This Subcontract opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of 6-Inch Rubber Oil and Gasoline Discharge Hose

Closed

Federal

Submission Closed10/05/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-27-T-0341

Solicitation SPE7L1-27-T-0341 is a fixed-price request for quotation issued by the DLA Weapons Support Land Supply Chain for the procurement of one oil pan, identified by NSN 2815015240614 and Caterpillar part number 225-6004. The requirement is for a quantity of one unit to be delivered within 20 days after the order, with shipping terms set as FOB Origin under the First Destination Transportation program. The item is to be delivered to the 0189 CS BN CO A Composite AWCF SSA at Fort Bragg, North Carolina, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements RP001. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. All quotes must be submitted via the DIBBS portal and comply with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-U-0131

Solicitation SPE7L1-27-U-0131 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of air engine starters, identified by NSN 2990-01-700-0364 and part number 00G11200C. This request for quotations seeks to establish a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. The estimated annual requirement is 8 units, though this quantity is not guaranteed. Quotations must be submitted via the DIBBS portal by November 10, 2026, with price evaluation based on the quoted cost for the estimated annual demand. Deliveries are required within 101 days after the order, with terms set as FOB Origin and delivery locations within the continental United States. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring palletization complies with RP001. All technical and quality requirements are governed by the DLA Master List. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates critical federal regulations regarding cybersecurity, domestic material sourcing, and the prohibition of unauthorized additive manufacturing.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0346

Solicitation SPE7LX-27-U-0346 is a total small business set-aside issued by the DLA Weapons Support Strategic Acq Program Directorate for the procurement of cylinder sleeves (NSN 2815-01-247-2221) used on Detroit Diesel 71 series diesel engines. This request for quotations may result in a unilateral indefinite delivery contract with a maximum value of 350,000.00 USD and an estimated annual quantity of 404 units. The required parts must be size 3 classification with an outside diameter between 4.6260 and 4.6270 inches, a port height of 1.05 inches, and a production date stamp of April 1989 or later. Delivery is required within 52 days after receipt of order, with FOB point at origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific requirements for arrow placement on containers. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Alternate offerors must provide comprehensive documentation, including manufacturing drawings, process sheets, and source identification; if reverse engineering was used, a detailed engineering analysis report is required. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2804

Solicitation SPE7L1-27-T-2804 is a small business set-aside request for quotation issued by the DLA Weapons Support Land Supply Chain for one engine crankshaft, identified by NSN 2815-01-717-8078. The required delivery date is June 29, 2026, with a delivery timeframe of 20 days after receipt of order. Shipping is designated as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. Inspection and acceptance will occur at the destination, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 standards. This procurement is subject to strict export controls of technical data under DFARS 252.225-7048, requiring offerors and their sources of supply to be approved by the DLA controlling authority J34. Compliance with the Buy American Act, the Berry Amendment, and various cybersecurity standards, including DFARS 252.204-7012 for safeguarding covered defense information, is mandatory. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and palletization. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L5-27-T-0408

Solicitation SPE7L5-27-T-0408 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of nine gasoline outboard engines. The required equipment is identified as a critical application item, specifically Raider Outboards Inc part number R50-ES-001 under NSN 2805016523076. This is a HUBZone set-aside acquisition under NAICS code 333618, with a required delivery date of May 2, 2027, and a delivery lead time of 173 days after order. The contract specifies that items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Strict adherence to packaging and marking standards is required, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and cybersecurity reporting standards.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

PUMP, COOLING SYSTEM, EN

Solicitation # SPE7L1-27-U-0123

Solicitation SPE7L1-27-U-0123 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of engine cooling system pumps, identified by NSN 2930-15-155-7843. This is a non-small business set-aside for a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a maximum value of 350,000.00 USD. The contract covers an estimated annual quantity of 6 units, with a guaranteed minimum of 1 unit, to be delivered within 93 days after order. Delivery is FOB Origin, while inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality requirements, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129, and palletization must follow RP001 guidelines. Additionally, the use of Class I ozone-depleting chemicals and additive manufacturing processes is prohibited unless specifically authorized. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system, and contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

GOVERNOR, DIESEL ENGINE

Solicitation # SPE7L1-27-Q-0191

Solicitation SPE7L1-27-Q-0191 is a small business set-aside Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 184 diesel engine governors (NSN 2910-01-084-1224). The scope of work identifies Allison Transmission Inc and W.W. Williams Company, The LLC as relevant sources for part number 6881462. Delivery is required within 178 days after date order to the DLA Distribution DDSP New Cumberland facility. Award will be based on the best value, with an evaluation focusing on price, offered delivery, and past performance. The contract mandates strict adherence to technical and quality requirements, including Production Lot Testing to validate quality conformance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Critical security and regulatory requirements include CMMC Level 2 certification, the protection of covered defense information, and strict export controls under ITAR and EAR. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

BAFFLE, AIRFLOW, NONAIRC

Solicitation # SPE7L5-27-T-0433

Solicitation SPE7L5-27-T-0433 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of eight non-aircraft reciprocating airflow baffles, identified by NSN 2805-01-572-7115 and part number C431-025-3220. The required delivery date is April 5, 2027, with a delivery timeline of 146 days after order. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and ASTM D3951, with the DLA Master List of Technical and Quality Requirements taking precedence. Offerors must submit quotes via the DIBBS portal and maintain active registration in the System for Award Management. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and specific prohibitions against the use of additive manufacturing unless authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

MOTOR, DIRECT CURRENT

Solicitation # SPE7M1-27-T-0856

Solicitation SPE7M1-27-T-0856, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of two direct current motors under NSN 6105-01-665-6864. The requirement is categorized under NAICS code 333618. Delivery is expected by May 29, 2027, with a need ship date of April 6, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001), marking standards (MIL-STD-129), and technical quality requirements found in the DLA Master List. All quotes must be submitted via the DIBBS portal. Payment and invoicing are to be processed electronically through the Wide Area Workflow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L5-27-T-0437

Solicitation SPE7L5-27-T-0437 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 18 piston rings under NSN 2805-01-159-8959. The delivery requirement is set for 119 days after order, with a need ship date of March 9, 2027, and a final required delivery date of June 5, 2027. Delivery is FOB destination to DLA Distribution Jacksonville, Florida. The procurement may be subject to automated award and includes a price evaluation preference for HUBZone small business concerns. Items produced via additive manufacturing are ineligible for award. The contract mandates strict quality and technical compliance, requiring the supplier to provide a Certificate of Quality Compliance for each manufacturing lot. Quality systems must align with SAE AS9003 or ISO 9001, and sampling will follow MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951, RP001, and MIL-STD-129 for marking and labeling. Key regulatory requirements include CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

FRC MTU PARTS AND COMPONENT OVERHAULS

Solicitation # 70Z08027R17004B00

The United States Coast Guard Surface Forces Logistics Center is soliciting a requirements contract for the overhaul of MTU parts and components, specifically supporting 20V4000M93L series main diesel engines. The contract consists of five one-year ordering periods running from December 27, 2026, through December 26, 2031. Award will be made to a responsible quoter based on best value using a tradeoff process, where technical plans and past performance are considered significantly more important than price. Key deliverables include the overhaul of turbos, cylinder heads, starters, and coolers, as well as the provision of on-site technical support. All work must be performed using genuine OEM parts in accordance with specification P-233-2039, and the contractor must provide a letter from MTU verifying their status as an authorized distributor. Strict technical requirements are in place, requiring technicians to be MTU/RRSA Series 4000 Certified, with lead technicians meeting CM3 and CE3 standards. The contractor is responsible for all preservation, packaging, and bar-coding, including the use of MIL-C-104C compliant crates and hermetic sealing to ensure a minimum two-year shelf life. Proposals are due by November 16, 2026, and must include six specific attachments, including a technical plan, past performance record, and pricing. The contract is a Firm-Fixed-Price requirements contract with Economic Price Adjustment, and performance will primarily occur at the contractor's facility with shipments delivered F.O.B. destination to Coast Guard facilities.

POSTED

DEADLINE

Ultrasonic Parts Washer

Solicitation # W911S227U0030

Solicitation W911S227U0030 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of one ultrasonic parts washer and three associated parts washer baskets. The requirement is a Total Small Business Set-Aside under NAICS code 333618. The government is seeking a Graymills TUSR3626SLD-(B) 230V60/1 washer and TU-36BSKT baskets, or approved equals. Technical specifications for the washer include 14ga 304SS wetted surfaces, a fluid capacity of 118 gallons, 6,000 Watts peak ultrasonic power at 40 Khz, and overall dimensions of 50 inches length by 50 inches width by 75 inches height. Quotes must be submitted exclusively through the Procurement Integrated Enterprise Environment (PIEE) Solicitation module to be considered responsive. Offerors are required to provide a completed Buy American certification via Attachment 1 and specify an exact delivery time, with a government preference for delivery within 30 days on an F.O.B. destination basis. Award will be granted to the responsible offeror based on price and technical conformance. Those proposing equal products must provide descriptive literature, brand and model identification, and a detailed description of any modifications needed to meet the salient physical and performance characteristics. Payment will be processed through the Wide Area Workflow (WAWF) system.

W6QM Micc-Ft Drum

POSTED

about 17 hours ago

DEADLINE

in 6 days

AI Contract Overview

This subcontract involves the supply of a specialized 6-inch smooth bore, lightweight buoyant, and longitudinally reinforced rubber hose assembly for the Department of Defense Fluid Handling Division. The product must meet the specifications of NSN 4720013965194 and is intended for prime contractors delivering DLA Land and Maritime fluid handling contracts. The contractor is responsible for manufacturing or sourcing the assembly and performing a Contractor First Article Test in accordance with LAW SQAP013965194 to ensure all dimensions and material properties are met. Performance will take place in Jacksonville, Florida, with a response deadline of October 5, 2026.

General Info

Supply 6-inch rubber hose assemblies for DoD by October 5, 2026, in Florida.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

333618 - Other Engine Equipment Manufacturing

Place of Performance

JACKSONVILLE, FL, 32226-3404, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-430W.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONME

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 22

subcontract

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies a specialized nonmetallic hose assembly for prime contractors delivering DLA Land and Maritime fluid handling contracts. Manufactures or sources a 6-inch smooth bore, lightweight buoyant, longitudinally reinforced rubber hose meeting NSN 4720013965194. Performs Contractor First Article Test (FAT) per LAW SQAP013965194. Delivers one completed nonmetallic hose assembly meeting all specified dimensions and material properties.