Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of 5,000-Lb Electric Forklifts (Class II, Outdoor-Ready)

Active

Federal

Response Deadline07/28/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply and delivery of two electric-powered forklifts with a 5,000-pound capacity, designated as Class II and designed for both indoor and outdoor operations. Each forklift is equipped with a 48-volt electrical system, pneumatic tires for enhanced traction and durability across varied terrain, 42-inch forks for standard pallet handling, and comprehensive safety features to meet occupational standards. The equipment must be suitable for seamless operation in mixed environments, ensuring efficiency and reliability in demanding logistical settings. This subcontract is structured as a Total Small Business Set-Aside under SBA guidelines, with the NAICS code 333120 categorizing it under industrial machinery manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of July 28, 2026, and the place of performance is identified as Little Falls. The contracting activity is managed by the Department of Defense through the W7NG Uspfo Activity Mn Arng, indicating a federal defense-related procurement. The contract does not specify a solicitation number or detailed contact information, but the official UI link is provided for further access to the opportunity.

General Info

Two 5,000-lb electric forklifts delivered to Little Falls for DoD use, Class II, pneumatic tires, 48V system.

Agency

Department Of Defense → W7NG Uspfo Activity Mn ArngView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Little Falls, MN, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 04:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7NG Uspfo Activity Mn Arng

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7NG Uspfo Activity Mn Arng

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of two new electric-powered forklifts with 5,000-lb capacity, 48V system, pneumatic tires, 42” forks, and full safety features for indoor/outdoor use.

Similar Contracts

Same NAICS industry code

Non-NSN Component Supply & Delivery

LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Heavy Construction Equipment ComponentsThe contract involves the fabrication and assembly of heavy construction equipment components, specifically for earthmoving, lifting, and material handling machinery, all manufactured to meet Department of Defense technical specifications under NAICS code 333120. The work is classified as a subcontract and must be completed in accordance with stringent quality and compliance standards defined by the DLA, with performance centered at Robins Air Force Base in Georgia, zip code 31098-1887. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with no set-aside designation applied, meaning all eligible contractors may compete. The contracting activity falls under the Department of Defense’s Construction and Equipment Manufacturing organization, and all work must be carried out to support military logistics and operational readiness using approved manufacturing processes and materials.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

DRUM, WINCHThe contract solicits nine drum winch units under NSN 3830-01-677-0179 with a total delivery timeline of 287 days ADO, issued under solicitation SPE8EE-26-T-2164 as a Total Small Business Set-Aside. The requirement incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and mandates that only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access controlled data. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization, and contractors must adhere to DLA packaging requirements, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. All technical data handling must comply with DFARS 252.225-7048. The solicitation is issued by the Department of Defense under NAICS code 333120, with performance occurring in New Cumberland, Pennsylvania, and inquiries directed to Philip Ferrara at the provided contact information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ADAPTER, WEAPON SKIDThe item specified is an Adapter, Weapon Skid with NSN 1740-00-943-7946, for a quantity of four units, under Purchase Request 7017585091, with a delivery requirement of 167 days after contract award. The procurement is governed by Solicitation SPE8EF-26-T-1484, issued on July 22, 2026, with responses due by August 3, 2026. Technical and quality requirements are enforced through the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the size of the acquisition. This procurement is subject to defense export control regulations, meaning any technical data associated with the item is restricted under ITAR or EAR, and its export—defined broadly to include disclosure to foreign persons regardless of location—requires prior authorization from the Department of State or Commerce. Contractors must meet strict eligibility criteria including JCP certification, completion of DOD export control training, and approval by DLA to access controlled data, in compliance with DFARS 252.225-7048. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, PA, 17070-5002, and the NAICS code is 333120 under the Department of Defense. Primary point of contact is Russell Keiser, reachable via email and phone as listed.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

KEEPER INSTL-HANDLEThe contract pertains to the procurement of KEEPER INSTL-HANDLE with NSN 1740-01-498-6202 and part number 791716-001, for a quantity of 25 units at a unit price of $25.00, totaling $625. Delivery is required within 167 days from the contract date, with shipment FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 but is superseded by any applicable DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129. Palletization must adhere to RP001 DLA Packaging Requirements. The Unit of Issue is EA, with zero tolerance for quantity variance. The delivery destination is DLA District San Joaquin, Recipient Warehouse 57, 25600 S Chrisman Road, Tracy, CA 95304-5000, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The original required delivery date is December 5, 2026, with a need ship date of January 18, 2027. The solicitation number is SPE8EF-26-T-1490, issued on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 333120. Covered Defense Information may apply, and all technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List. Government identification must be removed from non-accepted supplies per RQ011.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PAD, ANGLED UMCThe contract pertains to the procurement of 634 units of PAD, ANGLED UMC with NSN 1740-01-617-9491 under solicitation SPE8E9-26-T-3221, issued by the Department of Defense through DLA. The item is to be delivered FOB origin within 167 days of contract award, with a required delivery date of November 13, 2026, and a need ship date of January 18, 2027. The unit price is $634.00 per unit, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 unless superseded by applicable DLA Master List of Technical and Quality Requirements, which take precedence; all packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. The contract references DLA Procurement Notes C19 and C20 for transportation instructions, and the unit of issue is EA. The item is subject to Covered Defense Information protocols, and all technical and quality specifications must be sourced from the DLA Master List as of the solicitation issue date.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

COVER, SUPPORT ASSEMThe contract specifies the procurement of a Cover, Support Assembly measuring 9.60 inches in length and 7.20 inches in width, identified by NSN 1740-00-885-4698 and Part Number 101719-79, for use on Model 4000 Trailers. Twenty-seven units are required at a unit price of $27.00, totaling $729.00, with delivery mandated within 167 days under FOB Origin terms. All items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, prioritizing DLA’s Master List of Technical and Quality Requirements, and palletized per RP001 packaging standards. The contract incorporates cybersecurity requirements mandating CMMC Level 2 Self-Assessment and applies to Covered Defense Information, with technical and quality specifications governed by referenced R and I numbers from the DLA Master List. The supplies are to be delivered to DLA Distribution Warner Robins at Robins AFB, Georgia, with inspection and acceptance occurring at destination. No quantity variance is permitted, and the item is subject to the removal of government identification if not accepted. The solicitation number is SPE8EF-26-T-1483, with a response deadline of August 3, 2026, and the requirement is issued under NAICS code 333120 by the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

GEAR, RUNNING-2 AXLEThe contract is for the procurement of three units of GEAR, RUNNING-2 AXLE, a military-grade running gear assembly designed for a 4000-pound, four-wheel vehicle, including hubs but excluding wheel rims and tires. The item is identified by NSN 1740-01-498-6512 and falls under a total small business set-aside as defined by FAR 19.5, with the NAICS code 333120 indicating classification under manufacturing of other construction and earth-moving equipment. The solicitation number is SPE8EF-26-T-1495, issued by the Department of Defense under the Construction & Equipment Manu & Con organization, with a response deadline of August 3, 2026, and an expected delivery date 167 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the specific revision in effect determined by the solicitation issue or award date depending on acquisition size. The contract incorporates DLA packaging standards and applies to covered defense information, requiring compliance with data handling protocols. Government identification must be removed from non-accepted supplies, and performance is to occur at New Cumberland, Pennsylvania, 17070-5002, with Russell Keiser designated as the primary point of contact.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Agricultural Tractor Supply (All-Wheeled, Hydrostatic Transmission)The contract calls for the supply of a fully equipped all-wheeled agricultural tractor featuring hydrostatic transmission, a soundproof cabin, a three-point hitch, a rear power take-off, a hydraulic front lift, and comprehensive safety systems, with performance and specifications equivalent to the Carraro TTR 4800 HST model. The equipment must meet rigorous operational standards suitable for agricultural use in demanding environments, ensuring reliability, operator comfort, and compatibility with standard farming implements. All components must be factory-new, properly certified, and installed to guarantee seamless integration and long-term durability under heavy use. The solicitation is classified as a subcontract under NAICS code 333120, with a response deadline of July 29, 2026, at 8:00 a.m. and was posted on July 22, 2026. The place of performance is designated as Grafenwoehr with a zip code of 92655, indicating the equipment is intended for use at a U.S. Department of Defense facility, likely supporting farm or land management operations on military property. The contracting entity is listed as 0409 Aq Hq Contract under the Department of Defense, suggesting this procurement supports logistical or sustainment efforts for overseas military installations requiring agricultural support infrastructure.

0409 Aq Hq Contract

POSTED

DEADLINE

Supply of Heavy-Duty Rotary Cutter for Land Management

Csa East 2 Usda-Fs

POSTED

DEADLINE

38--DRUM,WINCHThe procurement seeks nine units of NSN 3830016770179 DRUM, WINCH, with one additional unit requested, all to be delivered to W1A8 DLA DISTRIBUTION under different timelines—97 days and 90 days after contract award respectively. This is a total small business set-aside solicitation under the SBA program, restricted exclusively to small businesses as defined by FAR 19.5, with the North American Industry Classification System code 333120. All responsible vendors may submit electronic quotes prior to the response deadline of August 3, 2026, with no physical submissions accepted. The solicitation is managed by the Department of Defense through DLA Troop Support, based in Philadelphia, Pennsylvania. Questions must be directed via email to the designated buyer, and detailed information can be accessed through the SAM.gov portal using the solicitation number SPE8EE26T2164, with the posting date listed as July 22, 2026.

DLA Troop Support

POSTED

DEADLINE

38--CTL, Vandenberg AFB, Wildland Fire Branch, CA

POSTED

DEADLINE

More opportunities from Department Of Defense → W7NG Uspfo Activity Mn Arng

Same awarding agency

Forklift Installation, Inspection, and Acceptance SupportThe contract requires on-site inspection, setup, and operational verification of forklifts at Camp Ripley, specifically focusing on key performance metrics such as lift height, speed, tilt functionality, and the integrity of all safety systems. All work must be performed in accordance with established standards to ensure equipment reliability and operator safety, with acceptance contingent upon successful completion of these tests and validations. The scope encompasses hands-on technical execution at the location in Little Falls, Minnesota, and does not include remote or off-site services. This is a small business set-aside subcontract under NAICS code 811310, open exclusively to total small businesses as defined by the SBA. The solicitation was posted on July 22, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense through the W7NG Uspfo Activity Mn Arng. The work must be completed in full compliance with federal regulations and industry best practices for material handling equipment, with successful performance triggering final acceptance by the contracting authority.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Forklift Battery and Charger SupplyThe contract involves the supply of matched 48V battery systems and onboard chargers specifically designed for 5,000-pound electric forklifts, ensuring full compatibility and compliance with both manufacturer specifications and applicable safety standards. The equipment must meet rigorous performance and reliability requirements to support daily operations in demanding industrial environments, with an emphasis on interoperability between the batteries and chargers to optimize charging efficiency and vehicle uptime. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, limited exclusively to small businesses as defined by the North American Industry Classification System code 335912, which covers battery manufacturing. The opportunity was posted on July 22, 2026, with a response deadline of July 28, 2026, and performance is expected to be delivered to Little Falls. The contracting activity is managed by the Department of Defense through the W7NG Uspfo Activity Mn Arng, indicating the end-use of the equipment is for military or defense-related logistics operations.

Primary Battery Manufacturing

POSTED

DEADLINE

5K Electric ForkliftThe Minnesota National Guard is soliciting quotations for two 5K electric forklifts under solicitation W912LM26QA018, issued as a 100 percent Total Small Business Set-Aside under FAR 19.5, with NAICS code 333924. The requirement is for equipment configured to operate both indoors and on compacted gravel surfaces at Camp Ripley Training Center in Little Falls, Minnesota, with delivery FOB destination. The Statement of Work has been amended to update technical specifications, including reducing the minimum maximum fork height to 157 inches, changing fork length to 42 inches, mandating air pneumatic tires, and requiring ground clearance to meet industry standards for 5K electric forklifts, replacing the previous 8-inch specification. Quotations must comply with the amended Statement of Work (A 02) and incorporate responses from the updated Forklift Questions document (B 08), submitted via SF-1449. The solicitation is issued under simplified acquisition procedures per RFO 12.201 and is considered short of award, contingent upon the availability of fiscal year 2026 funds anticipated by September 30, 2026; no award will be made if funds are not appropriated. The deadline for submitting quotes is July 28, 2026, with questions due by July 21, 2026. All proposals must be submitted electronically through the official government procurement portal. Acceptance will occur at the designated delivery site upon inspection for compliance with all technical requirements, including a 12-month or 2,000-hour warranty on basic components and a 24-month or 4,000-hour warranty on the powertrain, along with standard safety features such as backup alarms, strobe lights, headlights, and rearview mirrors.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Forklifts - 5K Diesel (2x)The Minnesota Army National Guard is seeking two brand-new 5K Diesel Forklifts for use at Camp Ripley Training Center in Little Falls, Minnesota, under solicitation W912LM-26-Q-A017, which is issued as a Request for Quotation in accordance with FAR 12.202. This acquisition is structured as a Brand Name or Equal purchase, with detailed minimum requirements outlined in the attached Statement of Work, which has been amended to clarify specifications, with changes highlighted for ease of reference. Delivery must be made FOB Destination, and the procurement is set aside 100% for small businesses under NAICS code 333924, with an active SBA Non-Manufacturer Rule class waiver in place. Submission is limited to electronic responses sent via email to the Contract Specialist, Dan Bart, with a closing date of July 29, 2026. Award is contingent upon the availability of fiscal year 2026 funds, which are anticipated but not currently obligated, meaning the government reserves the right to cancel the solicitation if funding does not materialize by September 2026. The procurement is managed by the Department of Defense under the U.S. Army Pacific Forces Office in Minnesota, and all responses must be submitted by the stipulated deadline to be considered.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Unable to Decompose Prime ContractThe contract titled "Unable to Decompose Prime Contract" is a subcontract opportunity under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to compete. It was posted on July 9, 2026, with a response deadline of July 29, 2026, at 6:00 PM. The solicitation number is not provided, and the NAICS code is listed as 000000, indicating no classification has been assigned. The contracting agency is the Department of Defense, specifically the W7NG Uspfo Activity Mn Arng, but no office address or place of performance details are available. Due to insufficient access to prime contract data, it is not possible to break down or analyze potential subcontracting opportunities within this award. Point of contact information is also missing, and the only reference for additional information is a SAM.gov link, which may require direct access for full details.

POSTED

DEADLINE

Recruitment Campaign Performance Analytics & Reporting

Marketing Research and Public Opinion Polling

POSTED

DEADLINE

Media Outreach & Publisher Relationship Management

Media Representatives

POSTED

DEADLINE

Recruitment Content Development (Copywriting & Creative Design)

Advertising Agencies

POSTED

DEADLINE

Digital/Electronic Media Advertising Campaign Management

Media Buying Agencies

POSTED

DEADLINE

Targeted Print Media Advertising for Medical Recruitment

Media Representatives

POSTED

DEADLINE