Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of 7075-T6511 Aluminum Structural Angle

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and delivery of 7075-T6511 aluminum alloy structural angle for the Department of Defense, specifically under the Construction and Equipment MRO SVC I agency. The contractor is responsible for the full production cycle, including cutting to length, testing, certification, marking, and packaging. All materials must adhere to QQ-A-200/11 and SAE AMS4154S specifications, ensuring full traceability and compliance with MIL-STD packaging requirements. The project is categorized under NAICS code 331313 and will be performed in Cherry Point. Interested parties must submit their responses by August 24, 2026, following the solicitation posted on August 12, 2026.

General Info

Manufacture and deliver 7075-T6511 aluminum structural angle for DoD by August 24, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E9-26-T-3470.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ANGLE, STRUCTURAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 12

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, cut-to-length, test, certify, mark, package, and deliver aluminum alloy 7075-T6511 structural angle per QQ-A-200/11 and SAE AMS4154S specifications with traceability and MIL-STD packaging.

Similar Contracts

Same NAICS industry code

LITTER, NONRIGID, POLELE

Solicitation # SPE2DH-26-T-5988

This contract is for the procurement of three black, nonrigid, poleless shoulder-carried litters with quick release straps. The equipment must support a weight capacity of at least 450 lbs and meet specific size requirements, measuring 65 by 23 inches when unpacked and 10 by 7 by 1.5 inches when packed. The item is identified by NSN 6530016007741 and part number PHL-K-B from TacMed Solutions, LLC. As an FDA regulated Class I medical device, the supplier must comply with registration, listing, labeling, and GMP requirements, with marking adhering to Medical Marking Standard No. 1. Delivery is set for 84 days after order, with FOB destination shipping to the USA Med Mat Ctr EUR. Packaging must follow DLA requirements and MIL-STD-2073-1E to ensure the contents are protected during transit.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

BAG, EXTRICATION COL

Solicitation # SPE2DH-26-T-5966

This solicitation, issued by the Department of Defense Medical Supply Chain, seeks the procurement of two royal blue extrication collar carry bags under solicitation number SPE2DH-26-T-5966. The required items, identified by NSN 6530-01-584-3778, must feature separate inside compartments for straps or the head. Bidders are required to specify the country of origin and part number being supplied. The contract mandates compliance with DLA packaging and quality requirements, specifically referencing RP001 and RA001, and includes a provision for the removal of government identification from non-accepted supplies. Delivery is required within 20 days after receipt of the order, with the place of performance located at Holloman AFB. Responses are due by August 19, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

STRAP, IMMOBILIZATION, S

Solicitation # SPE2DH-26-T-5950

This contract is for the procurement of 10 spineboard immobilization straps, identified by NSN 6530-01-592-2625 and part number EM301. Each unit must be constructed of nylon polypropylene webbing and include a spider immobilization strap, a V strap for the neck, four cross straps, and one lateral strap. The delivery is set for destination in San Antonio, Texas, with a required delivery date of August 13, 2026, and a delivery window of five days after order. Compliance with DLA packaging and marking standards is mandatory, specifically adhering to Medical Marking Standard No. 1 and ASTM D3951. All items must be placed in sealed unit containers and shipped via the fastest traceable means, excluding parcel post. The contract specifies a zero percent quantity variance and requires adherence to the DLA Master List of Technical and Quality Requirements.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Aluminum Alloy Metal Sheet SupplyThis subcontract, issued by the Department of Defense through Construction & Equipment MRO SVC I, requires the supply of 77 shipments of aluminum alloy sheets. The materials must be 0.025 inches thick, measuring 36 by 96 inches with a T-6 temper. All sheets must be delivered with Mill-Material Certification and strictly adhere to SAE AMS4027P, ASTM B660, and ASTM B666 standards. The procurement is categorized under NAICS code 331313 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 11, 2026, with a response deadline of August 24, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Precision Aluminum and Magnesium Material SupplyThe Precision Aluminum and Magnesium Material Supply subcontract, issued by the Department of Defense through Construction & Equipment MRO SVC I, requires the procurement of aluminum and magnesium products. These materials must be supplied in whole-foot lengths of 10 to 12 feet and must adhere to strict quality and preservation standards, including MIL-STD-2073-1E, RP001, and ASTM B660. All items must feature correct manufacturer markings and National Stock Numbers. The contract is categorized under NAICS code 331313 and specifies Tinker AFB in Oklahoma as the place of performance. Interested parties must submit their responses by the deadline of August 24, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PAD, ABSORBENT, LITTE

Solicitation # SPE2DH-26-T-5946

This contract is for the procurement of lightweight and strong absorbent pads designed for the Absorbent Patient Litter System. These pads are engineered to absorb blood, body fluids, and other wet solutions and are compatible with all litter systems. The items are issued in packages of 15 units each, with a total quantity of two packages required for delivery within 20 days after the order. The supplier must adhere to commercial packaging and packing standards, ensuring each unit is in a sealed container to prevent damage during transit. All materials must be marked according to Medical Marking Standard No. 1 and comply with DLA packaging and quality requirements. As an FDA-regulated Class I device under Regulation 880.5300, the supplier must meet registration, listing, labeling, and GMP requirements, and must provide the source and part number during the bidding process.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

VALVE, SAFETY, STERIL

Solicitation # SPE2DH-26-T-5925

This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of one sterilizer safety valve, identified by part number 61301608100 and NSN 6530-01-546-3561. The contract requires delivery within 20 days after the order is placed, with the place of performance located in San Diego, California. The supplier must adhere to strict medical packaging and marking standards, specifically Medical Marking Standard No. 1, ensuring each unit is sealed in a protective container suitable for commercial shipping. Compliance with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements is mandatory. All materials must be marked according to the specified medical standards to ensure safe delivery and acceptance.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

HYGIENE KIT, PATIENT

Solicitation # SPE2DH-26-T-5880

The contract is for the procurement of two boxes of patient hygiene kits, with each box containing twelve units, under NSN 6530-01-621-4282, solicited through SPE2DH-26-T-5880 with a response deadline of August 17, 2026. Deliveries are required to be completed within five days after award and must be shipped to the Naval Medical Readiness Logistics Command at 565 Antrim Rd, Building 565, Cheatham Annex, Williamsburg, VA 23185-5830, with FOB destination terms applying. All units must be sealed in commercial packaging designed to prevent damage or breakage, and exterior shipping containers must ensure safe, low-cost delivery via common carrier, with export packaging used when necessary. Packaging and labeling must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for all medical acquisitions, requiring each item to bear the manufacturer date, expiration or retest date, and contract or lot number. Shelf-life requirements mandate a minimum of 60 days remaining from manufacture to delivery, with no more than 51 days elapsed from manufacture to government receipt. Hazard communication standards under 29 CFR 1910.1200 apply to any hazardous materials included, and all shipments must comply with DLA Packaging Requirements for Procurement and ASTM D3951. Sea transportation must utilize U.S.-flag vessels unless a waiver is obtained at least 45 days prior to sailing, with documentation of efforts to secure such vessels required. Payment must be processed via Wide Area WorkFlow, and contractors must be registered in SAM to ensure eligibility. The contract incorporates numerous FAR and DFARS clauses governing inspection at destination, safeguarding of covered defense information, cyber incident reporting, whistleblower protections, subcontractor compliance, and prohibition on acquiring certain telecommunications equipment. Offerors must provide their UEI and CAGE code if supplying covered defense equipment or services and must certify small business or socioeconomic status if claiming program eligibility. Pricing details are not provided in the solicitation, and no contract value is stated, though historical unit prices from prior awards exist but are not applicable. All submissions must be made electronically through the DIBBS portal, with no physical submissions permitted.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

DISPOSAL CONTAINER,

Solicitation # SPE2DH-26-T-5871

The contract requires the delivery of 12-gallon disposal containers for hypodermic needles and syringes, with a total quantity of three packages, each containing ten units, for delivery to Fort Bragg, North Carolina, within 20 days of order placement. The item is identified by NSN 6530-01-578-7142 and is procured under solicitation SPE2DH-26-T-5871 through the DLA Internet Bid Board System, with quotes due by August 17, 2026. All units must be packaged in commercial-grade sealed inner containers to prevent damage and shipped in exterior containers that ensure safe delivery at the lowest freight rate, adhering to DLA Packaging Requirements for Procurement RP001 and MIL-STD-2073-1E standards. Marking must follow Medical Marking Standard No. 1, which officially supersedes MIL-STD-129, and contractors must obtain the current MMS No. 1 guidelines from DLA Troop Support. Hazard communication labeling is mandatory under 29 CFR 1910.1200, with exceptions for materials governed by other federal acts, and offerors must submit hazard labels and Safety Data Sheets prior to award. The contract is subject to destination inspection under FAR 52.246-2 and electronic invoicing through WAWF, with no fast pay eligibility. The solicitation is for a simplified acquisition and may be awarded automatically, with price as the primary evaluation factor and HUBZone preferences applied unless waived. Compliance with cybersecurity requirements is enforced through DFARS 252.204-7012 and NIST SP 800-171 DOD Assessment Requirements, with deviation 2026-O0025. Additive manufacturing is prohibited unless explicitly authorized, and offers with unapproved alternatives or missing technical data will be disqualified. Contractors must maintain active SAM representations, including socioeconomic status, and affirm compliance with clauses governing whistleblower rights, disclosure of information, subcontracting, and prohibitions on Chinese military company products and hexavalent chromium. All contractual obligations are governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, and performance is FOB destination at Fort Bragg.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Aluminum Alloy Alclad Sheet Metal SupplyThe contract calls for the supply of precision aluminum alloy alclad sheet metal measuring 0.100 inches in thickness, with dimensions of 60 inches by 144 inches, in 2024-T3 temper, featuring a 0.0025-inch aluminum cladding layer. All materials must fully comply with the SAE AMS-QQ-A-250/5C and ASTM B666 industry standards to ensure consistent quality and performance. This is a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, as defined under FAR 19.5. The solicitation is managed by the Department of Defense through the Warner Robins office, with performance required at Robins AFB, Georgia, zip code 31098-1887. The North American Industry Classification System code is 331313, indicating the focus on aluminum rolling, drawing, and extruding. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with all submissions required through the DIBBS portal linked in the contract details.

POSTED

DEADLINE

Domestic Raw Material Supply (Aluminum/Steel)This contract seeks the supply of U.S.-sourced aluminum or steel materials to be used in the fabrication of military ladders, ensuring full compliance with the Buy American Act and the Berry Amendment, which mandate that all materials and components originate from the United States. The requirement is strictly for domestically produced metals, and bidders must document and verify the origin of all raw materials to meet federal procurement standards for defense-related products. The subcontract is set aside exclusively for Women-Owned Small Businesses, reflecting a targeted effort to support diverse suppliers within the defense industrial base. The solicitation is tied to NAICS code 331313, corresponding to aluminum rolling, drawing, and extruding, indicating the specific manufacturing processes relevant to the materials being procured. The place of performance is identified as Texarkana, with a zip code of 75507-5000, suggesting that final assembly or integration may occur at or near this location under DOD oversight. The contract opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, giving potential bidders approximately two weeks to prepare and submit proposals. It is issued under the Department of Defense through the RED RIVER RECEIVING BLDG, and interested parties must access the official DIBBS platform via the provided link to obtain full details and submit bids.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Aluminum Alloy Sheet Metal SupplyThe contract is for the supply of 98 units of aluminum alloy 7075-T6 sheet metal, requiring strict adherence to military and ASTM standards for material composition, mechanical properties, and dimensional tolerances. The material must meet precise technical specifications to ensure suitability for high-performance aerospace or defense applications, with all deliveries expected to comply with quality control protocols consistent with federal procurement requirements. The purchase is designated as a subcontract under NAICS code 331313, indicating fabrication of rolled metal products, and is managed by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and performance will take place at Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. While no specific point of contact or set aside provisions are detailed, the contract is accessible through the DIBBS portal, indicating an active procurement process under DoD supply channels. The contract does not indicate delivery timelines or payment terms but implies fulfillment must align with defense-industrial standards for urgent operational needs.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Traffic Control and Signage

All Other Support Services

POSTED

about 20 hours ago

DEADLINE

Environmental Compliance and Monitoring

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Concrete Supply for Infrastructure

Ready-Mix Concrete Manufacturing

POSTED

about 20 hours ago

DEADLINE

Bridge Structural Steel Fabrication

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Highway Construction and Earthwork

Highway, Street, and Bridge Construction

POSTED

about 20 hours ago

DEADLINE

Logistics and Delivery Coordination (WAWF-Compliant)

General Freight Trucking, Long-Distance, Truckload

POSTED

about 20 hours ago

DEADLINE

Hazard Communication and Labeling Compliance

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging and Preservation

Sanitary Paper Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Identification Markers

Office Supplies (except Paper) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Domestic Manufacturing & Buy America Compliance Verification

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

Hazardous Material Compliance & Labeling Services

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Rubber Sheet, Solid (NSN 9320006413051) Supply

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 20 hours ago

DEADLINE