Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of 2.5" x 50' Fuel Hoses with Camlock Fittings

Active

Federal

Response Deadline08/05/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement of 16 fuel transfer hoses, each measuring 2.5 inches in diameter and 50 feet in length, equipped with MXF AL Camlock fittings and stainless steel crimp sleeves, specifically for operational use at Naval Station Mayport. These hoses are designed for reliable and safe fuel transfer in high-demand maritime environments, with the specified fittings and sleeves ensuring secure, leak-proof connections and durability under rigorous conditions. The requirement is issued as a subcontract under a Small Business Set Aside, fully reserved for small businesses, and is classified under NAICS code 332913 for other fabricated metal product manufacturing. The solicitation was posted on July 30, 2026, with a response deadline of August 5, 2026, at 2:00 PM ET, indicating a tight turnaround for interested bidders. Performance of the contract will be centered at Jacksonville, Florida, with a zip code of 32228, aligning with the logistical footprint of the Naval Sea Systems Command. The contracting activity originates from the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense, emphasizing the federal and mission-critical nature of the procurement. Although no point of contact is listed, the opportunity is publicly accessible via the SAM.gov portal for registered small business contractors to submit proposals.

General Info

Procure 16 fuel hoses with MXF fittings for Naval Station Mayport under small business set-aside.

Agency

Department Of Defense → Navsup Flt Logistics Ctr JacksonvilleView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

Jacksonville, FL, 32228, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 02:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement of 16 units of 2.5-inch diameter, 50-foot-long fuel transfer hoses with MXF AL Camlock fittings and stainless steel crimp sleeves for use at Naval Station Mayport.

Similar Contracts

Same NAICS industry code

Supplier of Valves, Fittings, and HydrantsCarbon County in Pennsylvania is seeking a supplier to provide valves ranging from 4 inches to 12 inches, associated fittings, and 8-inch by 6-1/2-inch fire hydrants, all of which must comply with American Water Works Association and NSF standards to ensure quality and safety for public water systems. The opportunity is structured as a subcontract and was posted on July 30, 2026, with responses due by August 26, 2026, at 4:00 PM. The North American Industry Classification System code for this procurement is 332913, indicating it pertains to other fabricated metal product manufacturing, consistent with the production of water distribution components. Performance of the contract will take place within Carbon County, and while no specific point of contact or detailed address is provided, interested parties can access further information through the Pennsylvania bidding portal.

POSTED

DEADLINE

Supply of Corrosion-Resisting Valve Seat (NSN: 4820012825100)Five units of a corrosion-resisting valve seat, identified by NSN 4820012825100, are required to be supplied and delivered in full compliance with military specifications. The delivery destination is DLA Tracy at the address 95304-5000, and all invoicing and acceptance procedures must adhere strictly to WAWF requirements to ensure seamless payment and documentation. The contract is structured as a subcontract with a response deadline of August 10, 2026, and was posted on July 30, 2026. The North American Industry Classification System code 332913 applies, indicating the work falls under other fabricated metal product manufacturing. The contracting organization is the Department of Defense through DLA San Joaquin, with no set-aside designation specified. Full compliance with technical and procedural standards is mandatory for successful performance and payment.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Pipe Elbow Supply and Packaging for Defense Logistics

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Valve Manufacturing & SupplyThe contract calls for the manufacture and supply of 15 ball-type bleeder valves identified by NSN 4820011210846, ensuring compliance with military specifications to meet operational requirements. The work is to be performed under a subcontract arrangement, with the place of performance designated as Tracy, California, with a ZIP code of 95304-5000. The solicitation falls under NAICS code 332913, which corresponds to other fabricated metal product manufacturing, indicating the specialized nature of the valve production needed. The posting date was July 30, 2026, and responses must be submitted by August 10, 2026, allowing potential vendors a limited window to prepare and submit proposals. Although no specific point of contact is listed, the awarding organization is the DLA Dist San Joaquin, part of the Department of Defense, signaling the critical nature of the components for defense applications.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Ball Valve Supply (Commercial Off-The-Shelf Item)The contract involves the supply of eight commercial off-the-shelf ball valves identified by NSN 4820017320362, to be delivered to the DDSP New Cumberland facility in Pennsylvania with a zip code of 17070-5002. Each valve must be packaged and labeled in full compliance with MIL-STD-129 standards, ensuring proper identification, handling, and traceability for military logistics. The procurement is classified as a subcontract under NAICS code 332913, which pertains to other metal valve and pipe fitting manufacturing, and is issued by the Department of Defense through the DDSP New Cumberland Facility. Responses are due by August 10, 2026, following a solicitation posted on July 30, 2026, with all deliveries required to meet the specified packaging and delivery conditions without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4755

The contract solicitation SPE8E8-26-T-4755 is for the procurement of 200 flush valves under a Women-Owned Small Business set-aside, with a NAICS code of 332913 and a delivery requirement of 75 days after date of order to the DDSP New Cumberland Facility in New Cumberland, PA. The item is identified by NSN 4510-01-579-3370, and pricing details are incomplete in the solicitation, with no unit or extended price specified for CLIN 0001. The procurement falls under simplified acquisition procedures, and compliance with the DLA Master List of Technical and Quality Requirements governs all technical and quality specifications, superseding ASTM D3951 where applicable. Packaging and marking must adhere to RP001 and MIL-STD-129, including barcoding per specifications, with hazardous materials labeled under OSHA’s Hazard Communication Standard. Delivery is FOB Origin under the First Destination Transportation program, and acceptance occurs at the destination by government personnel. All invoices must be submitted electronically via Wide Area WorkFlow, with no alternative methods permitted. The contract incorporates numerous FAR and DFARS clauses related to equal opportunity, cybersecurity, safeguarding defense information, whistleblower rights, subcontractor payment acceleration, and prohibition of covered telecommunications equipment. Special requirements include compliance with NIST SP 800-171 for information security, mandatory reporting of cyber incidents under DFARS 252.204-7012, and advance notification for any radioactive materials delivery. Contractors must disclose Unique Entity ID and CAGE code if providing covered defense telecommunications equipment and are required to affirm their WOSB status in SAM. No formal attachments are included beyond referenced standards, and evaluation factors for award are not specified in the solicitation. The response deadline is August 4, 2026, and submissions must be made through the DIBBS portal. The contracting officer has not yet finalized the contract type, and payment information, DoDAAC, and point of contact details will be provided upon award.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4921

The contract pertains to the procurement of a single floor drain with NSN 4510-01-519-7819 under purchase request 7017673583, requiring delivery within 20 days of award. The solicitation number is SPE8E8-26-T-4921, issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 10, 2026, and a posted date of July 30, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which are incorporated by reference and must be accessed via the official DLA eProcurement website. For this simplified acquisition, the version of the master list effective on the solicitation issue date or award date applies. The item is to be delivered to Virginia Beach, Virginia, with a ZIP code of 23459-9309, and the primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided. All supplies must comply with DLA packaging requirements and include procedures for removal of government identification from non-accepted items.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-159Y

This contract pertains to the procurement of 264 units of a wheel-mounted crane component identified by NSN 4820004123525 and part number 281924N, issued under solicitation SPE7MC-26-T-159Y as a Service-Disabled Veteran-Owned Small Business Set-Aside. The item must be delivered FOB origin within 146 days of contract award, with no variance permitted in quantity, and is subject to inspection and acceptance at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The delivery destination is DLA Distribution Red River, Receiving Building 499 in Texarkana, TX, with a required ship date of January 4, 2027, matching the original delivery deadline. Pricing is fixed at $264.00 per unit, totaling $69,696, and the unit of issue is each (EA). The contract references specific manufacturer part numbers and enforces federal procurement compliance through DLA’s standardized procedures and transportation guidelines.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Tube Elbow SupplyThe contract is for the supply of a tube elbow, identified by NSN 4730-01-546-8846, as a critical component within a fluid delivery system. This is a subcontract awarded under a Small Business Set Aside designation, specifically reserved entirely for small businesses, with the North American Industry Classification System code 332913 indicating the primary industry is other metal product manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 4, 2026 at 7:00 PM. The contracting activity is under the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense, though specific performance location and point of contact details are not provided. The work involves delivering a standardized military fluid system part, and all compliance with technical, quality, and delivery requirements tied to the NSN must be met as specified in the solicitation.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Supply and Installation of 4-inch Type-304L Stainless Steel Camera TubeThe contract requires the furnish and installation of a 4-inch inner diameter Type-304L stainless steel camera tube totaling 232 linear feet, specifically for use in well inspection and monitoring applications. The material specification ensures corrosion resistance and durability suitable for long-term subterranean or harsh environmental conditions, with the installation scope encompassing proper placement and secure integration into the existing well infrastructure. The work is governed under a subcontract arrangement with a NAICS code of 332913, indicating it falls within the Other Fabricated Metal Product Manufacturing category, typically involving precision fabrication and assembly of custom metal components. The solicitation was posted on July 29, 2026, and responses must be submitted by September 1, 2026, at 5:00 PM. The contracting entity is the Public Works Department of the City of Newport Beach in California, and the place of performance is within the jurisdiction of this agency, though exact site details are not specified. Bidders must be prepared to meet stringent material and installation standards to ensure the camera tube functions reliably in underground monitoring systems, with compliance to industry best practices for stainless steel piping systems assumed as part of the technical requirements. All proposals must be submitted through the designated online portal prior to the deadline.

Public Works Department of City of Newport Beach

POSTED

DEADLINE

in about 1 month

Supply and Installation of 2-inch Type-304L Stainless Steel Sounding TubeThe contract calls for the supply and installation of a 2-inch inner diameter Type-304L stainless steel sounding tube, totaling 212 linear feet, to be used for well monitoring purposes. The material specification requires Type-304L stainless steel, known for its corrosion resistance and suitability for long-term subsurface applications, ensuring durability and reliability in environmental monitoring scenarios. The work involves both furnishing the specialized tubing and its proper installation, indicating a turnkey responsibility for the vendor to deliver, handle, and mount the system according to technical and safety standards. Issued as a subcontract under NAICS code 332913, which categorizes metal fabricated product manufacturing, the solicitation is managed by the Public Works Department of the City of Newport Beach in California. The opportunity was posted on July 29, 2026, with a firm deadline for responses set for September 1, 2026, at 5:00 PM. The contract does not specify a set-aside designation, and no point of contact or detailed place of performance information is provided beyond the jurisdictional authority. Interested parties must review the detailed requirements through the provided online portal to ensure full compliance with technical, scheduling, and documentation expectations.

Public Works Department of City of Newport Beach

POSTED

DEADLINE

in about 1 month

Precision Fluid Valve Supply and PackagingThe contract demands the supply, packaging, labeling, and palletization of precision fluid valves identified by NSN 4820011760528, ensuring full compliance with Department of Defense Logistics Agency standards, ASTM specifications, and MIL-STD military requirements. All work must meet rigorous quality and documentation protocols to guarantee operational readiness and interoperability. The finished units are destined for shipment to Germany, requiring adherence to international transportation norms and defense-specific handling procedures. Subcontracted performance is governed by a tight timeline, with responses due by August 10, 2026, following a July 28, 2026 posting date. The North American Industry Classification System code 332913 identifies the nature of the work as other miscellaneous fabricated metal product manufacturing. The contract is managed under the Maritime Supply Chain division of the Department of Defense, and while specific performance locations and point of contact details are not provided, all activities must align with DLA logistics frameworks and ensure end-to-end traceability from production to delivery.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

Same awarding agency

Shipping and Delivery of Fuel Transfer Hoses to Naval Station MayportThe contract requires the transportation and final delivery of fuel transfer hoses to Naval Station Mayport in Jacksonville, Florida, under FBO Destination terms, meaning the supplier is responsible for all logistics up to the designated delivery point, including coordination with government inspection processes to ensure compliance and acceptance. The delivery must be completed in accordance with military standards and timelines, with the supplier bearing full accountability for timely arrival and proper handling of the cargo. This effort is part of a Small Business Set Aside under NAICS code 484220, indicating it is exclusively available to qualified small businesses, and is managed by the Naval Supply Systems Command Fleet Logistics Center Jacksonville, a component of the Department of Defense. All proposals must be submitted by the response deadline of August 5, 2026, and the contract is structured as a subcontract, suggesting it supports a larger procurement or operational requirement within the naval logistics chain.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of 4" x 50' Uncoupled Fuel HosesThe contract requires the supply of eight units of 4-inch diameter, 50-foot-long uncoupled Type A fuel transfer hoses designed for aviation or high-pressure fuel transfer applications. These hoses must meet strict performance and safety standards to ensure reliable operation in demanding environments where fuel integrity and pressure resistance are critical. The solicitation is issued as a subcontract under a Small Business Set Aside classification, reserving the opportunity exclusively for small businesses as defined by the SBA. The NAICS code 326220 indicates the work falls under the manufacturing of plastic pipe and pipe fittings, suggesting the contractor must have capabilities in producing or sourcing compliant rubber or synthetic hose assemblies meeting industry-specific requirements. The contract was posted on July 30, 2026, with a response deadline of August 5, 2026, at 2:00 PM Eastern Time. Performance is expected to be carried out in Jacksonville, Florida, with the purchasing entity being the Naval Supply Systems Command Fleet Logistics Center Jacksonville, under the Department of Defense. While no specific point of contact is listed, all proposals must be submitted through the SAM.gov portal using the provided link by the stated deadline. Compliance with all technical specifications, timelines, and small business eligibility criteria is mandatory for consideration.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Fuel Transfer Hoses

Solicitation # N6883626Q0055

The contract solicitation titled Fuel Transfer Hoses, identified by solicitation number N6883626Q0055, is a Small Business Set Aside issued by the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense. The requirement is classified under NAICS code 326220 and is exclusively reserved for small businesses, with all awards expected to go to qualified small business concerns. The solicitation was posted on July 30, 2026, and responses must be submitted no later than August 5, 2026, at 2:00 PM Eastern Time. The place of performance is in Jacksonville, Florida, with the contracting office located at 32212-0097. Primary point of contact for questions and correspondence is Quentin Keaton, with secondary support provided by Rhonda Davis; both can be reached via official Navy email addresses. Information regarding detailed technical specifications, delivery requirements, and evaluation criteria is contained within the attached RFQ and DOR documents, which must be downloaded and reviewed by potential offerors. The opportunity is accessible online through the SAM.gov portal for registered vendors.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Operator Training ServicesThe contract requires the provision of initial and ongoing training for government food service personnel on the proper operation and basic maintenance of dishwashing machines. Training must be delivered to ensure personnel are fully capable of safely and effectively using the equipment, with an emphasis on daily operational procedures, troubleshooting common issues, and performing routine maintenance tasks to promote longevity and efficiency. The training program must be adaptable to meet evolving needs and available to personnel across the designated performance location. The work is scoped under a subcontract with a NAICS code of 611519, indicating it relates to other services for professional and technical training. The opportunity was posted on July 24, 2026, with responses due by August 17, 2026. Performance is to take place in Panama City, and the contracting organization is the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense. There is no set-aside designation specified, and the contract is not limited to specific types of small businesses or other categories. All training activities must align with government standards and be delivered in a manner that ensures consistent, reliable operation of dishwashing equipment in support of food service operations.

Other Technical and Trade Schools

POSTED

DEADLINE

Repair and On-Call Service SupportThe contract requires provision of emergency repair services for dishwashing machines with a guaranteed response time of no more than 48 hours from the time of service request. All necessary parts, labor, and travel expenses are included in the scope of work, except for damages resulting from negligence by the Government. The services are to be performed at the designated location in Panama City, with the contractor responsible for ensuring timely and effective restoration of equipment functionality. This is a subcontract under the North American Industry Classification System code 811310, issued by the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Proposals must be submitted by the deadline of August 17, 2026, and the opportunity was posted on July 24, 2026, with no set-aside provisions specified.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Preventative Maintenance ServicesPreventative maintenance services are required for a leased dishwashing machine, with all work to be performed in strict alignment with the manufacturer's guidelines to ensure optimal performance and longevity. Services must be scheduled strategically to avoid any interruption during peak meal periods, maintaining uninterrupted operations for the facility. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense. The work is to be performed in Panama City, and responses are due by August 17, 2026, with the solicitation posted on July 24, 2026. All maintenance activities must prioritize operational continuity and compliance with technical specifications without impacting daily service delivery.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Commercial Dishwashing Machine Supply and InstallationThe contract calls for the supply, delivery, and installation of a commercial-grade, NSF-certified dishwashing machine at a Department of Defense facility in Panama City. The scope includes full integration with existing water, power, and drainage systems, ensuring the equipment is operational and compliant with health and safety standards. All installation debris must be removed and properly disposed of upon completion. The work is classified as a subcontract under NAICS code 238220, which pertains to building equipment contractors. The opportunity was posted on July 24, 2026, with responses due by August 17, 2026, and is managed by Naval Supply Systems Command Fleet Logistics Center Jacksonville. The place of performance is specified as Panama City, with no other location or set-aside designation provided.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Dishwashing Machine Lease and Maintenance, NSA Panama City, FL

Solicitation # N6883626Q0056

The U.S. Navy is soliciting quotes for the lease and maintenance of dishwashing machines at Naval Support Activity in Panama City, Florida, under solicitation number N6883626Q0056. This unrestricted opportunity, posted on July 24, 2026, requires responders to provide comprehensive services including equipment leasing and ongoing maintenance to ensure operational readiness. The North American Industry Classification System code for this requirement is 532210, indicating it falls under commercial and industrial machinery and equipment rental and leasing. Proposals must be submitted by August 17, 2026, at 8:00 PM Eastern Time, with all details outlined in the attached Request for Quote and supporting documents. The contract is managed by the Naval Supply Systems Command Fleet Logistics Center in Jacksonville, Florida, with the office located at 32212-0097. Performance of the work is specifically required at the Panama City, Florida installation. Primary point of contact for inquiries is Dawn Bonner, with secondary support provided by Harold Melton, both reachable via official Navy email addresses. Interested parties must review the full solicitation materials via the provided SAM.gov link to understand technical specifications, service expectations, evaluation criteria, and submission requirements, as failure to comply with all attachments or instructions may result in proposal rejection.

Consumer Electronics and Appliances Rental

POSTED

DEADLINE

Quality Inspection and Testing Services for Window AssemblyThe contract awarded by the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense seeks independent testing and quality validation services for a Heated Window Assembly, focusing on thermal, structural, and environmental performance verification. The work is to be performed at a designated location in Jacksonville, Florida, with the NAICS code 541380 indicating that the services fall under other professional, scientific, and technical services, specifically engineering services related to testing and inspection. The contract is classified as a subcontract and was posted on July 13, 2026, with no set-aside designation specified, meaning it is open to all qualified providers regardless of size or socioeconomic status. The scope of work requires rigorous, third-party validation to ensure the window assembly meets stringent military performance standards under realistic operational conditions, including exposure to extreme temperatures, mechanical stress, and environmental factors such as humidity, salt spray, and vibration. All testing protocols must be thorough, documented, and aligned with applicable defense specifications to confirm reliability and safety in field deployment.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Metal Framing and Housing FabricationThe contract involves the fabrication of precision metal frames and enclosures specifically designed for the Heated Window Assembly, ensuring the components meet exacting standards for structural integrity and seamless integration into naval vessel systems. The work requires advanced manufacturing capabilities to produce components that are compatible with the demanding environmental and operational conditions of naval platforms, with strict attention to dimensional accuracy, material specification, and durability. The frames and housings must be engineered to support heating functionality while maintaining mechanical stability under vibration, thermal cycling, and corrosive sea exposure. Performance of the work is designated to take place in Jacksonville, Florida, with the contract issued under the NAICS code 332323 for fabricated metal product manufacturing. This is a subcontract arrangement within the Department of Defense procurement ecosystem, administered by Naval Supply Systems Command Fleet Logistics Center Jacksonville. The contract was posted on July 13, 2026, and the technical requirements reflect critical support for naval fleet readiness, where component reliability directly impacts crew safety and operational effectiveness. All deliverables must align with applicable military specifications and undergo rigorous quality verification prior to acceptance.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Electrical Heating Element Supply for Window AssemblyThe contract involves the manufacture and supply of custom electrical heating circuits specifically engineered for integration into the Heated Window Assembly with part number CC-10367-1. These heating elements must meet precise technical specifications to ensure reliable performance under operational conditions, with delivery and installation targeted for use in defense-related applications. The work is classified under NAICS code 335999, indicating it falls under other electrical equipment and component manufacturing, and is structured as a subcontract under the Department of Defense. Performance of this contract is centered in Jacksonville, Florida, with a zip code of 32228, where the heated window assemblies will be deployed as part of naval supply and logistics operations managed by the Naval Supply Systems Command Fleet Logistics Center Jacksonville. The contract was posted on July 13, 2026, and is part of ongoing efforts to modernize and maintain mission-critical window systems requiring consistent and efficient thermal regulation. While details about set-asides or specific procurement restrictions are not indicated, the involvement of a DoD agency underscores the need for strict compliance with defense contracting standards and quality assurance protocols.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Tempered, Heated Glass Fabrication for Aerospace WindowThe contract involves the fabrication of precision tempered glass with integrated heating capability for use in the Heated Window Assembly identified by Part No. CC-10367-1, specifically for aerospace applications. The work is scoped under a subcontract with a NAICS code of 327215, indicating classification within the glass product manufacturing industry, and is tied to the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Performance of the contract is designated to occur in Jacksonville, Florida, with a zip code of 32228, and the solicitation was posted on July 13, 2026. The heated glass component must meet stringent aerospace standards for durability, optical clarity, and thermal performance under extreme environmental conditions. As a subcontract, the primary contractor is expected to manage compliance, quality assurance, and delivery timelines aligned with DoD requirements, though no set-aside type or specific point of contact is detailed. The contract supports critical defense systems requiring reliable window assemblies that maintain functionality through icing, temperature fluctuations, and high-stress operational environments. Execution will require advanced manufacturing techniques to integrate heating elements into tempered glass without compromising structural integrity or optical performance.

Glass Product Manufacturing Made of Purchased Glass

POSTED

DEADLINE