Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Raw Materials for Access Covers

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified aerospace-grade raw materials used in the production of access covers for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires the sourcing and delivery of raw stock that strictly adheres to Boeing P/N 90-3386-1 material grade and temper specifications. To ensure quality and regulatory compliance, the provider must furnish Material Test Reports and Certificates of Conformance in accordance with the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, with the place of performance located at Tinker AFB. Interested parties should note the response deadline of October 20, 2026, for this requirement categorized under NAICS code 332431.

General Info

Supply aerospace-grade raw materials for DLA access covers at Tinker AFB by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332431 - Metal Can Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-0589.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COVER, ACCESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw materials for prime contractors delivering DLA Weapons Support ASC aerospace components. Sources and delivers raw stock meeting Boeing P/N 90-3386-1 material grade and temper specifications. Provides Material Test Reports (MTRs) and Certificates of Conformance (CoC) in compliance with the Buy American Act. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Alclad Aluminum Sheet Metal SupplierThis subcontract involves the supply of 41 Alclad aluminum metal sheets to prime contractors supporting Department of Defense supply contracts through Construction and Equipment MRO SVC I. The required materials must feature a 0.0013 inch cladding on both sides, an overall thickness of 0.032 inches, and dimensions of 48 inches wide by 144 inches long. The supplier is responsible for ensuring all materials comply with RA001 technical and quality requirements and are packaged according to MIL-STD-2073-1E. Performance for this contract is centered at Robins Air Force Base, and the solicitation is categorized under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supplier of 7075-T6 MRS Aluminum Sheet MetalThis subcontract, issued by the Department of Defense through the DLA Fleet Readiness Center, seeks a supplier to provide 14,400 units of 7075-T6 MRS aluminum sheet metal. The material must be sourced or manufactured to specific dimensions of .040 inches by 48 inches by 144 inches and must strictly adhere to SAE AMS4049 standards and Minimum Residual Stress properties. The contract requires rigorous quality control, including sampling per MIL-STD-1916 and the provision of a Certificate of Quality Conformance. Packaging must comply with ASTM D3951 and MIL-STD-129 standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332431, intended for prime contractors supporting DLA Aviation supply contracts.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

in about 5 hours

Aluminum Alloy 7075-T6 Sheet ProductionThis subcontract involves the production of 156 specialized aluminum alloy metal sheets for prime contractors supporting Department of Defense DLA supply contracts. The sheets must measure 0.125 inches by 48 inches by 144 inches and strictly conform to Alloy 7075 Temper T6 and SAE AMS4045M standards. Manufacturing requires the use of industrial smelting, rolling facilities, and precision cutting equipment to ensure all technical specifications are met. The contractor must maintain strict compliance with ASTM B660, MIL-STD-2073-1E, MIL-STD-129, and ASTM B666, providing a Certificate of Quality Compliance upon delivery. Performance will take place at Robins Air Force Base. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Alloy Plate Supplier (NSN 9535-00-975-2727)This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the supply of 13 precision-cut aluminum alloy plates under NSN 9535-00-975-2727. The plates must be fabricated to dimensions of 0.250 inches by 36 inches by 96 inches and must strictly adhere to ASTM B660 and ASTM B666 standards. Performance will take place at Hill AFB, with all deliverables requiring Mill-Material Certification and comprehensive quality compliance documentation. The supplier must ensure all items are marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards to support prime contractors delivering DLA supply contracts. The opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Aerospace-Grade Ducting MaterialsThis subcontract, titled Supply of Aerospace-Grade Ducting Materials, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. The contract requires the provision of certified aerospace-grade alloys or composites specifically meeting the requirements of Drawing NR 77272 901–325–423. The selected supplier is responsible for delivering these raw materials to the fabricator while ensuring full material traceability and providing mill test reports from approved sources. Performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the materials and the agency involved, the supplier must maintain strict compliance with ITAR and EAR export controls. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Fabrication of Round Cans (NSN 8145-01-727-6255)This subcontract involves the fabrication of 13,000 round metal cans under NSN 8145-01-727-6255 for prime contractors supporting DLA Troop Support projects. The manufacturing process must strictly adhere to reference drawing 18876 11465617 and the DLA Master List of Technical and Quality Requirements. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The project is managed by Construction and Equipment Containers for the Department of Defense under NAICS code 332431. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory for all materials used. The final deliverable consists of 13,000 completed units.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8ED-27-Q-0041

Solicitation SPE8ED-27-Q-0041 is a request for quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 13 units of Round Cans, identified by NSN 8145-01-727-6255. The items must be delivered by August 10, 2027, with a delivery lead time of 90 days after order. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements, and the items must adhere to specific technical data packages and drawings, including reference drawing 18876 11465617. Packaging must comply with RP001 DLA Packaging Requirements for Procurement and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance is strictly managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The solicitation incorporates several critical federal and defense clauses, including DFARS 252.204-7012 for safeguarding covered defense information and various Buy American Act certifications. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations must be submitted to the Philadelphia office by October 20, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Silver Plating Material SupplyThis subcontract involves the supply of high-purity silver plating chemicals and materials to support prime contractors working with the DLA Weapons Support Active Devices Division. The scope of work specifically requires the provision of industrial grade silver plating solutions or bullion that meet the S designation for part number F09B250V3AS. All delivered materials must be certified and accompanied by the necessary Certificates of Conformance and Material Safety Data Sheets. The contract is categorized under NAICS code 332431 and is managed by the Department of Defense. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 23, 2026, to ensure all requirements for the delivery of certified silver plating materials to the manufacturer are met.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Structural MaterialsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the supply of certified aerospace-grade structural alloys or composites for prime contractors. The materials must be sourced according to Sikorsky technical data for part number 71500-22104-058 and delivered to Tracy, California. The contractor is required to provide full supply chain traceability, including Mill Test Reports and Material Certifications. Additionally, all deliverables must strictly adhere to the Buy American Act and DFARS domestic sourcing regulations to ensure compliance with federal procurement standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Conductive Materials for RF Contact StripsThis subcontract involves the supply of high-conductivity raw materials and semi-finished plated metal strips, specifically Beryllium Copper or silver-plated alloys, to support prime contractors fulfilling DLA supply contracts. The materials must meet the specifications for NSN 5940-00-168-8134 and be delivered as certified raw material stock. To ensure full compliance, the provider must furnish Material Certifications and Mill Test Reports that adhere to the Buy American Act and the Berry Amendment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332431. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 20, 2026, for this procurement of conductive materials intended for RF contact strips.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Silver Plating Material SupplyThis subcontract opportunity involves the supply of high-purity silver or silver-plating solutions to support prime contractors working with the DLA Weapons Support Active Devices Division. The materials must strictly adhere to technical standards for MIL-PRF-15160 compliance and include Certificates of Conformance to verify military grade specifications. Additionally, all provided materials must comply with Berry Amendment domestic sourcing requirements. The contract is categorized under NAICS code 332431 and is associated with the Department of Defense. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, following the posting date of October 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Primer and Topcoat ApplicationThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC, involves the application of industrial primer and topcoat for prime contractors. The scope of work focuses on delivering fully painted and finished shims that adhere to strict military thickness and adhesion standards. To ensure quality and durability, the contractor must perform daily adhesion checks following ASTM 3359 Method B, conduct thickness measurements, and complete 336-hour salt spray corrosion testing to verify the absence of rust and minimal blistering. The project is categorized under NAICS code 332431 and will be performed in New Cumberland. A critical requirement for this contract is JCP certification, which is necessary for the handling of technical data. Interested parties should note the response deadline of October 20, 2026, for this precision coating engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Dial Indicating Pressure GagesThis subcontract involves the procurement or manufacture of 82 specialized dial indicating pressure gages for prime contractors supporting DLA supply contracts. The required units must adhere to Thuemling Industrial Products Inc part number 4306148 and NSN 6685-01-506-1061. All items must be delivered FOB Origin to DLA Distribution facilities, with performance taking place in Barstow, California. Strict compliance with technical standards is required, including packaging and marking per MIL-STD-129, RP001, and ASTM D3951. Quality acceptance will be governed by MIL-STD-1916 or ASQ H1331. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline of October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for aerospace components destined for the DLA Weapons Support ASC. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. To ensure the survival of components during transit, the contractor must utilize approved MIL-SPEC cushioning and preservative materials. The project specifically entails the packaging and palletization of three units for delivery to Tinker AFB. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Cable Breakout Adapters (NSN 5935-01-668-9632)This subcontract involves the manufacture or sourcing of eight Cable Breakout Adapters, specifically GE Aviation Systems part number 765090-006 under NSN 5935-01-668-9632. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All finished units must be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To ensure compliance, the contractor must maintain an ISO 9001:2015 quality system and meet CMMC Level 2 security requirements. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects at Hill AFB. The scope of work involves executing specialized packaging and marking for shipping containers, specifically adhering to MIL-STD-2073-1E, RP001, and MIL-STD-129. Key technical requirements include the application of Special Marking Code 06 for delicate instruments, the use of preservation method Pres Mthd+41, and the utilization of MIL-SPEC marking equipment and approved cushioning materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 339999. The contract requires the delivery of fully packaged and marked containers that are ready for immediate transport. Interested parties should note the response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

Power Transformer Supplier (Honeywell PN 51080031-1)This subcontract involves the procurement of 39 power transformers, specifically Honeywell Aerospace International Inc. part number 51080031-1, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act. All units must undergo verification via precision testing equipment to ensure power specifications are met, with a requirement for zero non-conformances based on MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The final delivery of the 39 transformers is designated as FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 335999 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Pressure and Differential Pressure IndicatorsThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, involves the procurement of 383 pressure and differential pressure indicators. The contractor is responsible for manufacturing or sourcing Pall Aeropower Corporation part number RC914UH096, identified by NSN 6620010152391. All units must be delivered FOB Origin to Hill AFB, with strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334517. To be eligible, providers must maintain a quality management system compliant with SAE AS9003 or ISO 9001 and provide a CMMC Level 2 self-assessment. The response deadline for this requirement is October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and palletization for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work focuses on the secure handling of fragile aircraft optical components, requiring strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor must utilize MIL-SPEC marking equipment and approved cushioning and dunnage materials to ensure the integrity of the lenses. The final deliverables are to be securely packaged and marked for FOB Origin shipment to DLA Distribution Jacksonville, located in Jacksonville, Florida. This requirement falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Aircraft Lens Fabrication (NSN 6220014741863)This subcontract involves the fabrication and delivery of 76 aircraft lenses for prime contractors supporting DLA Weapons Support ASC projects. The lenses must be manufactured according to NSN 6220014741863 technical specifications, utilizing precision grinding, polishing, and coating equipment. Performance is subject to Critical Application Item standards and the DLA Master List of Technical and Quality Requirements. The project requires strict adherence to MIL-STD-1916 or ASQ H1331 quality assurance standards and full compliance with the Buy American Act. Managed by the Department of Defense under NAICS code 336411, the work is to be performed in Jacksonville. The response deadline for this opportunity is October 23, 2026.

Aircraft Manufacturing

POSTED

about 19 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging components according to ASTM D3951 and RP001 DLA standards, with all marking and labeling performed in compliance with MIL-STD-129. Additionally, the contractor is responsible for coordinating FOB Origin shipping for critical aviation components to ensure they are shipment-ready for DLA Distribution. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project is categorized under NAICS code 488510. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Seal Sleeves (NSN 1615002008060)This subcontract involves the manufacture and supply of 29 precision-manufactured seal sleeves for prime contractors supporting DLA supply contracts. The parts must be produced according to Bell Textron P/N 204-012-107-001 and NSN 1615002008060 specifications, with quality assurance conducted under MIL-STD-1916 or ASQ H331 Zero-based sampling. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336411 for the Department of Defense. The contractor is required to maintain CMMC Level 2 self-assessment and possess the necessary capabilities for handling Controlled Unclassified Information. The procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 23, 2026.

Aircraft Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Air Regulator Boots (NSN 5342006010748)This subcontract involves the manufacture or procurement of 42 air regulator boots, specifically Honeywell part number 110662-1 (NSN 5342006010748), for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The items must be delivered FOB Origin to Cherry Point and must strictly adhere to the Buy American Act and Berry Amendment. The contractor is required to maintain ISO 9001:2015 certification and ensure compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging meeting ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS