This Government Contract opportunity from Department Of Defense was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Acrylic Transparency Material (ACRIVUE 350S)

Closed

Federal

Submission Closed05/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M8-26-T-6492

This solicitation, identified as SPE7M8-26-T-6492, is issued by the Department of Defense Electrical Devices Division for the procurement of 98 retaining rings under NSN 5325-01-546-6201. The contract falls under NAICS code 326130 and requires delivery within 136 days after receipt of order. Performance is designated for San Diego, California, and the request for quotations is open until September 21, 2026. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific AQLs assigned to critical, major, and minor attributes. Additionally, any alternate offerors are required to provide a complete data package for both approved and alternate parts.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

SHEET, NONMETALLIC, PROT

Solicitation # SPE8E5-26-T-4320

Contract SPE8E5-26-T-4320 is a solicitation issued by the Defense Logistics Agency for the procurement of nonmetallic protective sheets, identified by NSN 9390017383217 and part number 703-8345733-012-006. The requirement consists of two separate line items, each for a quantity of two units, totaling four units. The first item is destined for the USS GEORGIA SSGN 729 with a required delivery date of September 2, 2026, and the second item is destined for the USS FLORIDA SSGN 728 with a required delivery date of July 16, 2026. The contract specifies a delivery timeframe of 20 days after the order and requires delivery FOB destination, with both inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA packaging requirements. The solicitation incorporates technical and quality requirements from the DLA Master List and specifies that shipments must be made via the fastest traceable means, explicitly prohibiting the use of parcel post.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # N0010425QFF37

This solicitation is for the procurement of Molded Inserts for use in critical shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific NAVSEA toxicity and flammability requirements. The contract mandates comprehensive material traceability, mercury-free construction, and a one-year warranty. Key requirements include the submission of a Certificate of Compliance and the performance of government source inspection via DCMA. All certification data must be submitted to the Portsmouth Naval Shipyard via Wide Area Workflow for review and acceptance prior to the final delivery of material. The deadline for the receipt of offers is October 30, 2026, at 4:30 PM EST.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Pressure-Sensitive Adhesive Plastic Sheets (NSN 9330-01-433-4582)

Defense Logistics Agency

POSTED

DEADLINE

Vinyl SheetingThe Department of Justice, through Federal Prison Industries, has issued a forecast for the procurement of vinyl sheeting. This opportunity is categorized as full and open and unrestricted, meaning it is available to all qualified bidders regardless of business size. The project falls under NAICS code 326130 and is scheduled for posting on September 6, 2026. The place of performance for this contract is located in Cumberland, Maryland. Interested parties can coordinate with Kimberly Armfield as the primary point of contact or Robert L. Connolly for small business specific inquiries. Further details regarding this opportunity are available through the Department of Justice forecast contracting portal.

Inc Federal Prison Industries

POSTED

DEADLINE

Supply of 3M Pressure Sensitive Adhesive Plastic Strips (NSN 9330-01-428-7082)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE85-26-T-4140

Solicitation SPE8E5-26-T-4140 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 30 plastic strips under NSN 9330008643419. The requirement specifies part number 535221-17, associated with Hamilton Sundstrand Corporation and Derco Aerospace, Inc. The delivery is set for 167 days after award, with a need ship date of March 1, 2027, and a required delivery date of June 23, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and safeguarding covered defense information. All quotations must be submitted via the DLA Internet Bid Board System by September 14, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4169

This solicitation, identified as SPE8E5-26-T-4169 and issued by the Department of Defense via the Depot Oklahoma agency, is for the procurement of 50 plastic sheets under NSN 9330-00-993-8726. The required specifications for the plastic sheets include a width of 29.5 inches, a length of 36.0 inches, and a thickness of .203 inches. The procurement is fully competitive and falls under NAICS code 326130, with a delivery requirement of 167 days after the order is placed. Performance is to take place at Tinker AFB, Oklahoma. The contract incorporates several critical technical and quality requirements, including DLA packaging requirements and the potential application of covered defense information. Inspection and acceptance are to occur at the origin, and the contractor must adhere to first article approval processes and testing samples in accordance with MIL-I-24768 and applicable specification sheets. Quotations must be submitted through DIBBS by September 14, 2026, and the procurement is subject to the DLA Master Solicitation for Automated Simplified Acquisitions, including Buy American requirements and HUBZone preferences.

POSTED

DEADLINE

Fiberglass Filament Supplier

Defense Logistics Agency

POSTED

DEADLINE

Thermoplastic Marking Material Supply

POSTED

DEADLINE

CORE MATERIAL, CELLULAR

Solicitation # SPE8E5-26-Q-0422

This solicitation from the Department of Defense, specifically Depot Hill, is for the procurement of 14 sheets of cellular core material under solicitation number SPE8E5-26-Q-0422. The material is specified as expanded cell condition with a nominal cell size of 3/16 inch and a nominal cell depth of 2.000 inches. It must have a nominal density rating of 2.0 pounds per cubic foot, a maximum density of 2.2 pounds per cubic foot, and a maximum service temperature limit of 250 degrees Fahrenheit. The dimensions are set at 48 inches in the ribbon direction and 96 inches in the transverse direction. The contract is subject to several strict regulatory and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It mandates compliance with Qualified Products Lists or Qualified Manufacturers Lists and is subject to stringent export controls under ITAR and EAR regulations. Technical data distribution is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Delivery is required within 60 days after receipt of order.

POSTED

DEADLINE

Pavement Marking & Striping (MMA & Thermoplastic)

Caltrans, District 3 - Marysville/Sacramento

POSTED

25 days ago

DEADLINE

N/A

AI Contract Overview

This contract involves the manufacture or supply of eight units of ACRIVUE 350S acrylic transparency sheets, each measuring 48 inches by 48 inches with a thickness of 0.75 inches. These sheets must comply with the MIL-PRF-25690 military specification, ensuring their suitability for laboratory testing purposes. The material provided under this contract is designated for non-flight and non-production use, indicating its application is limited to testing environments rather than operational or manufacturing settings. Issued by the Department of Defense through the DLA Receiving Officer at Naval Base Coronado, this subcontract falls under the NAICS code 326130, which relates to plastic sheet and film manufacturing. The solicitation was posted on May 15, 2026, with a response deadline of May 18, 2026, signaling a rapid turnaround for submissions. While no specific location for performance or contact details are provided, the procurement emphasizes compliance with military standards and timely delivery to support laboratory testing needs.

General Info

Supply of eight MIL-PRF-25690 acrylic sheets for laboratory testing, under DLA, rapid submission required.

Agency

Department Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDGView Agency

NAICS

326130 - Laminated Plastics Plate, Sheet (except Packaging), and Shape ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPEFA1-26-Q-0066.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ACRYLIC TRANSPARANCY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 15

subcontract

Response DeadlineMay 18

Deadline has passed

Submission Closed

05/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture or supply of eight units of ACRIVUE 350S acrylic transparency sheets (48” x 48” x 0.75”) compliant with MIL-PRF-25690 for laboratory testing. Material is non-flight and non-production use.