Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Certified Aviation-Grade Fabrics, Threads, and Cords

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified aviation-grade raw textile materials, including specific fabrics, threads, and cords, to support prime contractors on DLA Weapons Support ASC aviation life support projects. The provider is responsible for delivering materials that adhere strictly to the Technical Data Package, which includes the submission of first article samples consisting of five square yards of fabric, half a pound of thread, and fifteen yards of cord. The contractor must ensure full supply chain traceability and provide Certificates of Conformance for all materials delivered to the manufacturer. This requirement is managed under NAICS code 423510 for the Department of Defense, with a response deadline set for October 30, 2026.

General Info

Supply certified aviation textiles for DLA projects with full traceability by October 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

423510 - Metal Service Centers and Other Metal Merchant Wholesalers

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-Q-0077.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LINE, MULTI-LOOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw textile materials for prime contractors on DLA Weapons Support ASC aviation life support projects. Provides specific fabrics, threads, and cords as defined in the TDP, including first article samples (5 sq yards fabric, 1/2 lb thread, 15 yards cord). Provides Certificates of Conformance and full supply chain traceability documentation. Delivers certified raw materials to the manufacturer.

Similar Contracts

Same NAICS industry code

Specialized Metal Stock SupplyThis subcontract for Specialized Metal Stock Supply involves providing raw metal stock in the form of wire, sheet, or bar to prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for delivering certified metal alloys that strictly adhere to the metallurgical requirements of NSN 5310-01-104-9035, with the mandatory provision of Material Test Reports to ensure quality and compliance. The contract mandates strict adherence to the Berry Amendment for domestic sourcing and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 423510. Interested parties must submit their responses by October 23, 2026, to support the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Aerospace Alloy/Material Supply (Ducting)This subcontract involves the supply of aerospace-grade raw metals, pre-formed tubing, and sheets for prime contractors supporting DLA Weapons Support ASC projects. The scope focuses on sourcing high-temperature and corrosion-resistant alloys that strictly adhere to Basic Drawing NR 98897 4A92003 specifications. To ensure quality and traceability, the provider must deliver certified raw materials to the fabricator along with comprehensive Mill Test Reports. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials provided. Interested parties must respond by October 23, 2026, regarding this requirement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

ALUM BRONZE BR C63000

Solicitation # SPEFA1-27-Q-0003

Solicitation SPEFA1-27-Q-0003 is a firm-fixed-price request for the procurement of two nickel aluminum bronze bars, part number SAE AMS-4640, with dimensions of 3.750 inches in diameter and 144 inches in length. The material must strictly adhere to ASTM B150 and SAE-AMS-4640 standards, and all provided material must originate from the same heat lot. Required documentation includes certifications or Certificates of Conformance. Delivery is required within two days after receipt of order, with the inspection and acceptance points both set at the destination. The contract mandates specific packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 DLA requirements. All invoices and receiving reports must be processed electronically through the Wide Area Workflow system. Award decisions will be based on best value, weighing cost, delivery schedule, and past performance via SPRS assessments. The procurement is managed by DLA Aviation at San Diego, and offerors must be registered in the System for Award Management to be eligible for award.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 18 hours ago

DEADLINE

in about 6 hours

Solicitation # SPE8E4-27-Q-0012

This firm-fixed-price solicitation from DLA Troop Support is for the procurement of 6 feet of round steel bar, specifically 302 cold drawn/rolled steel with a 1.500 inch diameter and lengths between 8 and 16 feet. The material must adhere to technical standards including SAE AMS-QQ-S-763D, SAE AMS2806, and ASTM A700-14. Delivery is required within 30 days after order, with the final destination located at Kadena AB in Okinawa, Japan. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and marking requirements, including a required Certificate of Quality Compliance (Mill-Material Certification) and continuous identification markings such as the NSN, contract delivery order number, and manufacturer details. Packaging and preservation must comply with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Inspection and acceptance will occur at the destination, and all invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Supply of Specification-Grade Aluminum StockThis subcontract involves the supply of specification-grade raw aluminum stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing and delivering aluminum that meets MIL-S-24235/17B requirements specifically for Size C, Symbol 1793 components. To ensure quality and compliance, the supplier must provide Mill Test Reports to certify the material grade and properties, and all deliveries must be made directly to the fabricator. The contract is managed under the Department of Defense and requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 22, 2026, for this procurement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Copper Alloy Sheet Metal SupplierThis subcontract opportunity with the Department of Defense DDSP New Cumberland Facility seeks a supplier for rolled, soft annealed copper alloy sheets to support prime contractors delivering materials for DLA Troop Support. The required materials must conform to UNS C11000, C11300, C11400, or C11600 specifications with a thickness of 0.095 inches. All deliverables must be completed and certified, with strict adherence to marking and packaging standards including MIL-STD-129, MIL-STD-2073-1E, and ASTM B900. Eligible suppliers must maintain QSLM/QSLD status and provide Mill-Material Certification for all shipments. The performance location for this contract is New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, and ensure all technical specifications under NAICS code 423510 are met.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Metal Stock SupplyThis subcontract, titled Specialized Metal Stock Supply, involves the procurement and delivery of raw metal stock for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for sourcing alloy and grade materials that strictly adhere to the 78286 and 81996 drawing series specifications. To ensure quality and traceability, the provider must supply Mill Test Reports and deliver all certified raw material stock directly to the manufacturer. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Jacksonville. Compliance with the Buy American Act and the Berry Amendment is mandatory to ensure domestic sourcing. Interested parties should note the response deadline of October 22, 2026, for this requirement categorized under NAICS code 423510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of 4130 Hardened and Tempered Steel BarsThis subcontract, managed by the Department of Defense in San Diego, involves the supply of 73 total feet of hot rolled, round, hardened and tempered 4130 steel metal bars. The required materials must have a diameter of 1.250 inches, be provided in lengths between 10 and 12 feet, and maintain a weight of 4.170 LB/FT. These supplies are intended for prime contractors operating under DLA Troop Support supply contracts. To ensure quality and compliance, the provider must hold a QSDL listing for FSGs 95 and 96 and provide Mill-Material Certification. All shipments must be packed according to ASTM A700, MIL-STD-129, and MIL-STD-2073-1E standards. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 423510.

POSTED

DEADLINE

Supply of Certified Aerospace Alloy for Close Tolerance BoltsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of certified aerospace-grade raw metal stock specifically for the production of close tolerance bolts. The scope of work includes the sourcing and smelting of alloys, the provision of certified material test reports, and the delivery of raw material stock with full traceability. To ensure regulatory compliance, the provider must adhere to the requirements of the Berry Amendment and the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423510, with the place of performance located at Tinker AFB. Interested parties must respond by October 22, 2026, to support prime contractors operating on DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Grade Alloy SupplyThis subcontract involves the supply of raw aerospace-grade alloy bar stock or wire to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the chemical and physical properties outlined in NAS7500-7516 standards and must be delivered with Mill Test Reports to ensure full material certification and traceability. The contract requires strict compliance with the Buy American Act and the Berry Amendment. Performance for this Department of Defense requirement is centered at Tinker AFB, and the procurement falls under NAICS code 423510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Distribution and Quality Assurance of Aluminum Structural SectionsThis subcontract involves the supply of specially shaped aluminum structural sections for prime contractors supporting Department of Defense supply contracts. The provider is responsible for sourcing 7075/T73511 material exclusively from QSLM-approved manufacturers, ensuring continuous identification markings are verified, and managing all necessary Mill-Material Certification documentation. Compliance with QSLD certification per Procurement Note IY010 is a mandatory requirement for this engagement. The final certified aluminum sections are to be delivered to the DLA Distribution Depot Hill located at Hill AFB. This procurement falls under NAICS code 423510 and is managed through the Department of Defense.

POSTED

DEADLINE

Raw Material Supplier (Spring Steel/Alloy)This subcontract opportunity with the Department of Defense DLA Weapons Support ASC Commodities Division seeks a supplier to provide high-grade spring steel or specified alloy wire and bar stock. The materials must strictly adhere to the chemical and physical properties outlined in NASM16562 and NASM10971. To ensure full traceability, the supplier is required to provide Material Test Reports or Certificates of Conformance with all deliveries. Compliance with the Buy American Act and Berry Amendment domestic sourcing restrictions is mandatory for this contract. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 22, 2026, under NAICS code 423510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Forwarding ServicesThis subcontract for MIL-SPEC Packaging and Freight Forwarding Services involves providing specialized military packaging, marking, and shipping for 165 precision components. The work must be performed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically utilizing preservation method 33 and wrap material GCH. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope includes coordinating FOB Origin shipment to the freight forwarder A.J. Worldwide Services for final delivery to Kayseri, Turkey. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Precision Machining and Fabrication of Load Balls (PN 191B36-5)This subcontract involves the precision machining and fabrication of 165 Load Balls for screwjacks, identified as part number 191B36-5 and NSN 1680000896121. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider must utilize CNC machining and grinding equipment to ensure all units meet strict tolerances and comply with the Buy American Act and Berry Amendment regarding material sourcing. Quality assurance is a critical component of the contract, requiring adherence to SAE AS9003 or ISO 9001 inspection standards. Additionally, the manufacturer must implement zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable consists of 165 finished units intended for prime contractors fulfilling DLA supply contracts.

POSTED

about 18 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Incandescent Lamps (MS25231-313R)This subcontract involves the supply of 1,429 mercury-free incandescent lamps, specifically NSN 6240001557919 and Part Number MS25231-313R, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The lamps must be manufactured or sourced in strict accordance with SAE aeronautical specification AS25050 and marked as 313R. Performance of this contract will take place in Greensboro, North Carolina. To ensure operational standards, the provider must maintain quality control systems compliant with either SAE AS9003 or ISO 9001. Additionally, all deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 335139.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129 and RP001. Specific technical requirements include the application of packaging data QUP 001 and Pres Mthd 10 to ensure all materials meet Department of Defense standards. The primary objective is the delivery of a shipment-ready actuator to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This effort falls under NAICS code 488510 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is October 23, 2026.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 18 hours ago

DEADLINE

Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Fabrication of Panel Housings/FramesThis subcontract involves the fabrication of 35 physical panel housings and frames for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes precision machining, molding, and the cutting of apertures for mounting hardware and light indicators. Additionally, the contractor is responsible for applying specific finishes and coatings in accordance with the technical data provided for NSN 6220010310292. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The contract falls under NAICS code 332710, and interested parties must adhere to the response deadline of October 23, 2026.

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS