Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of 187-Pin Electrical Connectors (Part# TV06DT-25-187P)

Active

Federal

Response Deadline07/31/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement and delivery of ten high-reliability 187-pin electrical connectors, designated as Part# TV06DT-25-187P, specifically for use in aircraft flight test systems. These connectors are critical components designed to meet stringent performance and durability standards required in aerospace environments. The solicitation is structured as a subcontract under a Total Small Business Set-Aside classification, ensuring eligibility is restricted to small businesses as defined by the SBA under FAR 19.5. The North American Industry Classification System code is 334417, indicating the work falls under the manufacturing of electronic connectors and fittings. The contract was posted on July 24, 2026, with a response deadline of July 31, 2026, at 6:00 PM. The place of performance is specified as Edwards, California, with a zip code of 93524, aligning with the operational location of the contracting activity. The agency responsible is the Department of Defense, specifically the FA9302 Aftc Pzz office, indicating this effort supports defense aerospace testing and development programs. While no point of contact or additional address details are provided, the procurement is accessible through the SAM.gov portal under the specified UI link, and adherence to quality, delivery timelines, and small business compliance is mandatory for award consideration.

General Info

Procure ten high-reliability 187-pin connectors for aerospace flight tests; small business set-aside; due July 31, 2026; Edwards, CA.

Agency

Department Of Defense → FA9302 Aftc PzzView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

Edwards, CA, 93524, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 06:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9302 Aftc Pzz

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA9302 Aftc Pzz

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 10 units of high-reliability 187-pin electrical connectors for aircraft flight test systems.

Similar Contracts

Same NAICS industry code

CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of electrical plug connectors identified by part number M39012/30-0503 and NSN 5935004304109, with a total quantity of 360 units divided into two line items: 36 units at $7017602347-0001 and 324 units at $7017602347-0002, both at a unit price of $1.00. Delivery is required within 84 days from the contract date, with FOB origin terms, zero variance in quantity, and inspection and acceptance occurring at the destination. The item is classified as a commercial item and must comply with MIL-PRF-39012F Sup 1 and MIL-PRF-39012/30J specifications. It is subject to strict quality and technical requirements mandated by the DLA Master List of Technical and Quality Requirements, which override all other standards. Zero-defect sampling is required under MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. The product must be marked and packaged per MIL-STD-129, commercially packaged per ASTM D3951 unless hazardous, in which case Fed-Std-313 IP025 applies, and palletization must meet DLA packaging rules. Use of ozone-depleting substances is prohibited unless prior written approval is obtained, and the item is restricted to qualified products listed under QPL for FSC 5935. Two distinct delivery addresses are specified—one for San Diego, CA and one for Robins AFB, GA—with required ship dates of January 15, 2026 and January 1, 2027 respectively, though the original delivery deadline for both is December 5, 2026. All documentation and compliance must adhere to DLA procedures and the solicitation SPE7M5-26-T-354T, issued under NASIC code 334417 by the Department of Defense's Active Devices Division.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

DUMMY CONNECTOR, PLUThis contract specifies the procurement of 230 units of a dummy connector, plug, identified by drawing number 1555424 Revision W and NSN 5935-00-911-7195, under solicitation SPE7M5-26-T-327A. The item is source-controlled, meaning only approved manufacturers—DCX-Chol Enterprises Inc, Diehl Defence GmbH & Co. KG, ITT Cannon LLC, Thermal Electronics Inc, and BAE Systems—are eligible to supply the component, and all delivered units must strictly conform to the drawing and associated limited rights data, which the government does not provide. Offerors must have direct access to this data or traceability to the approved sources, and any new vendors seeking qualification must contact the cognizant design activity. The contract prohibits the use of ozone-depleting chemicals and intentional inclusion of mercury or mercury-containing compounds, except for specific functional applications like batteries, sensors, and instruments specified by NAVSEA, which must include a secondary containment. Packaging must comply with MIL-STD-2073-1E using a clean/dry preservation method, unit pack with sealed plastic bag and fiberboard box, and labeling must adhere to MIL-STD-129 with no special marking required. Delivery is FOB origin, with a 186-day ADO timeline, and inspection and acceptance occur at the destination location, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates electronic invoicing and receiving reports through WAWF and requires compliance with all applicable cybersecurity standards, including NIST SP 800-171 and safeguarding of covered defense information under DFARS 252.204-7012. Offerors must also certify compliance with federal regulations on trafficking in persons, employment eligibility verification, sustainable products, and hazardous materials handling. The solicitation incorporates numerous FAR and DFARS clauses related to subcontracting, changes, inspection, default, payment, whistleblower rights, cybersecurity, and prohibitions on acquiring equipment from designated Chinese vendors or using hexavalent chromium. Socioeconomic set-asides for small businesses, WOSB, SDVOSB, HUBZone, and 8(a) firms are eligible, and the contract is subject to all applicable federal procurement rules with no defined contract type specified but clearly fixed-price in nature given the clauses referenced.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract is for the procurement of 14 units of a CONNECTOR, RECEPTACL identified by NSN 5935-01-699-2808 under solicitation SPE7M5-26-T-330T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 72 days of order receipt, with a mandatory delivery date of October 8, 2026, and shipment must be FOB Origin to the designated receiving warehouse in Tracy, California. Full and open competition applies, and the contract follows simplified acquisition procedures. The item must meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling, barcoding, and palletization per RP001, while hazardous materials require adherence to FED-STD-313 and TQ Requirement IP025, and non-hazardous items must be commercially packaged. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0, and any unspecified attributes are deemed major. Acceptance requires zero non-conformances if sampling is based on MIL-STD-105/ASQ Z1.4 unless otherwise noted. The contractor must comply with stringent cybersecurity mandates including DFARS 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 compliance, submitting an assessment score via the Supplier Performance Risk System. Export-controlled items are restricted under DFARS 252.225-7048, and the use of telecommunications equipment from prohibited entities such as Huawei or ZTE is banned

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACLEThe contract solicits 162 units of a connector, receptacle with NSN 5935-01-599-8583, to be delivered FOB origin within 91 days after order receipt, with a required delivery date of October 27, 2026. All items must be packaged in strict compliance with MIL-STD-2073-1E, using preservation method 31 (cleaning and drying only, no chemical preservative), wrapped in FA material, and without cushioning or dunnage. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and each item must be marked per MIL-STD-129 with no special marking codes applied. Physical identification of bare items must follow RQ017, and hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200). Inspection and acceptance occur at the destination facility located at DDSP New Cumberland, 2083 Normandy Drive, New Cumberland, PA 17070-5002, with no variance allowed in quantity — exactly 162 units are required. Transportation must comply with DLA procedures and specify use of U.S.-flag vessels for sea shipments. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking prevention, eligibility verification, sustainable purchasing, hazardous material identification, subcontracting, NIST SP 800-171 cybersecurity assessments, whistleblower rights, and payment obligations, with deviations applied as specified. The contracting officer is responsible for completing the contract type and inserting pricing, though no unit price is currently listed, rendering the total value indeterminate. Proposals must be submitted electronically through the DIBBS portal by July 27, 2026, and offerors are required to provide their UEI and CAGE code, indicate size status, and disclose any covered defense telecommunications equipment or joint venture participation. No evaluation factors are explicitly detailed in the available documentation, and no attachments are formally listed. All deliverables must conform to technical specifications referenced in the DLA Master List of Technical and Quality Requirements, and electronic invoicing via WAWF is mandated upon award.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

COVER, ELECTRICAL CO

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

BACKSHELL, ELECTRICAL CThe contract pertains to the procurement of a backsheel electrical connector and cable clamp adapter, identified by NSN 5935-01-239-5247 and part number G2804N22-28B, with a quantity of 12 units delivered FOB origin under solicitation SPE7M5-26-T-332C. Delivery is required within 111 days, with an original required delivery date of October 14, 2026, and a needed ship date of November 16, 2026. The unit price is $12.00 per unit for a total price of $144.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s RP001 requirements, MIL-STD-129 labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous per FED-STD-313. All packaging must be palletized according to DLAs packaging standards, with the specified unit of issue and quantity per unit pack. The material must not contain any Class I ozone-depleting substances unless explicitly approved in writing by the contracting officer, nor may mercury or mercury-containing compounds be intentionally added except in specific exempted applications like batteries, fluorescent lights, or naval instrumentation, with mandatory secondary containment for portable mercury-containing devices. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which override any conflicting specifications, including ASTM D3951. Sampling and inspection require adherence to MIL-STD-1916, ASQ H1331, or an equivalent zero-based sampling plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise dictated. For acceptance, zero non-conformances are required in the sample lot unless contract modifications specify otherwise. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Delivery is to the DLA San Joaquin Receiving Warehouse in Tracy, California, and transportation must follow DLAD Proc Notes C19 and

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

INSERT, ELECTRICAL CONN

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

LIGHT ASSEMBLY, INDIThe contract solicitation SPE4A6-26-T-07LL issued by the Defense Logistics Agency under the Department of Defense seeks four units of the Light Assembly, IND, identified by NSN 6210-01-370-7840, with a required delivery date of December 19, 2026, under a 144-day performance period following order placement. The delivery is FOB Origin, with final acceptance occurring at the destination facility located at W62G2T, DLA Dist San Joaquin, Tracy, CA, and the Government assumes responsibility for inspection and acceptance at that point. The contractor must comply with stringent packaging and marking standards including MIL-STD-2073-1E for packaging methods and MIL-STD-129 for labeling, with mandatory use of the “01 - 01 Fragile” indicator and full adherence to DLA’s RP001 palletization requirements. The use of mercury or mercury compounds in any packaging, preservation, or marking materials is strictly prohibited, and all hazardous materials must be identified and labeled per 29 CFR 1910.1200 and MIL-STD-129, with any exempt materials subject to prior disclosure and approval. The contract incorporates a comprehensive suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses governing compliance across cybersecurity, labor, environmental, and procurement integrity domains. This includes mandatory adherence to the Safeguarding Covered Defense Information and Cyber Incident Reporting clause (252.204-7012), NIST SP 800-171 assessment requirements, and prohibitions against procurement of covered defense telecommunications equipment from Chinese military companies. Contractors must represent their small business status and any socioeconomic certifications including HUBZone, WOSB, EDWOSB, or SDVOSB, and for any joint ventures, disclose the names and Unique Entity Identifiers of all parties. Compliance with employment eligibility verification, combating trafficking in persons, equal opportunity for workers with disabilities, and electronic payment submission via Wide Area WorkFlow (WAWF) is required. Invoicing must be submitted electronically using the Invoice 2in1 or separate invoice/receiving report format. The contract includes clauses for contract changes, inspection at destination, default remedies, subcontractor management, accelerated payments to small business subcontractors, and prohibition of unauthorized obligations. No pricing information is provided

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACL

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

COVER, ELECTRICAL CO

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

DUMMY CONNECTOR, RECThe contract is for the procurement of 42 units of a DUMMY CONNECTOR, REC with NSN 5935-01-258-8686, issued under solicitation SPE7M5-26-T-327N by the Department of Defense’s Active Devices Division through the Defense Logistics Agency. The item must be sourced exclusively from approved suppliers, Northrop Grumman Systems Corporation (Part Number GC829AB11) or Amphenol Corp (Part Number 10-533974-119), and delivery is required FOB origin to Cherry Point, North Carolina, with an original delivery deadline of January 21, 2027, and a need ship date of December 1, 2026. The contract specifies a fixed unit price of $42.00 per unit, totaling $1,764, with zero variance allowed in quantity. Inspection and acceptance occur at the destination under FAR 52.246-2, and all packaging must comply with MIL-STD-129 labeling and RP001 palletization standards, with hazardous materials packaged per IP025 and non-hazardous items under ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Unit of issue is each (EA), with Quantity per Unit Pack (QUP) as 001, and Item Unique Identification is not required per the service customer’s request. Compliance with numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses is mandatory, including 52.203-19 prohibiting certain confidentiality agreements, 52.204-13 requiring SAM maintenance with deviation 2026-00038, 52.213-4 for simplified noncommercial acquisitions, and 52.244-6 governing commercial subcontracting. Contractors must adhere to the Buy American Act and Berry Amendment, comply with NIST SP 800-171 cybersecurity requirements, and report trafficking in persons per FAR 52.222-50. The solicitation prohibits offers containing items produced via additive manufacturing and is not a small business set-aside, though HUBZone preferences may apply. Offerors must be registered in SAM, certified to use WAWF

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, E

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → FA9302 Aftc Pzz

Same awarding agency

Request for Information: Window Cleaning Services - 412 TENG (Bldg 2710)

Janitorial Services

POSTED

about 23 hours ago

DEADLINE

Small Business Prime Contractor for Defense Electronics ProcurementThe contract is a small business set-aside award under the NAICS code 334417 for defense electronics procurement, managed by the Department of Defense through the FA9302 AFTC PZZ office. It is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only qualified small businesses may compete, and the selected prime contractor will be responsible for full fulfillment of the procurement including subcontracting, inspection, and invoicing. Performance is required at Edwards, California, with a zip code of 93524, and responses must be submitted by the deadline of July 31, 2026 at 6:00 PM Eastern Time. The solicitation was posted on July 24, 2026, initiating a seven-day window for submission, and the contract type is structured as a subcontract within the broader defense electronics procurement framework.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Sourcing and Logistics for Defense-Grade ConnectorsThis contract involves the domestic sourcing and logistics coordination necessary to transport defense-grade connectors under FOB Destination terms to Edwards Air Force Base with a ZIP code of 93524. The work requires full end-to-end management of transportation and delivery, ensuring that all components meet stringent defense specifications and arrive at the designated military facility in compliance with federal logistics standards. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reflecting a focus on boosting small business participation in defense supply chains. The NAICS code 484220 designates this as a freight transportation arrangement, specifically for trucking and allied services used in the movement of specialized cargo. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, at 6:00 PM Eastern Time, and is managed by the Department of Defense through the FA9302 AFTC PZZ office. All deliveries must be made directly to Edwards AFB, and the contractor is responsible for end-to-end logistics including scheduling, tracking, documentation, and compliance with defense transportation protocols. The FOB Destination delivery term means ownership and risk transfer to the government only upon arrival at the specified location, placing the onus on the contractor to ensure timely, secure, and damage-free transit. The contract underscores the critical need for precision in defense logistics and prioritizes small business vendors capable of meeting the high reliability standards required for military-grade equipment.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of 187-Pin Electrical Connectors (Part# TV06DT-25-187PB)The contract calls for the procurement and delivery of ten units of a 187-pin electrical connector, specifically the PB variant, with distinctions in plating or shielding properties compared to standard models. The item is identified by part number TV06DT-25-187PB and is being procured under a subcontract classified as a Total Small Business Set-Aside, meaning only small businesses are eligible to bid. The North American Industry Classification System code is 334417, indicating the scope involves the manufacturing of electrical and electronic components. Performance of the contract is required at Edwards, California, with a zip code of 93524, and the solicitation was posted on July 24, 2026, with responses due by 6:00 PM on July 31, 2026. The contracting organization is the Department of Defense, specifically FA9302 Aftc Pzz, signaling this acquisition supports defense-related applications requiring high-reliability electrical connectivity solutions.

Electronic Connector Manufacturing

POSTED

DEADLINE

Aircraft Pin ConnectorsThis solicitation seeks commercial-grade Amphenol aircraft pin connectors under a total small business set-aside, specifically targeting part numbers TV06DT-25-187P through TV06DT-25-187SE, with ten units of each, totaling 120 connectors. The requirement is firm fixed price with a 210-day delivery window to Edwards Air Force Base, California, and is governed under FAR Part 12 for commercial items. Offerors must be registered in SAM.gov, provide a CAGE code, TIN, UEI, and detailed contractor information including warranty, payment terms, and point of contact. Technical acceptability is the first evaluation threshold, requiring full compliance with connector specifications; offers failing this are disqualified regardless of price. Past performance in dismantling, reconfiguring, and assembling similar systems is weighted higher than price, with at least two recent examples required. Price must be reasonable, unbalanced pricing may result in rejection. Offers must be submitted via email by 1:00 PM PDT on July 31, 2026, to Terence Vickers with full compliance to RFO 52.212-1 and 52.212-2, and must include complete documentation as specified. The government intends to award without discussions, so submissions must reflect the offeror’s best terms. All questions must be submitted by the same deadline and no late proposals will be accepted.

Electronic Connector Manufacturing

POSTED

DEADLINE

Monitoring System Ongoing ReportingThe contract requires ongoing monitoring and analysis of ACU1 and ACU2 systems to track energy usage, detect anomalies, and assess overall system health, with potential integration to a remote Building Automation System. Services must include continuous or periodic data collection, detailed performance reporting, and timely identification of operational issues to ensure optimal system function and efficiency. The work is to be performed at Edwards, California, with reporting deliverables expected to support energy management and maintenance decisions. This is a total small business set-aside subcontract classified under NAICS code 541690, issued by the Department of Defense under FA9302 Aftc Pzz. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026. Only small businesses qualify to bid, and the contract is intended for specialized technical services focused on system performance and energy analytics rather than hardware procurement or physical maintenance. The absence of a point of contact and full office address suggests the opportunity may require direct engagement through the SAM.gov portal for further details.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Annual Base Service Visit ExecutionThe contract entails the execution of comprehensive annual service visits focused on full preventative maintenance, detailed system inspections, and thorough reporting as part of a sustained, long-term service agreement. This recurring service model ensures continuous operational reliability and performance optimization through structured, standardized maintenance protocols conducted on an annual basis. The work is required to be performed at Edwards, California, with a specific emphasis on delivering consistent, high-quality service according to predefined technical and procedural standards. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, specifically targeting small business concerns as defined by FAR 19.5, and is classified under NAICS code 561210 for Facility Support Services. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense under the agency designation FA9302 Aftc Pzz. All work must be completed in compliance with federal contracting requirements and delivered at the designated place of performance in Edwards, CA, with no provision for alternative locations.

Facilities Support Services

POSTED

DEADLINE

HVAC System Alignment and Calibration ServicesThe contract pertains to precision alignment and calibration services for ACU1 and ACU2 units within an environmental control system, ensuring peak operational efficiency and full compliance with mission-specific environmental parameters. The work involves diagnostic testing, systematic control adjustments, and verification procedures to maintain system integrity under demanding operational conditions. All tasks must be performed in accordance with rigorous technical standards to support critical mission outcomes tied to environmental stability and system reliability. This is a small business set-aside subcontract under NAICS code 541330, awarded by the Department of Defense through the FA9302 AFTC PZZ office. The opportunity was posted on July 22, 2026, with a mandatory response deadline of August 5, 2026, and performance is required at Edwards, California, 93524. Only small businesses qualify to submit proposals, and the contract is structured as a subcontract under federal acquisition regulations governing total small business set-asides.

Engineering Services

POSTED

DEADLINE

On-Demand Technical Repair Services for HVAC SystemsThis contract seeks qualified small businesses to provide emergency and on-demand repair services for HVAC systems designated as ACU1 and ACU2, encompassing component replacement, refrigerant recovery and recharge, and comprehensive troubleshooting of system failures. The work is classified as a Total Small Business Set-Aside under SBA guidelines, ensuring exclusive eligibility for small businesses as defined by the Small Business Administration, and is assigned the NAICS code 811310 for appliance repair and maintenance. Services must be performed at Edwards, California, with a zip code of 93524, and the contract is issued under the Department of Defense through the FA9302 Aftc Pzz office. The solicitation was posted on July 22, 2026, with a formal response deadline of August 5, 2026, requiring timely submission of proposals from eligible vendors to secure the opportunity.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

HVAC Preventative Maintenance for Critical Test SystemsThe contract entails scheduled preventative maintenance for the ACU1 and ACU2 systems, with tasks including filter replacements, refrigerant level assessments, lubrication of moving components, electrical system inspections, and performance calibration to ensure uninterrupted operation of mission-critical test environments. Maintenance activities are essential to sustaining system reliability and operational readiness at the Edwards location, where the equipment supports vital defense testing functions. Work must be performed in accordance with established protocols to minimize downtime and maintain compliance with technical standards required for high-stakes aerospace applications. This is a subcontract classified under NAICS code 238220 and designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility exclusively to small business concerns. The opportunity was posted on July 22, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense through the FA9302 AFTC PZZ office. All work is expected to occur at the specified performance location in Edwards, California, with no additional details provided regarding reporting, compensation, or performance metrics beyond the scope of maintenance services.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Sound Testing IDIQThis solicitation, identified as FA930226Q0031_V2, is a Combined Presolicitation/Solicitation Request for Quote for Sound Testing Services at Edwards AFB and Nellis AFB, issued as a single award Indefinite-Delivery Indefinite-Quantity (IDIQ) contract with a five-year ordering period. The acquisition is exclusively set aside for small businesses under NAICS code 541380, with a size standard of $19,000,000, and offers must be submitted in writing via email to the designated points of contact, with a strict maximum file size of 10MB. All quotes must include complete contractor information such as SAM UEI, TIN, CAGE Code, payment terms, point of contact details, warranty, FOB Destination, delivery lead time, and pricing for all contract line items, formatted using the SF1449 form or in a separate PDF. The solicitation emphasizes that no negotiations will occur, and quotes must reflect the offeror’s best terms from both a technical and price standpoint, though the government reserves the right to request clarifications. A mandatory site visit is scheduled for July 29, 2026, with registration required by July 23, 2026, and all questions must be submitted by July 29, 2026. Quotes are due by August 4, 2026, at 9:00 AM PDT. Award will be made using a Best Value Tradeoff evaluation methodology, where Past Performance and Technical Capability, when combined, are significantly more important than Price. Technical Capability will be assessed based on test methodology, staff certifications, equipment calibration (requiring Type 1 sound measurement instruments), data analysis, and strict compliance with UFC and ASTM standards. Past Performance will be evaluated on recency, relevance to DoD or SCIF environments, and quality of prior work. The contract includes a mandatory Cybersecurity Maturity Model Certification (CMMC) Level 1 requirement, as clarified in Amendment #1 issued on July 22, 2026, ensuring contractors can safeguard Federal Contract Information in accordance with NIST SP 800-171 basic cybersecurity practices. The period of performance will span five years from the date of award, with inspection and acceptance occurring at the places of performance—primarily Edwards AFB and Nellis AFB—and conducted by the Government.

Testing Laboratories and Services

POSTED

DEADLINE

ACU1 and 2 Alignment and Preventative MaintenanceThis solicitation, FA930226Q0083, seeks commercial services for the alignment and preventative maintenance of Air Conditioning Unit 1 and Air Conditioning Unit 2 located at Edwards Air Force Base, Building 1030, supporting the 772TS/EWOX mission. The contract is structured as a five-year Firm Fixed Price arrangement with a base year and four optional one-year periods, all performance to occur on-site at Edwards AFB, California. The acquisition is a 100% Small Business Set-Aside under NAICS code 811310, with a size standard of $12,500,000 in annual receipts, and is being procured using Simplified Acquisition Procedures under the revised FAR effective February 1, 2026. Offerors must submit a completed SF1449 form along with a separate PDF quote containing full pricing for all contract line items, contractor information including SAM UEI, TIN, CAGE Code, payment terms, warranty details, FOB destination, technical approach, and offer expiration date. Quotes are limited to 10MB and must be emailed to two designated points of contact; no oral submissions or files exceeding the size limit will be accepted. A mandatory site visit is scheduled for July 30, 2026, with registration required by July 24, 2026. Proposals are due by 5:00 PM PDT on August 4, 2026, and awards will be made without negotiation, based on best value determined through a three-factor evaluation: Technical Acceptability is mandatory and evaluated on a pass/fail basis, with Price being the next decisive criterion, followed by Past Performance of three most recent, relevant projects. The Government will use Wide Area WorkFlow for invoicing, and contractors must comply with mandatory clauses including those related to cybersecurity, labor standards under the Service Contract Act WD 2015-5603, prohibitions on certain foreign equipment, whistleblower protections, and personal identity verification. Contract awards are contingent solely on the availability of funds, and no work may commence until a fully executed contract is received.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE