. All activities must align with DLA’s established protocols for warranty and supply discrepancy reporting, emphasizing accuracy, traceability, and coordination with assigned vendors and internal systems to maintain the integrity of the defense supply chain.

General Info

Administer warranty claims and defect resolution for DLA equipment via distributor network and WEBSDR system.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

811411 - Home and Garden Equipment Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26F36Z7.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIRE, PNEUMATIC, VEHI

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 31

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Administer post-delivery warranty claims and defects, including transit-damage resolution through distributor and non-transit defects via WEBSDR.

Similar Contracts

Same NAICS industry code

Small Engine and Power Tool Repair

California Department of Transportation

POSTED

DEADLINE

IFPQ Small Engine Repair, Los Angeles County

Solicitation # 07A6477

The California Department of Transportation is seeking a contractor under solicitation number 07A6477 to provide as-needed repairs, services, and maintenance for state-owned small engine equipped tools, power equipment, and various electric tools within Los Angeles County. The selected contractor is responsible for furnishing all necessary labor, materials, parts, supplies, tools, and equipment to complete the work. This solicitation, posted on September 4, 2026, requires responses by September 22, 2026. The agreement includes specific requirements regarding bidder minimum qualifications, pricing, organic waste recycling obligations, and motor carrier permits. Additionally, the contractor must adhere to Title VI non-discrimination assurances and meet all specified insurance requirements. The primary point of contact for this effort is Tim Murphy, and the contract falls under NAICS code 811411.

California Department of Transportation

POSTED

DEADLINE

IFPQ Small Engine Repair, Los Angeles County

Solicitation # 07A6477

The State of California is seeking a contractor for tender 07A6477 to provide as-needed repairs, services, and maintenance for small engine equipped tools, power equipment, and various electric tools used by the California Department of Transportation in Los Angeles County. The selected contractor will be responsible for furnishing all necessary labor, materials, parts, supplies, tools, and equipment to ensure the operational readiness of state-owned equipment. Interested vendors must submit their responses by September 22, 2026, at 2:00 PM. For further inquiries regarding the contract language or content, the primary point of contact is Tim Murphy. Potential bidders should be aware that registration on the State of California website may be required to participate in this solicitation.

State of California

POSTED

DEADLINE

Small Engine Maintenance (Lawn Mowers and Weed Whackers)

Western Regional Health Authority

POSTED

DEADLINE

Authorized Kubota Service, Parts and Repair

Solicitation # 2026-IFB-LM-0410

The City of Pasadena Public Works Department, Building Systems and Fleet Management Division, is soliciting bids under project 2026-IFB-LM-0410 to establish a five-year contract for authorized Kubota equipment service, repair, and the supply of original equipment manufacturer (OEM) parts. Starting in Fiscal Year 2027, the selected vendor will provide as-needed diagnostics, preventative maintenance, and repairs for equipment used by the Parks and Recreation and Community Services Department, including turf tractors, skip loaders, and 7-gang mowers. To ensure operational readiness and maintain warranties, the contractor must be a manufacturer-authorized service provider and distributor using approved procedures and genuine OEM parts. Services may be performed at either the City's facility or the contractor's location. The contract will be awarded to the lowest responsive and responsible bidder based on the grand total price submitted through the City's eProcurement Portal. Bids are due by 3:00 PM on September 14, 2026. Key requirements include the submission of a Unique Entity Identifier (UEI), a non-collusion declaration, and various socioeconomic certifications. While the solicitation includes standard bond forms, a waiver for labor, materials, and performance bonds has been approved due to the service-based nature of the work. The vendor must adhere to strict delivery timelines, with parts ordered before 12:00 PM required within three hours. Payment is processed through the City's Vendor Invoice Portal, with checks issued on Tuesdays and Thursdays.

Public Works Department, BSFMD

POSTED

DEADLINE

Equipment Labeling and Marking Services

POSTED

DEADLINE

IUID (Item Unique Identification) Marking ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense provides for Item Unique Identification marking services. The scope of work requires the application of permanent, machine-readable IUID markings on all items valued at over 5,000 dollars to ensure full compliance with DFARS 252.211-7003 and MIL-STD-130 standards. The project is categorized under NAICS code 811411 and was posted on August 17, 2026. This effort ensures that high-value assets are properly tracked and identified according to federal defense acquisition regulations.

Defense Logistics Agency

POSTED

DEADLINE

UDI/UID Item Marking and Barcoding ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on UDI/UID Item Marking and Barcoding Services. The primary objective is to ensure compliance with MIL-STD-130N through the implementation of permanent direct part marking, such as laser etching, and the subsequent validation of barcodes. The project is categorized under NAICS code 811411 and was posted on August 17, 2026. This effort ensures that all items meet the strict unique identification requirements necessary for military logistics and asset tracking.

Defense Logistics Agency

POSTED

DEADLINE

Unique Item Identification (UID) Marking and Data ReportingThis subcontract, titled Unique Item Identification (UID) Marking and Data Reporting, is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to ensure that permanent UID markings are applied in strict accordance with MIL-STD-130 standards. The contractor is responsible for reporting all required data elements through the Wide Area Workflow (WAWF) or other equivalent Department of Defense logistics systems. This effort falls under NAICS code 811411 and was posted on August 17, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Battery Packaging and Marking Services (PID Compliance)This subcontract, titled Battery Packaging and Marking Services (PID Compliance), is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to ensure that batteries are packaged, labeled, and marked in strict accordance with DLA PID standards and the specifications outlined in Attachment 10 to maintain full traceability. A critical requirement of the contract is adherence to MIL-STD-130 for identification marking. The services fall under NAICS code 811411 and are designed to meet rigorous military logistics and supply chain standards for the handling and identification of battery components.

Defense Logistics Agency

POSTED

DEADLINE

Government-Furnished Labeling and Marking ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the provision of government-furnished labeling and marking services. The primary objective is the application of labels, barcodes, and markings that strictly adhere to MIL-STD-129 standards, ensuring all materials are properly identified for military logistics. The scope of work specifically includes the implementation of Block I/II data, Unit of Issue, Quantity Unit Pack, and formatting compatible with the Wide Area Workflow system. Classified under NAICS code 811411, the contract ensures that all marking requirements are met to facilitate seamless tracking and processing within the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection & Workmanship OversightThis subcontract, titled Quality Inspection and Workmanship Oversight, is issued by the Government of Jamaica through the Post and Telecommunications Department. The primary objective of the agreement is to provide independent inspection and verification services to ensure that roofing installations at two post office sites meet all required quality standards, workmanship expectations, and building code compliance. The contract is categorized under NAICS code 811411 and was posted on August 17, 2026. It focuses on maintaining rigorous oversight of construction quality to guarantee that the roofing work is executed according to professional specifications and regulatory requirements.

Post and Telecommunications Department

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

DEADLINE

Supply of Sediment Strainer (NSN 4730-01-589-9155)

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Schneider Electric Storage Battery (APC)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

Solicitation SPE7L7-26-Q-2422 is a firm-fixed-price request for the procurement of one maintenance-free sealed lead-acid storage battery, identified as Schneider Electric IT Corporation part number APCRBC133 (NSN 6140-01-614-1949). The item is designated as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the origin. The shipment is destined for the USS Harvey C Barnum Jr (DDG 124). The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is a battery, it must comply with 49 CFR regulations for nonspillable batteries, requiring specific outer packaging, terminal protection, and durable nonspillable marking. Additionally, the contractor must comply with NAVSEA 5100-003D regarding mercury restrictions and provide a Certificate of Conformance. Sampling will be conducted per MIL-STD-1916 or ASQ H1331. Award will be based on the offeror's conformance to solicitation requirements and their ability to meet the specified technical and quality standards.

Battery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

The Defense Logistics Agency Land and Maritime has issued solicitation SPE7L7-26-Q-2420 for the procurement of one sediment strainer, identified by NSN 4730-01-589-9155. This is a firm fixed price contract with a required delivery date of 60 days after receipt of order. The item is to be delivered to the USS Michael Monsoor DDG 1001, with both inspection and acceptance occurring at the destination. Quotations must be submitted by September 21, 2026, and must remain valid for 90 days. Technical compliance requires adherence to TDP Rev C Gen 3 and basic drawing 80064 841499 Revision L. The contract mandates strict environmental and quality standards, including the prohibition of intentionally added mercury and class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, and compliance with DFARS cybersecurity and Buy American certifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS