Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of 120V Power Cords for Medical Equipment

Active

Federal

Response Deadline08/06/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of two standard and two grounded 120V U.S.-compliant hospital-grade power cords designed specifically for use with the ESC2 surgical chair, ensuring full compliance with medical device safety and electrical standards. These power cords must meet all applicable U.S. regulations for hospital-grade equipment, providing reliable, high-integrity power connections in clinical environments where safety and performance are critical. The requirement is issued as a subcontract under NAICS code 335931, indicating it falls within the category of electrical appliance, appliance component, and other electrical equipment manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 6, 2026, at 11:00 PM, and the place of performance is specified as Fargo, with a ZIP code of 58102. The contracting activity is managed by the Network Contract Office 23 under the Department of Veterans Affairs, though no specific point of contact or set-aside details are provided. All proposers must ensure their submissions align with the technical specifications for hospital-grade cords and are capable of supporting the ESC2 surgical chair in a healthcare setting without compromise to safety or function.

General Info

Supply two standard and two grounded 120V U.S. hospital-grade power cords for ESC2 surgical chair, compliant with medical standards.

Agency

Department Of Veterans Affairs → Network Contract Office 23 (36C263)View Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Fargo, MN, 58102

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 11:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → Network Contract Office 23 (36C263)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → Network Contract Office 23 (36C263)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of two standard and two grounded 120V U.S.-compliant hospital-grade power cords compatible with the ESC2 surgical chair.

Similar Contracts

Same NAICS industry code

Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThe contract entails the full lifecycle manufacturing of a specialized electrical cable assembly as specified by the government, covering all phases from initial design validation through component procurement, assembly, rigorous testing, proper labeling, secure packaging, and final delivery to stock locations within the contiguous United States. The work must adhere strictly to government technical and quality standards, ensuring the cable assemblies meet mission-critical performance requirements for defense applications. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the North American Industry Classification System code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed under the ASC Commodities Division of the Department of Defense. The contract is structured as a subcontract and requires compliance with all applicable defense procurement regulations, with delivery points limited to CONUS-based federal storage facilities.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThe contract is for the procurement of 240 units of a special purpose electrical cable assembly, identified by NSN 6150-01-385-7941, under a small business total set-aside with NAICS code 335931. Delivery is required within 150 days after receipt of order, and the contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle with a lifetime ceiling of $350,000 across all orders. Inspection and acceptance occur at origin, with the contractor responsible for maintaining an acceptable government-approved inspection system and ensuring compliance with quality standards including ISO 9001:2015 and the DLA Master List of Technical and Quality Requirements. The cable assembly contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, and compliance with these qualification requirements is mandatory. All items must be marked in accordance with MIL-STD-129 and RQ017 for physical identification, and packaging must adhere to DLA packaging requirements. The contract imposes strict cybersecurity requirements, including compliance with DFARS 252.204-7012 for safeguarding covered defense information, NIST SP 800-171 assessment mandates, and CMMC Level 2 certification for third-party assessments. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to authorized entities only, particularly those with approved US/Canada Joint Certification Program status and completed training on handling defense-controlled technical data. The contract includes standard clauses for termination, default, changes, and subcontracting, along with mandatory representations related to small business status, whistleblower rights, executive compensation reporting, and prohibition on restrictive confidentiality agreements. Invoicing must be conducted exclusively through the Wide Area WorkFlow system using appropriate document types based on contract type, and payment is routed via DoDAAC. The government will award based on a trade-off analysis where past performance—particularly historical quality, delivery compliance, and SPRS assessments—is significantly more important than price, which is approximately equal in weight to all other non-price factors combined.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThis contract solicits the procurement of 300 units of a special-purpose electrical cable assembly with NSN 6150-01-347-8428, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item is classified as covered defense information and may not be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Contractors must comply with DFARS 252.225-7048 and meet DLA-specific requirements to access this data, including holding an approved US/Canada Joint Certification Program certification, completing mandatory training on handling DOD export-controlled technical data, and successfully submitting the DLA Export-Controlled Technical Data Questionnaire. Distribution is restricted exclusively to DLA contractors who have been formally approved by the DLA controlling authority. Delivery is due 178 days after contract award, and the solicitation is set aside exclusively for small businesses under the SBA program, with responses due by August 11, 2026. The contracting activity is the ASC Commodities Division under the Department of Defense, and all correspondence should be directed to Joshua Tuggle.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

61--FUSE BLK/EMI A11, IN REPAIR/MODIFICATION OFThis contract solicitation, numbered N0010426QDB12, solicits repair services for the FUSE BLK/EMI A11 component under a firm-fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 78 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with the original manufacturer’s specifications, and the contractor is required to adhere to MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging. The Government will conduct mandatory inspections, and the contractor must maintain complete inspection records for 365 days post-delivery. Freight is FOB Origin and managed by the Navy under the CAV Statement of Work; all quotes must include unit and total prices along with the proposed RTAT, and failure to meet the 78-day requirement necessitates disclosure of capacity constraints. Repair performance is subject to a detailed subcontracting plan, Buy American provisions, cybersecurity maturity certification, and compliance with Defense Federal Acquisition Regulation Supplement clauses, including the mandatory use of Workflow Pro and the release of offeror information under Navy protocols. The awardee must hold authorization as an official distributor of the original manufacturer, and proof of authorization must accompany the proposal. The contract includes strict prohibitions against unapproved design, material, or part number substitutions, with any changes requiring written approval from the NAVICP-MECH Contracting Officer and classification under specific Code designations. Pricing must account for all costs related to repairing items in unwhole, damaged, or incomplete condition, and if an item is deemed beyond repair, a negotiated teardown and evaluation fee not to exceed a specified amount may apply. The contract also incorporates clauses on security exclusions, annual representations, cybersecurity readiness, and small business subcontracting obligations. All technical documentation referenced must be obtained through official DoD sources, with distribution restrictions governed by seven defined codes and safeguarding requirements under OPNAVINST 5510.1. Proposals are due by August 18, 2026, and the award will be bilateral, requiring the contractor’s written acceptance before execution. The award will be managed by the Navy Supply Systems Command in Mechanicsburg, Pennsylvania, and all communication must be directed to the designated point of contact.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

POWER SUPPLYThe contract pertains to the procurement of a POWER SUPPLY under solicitation SPRMM126QKE41, with a response deadline extended to September 4, 2026. The purchasing office is SPRMM1 DLA Mechanicsburg, located in Mechanicsburg, Pennsylvania, and all inquiries must be directed to Marchaunda Tiller at marchaunda.tiller@dla.mil. The contract requires strict adherence to quality standards including ISO9001 and IPC J-STD-001 Class 3 for soldering, and mandates compliance with MIL-STD-130 Rev N for part marking. Inspection and acceptance must occur at the manufacturer’s facility, with no acceptance allowed at destination. The contractor must provide a Certificate of Conformance when appropriate and ensure traceability of materials. Packaging must comply with MIL-STD-2073, and any packaging performed off-site requires disclosure of the facility’s location and CAGE code. The contract includes mandatory representations and certifications under federal acquisition regulations, including Buy American requirements, Small Business Program representations, and security prohibitions. Only authorized manufacturers or distributors may respond; distributors must provide signed documentation from the original equipment manufacturer attesting to their authorization. Surplus materials are not preferred and if used, must be new surplus with proper certification and justification per DLAD 11.302 and 11.390. Refurbished parts are generally prohibited. Delivery is desired within 90 days ADC, with all freight terms as FOB origin. The CAGE codes for the manufacturer and packaging facility must be provided, and any deviation from the solicited part number requires prior approval and documentation. All quotations must include accurate part numbers, NSNs, and nomenclature, with exceptions to requirements explicitly stated. Records of all inspections must be maintained for 365 days after final delivery. The contract prohibits the use of foreign nationals for access to controlled technical data and requires compliance with OPNAVINST 5510.1 distribution statement codes.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

in about 1 month

ACTUATOR,ELECTRO-METhis contract pertains to the procurement of two critical components for the MK 41 Vertical Launching System: the POWER SUPPLY ASSEMB and the ACTUATOR, ELECTRO-ME, under a Special Emergency Procurement Activity using Emergency Acquisition Flexibilities authority. The solicitation requires strict adherence to military standards including MIL-STD-130 for marking, MIL-STD-2000 for soldering, MIL-STD-129 for packaging and identification, and MIL-STD-973 for configuration control, with all work subject to inspection and acceptance at the source only—destination inspection is prohibited. The contractor must acquire or develop the Stable Base Master Phototools independently, as the government will not provide them, and must ensure traceability, military standard packaging, and compliance with ANSI/ESD S20.20 for electrostatic discharge control. No substitutions or design changes are permitted without prior written authorization, and deviations or waivers must be formally justified with evidence that quality, fit, form, or function will not be compromised. All offers must be submitted by the specified deadline via hardcopy or email to MARCHAUNDA.TILLER@DLA.MIL, with FMS quotes accepted in hardcopy form, and must include proof of being an authorized distributor if applicable. Surplus materials are not preferred; if submitted, they must be new surplus accompanied by a certification and comply with DLAD 11.302 and 11.390, and refurbished materials are explicitly prohibited. Delivery must be completed within 90 days ADC, with FOB origin terms applying, and all documentation including certificates of conformance, compliance with Buy American provisions, Small Business Program representations, and cybersecurity maturity certification must be included. Records of inspection and quality control must be retained for 365 days post-delivery, and the contracting office reserves the right to conduct any inspection necessary to verify conformity. The NAICS code is 335931, and the solicitation is managed by the Department of Defense through the DLA Mechanicsburg office with a designated point of contact for submissions and follow-up.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

CABLE ASSY,INBOARDThe contract pertains to the procurement of an Inboard Cable Assembly designated as SPECIAL EMPHASIS material due to its critical role in a shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The requirement is tied to Naval Sea Systems Command Drawing 7066213 and multiple other referenced drawings and specifications, with strict adherence to material, process, and certification standards mandated. Key materials such as QQ-N-286 alloy components require quantitative chemical and mechanical analysis, with testing restricted to approved laboratories for specialized tests like Slow Strain Rate Tensile Testing. First Article Testing of one complete assembly is mandatory prior to production, and all certifications must be traceable to individual items via unique heat-lot or traceability markings applied permanently in accordance with MIL-STD-792. The contract imposes comprehensive quality assurance controls including ISO-9001 or MIL-I-45208 compliant quality systems, mandatory government source inspection, and 100% verification of certifications and traceability data. Material handling, subcontractor oversight, welding procedures, and thread inspection must conform to detailed technical directives, and any deviation or waiver requires written approval from the Contracting Officer. The contractor must maintain full traceability from raw material through all manufacturing stages to final assembly, with documentation of all tests, inspections, and certifications submitted electronically via ECDS. All deliveries must meet strict compliance criteria, with nonconforming material subject to rejection. Packaging and preservation must comply with MIL-STD-2073. Delivery is set for no later than 400 days after contract award, with FAT reporting due within 180 days of order, and final certification data submitted no later than 20 days prior to delivery. The contract is issued under a Defense Priorities and Allocations System (DPAS) rating, making it a national defense priority item. The solicitation was originally set to close in 2026 but was revised with multiple extensions to adjust submission timelines and clarify quantity requirements, culminating in a final quantity of five units. The contracting officer and point of contact details are specified, with all communications, submissions, and waiver requests routed through designated channels including Jill Sabol’s email and the ECDS portal. Any use of PFAS-containing materials is prohibited, and replacements must meet contractual specifications without reliance on obsolete or discontinued specifications. Mercury and molybdenum disulfide-based lubricants are strictly forbidden, and only approved alternatives such as A-A-59

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

59--ASSY, HULL PENETRATThe contract solicitation titled 59--ASSY, HULL PENETRAT is issued under solicitation number N0010425RFD67A by the Naval Supply Systems Command Weapon Systems Support Mechanic, a division of the Department of Defense, with the office located in Mechanicsburg, Pennsylvania. The opportunity is classified as a presolicitation, indicating that formal bidding has not yet commenced, and it falls under NAICS code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026, at 6:00 a.m. Eastern Time. The primary point of contact for inquiries is Benjamin Spangler, reachable via email at benjamin.t.spangler.civ@us.navy.mil or by phone at 7712290573. Performance of the contract requirements is expected to occur at the same location as the contracting office in Mechanicsburg, Pennsylvania. No specific type of set aside has been designated for this opportunity, meaning it is open to all eligible offerors without restriction based on business size or status. Interested parties can access further details through the provided SAM.gov link.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

Precision Electromechanical Component ManufacturingThe contract involves the manufacture and delivery of a single precision pressure switch compliant with military specifications, encompassing full lifecycle activities from design validation through final certification. This includes the sourcing of all required components, assembly in a controlled environment, rigorous testing to ensure performance under extreme conditions, and formal documentation to verify adherence to defense standards. The work must be executed to meet exacting reliability and durability requirements typical of military-grade electromechanical systems. This is a subcontract under the NAICS code 335931 for other electrical equipment and component manufacturing, issued by the Electrical Devices Division of the Department of Defense. The place of performance is designated as FPO 09573, indicating operation in a military postal area, likely overseas or on a naval vessel. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, allowing potential suppliers a brief window to submit proposals. The contract is structured to ensure a single, fully compliant unit is delivered with complete traceability and certification, suitable for critical defense applications.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Wiring Harness ManufacturingThe contract mandates the manufacture, testing, and delivery of fifty military-grade wiring harnesses designated by NSN 6150-01-119-4113, with strict adherence to established design specifications, material traceability, packaging protocols, and inspection requirements to ensure full compliance with defense standards. All units must meet rigorous quality and performance benchmarks expected for military applications, with documentation and certification required at every stage of production to guarantee accountability and readiness for field deployment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 335931, which corresponds to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued by the ASC Commodities Division under the Department of Defense. While specific performance location and point of contact details are not provided, the work is expected to align with defense logistics requirements, and all bids must be submitted through the designated DIBBS portal prior to the deadline.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → Network Contract Office 23 (36C263)

Same awarding agency

Z2DA--618-CSI-240, SPS Equipment Site Prep 36C263-26-AP-1525 - FY26 NRM OSThe contract titled Z2DA--618-CSI-240, SPS Equipment Site Prep 36C263-26-AP-1525 - FY26 NRM OS is a solicitation issued by the Department of Veterans Affairs through the Network Contract Office 23 located in Saint Paul, Minnesota. It is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside, meaning only eligible SDVOSBs may compete for award, in accordance with FAR 19.14. TheNorth American Industry Classification System code 236220 applies, indicating the work involves construction of commercial and institutional buildings. The place of performance is in Minneapolis, Minnesota, with a zip code of 55417. The solicitation was posted on July 29, 2026, and responses are due by August 3, 2026, at 7:00 PM Eastern Time. Amendment 2 has been issued to address additional questions received during the solicitation period. Primary point of contact for inquiries is Contract Specialist Dean Flanders, reachable via email at dean.flanders@va.gov or by phone at 320-247-0331. The full solicitation details can be accessed online through the SAM.gov portal.

Commercial and Institutional Building Construction

POSTED

about 6 hours ago

DEADLINE

Supply of FS3 Switch AccessoryThe contract involves the supply of two FS3 switch units, which serve as a control interface accessory designed to be compatible with the Hausted ESC2 surgical chair system. This procurement is categorized as a subcontract under NAICS code 334510, indicating it falls within the classification of semiconductor and other electronic component manufacturing. The posting date is July 28, 2026, with a response deadline of August 6, 2026, by 11:00 PM, giving potential vendors a limited window to submit proposals. Performance of the contract is required to take place in Fargo, North Dakota, with a zip code of 58102, indicating the location where the goods will be delivered or the service rendered. The solicitation is managed by the Network Contract Office 23 under the Department of Veterans Affairs, suggesting the equipment will ultimately support medical facilities within the VA healthcare system. No set-aside provisions or specific organizational type criteria are indicated, leaving the opportunity open to all eligible contractors.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Supply of Full U Wrist Rest AssemblyThe contract pertains to the supply of two units of the Full U Wrist Rest Assembly, designed as a compatible accessory for the Hausted ESC2 surgical chair, intended for use in a medical setting. The requirement is issued under the NAICS code 336413, which classifies it within the surgical and medical instrument manufacturing sector, indicating a specialized manufacturing and supply need. The solicitation was posted on July 28, 2026, with a response deadline of August 6, 2026, at 11:00 PM, allowing potential vendors a limited window to submit proposals. The contract is structured as a subcontract, suggesting it is part of a larger procurement effort, likely managed through a prime contractor or integrated supply chain. Place of performance is specified as Fargo, North Dakota, with a ZIP code of 58102, confirming the physical destination for delivery and installation. The contract is procured by the Department of Veterans Affairs through the Network Contract Office 23, highlighting its alignment with VA healthcare infrastructure needs.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Ophthalmic Surgical Chairs (Brand Name or Equal)The contract calls for the procurement of two units of the Hausted ESC2 REVERSE TREND SURGI CHAIR or an equivalent model that meets specified technical requirements, including a powered base, comprehensive positioning controls, and compatibility with required surgical accessories. The equipment is intended for ophthalmic surgical use and must fully align with the performance and functional standards outlined in the solicitation to ensure seamless integration into clinical workflows. This subcontract, issued by the Department of Veterans Affairs through the Network Contract Office 23, has a posted date of July 28, 2026, with a response deadline of August 6, 2026. The place of performance is set for Fargo, North Dakota, with a zip code of 58102, and the procurement falls under NAICS code 339115, which pertains to surgical and medical instrument manufacturing. The solicitation does not specify a set-aside type, and no point of contact details are provided. All submissions must be received by the stated deadline to be considered.

Ophthalmic Goods Manufacturing

POSTED

DEADLINE

Environmental and Site Compliance ConsultingThe contract requires the performance of environmental assessments and ongoing compliance with federal and Department of Veterans Affairs siting regulations, specifically including evaluations of floodplain impacts and incompatible land use concerns. The work is intended to support site-specific decisions for VA facilities, ensuring all proposed actions align with applicable environmental laws and agency standards. The scope is focused on technical consulting services related to land use and environmental risk mitigation, with an emphasis on preemptive analysis to prevent regulatory violations or operational disruptions. This is a subcontract under the Department of Veterans Affairs, managed by the Network Contract Office 23, with performance expected to take place in Davenport. The solicitation was posted on July 28, 2026, and responses are due by August 24, 2026. The North American Industry Classification System code 541620 identifies this as an environmental consulting service, reflecting the specialized nature of the technical expertise required. There is no designated set-aside classification, and while specific contact information is not provided, the opportunity is accessible through the SAM.gov portal for qualified subcontractors seeking to support VA infrastructure planning and compliance efforts.

Environmental Consulting Services

POSTED

DEADLINE

Real Estate Lease and Facility Management ServicesThe Department of Veterans Affairs is seeking a long-term lease and comprehensive facility management services for a veterinary clinical facility in Davenport, with the lease term extending up to 20 years. The contract requires the selected vendor to provide a fully operational space that meets the specific clinical standards and requirements of the VA, ensuring the facility supports the delivery of high-quality veterinary care. In addition to leasing the property, the contractor is responsible for all ongoing operations and maintenance, including utilities, security, environmental compliance, repairs, and routine upkeep to maintain optimal functionality and safety for both staff and patients. The opportunity is structured as a subcontract under NAICS code 531120, which pertains to lessors of residential buildings and dwellings, though the scope extends far beyond simple property leasing to include active facility management. The solicitation was posted on July 28, 2026, with proposals due by August 24, 2026, and is being managed by the Network Contract Office 23. The place of performance is clearly identified as Davenport, though specific address details are not provided. The contractor must be prepared to meet long-term operational demands, adapt to evolving clinical needs, and maintain continuous compliance with federal standards throughout the duration of the lease. No set-aside designation is specified, meaning the contract is open to all eligible offerors.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Parking Lot Development and ADA-Compliant ParkingThe contract specifies the design and construction of a dedicated parking area with a minimum of 97 vehicle spaces, including designated areas for ADA-compliant access and government vehicles, all located within 500 feet of the main entrance. The work must adhere to federal accessibility standards and accommodate the operational needs of government fleets, ensuring full compliance with prevailing regulations. This subcontract falls under NAICS code 237310, indicating it is focused on heavy and civil engineering construction, specifically related to site preparation and road construction. The project is managed by the Department of Veterans Affairs through its Network Contract Office 23, with performance required in Davenport. The opportunity was posted on July 28, 2026, and responses are due by August 24, 2026, at 1:00 PM. While no set-aside designation or point of contact is provided, the location and scope indicate this is part of a larger facilities enhancement effort to improve accessibility and logistics for VA operations.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Physical Security System Design and InstallationThe contract involves the design and installation of comprehensive physical security systems meeting Veterans Affairs and Department of Justice standards, covering access control, surveillance, perimeter security, and intrusion detection technologies. The work is to be performed in Davenport, and the contract is classified as a subcontract under NAICS code 334220, which corresponds to electronic manufacturing and system integration services. The solicitation was posted on July 28, 2026, with a response deadline of August 24, 2026, and is managed by the Network Contract Office 23 under the Department of Veterans Affairs. All system components and implementation must adhere strictly to federal security protocols to ensure compliance and operational integrity across VA facilities.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Accessibility and Barrier-Free Design ComplianceThis contract requires full compliance with the ABAAS, ADA, and VA Barrier Free Design Standards across all interior and exterior elements of the facility, including entrances, restrooms, parking areas, and wayfinding systems. The work must ensure that every aspect of the built environment meets or exceeds federal accessibility mandates to guarantee equal access and usability for individuals with disabilities. The project is tied to a specific location in Davenport and falls under the NAICS code 541330, indicating it involves architectural and engineering services. The contract is structured as a subcontract under the Department of Veterans Affairs, managed by Network Contract Office 23, and must be responsive by the stated deadline of August 24, 2026. All deliverables must align precisely with the technical and regulatory benchmarks established by the referenced standards without exception.

Engineering Services

POSTED

DEADLINE

Site Development and Civil Engineering ServicesThe contract covers civil engineering and site development services for a project under the Department of Veterans Affairs, specifically managed by Network Contract Office 23. The scope includes grading, utility connections, stormwater management, and full compliance with local and Virginia site requirements, ensuring all work meets regulatory and environmental standards. The work is to be performed in Davenport, with no specific state or zip code provided for the performance location. The solicitation is classified as a subcontract under NAICS code 541330, which relates to architectural, engineering, and related services, and it was posted on July 28, 2026, with responses due by August 24, 2026. There is no set-aside type designated, and no point of contact information is available. The contract opportunity is accessible through the SAM.gov website, and all proposers must align their submissions with the technical and regulatory expectations outlined in the scope.

Engineering Services

POSTED

DEADLINE

Design and Construction of VA-Compliant Outpatient Clinic FacilityThe contract entails the full design, construction, and buildout of a VA-compliant outpatient clinic in Davenport, Iowa, to meet all federal healthcare facility standards and be fully operational and ready for occupancy by October 2028. The project encompasses every phase of development from architectural and engineering design through final construction, ensuring alignment with Veterans Affairs regulatory requirements for accessibility, safety, technology integration, and clinical functionality. The facility will be constructed to support outpatient medical services in accordance with federal guidelines, with strict adherence to timelines and quality benchmarks. This is a subcontract opportunity under NAICS code 236220 for healthcare facility construction, managed by the Department of Veterans Affairs through Network Contract Office 23. The solicitation was posted on July 28, 2026, with responses due by August 24, 2026. Performance of the work is exclusively located in Davenport, Iowa, and all deliverables must satisfy federal mandates for VA healthcare infrastructure. The contract requires a comprehensive approach to project delivery, encompassing coordination with VA stakeholders, compliance with federal procurement rules, and successful completion within the established deadline to ensure seamless transition to operational status.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Fire Extinguisher Disposal and Environmental ComplianceThe contract requires the safe and environmentally compliant disposal of expired or decommissioned fire extinguishers in accordance with EPA regulations. Responsibilities include depressurizing units, recovering hazardous agents, and ensuring all materials are properly recycled to meet federal environmental standards. The work must be performed with strict adherence to safety protocols to prevent contamination and ensure regulatory compliance throughout the entire process. This subcontract is issued under NAICS code 562920 by the Department of Veterans Affairs through the Network Contract Office 23, with performance required in St. Cloud, Minnesota, zip code 56303-2015. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, at 10:00 PM Eastern Time. All contractors must demonstrate capability and experience in handling hazardous materials and possess the necessary equipment and certifications to fulfill the scope of work without delays or violations.

Materials Recovery Facilities

POSTED

DEADLINE