Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Supply of 316L Stainless Steel Bar Stock

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement and delivery of 341 linear feet of 1.000-inch diameter 316L stainless steel bar stock, to be supplied in individual lengths between 10 and 12 feet, with all material in an annealed condition to ensure optimal mechanical properties and corrosion resistance. Full heat lot traceability is mandatory, along with the provision of comprehensive mill certifications to verify material composition, mechanical characteristics, and compliance with ASTM or equivalent standards for 316L stainless steel. The specification demands strict adherence to material quality control protocols to support high-integrity applications, particularly within defense or critical infrastructure environments. This subcontract is issued under the NAICS code 331110, indicating a primary focus on steel mill products manufacturing, and is managed by the Department of Defense through its CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, giving suppliers a one-week window to submit proposals. All deliveries must meet exact dimensional, chemical, and certification requirements, and the place of performance is unlisted, suggesting flexibility in shipping destination, though final destination will likely align with U.S. military maintenance or construction needs. The contract is accessible via the DIBBS platform for further reference and submission.

General Info

Procure 341 linear feet of 1.000-inch 316L stainless steel bar, annealed, with full traceability and mill certifications for defense applications.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procure and deliver 341 linear feet of 1.000-inch diameter 316L stainless steel bar stock in 10–12 foot lengths, annealed, with full heat lot traceability and mill certifications.

Similar Contracts

Same NAICS industry code

NAICS: 331110
New
DIBBS
Raw Material Supply – Alloy Steel or Carbon Steel BlanksThe contract requires the supply of certified alloy or carbon steel bars, billets, or pre-cut blanks engineered for precision machining into military-spec solid disks, with stringent requirements for full material traceability throughout the production and delivery chain. All materials must meet exacting technical and quality standards to ensure compatibility with defense-grade manufacturing processes, and suppliers must document and maintain complete records of chemical composition, heat treatment, mechanical properties, and origin at every stage. The items must be suitable for high-volume machining operations that produce critical components for military applications, and compliance with relevant military specifications is non-negotiable. This subcontract is issued under NAICS code 331110 by the Department of Defense through the LAND SUPPLY CHAIN office, with performance location set at NEW CUMBERLAND, PA, ZIP 17070-5002. Bids must be submitted by July 31, 2026, following the posted solicitation on July 20, 2026. Although no set-aside designation is specified, participation is open to qualified vendors capable of meeting the demanding certification, traceability, and delivery timelines. The contract underscores the need for reliable, auditable supply chain integrity and emphasizes zero tolerance for material deviations or documentation gaps, as the end-use components are integral to defense systems requiring consistent performance under extreme conditions.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331110
New
DIBBS
Domestic Raw Material Supply for Fastener ProductionThe contract seeks the supply of domestically sourced alloy or stainless steel specifically for the manufacturing of self-locking nuts, ensuring full compliance with the Berry Amendment and the Buy American Act. All materials must originate entirely within the United States, from raw material extraction through final production, to meet stringent federal requirements for defense-related procurement. The materials will be used in the production of fasteners critical to military and defense applications, requiring strict adherence to quality, traceability, and sourcing standards. This subcontract is a total small business set-aside under the SBA program, reserving the opportunity exclusively for small businesses as defined by the SBA size standards for NAICS code 331110, which covers iron and steel mills and fermentation plants. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and performance will be centered at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and interested parties must submit proposals through the DIBBS portal to be considered for award.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331110
New
DIBBS
Specialty Metals Compliance & SupplyThe contract requires the supply or verification of specialty metals used in the production of bushings, with strict adherence to DFARS 252.225-7008 regulations to ensure all materials are sourced exclusively from approved countries. Full traceability of the metals from origin through delivery is mandatory, confirming compliance with U.S. national security and defense procurement standards. The work is classified as a subcontract under NAICS code 331110, indicating involvement in steel mill and steel product manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Performance is tied to defense-related requirements with no specified geographic location for execution, emphasizing quality control and regulatory fidelity over logistics parameters. The contract was posted in July 2026 and is linked directly to specific award and delivery records under the DIBBS system.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Specialty Metal and Material Sourcing (Domestic-Compliant Supply)The contract pertains to the sourcing of DFARS-compliant specialty metals including tantalum, tungsten, and specialty steel for use in the production of DASHPOT components, ensuring adherence to U.S. domestic content requirements under the Defense Federal Acquisition Regulation Supplement. The materials are required to meet stringent regulatory standards to support defense-related manufacturing, with compliance verified throughout the supply chain to satisfy Department of Defense mandates. The subcontract is issued under NAICS code 331110, indicating classification within the iron and steel mills and ferroalloy manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. All materials must be sourced, processed, and fabricated entirely within the United States or its possessions to comply with DFARS restrictions on foreign-origin content, making domestic sourcing a non-negotiable requirement. The contract is structured as a subcontract, implying the awardee provides materials to a prime contractor or higher-tier supplier operating within the defense industrial base. The absence of specific place of performance details or point of contact suggests logistical coordination will be handled directly between the parties, with oversight administered through DLA systems. The posting date of July 20, 2026, indicates this is a future-facing procurement, likely part of long-term planning to secure critical material streams for defense systems.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Raw Material Supply for Metal Coupling ComponentsThe contract involves the supply of certified high-strength alloy or stainless steel bar stock and forgings specifically intended for the manufacturing of flexible shaft couplings that meet stringent military material standards. The materials must be produced to exacting specifications to ensure compatibility with defense-grade applications, emphasizing durability, performance under extreme conditions, and full compliance with required military certifications. The product is a critical component in mechanical systems used by the Department of Defense, and the material must be traceable, tested, and documented to verify adherence to industry and regulatory benchmarks. This is a subcontract under the Defense Logistics Agency, categorized under NAICS code 331110 for steel mill and iron foundry operations, and is posted for potential suppliers to respond to the needs of the Department of Defense procurement chain. The materials are to be delivered to designated locations as required by end-use manufacturing processes supporting military equipment. While no specific set-aside or small business preference is indicated, the contract demands rigorous quality control, precise material composition, and reliable fulfillment timelines to ensure uninterrupted production of mission-critical coupling components.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
High-Performance Material Supply (Superalloys or Composites)The contract entails the supply of high-performance raw materials, including nickel-based superalloys, titanium, and advanced composites, specifically for the production of aerospace components critical to defense applications. These materials are essential for manufacturing parts that operate under extreme thermal and mechanical stress, ensuring the structural integrity and performance of high-end aerospace systems. The agreement is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 331110 indicating primary activity in iron and steel forging and rolling. Performance will occur across unspecified locations, though the materials are destined for use in defense-related aerospace manufacturing. The contract was posted on July 20, 2026, with no set-aside preferences designated, and is accessible through the DIBBS portal for award and delivery tracking under contract SPE4A120G0002 and delivery order SPE4A526F1078.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Supply of High-Yield Strength Quenched and Tempered Steel Plate (HY-80)The contract entails the supply and delivery of one unit of HY-80 alloy steel plate, specifically 2 inches thick, 84 inches wide, and 240 inches long, with a primer coating and processed through quenching and tempering to meet high-strength structural requirements. This material is designated for use at the Pearl Harbor Naval Shipyard, indicating its critical role in naval vessel maintenance or construction. The steel conforms to industry standards for high-yield strength applications and is sourced under a subcontract tied to the Department of Defense, managed by the Defense Logistics Agency. The NAICS code 331110 confirms the classification under the iron and steel manufacturing sector, underscoring the specialized nature of the product and its alignment with defense supply chain protocols. Although the solicitation number and precise delivery location are not provided, the contract is publicly accessible via a DIBBS portal link, ensuring transparency and traceability for procurement compliance.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Raw Material Supply for Aerospace FastenersThe contract obligates the supplier to provide high-grade alloy or stainless steel bar stock specifically engineered for the precision machining of aerospace fasteners compliant with NAS623 specifications. All material must meet stringent quality standards and include full material traceability from origin through final delivery, ensuring every batch can be verified for composition, heat treatment, and mechanical properties. The supply is intended to support critical aerospace applications where dimensional accuracy, stress resistance, and reliability are non-negotiable. This is a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331110 for steel mills and ferroalloy manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with the rigorous compliance and documentation requirements typical of defense contracting. While the place of performance and point of contact are unspecified, the contract is linked to a DLA award system and requires adherence to federal procurement protocols, including quality assurance protocols and delivery schedules dictated by aerospace industry norms.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Specialty Metals SupplierThe contract pertains to the supply of components or raw materials requiring specialty metals such as steel, nickel, and titanium alloys, which must be melted or produced in the United States or in countries qualifying under the Defense Federal Acquisition Regulation Supplement. This requirement ensures compliance with domestic sourcing mandates for defense-related materials. The contract is structured as a subcontract under the North American Industry Classification System code 331110, which aligns with the iron and steel mill and steel product manufacturing sector, indicating the nature of the materials being procured. The agency responsible is the Defense Logistics Agency within the Department of Defense, reflecting the defense-focused nature of the procurement. The solicitation was posted on July 20, 2026, and the contract is identified by the award number SPE4A623D5946 with a delivery order SPE4A626F256V. Although no specific place of performance or point of contact is listed, the requirement implies that suppliers must demonstrate origin compliance for all specialty metals used in the delivered goods. The absence of a set-aside designation suggests the contract is open to all qualified vendors meeting DFARS compliance, with no preference given to small businesses or other categories. The contractual obligation centers strictly on material origin, making adherence to the specified metallurgical sourcing standards the primary condition for award and performance.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 331110
New
DIBBS
Raw Material Supply (Alloy Steel for Roller Chain)The contract calls for the supply of alloy steel bar stock or precision tubing specifically engineered for use in roller chain components, with strict adherence to the military specification MIL-C-47041. All materials must provide full traceability back to原始 mill certifications and heat lot numbers to ensure material integrity and compliance with defense-grade standards. The procurement is structured as a subcontract under the NAICS code 331110, indicating involvement in the steel milling and rolling industry, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, with bidders expected to meet rigorous quality and documentation requirements to qualify for award.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 331110
New
DIBBS
BAR, METALThe contract specifies the procurement of 8 feet of aluminum alloy 6061 in T-651 temper, supplied in round rolled bars with a 5.250 inch diameter, delivered in whole-foot lengths of 10, 11, or 12 feet, with a permitted quantity variance of plus or minus 10 percent. All material must conform to technical standards including SAE AMS4117M, ASTM B666/B666M-20, and ASTM B660-23, and require a Certificate of Quality Compliance, or mill certification, included with each shipment and submitted to the DLA Troop Support Contracting Officer. Strict marking requirements mandate that each unit be labeled with the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, using approved methods such as stamping or stenciling without contamination or degradation of the material. Adhesive labels are mandatory for smaller diameter bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging guidelines, including preservation per ASTM B660 and marking as per MIL-STD-129R, with special codes ZZ applied where applicable. Delivery is FOB origin to Tracy, California, with a required delivery date of September 23, 2026, and an actual delivery order date of 167 days. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared; failure to comply may constitute an unauthorized substitution subject to criminal and civil penalties. Supplier qualification under the QSL program waives the need for government inspection, with quality conformance assured through the QSLD listing. Continuous identification and compliance with CDRL-METALSCERT are mandatory, and all documentation must align with the DLA Master List of Technical and Quality Requirements.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 331110
New
DIBBS
Domestic-Origin Material Supply (Bearing Components)The contract requires the supply of raw materials and sub-components, including steel rings, balls, cages, and lubricants, that originate from the United States, its outlying areas, or Canada, with the explicit condition that over 50 percent of the total component cost must comply with DFARS 252.225-7016, ensuring domestic sourcing for bearing components. This subcontract is focused on fulfilling defense-related procurement standards by prioritizing materials with verifiable origin in eligible regions, thereby supporting national security and regulatory compliance goals. The solicitation is issued under the NAICS code 331110, corresponding to steel rolling and drawing, and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is designated as Albany, Georgia, with a response deadline of July 27, 2026. The opportunity was posted on July 19, 2026, and bidders must ensure all materials meet the specified origin requirements to qualify. All submissions must adhere to the terms outlined in the DFARS clause to secure award consideration.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326220
New
DIBBS
Fibrous Rope Supply (2750 FT/Coil) – CLIN 0001 & 0002The contract requires the supply of fibrous rope in 2750-foot coils, fully compliant with military packaging, labeling, and traceability standards for delivery to the Defense Logistics Agency. A total of 43 coils are to be delivered, split between two contract line item numbers: 8 coils under CLIN 0001 and 35 coils under CLIN 0002. All items must meet stringent military specifications to ensure suitability for defense operations, with strict adherence to documentation and identification requirements for full traceability throughout the supply chain. The solicitation was posted on July 20, 2026, with proposals due by July 27, 2026, and is classified as a subcontract under NAICS code 326220, which pertains to other plastics product manufacturing. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I office, with performance and delivery requirements centered on DLA logistics operations.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details