Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of 4130 Hardened and Tempered Steel Bars

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense in San Diego, involves the supply of 73 total feet of hot rolled, round, hardened and tempered 4130 steel metal bars. The required materials must have a diameter of 1.250 inches, be provided in lengths between 10 and 12 feet, and maintain a weight of 4.170 LB/FT. These supplies are intended for prime contractors operating under DLA Troop Support supply contracts. To ensure quality and compliance, the provider must hold a QSDL listing for FSGs 95 and 96 and provide Mill-Material Certification. All shipments must be packed according to ASTM A700, MIL-STD-129, and MIL-STD-2073-1E standards. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 423510.

General Info

DoD subcontract for 73 feet of 4130 steel bars for prime contractors.

Agency

Department Of Defense → SAN DIEGO

NAICS

423510 - Metal Service Centers and Other Metal Merchant Wholesalers

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0080.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SAN DIEGO

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SAN DIEGO

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies hot rolled, round, hardened and tempered 4130 steel metal bars for prime contractors on DLA Troop Support supply contracts. Provides bars with 1.250 inch diameter in 10 to 12 foot lengths at 4.170 LB/FT. Requires QSDL listing for FSGs 95 and 96 and Mill-Material Certification. Packs per ASTM A700, MIL-STD-129, and MIL-STD-2073-1E. Delivers 73 total feet of certified steel bars.

Similar Contracts

Same NAICS industry code

Specialized Metal Stock SupplyThis subcontract for Specialized Metal Stock Supply involves providing raw metal stock in the form of wire, sheet, or bar to prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for delivering certified metal alloys that strictly adhere to the metallurgical requirements of NSN 5310-01-104-9035, with the mandatory provision of Material Test Reports to ensure quality and compliance. The contract mandates strict adherence to the Berry Amendment for domestic sourcing and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 423510. Interested parties must submit their responses by October 23, 2026, to support the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Aerospace Alloy/Material Supply (Ducting)This subcontract involves the supply of aerospace-grade raw metals, pre-formed tubing, and sheets for prime contractors supporting DLA Weapons Support ASC projects. The scope focuses on sourcing high-temperature and corrosion-resistant alloys that strictly adhere to Basic Drawing NR 98897 4A92003 specifications. To ensure quality and traceability, the provider must deliver certified raw materials to the fabricator along with comprehensive Mill Test Reports. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials provided. Interested parties must respond by October 23, 2026, regarding this requirement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

ALUM BRONZE BR C63000

Solicitation # SPEFA1-27-Q-0003

Solicitation SPEFA1-27-Q-0003 is a firm-fixed-price request for the procurement of two nickel aluminum bronze bars, part number SAE AMS-4640, with dimensions of 3.750 inches in diameter and 144 inches in length. The material must strictly adhere to ASTM B150 and SAE-AMS-4640 standards, and all provided material must originate from the same heat lot. Required documentation includes certifications or Certificates of Conformance. Delivery is required within two days after receipt of order, with the inspection and acceptance points both set at the destination. The contract mandates specific packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 DLA requirements. All invoices and receiving reports must be processed electronically through the Wide Area Workflow system. Award decisions will be based on best value, weighing cost, delivery schedule, and past performance via SPRS assessments. The procurement is managed by DLA Aviation at San Diego, and offerors must be registered in the System for Award Management to be eligible for award.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 16 hours ago

DEADLINE

in about 8 hours

Solicitation # SPE8E4-27-Q-0012

This firm-fixed-price solicitation from DLA Troop Support is for the procurement of 6 feet of round steel bar, specifically 302 cold drawn/rolled steel with a 1.500 inch diameter and lengths between 8 and 16 feet. The material must adhere to technical standards including SAE AMS-QQ-S-763D, SAE AMS2806, and ASTM A700-14. Delivery is required within 30 days after order, with the final destination located at Kadena AB in Okinawa, Japan. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and marking requirements, including a required Certificate of Quality Compliance (Mill-Material Certification) and continuous identification markings such as the NSN, contract delivery order number, and manufacturer details. Packaging and preservation must comply with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Inspection and acceptance will occur at the destination, and all invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Supply of Specification-Grade Aluminum StockThis subcontract involves the supply of specification-grade raw aluminum stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing and delivering aluminum that meets MIL-S-24235/17B requirements specifically for Size C, Symbol 1793 components. To ensure quality and compliance, the supplier must provide Mill Test Reports to certify the material grade and properties, and all deliveries must be made directly to the fabricator. The contract is managed under the Department of Defense and requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 22, 2026, for this procurement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Certified Aviation-Grade Fabrics, Threads, and CordsThis subcontract involves the supply of certified aviation-grade raw textile materials, including specific fabrics, threads, and cords, to support prime contractors on DLA Weapons Support ASC aviation life support projects. The provider is responsible for delivering materials that adhere strictly to the Technical Data Package, which includes the submission of first article samples consisting of five square yards of fabric, half a pound of thread, and fifteen yards of cord. The contractor must ensure full supply chain traceability and provide Certificates of Conformance for all materials delivered to the manufacturer. This requirement is managed under NAICS code 423510 for the Department of Defense, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Copper Alloy Sheet Metal SupplierThis subcontract opportunity with the Department of Defense DDSP New Cumberland Facility seeks a supplier for rolled, soft annealed copper alloy sheets to support prime contractors delivering materials for DLA Troop Support. The required materials must conform to UNS C11000, C11300, C11400, or C11600 specifications with a thickness of 0.095 inches. All deliverables must be completed and certified, with strict adherence to marking and packaging standards including MIL-STD-129, MIL-STD-2073-1E, and ASTM B900. Eligible suppliers must maintain QSLM/QSLD status and provide Mill-Material Certification for all shipments. The performance location for this contract is New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, and ensure all technical specifications under NAICS code 423510 are met.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Metal Stock SupplyThis subcontract, titled Specialized Metal Stock Supply, involves the procurement and delivery of raw metal stock for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for sourcing alloy and grade materials that strictly adhere to the 78286 and 81996 drawing series specifications. To ensure quality and traceability, the provider must supply Mill Test Reports and deliver all certified raw material stock directly to the manufacturer. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Jacksonville. Compliance with the Buy American Act and the Berry Amendment is mandatory to ensure domestic sourcing. Interested parties should note the response deadline of October 22, 2026, for this requirement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Certified Aerospace Alloy for Close Tolerance BoltsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of certified aerospace-grade raw metal stock specifically for the production of close tolerance bolts. The scope of work includes the sourcing and smelting of alloys, the provision of certified material test reports, and the delivery of raw material stock with full traceability. To ensure regulatory compliance, the provider must adhere to the requirements of the Berry Amendment and the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423510, with the place of performance located at Tinker AFB. Interested parties must respond by October 22, 2026, to support prime contractors operating on DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Grade Alloy SupplyThis subcontract involves the supply of raw aerospace-grade alloy bar stock or wire to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the chemical and physical properties outlined in NAS7500-7516 standards and must be delivered with Mill Test Reports to ensure full material certification and traceability. The contract requires strict compliance with the Buy American Act and the Berry Amendment. Performance for this Department of Defense requirement is centered at Tinker AFB, and the procurement falls under NAICS code 423510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Distribution and Quality Assurance of Aluminum Structural SectionsThis subcontract involves the supply of specially shaped aluminum structural sections for prime contractors supporting Department of Defense supply contracts. The provider is responsible for sourcing 7075/T73511 material exclusively from QSLM-approved manufacturers, ensuring continuous identification markings are verified, and managing all necessary Mill-Material Certification documentation. Compliance with QSLD certification per Procurement Note IY010 is a mandatory requirement for this engagement. The final certified aluminum sections are to be delivered to the DLA Distribution Depot Hill located at Hill AFB. This procurement falls under NAICS code 423510 and is managed through the Department of Defense.

POSTED

DEADLINE

Raw Material Supplier (Spring Steel/Alloy)This subcontract opportunity with the Department of Defense DLA Weapons Support ASC Commodities Division seeks a supplier to provide high-grade spring steel or specified alloy wire and bar stock. The materials must strictly adhere to the chemical and physical properties outlined in NASM16562 and NASM10971. To ensure full traceability, the supplier is required to provide Material Test Reports or Certificates of Conformance with all deliveries. Compliance with the Buy American Act and Berry Amendment domestic sourcing restrictions is mandatory for this contract. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 22, 2026, under NAICS code 423510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

Supply of Fire Blankets (NSN 4210016613453)This HUBZone set-aside subcontract involves the manufacture or sourcing of 79 fire blankets for prime contractors under a Department of Defense agency in San Diego. The required units must match NSN 4210016613453 and Newtex part number 2200162-15005, with delivery terms set as FOB Origin. The contractor is responsible for strict adherence to military and safety standards, including packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Additionally, all deliverables must comply with the DLA Master List of Technical and Quality Requirements RA001 and 29 CFR 1910.1200 hazard labeling regulations.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

Electric Fluid Heater Supplier (NSN 4410-01-532-7330)This subcontract, issued by the Department of Defense in San Diego, seeks a supplier to provide two electric fluid heaters under NSN 4410-01-532-7330 for prime contractors fulfilling DLA supply contracts. The selected vendor must manufacture or source heaters that match Chromalox part number 052-072820-003 and provide technical data packages to facilitate the evaluation of alternate parts. Strict adherence to military standards is required, specifically MIL-STD-130 for Item Unique Identification and MIL-STD-2073-1E for packaging. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910, with a response deadline of October 26, 2026. Performance will take place in San Diego, California.

Battery Manufacturing

POSTED

DEADLINE

Bronze 3-Way Solenoid Valve SupplierThis subcontract involves the manufacture or procurement of two bronze, flanged, 3-way solenoid valves for prime contractors supporting DLA Distribution San Diego. The required valves must be 1 1/2 inch IPS, rated for 75 PSI and 120 volt AC, with openings sealed using noncorrosive plastic plugs. All items must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract requires strict compliance with the Buy American Act and specifies delivery terms as FOB Origin. Performance will take place in San Diego, California, under the oversight of the Department of Defense. Interested parties must submit responses by October 26, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Apollo Flame Detectors (P/N 55000-280)This subcontract involves the procurement and delivery of six specialized flame detectors, specifically part number 55000-280 from Apollo Fire Detectors Ltd, under NSN 6350-99-426-3184. The contract supports prime contractors fulfilling Department of Defense supply requirements through the agency in San Diego. All units must strictly adhere to DLA Packaging Requirements RP001 as well as Technical and Quality Requirements RA001 to ensure operational compliance. The shipment is to be delivered FOB Origin, with the place of performance located in San Diego, California. The procurement falls under NAICS code 334512, and the response deadline for this opportunity is October 26, 2026.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing specialized military packaging for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of industrial components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129. Additionally, the contractor must execute palletization following DLA RP001 standards to ensure proper transport to DLA Distribution San Diego, with a total delivery requirement of 28 packaged and palletized units. Managed by the Department of Defense in San Diego, the project falls under NAICS code 488410. The performance of these services will take place in San Diego, California. Interested parties should note the response deadline of October 26, 2026, for this specific logistics requirement.

Motor Vehicle Towing

POSTED

DEADLINE

Fabrication of Industrial Fluid Cooler BafflesThis subcontract involves the fabrication of 28 industrial fluid cooler baffles for prime contractors supporting Department of Defense supply contracts through the agency in San Diego. The manufacturer is required to produce units according to NSN 4420-01-612-5942 and Fairbanks Morse part number PA12652373 specifications. The scope of work includes metal cutting, bending, and welding, all of which must be performed in accordance with the provided technical data package and DLA Quality Requirements RA001. Compliance with MIL-STD-129 for marking is mandatory for all delivered units. The project falls under NAICS code 332312 and will be performed in San Diego, California. Interested parties must adhere to the response deadline of October 26, 2026, to provide the 28 completed industrial baffles as specified.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging and marking for prime contractors supporting DLA Weapons Support Maritime Hardware contracts. The service provider is responsible for packaging hardware according to MIL-STD-2073-1E and applying markings per MIL-STD-129, with a strict requirement that no mercury or mercury compounds are used in the process. The final deliverable is a shipment-ready valve that meets all DLA standards. The work will be performed in San Diego, California, with shipments prepared for FOB Origin delivery to DLA Distribution San Diego. This opportunity is associated with the Department of Defense and falls under NAICS code 488510. The response deadline for this requirement is October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Fluid Pressure Regulating Valve SupplyThis subcontract involves the supply of one Fluid Pressure Regulating Valve, identified by NSN 4820015803067, to support DLA Weapons Support Maritime Hardware contracts. The contractor is responsible for manufacturing or sourcing the valve in accordance with DLA Master List RA001, with a strict requirement that no mercury compounds are used in preservation. All materials must adhere to the Buy American Act and the Berry Amendment. The Department of Defense agency in San Diego oversees this requirement, which specifies that the valve must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The performance of the contract will take place in San Diego, California, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Heater Assembly (NSN 4520-01-516-2852)This subcontract, issued by the Department of Defense in San Diego, requires the manufacture or sourcing of one Heater Assembly meeting NSN 4520-01-516-2852 specifications for prime contractors fulfilling DLA supply contracts. The selected provider must ensure strict adherence to RA001 quality requirements and follow specific waterproof packaging and marking standards, including Preservation Method 30, MIL-STD-2073-1E, RP001, and MIL-STD-129. Notably, the use of additive manufacturing is strictly prohibited unless prior approval is granted by the ESA. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333415, with performance taking place in San Diego. Interested parties must submit their responses by October 26, 2026. The final deliverable consists of the completed and packaged assembly delivered according to the specified military standards.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Manufacturer of Electrical Immersion Heating ElementsThis subcontract opportunity is for the manufacture and supply of two electrical immersion-type heating elements to support prime contractors on DLA Troop Support projects. The elements must be produced in strict accordance with NSN 4520-01-542-0727 and DLA Master List RA001 specifications. The contract requires full compliance with the Buy American Act and the Berry Amendment, while explicitly prohibiting the use of mercury compounds and additive manufacturing processes. The project is a total small business set-aside under NAICS code 335999, managed by the Department of Defense in San Diego. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards, with delivery terms set as FOB Origin. Interested parties must submit their responses by October 26, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Nonimmersion Electrical Heating ElementsThis subcontract involves the supply of nonimmersion electrical heating elements to prime contractors under Department of Defense contracts managed by the agency in San Diego. The provider is responsible for manufacturing or sourcing elements that strictly adhere to NSN 4520-01-515-8360 specifications, while ensuring full compliance with the DLA Master List of Technical and Quality Requirements RA001 and DLA Packaging Requirements RP001. The performance of this contract takes place in San Diego, with finished products delivered via Government-Arranged Transportation. Classified under NAICS code 335911, the opportunity was posted on October 14, 2026, with a response deadline set for October 26, 2026.

Storage Battery Manufacturing

POSTED

DEADLINE

Fire Hose Rack Manufacturer/SupplierThis subcontract involves the manufacture or sourcing of 13 finished fire hose racks to support prime contractors for DLA Troop Support Construction and Equipment contracts. The equipment must strictly adhere to NSN 4210-01-508-8455 and Part Number A31170035. All deliverables must be packaged and palletized according to IP025, RP001, and ASTM D3951 standards, with marking requirements following MIL-STD-129. The selected supplier must ensure full compliance with DFARS 252.204-7012. The final delivery of the 13 completed racks is designated as FOB Origin to DLA Distribution San Diego. This requirement falls under NAICS code 332322 and is managed through the Department of Defense in San Diego.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS