Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace Part PN 706963 (NSN 1650-00-133-9481)

Active

Federal

Response Deadline11/20/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 39 units of aerospace component PN 706963, identified by NSN 1650-00-133-9481, for prime contractors supporting DLA Weapons Support. The selected provider is responsible for the manufacture or sourcing of the parts, ensuring they meet aerospace-grade standards, applying IUID marking, and conducting inspection and acceptance at the point of origin. All deliverables must be shipped to Tinker AFB in Oklahoma. The contract is managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City agency, falling under NAICS code 336413. Strict compliance with FAR 52.246-15 is required for the provision of a Certificate of Conformance. Interested parties must submit their responses by the deadline of November 20, 2026.

General Info

Procure 39 aerospace components PN 706963 for DLA Weapons Support, delivered to Tinker AFB.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-27-R-0024.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Housing, Mechanical

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies aerospace component PN 706963 (NSN 1650-00-133-9481) for prime contractors delivering to DLA Weapons Support. Manufactures or sources the part, applies IUID marking, and performs inspection and acceptance at point of origin. Requires aerospace-grade manufacturing capabilities and compliance with FAR 52.246-15 for Certificate of Conformance. Delivers 39 units to Tinker AFB, OK.

Similar Contracts

Same NAICS industry code

Aviation Component Parts Supply (Flap Skew Detection)This subcontract for Aviation Component Parts Supply focuses on providing replacement parts and critical components for Flap Skew Detection units to support prime contractors on NAVSUP Weapon System Support projects. The scope of work involves manufacturing or sourcing components compatible with part number 9000421-3, ensuring all items meet original equipment manufacturer specifications and approved drawings. The contractor is required to provide certification of origin and maintain strict compliance with DFARS 252.225-7000 and 252.225-7020 regarding domestic end products. Performance for this Department of Defense effort is based in Philadelphia, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supplier of APU Electronic Components (NSN 7RH 5998-01-621-9059)This subcontract involves the supply of newly manufactured spare electronic components for Auxiliary Power Units used in P-8 and P-3 platforms to support DLA Aviation supply contracts. All components must be produced according to AS/EN/JISQ 9100 standards, and the use of refurbished materials is strictly prohibited. The supplier is responsible for providing warranted parts accompanied by FAA Form 8130-3 Airworthiness Approval Tags and ensuring IUID reporting is completed via WAWF. Logistical requirements mandate that all items be packed and marked in compliance with MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130. This opportunity is managed under NAICS code 336413 for the Department of Defense via DLA Aviation in Philadelphia. Interested parties must submit their responses by the deadline of November 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aerospace Wiring & Harnessing ServicesThis subcontract for Aerospace Wiring and Harnessing Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves the removal of prohibited wiring and the installation and replacement of electrical wiring within probe assemblies, specifically utilizing SAE-AS22759 series aerospace-grade wire. To ensure technical compliance, all personnel performing the work must be certified according to IPC/EIAJ-STD-001C paragraph 5.1.4. The contract falls under NAICS code 336413 and requires the delivery of fully certified wiring installations.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 hour

NRP/NSPR Module Assembly Overhaul and RepairThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the comprehensive overhaul and repair of flight-critical NRP/NSPR Module Assemblies. The scope of work includes the teardown, evaluation, cleaning, troubleshooting, and reassembly of these modules, as well as necessary repairs and upgrades performed in accordance with technical publications to ensure all units are delivered in Ready for Issue condition. To qualify for this project, the contractor must possess a specialized facility equipped for flight-critical electronics repair and maintain IPC/EIAJ-STD-001C soldering certification. The opportunity is categorized under NAICS code 336413, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Flight-Critical Fuselage Component FabricationThis subcontract for Flight-Critical Fuselage Component Fabrication involves the precision manufacturing and assembly of a fuselage component for Navsup Weapon Systems Support. The scope of work includes precision machining, structural assembly, and the fabrication of aerospace-grade alloys specifically for NSN 1RM 1560-01-736-4870 P8, following the provided technical data package. The project requires strict adherence to quality and security standards, including ISO 9001, DFARS 252.204-7012 compliance, and Government Source Approval. The final deliverable is one completed fuselage component. The solicitation was posted on October 21, 2026, with a response deadline of November 20, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Flight Control Computer Repair ServicesThis subcontract for Flight Control Computer Repair Services involves the teardown, evaluation, repair, and modification of Flight Control Computers (NSN 6615-01-432-2467) to support NAVSUP Weapon Systems Support Philadelphia projects. The selected contractor is responsible for delivering 14 Ready for Issue units accompanied by historical record files, ensuring all work includes rigorous acceptance testing and quality conformance examinations utilizing SAE-AS22759 series wire. To qualify, the provider must maintain ISO 9001 or SAE AS9100 certification and adhere to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. This Department of Defense requirement falls under NAICS code 336413, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Interior Lining Panel ManufacturingThis subcontract involves the manufacture or procurement of one interior lining panel, identified as NSN 1RD 1680-01-667-2318 H5, for prime contractors working on Navsup Weapon Systems Support projects. The selected provider must ensure the panel is machine-readable and perform IUID programming in strict accordance with MIL-STD-130 standards. To be eligible, the contractor must maintain ISO9001 quality management certification and be listed as an approved source within the NAVSUP WSS Source Approval Brochure. The project falls under NAICS code 336413, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

EFIS Control Panel Manufacturing and SupplyThis subcontract involves the manufacturing and supply of EFIS Control Panels for prime contractors supporting Department of Defense aviation projects through the Pa DLA Aviation At Philadelphia. The scope of work requires the production or procurement of components that strictly adhere to NSN 1680-01-585-4994 P8 and reference numbers 5N582 4082730-905 and 58960 4082730-905. Deliverables include the physical control panels along with the necessary certification of conformance. To be eligible, providers must maintain AS/EN/JISQ9100 certification and ensure full compliance with the Buy American Balance of Payments Program. The opportunity falls under NAICS code 336413, with a response deadline set for November 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 1 month

P8 Heat Exchanger Replacement Parts and MaterialsThis subcontract involves the procurement of OEM or approved equivalent replacement parts and components to support NAVSUP Weapon Systems Support projects. The primary objective is to provide the necessary materials to restore P8 Air Heat Exchangers, specifically part number 2215280-3, to ready-for-issue condition. All supplied components must be delivered to the designated repair facility and must strictly adhere to MIL-STD-130 standards for part marking. To ensure aircraft safety and compliance, all delivered materials must be certified for aircraft use and accompanied by a Certificate of Conformance. This effort falls under NAICS code 336413 and is managed under the Department of Defense. The response deadline for this opportunity is November 23, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

P8 Air Heat Exchanger Repair and OverhaulThe P8 Air Heat Exchanger Repair and Overhaul subcontract, issued by the Department of Defense under Navsup Weapon Systems Support, involves the teardown, evaluation, repair, and modification of COTS air heat exchangers. The selected contractor is responsible for executing all repairs according to technical publications and drawings, performing final testing, and applying MIL-STD-130 markings to ensure all units are delivered as restored and ready for issue with the required FAA Form 8130-3. To be eligible, contractors must hold status as an OEM, an aircraft prime, or an FAA-certified repair station, and must maintain ISO 9001 or SAE AS9100 certification. This opportunity falls under NAICS code 336413, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supply of Metering Fuel Pump (NSN 2915-01-547-5283 KF)This subcontract involves the procurement and delivery of NSN 2915-01-547-5283 KF metering fuel pumps to prime contractors supporting DLA Aviation at Philadelphia. The selected provider must be a government-approved source of supply with ISO 9000 certification and is required to submit authorized distributor letters on official company letterhead. All deliverables must adhere to strict military standards, including packaging per MIL-STD-2073 and labeling per MIL-STD-129 and MIL-PRF-61002. Requirements specify the use of water-resistant materials and ISPM 15 compliant wood for shipping. The contract was posted on October 21, 2026, with a response deadline of November 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Electro-Mechanical Actuator Supply (NSN 7RH 1680-01-358-6812 EK)This subcontract involves the manufacture or procurement of electro-mechanical actuators under NSN 7RH 1680-01-358-6812 EK for prime contractors supporting DLA Aviation. The Department of Defense requires that all actuators be delivered with at least 85 percent of their remaining shelf-life and feature Type I or Type II markings in accordance with MIL-STD-129. To be eligible, providers must maintain an ISO 9000 quality system, hold government-approved source of supply status, and ensure compliance with DFARS 252.209-7010 CSI. The opportunity is categorized under NAICS code 336413, with a response deadline set for November 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Supply of Branched Wiring Harnesses (PN: 713447E)This subcontract involves the supply of 33 branched wiring harnesses, specifically part number 713447E, for prime contractors supporting DLA Weapons Support and US Air Force aerospace projects. The contractor is responsible for the manufacture or procurement of these units using aerospace-grade wiring and connectors, and must maintain approved source status for the specific part. The contract mandates strict adherence to military standards, including IUID marking per MIL-STD-130 and specific packaging requirements outlined in MIL-STD-129 Rev R and MIL-STD-2073-1 Rev E. Managed under NAICS code 334418, the project is overseen by the Department of Defense through the DLA Aviation office in Oklahoma City.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supply of Aerospace-Grade Specialty MetalsThis subcontract opportunity involves the supply of raw aerospace-grade specialty metals to prime contractors supporting Department of the Air Force projects. The scope of work includes the sourcing and delivery of certified alloys, specifically titanium, stainless steel, and nickel alloys, ensuring all materials strictly adhere to DFARS 252.225-7009 requirements. All delivered raw materials must be accompanied by official Mill Test Reports to verify certification and quality. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract falls under NAICS code 423510. The solicitation was posted on October 21, 2026, with a response deadline set for November 20, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in about 1 month

IUID Marking and SerializationThis subcontract, titled IUID Marking and Serialization, involves providing Unique Identification marking services for prime contractors working on Department of the Air Force projects. The selected provider will be responsible for applying permanent markings to components using laser etching or data matrix techniques, ensuring all work strictly adheres to MIL-STD-130 standards. The scope of work requires the use of IUID-compliant marking equipment and specialized registration software to deliver permanently marked components along with their corresponding registered IUID data. This opportunity is associated with the Department of Defense through the Ok DLA Aviation At Oklahoma City, with a response deadline set for November 20, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Manufacture of Linear Direct Valve ComponentsThis subcontract involves the manufacture of physical components for the Linear Direct Valve intended for Department of the Air Force projects. The scope of work includes precision machining, fabrication, and assembly of valve components according to NSN 4810-00-818-0440HS. The contractor is responsible for delivering either finished individual components or fully assembled valve units. To ensure compliance and quality, the contractor must utilize specialty metals that adhere to DFARS 252.225-7009 standards and maintain either AS9100 or ISO 9001:2015 quality system certification. This opportunity is managed under NAICS code 332710 for the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of November 20, 2026.

POSTED

about 8 hours ago

DEADLINE

in about 1 month

ShroudSegmentTurb_End_Item_F100_NSN_2840013214450NZ_PN_4076790-01

Solicitation # SPRTA127R0029

Solicitation SPRTA1-27-R-0029, issued by the Department of Defense via DLA Aviation at Oklahoma City, seeks the procurement of Linear Augmentors (NSN 2840-01-321-4450NZ, PN 4076790-01) for the F-100 Engine. These nickel alloy components are used to support and secure the rear compressor variable inlet vanes. The requirement consists of a base quantity of 16 units, with a maximum potential quantity of 27. The estimated issue date is October 21, 2026, with a response deadline of November 23, 2026. RTX Corp is listed as a qualified source. This acquisition is subject to strict Manufacture Qualification Requirements for Propulsion Critical Safety Items and Critical Application Items. Potential sources must obtain Engineering Support Activity approval by submitting a comprehensive Source Approval Request and maintaining a valid Company Profile. Required documentation includes an Engineering Data List, detailed production travelers, and a Sub-Tier Supplier list. Quality assurance certifications such as ISO 9001, AS9100, or NATO AQAP-2070 are mandatory for the prime contractor and sub-tier suppliers, while specific industrial processes may require NADCAP or OEM certification. Export control applies to this procurement, and the government is not utilizing FAR Part 12 commercial item policies.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Wiring Harness, Branched

Solicitation # SPRTA1-27-R-0025

Solicitation SPRTA1-27-R-0025 is a request for proposal issued by the Defense Logistics Agency Weapons Support at Oklahoma City for the procurement of 33 branched wiring harnesses, part number 713447E and NSN 6150-01-211-8062. These components are used in B-1 aircraft to regulate CSD output speed and switch relay temperature and oil pressure to the engineering panel. The acquisition is intended as a firm fixed price contract against Basic Ordering Agreement SPE4A1-25-G-0027, with a requested delivery date on or before October 30, 2027, to Tinker AFB, Oklahoma. The procurement is not set aside, and the government is utilizing commercial item policies under FAR Part 12. Qualified sources include Hamilton Sundstrand Corporation, and contractors must be approved sources. Proposals are due by November 20, 2026, and will be evaluated based on price and past performance. Technical requirements include compliance with MIL-STD-130 for item unique identification and MIL-STD-2073-1 and MIL-STD-129 for packaging and marking. Inspection and acceptance will occur at the origin.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Housing, Mechanical

Solicitation # SPRTA1-27-R-0024

Solicitation SPRTA1-27-R-0024 is a request for proposal for the procurement of Mechanical Housings (NSN 1650-00-133-9481, PN 706963) for use on B-52 aircraft. The government seeks a quantity of 39 units, with a range between 10 and 59, to be delivered to Tinker AFB, OK, on or before October 30, 2027. These housings, constructed from magnesium and steel alloys, serve to house internal constant speed drive components and provide the mating surface for the generator interface. The procurement is being conducted by the Defense Logistics Agency Weapons Support at Oklahoma City as a firm fixed price contract against Basic Ordering Agreement SPE4A1-25-G-0027. The solicitation was issued on October 21, 2026, with a response deadline of November 20, 2026. While the acquisition is not set aside for small businesses, the government is utilizing FAR Part 12 policies for commercial items and may negotiate with a limited number of sources under FAR 6.302. Qualified sources include Hamilton Sundstrand Corporation, and contractors must be approved sources. Key requirements include the provision of a Certificate of Conformance per FAR 52.246-15 and adherence to Unique Identification (UID) requirements. Evaluation will be based on the best price and delivery proposal, with inspection and acceptance occurring at the point of origin.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

VALVE, LINEAR, DIRECT

Solicitation # SPRTA1-27-Q-0023

Solicitation SPRTA1-27-Q-0023 is a firm fixed price request for quotation issued by the Department of Defense, specifically DLA Aviation at Oklahoma City, for the procurement of two new manufacture Linear Direct Valves. These aluminum alloy hydraulic control selector valves, identified by NSN 4810-00-818-0440 and part number 52657-4 from OEM Hydro-Aire Aerospace Corp, are intended for a Foreign Military Sales requirement under Case K7-D-KEV. The required delivery date for the items is August 4, 2029, with shipping and acceptance terms set as FOB Origin. The contract mandates strict adherence to quality and marking standards, requiring a quality system compliant with AS9100 or ISO 9001:2015. Items must be packaged according to MIL-STD-2073-1 Revision E, using heat-treated debarked wood for packaging, and marked per MIL-STD-129 Revision R. Unique Identification is required following MIL-STD-130, specifically using Construct 2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This procurement is not a small business set-aside, and quotations were due by November 20, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Fuel Control, AfterB (3D)

Solicitation # SPRTA127R1883

The Department of Defense, through the DLA Aviation office at Oklahoma City, is issuing a pre-solicitation for the procurement of Fuel Control, AfterB spares for the F100 engine under solicitation number SPRTA127R1883. The requirement consists of 36 aluminum units, with a quantity range between 9 and 54, identified by NSN 2915012170177NZ and part numbers 441422-11 or 441422-ISS11. These components are designed to meter augmented fuel flow and control distributed functions as scheduled by the DEEC. All units must be delivered to Tinker AFB, Oklahoma, by April 10, 2028. The government intends to solicit this requirement under limited source authority per FAR 6.302, noting Honeywell International, Inc. as a qualified source, though other responsible sources may submit capability statements. The final award decision will be based on a combination of price and past performance, with price serving as a significant evaluation factor. Proposals must be submitted electronically via SAM.gov, with a response deadline of October 13, 2026. The government's obligation is contingent upon the availability of appropriated funds, and an Ombudsman has been appointed to handle contractor concerns during the proposal development phase.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

CASE, DIFFUSER, AIRCRAFT; NSN 2840-01-176-9156

Solicitation # SPRTA127R0019

Solicitation SPRTA127R0019, issued on October 13, 2026, by the Defense Logistics Agency Aviation at Oklahoma City, seeks proposals for the supply of aircraft diffuser cases, part number 6029T59G02, NSN 2840-01-176-9156. The procurement is intended as a firm-fixed-price order against Basic Ordering Agreement SPE4A1-24-G-0014. The current required quantity is 729 units, with a minimum of 182 and a maximum of 1,094 units. Proposals must provide unit pricing for two specific ranges, 182 to 638 and 639 to 1,094, or suggest alternative ranges that offer the best value. The deadline for submission is November 13, 2026, at 3:00 pm CST. Deliveries are scheduled in increments, with the first 100 units due by December 31, 2026, and the second 100 units by January 31, 2027, shipping FOB origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 Revision R, MIL-STD-2073-1 Revision E, and Special Packaging Instruction F00-702-3504. Additionally, the items require Item Unique Identification (IUID), a receiving report, and compliance with CMMC and CSO cybersecurity levels. Inspection and acceptance will occur at the point of origin.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports prime contractors on DLA Aviation F-118 engine projects for the Department of Defense. The scope of work involves performing specialized testing and inspections, including pressure testing, leak testing, and dimensional inspection. These tasks are executed using advanced equipment such as CMM, X-ray, and ultrasonic tools to ensure rigorous quality standards. To qualify for this engagement, providers must hold NADCAP and AS9100 certifications. The primary deliverables include certified test reports and Inspection Method Sheets. This opportunity is categorized under NAICS code 541380 and is managed by DLA Aviation in Oklahoma City.

Testing Laboratories and Services

POSTED

DEADLINE

Aerospace Raw Material Supply (Specialty Alloys)This subcontract, titled Aerospace Raw Material Supply (Specialty Alloys), involves the procurement and delivery of certified raw materials for prime contractors working on DLA Aviation F-118 engine projects. The scope of work includes providing aerospace-grade alloy bars, forgings, or castings, all of which must be delivered to the manufacturer with full traceability and accompanying Material Test Reports. To ensure quality and compliance, the Department of Defense requires the supplier to maintain ISO 9001 certification and provide all necessary material certifications. This opportunity is managed by DLA Aviation in Oklahoma City under NAICS code 331210, with a response deadline set for October 30, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS