Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Aluminum Alloy 7075-T6 Flat Bars

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of Aluminum Alloy 7075-T6 cold finish flat bars for prime contractors working on DLA Troop Support Construction and Equipment projects. The required materials consist of bars measuring 2.000 inches thick and 3.000 inches wide, provided in lengths of 10 to 12 feet. The contractor must ensure continuous identification marking and packaging in accordance with ASTM B660 and MIL-STD-129, and a Certificate of Quality Compliance must accompany every shipment. A total of 50 units are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. The project falls under NAICS code 331313 and is managed by the Department of Defense. Interested parties must respond by September 28, 2026.

General Info

Supply 50 Aluminum Alloy 7075-T6 flat bars to DLA by September 28, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-26-T-2261.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Aluminum Alloy 7075-T6 cold finish flat bars for prime contractors on DLA Troop Support Construction & Equipment projects. Provides bars 2.000" thick and 3.000" wide in 10-12 ft lengths. Performs continuous identification marking and packaging per ASTM B660 and MIL-STD-129. Provides Certificate of Quality Compliance with each shipment. Delivers 50 units FOB Origin to DLA Distribution DDSP New Cumberland Facility.

Similar Contracts

Same NAICS industry code

Manufacturing of Aeromed Critical Response Trauma PacksThis subcontract involves the manufacturing and supply of Aeromed Critical Response trauma packs for prime contractors supporting Medical Supply Chain FSH projects under the Department of Defense. The contractor is responsible for fabricating specialized black textile packs measuring 12 by 13 by 5 inches, utilizing industrial sewing equipment to create a design that includes four color-coded interior vinyl window pockets, three medium exterior pockets, two large exterior pockets, and one large hidden pocket. The project adheres to NAICS code 331313 and requires strict compliance with FAR 52.223-23 sustainable product standards. Performance of the contract is centered in APO 09227, with the final deliverables consisting of finished medical trauma packs designed for critical response operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

PACK, MEDICAL TRAUMA

Solicitation # SPE2DH-26-T-6822

Solicitation SPE2DH-26-T-6822 is a fixed-price request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one Critical Response Aeromed medical trauma pack. The required item is a black pack measuring 12 by 13 by 5 inches, provided without supplies, and must feature four color-coded vinyl window interior pockets, three medium exterior pockets, two large exterior pockets, one large hidden pocket, and three small vinyl window interior base pockets. The delivery is required within 84 days after receipt of order, with the destination for inspection and acceptance located in Germany and the United States. The contractor must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and follow MIL-STD-2073-1E for packaging. Compliance with the Buy American Act and the Berry Amendment is mandatory, with specific disclosure requirements for non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Quotations are due by September 22, 2026, and should be submitted to the DLA Troop Support office in Philadelphia.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

INDICATOR, DISINFECTANT

Solicitation # SPE2DH-26-T-6811

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

RESTRAINT KIT, HEAD

Solicitation # SPE2DH-26-T-6815

Solicitation SPE2DH-26-T-6815, issued by the DLA Troop Support Medical Supply Chain FSH, is a request for quotations for head restraint kits under NSN 6530016191777. The required equipment must feature a head immobilizer secured by two padded hook and loop straps and a neck support constructed from soft, closed-cell foam. The procurement consists of two line items: CLIN 0001 for 10 units and CLIN 0002 for 20 units. The items are FDA-regulated Class I devices, requiring compliance with registration, listing, labeling, and GMP requirements, and must be marked according to the latest Medical Marking Standard No. 1. Delivery is required within 10 days of award, with specific required delivery dates of September 17 and 18, 2026. Shipping is FOB Destination to the USALRCTR Bavaria in Vilseck, Germany. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Inspection and acceptance will occur at the destination. Quotations must be submitted via the DIBBS system by September 22, 2026, and must comply with the Buy American Act and other domestic material restrictions. Payment will be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

SURGICAL PACK, DISPOSAB

Solicitation # SPE2DH-26-T-6800

Solicitation SPE2DH-26-T-6800 is a request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of disposable surgical packs specifically designed for labor and delivery. Each unit of issue consists of a package of three latex-free packs, containing a comprehensive array of medical components including gowns, drapes, gauze, syringes, basins, and other essential surgical tools. The requirement is identified under NSN 6515-01-571-6887 and NAICS code 331313, with a delivery requirement of five days after receipt of order to a facility in San Antonio, Texas. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements and specifies that packaging must follow ASTM D3951 and Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Offerors must submit quotes via the DIBBS system, ensuring compliance with the Buy American Act and the Berry Amendment. Payment processing is required through the Wide Area WorkFlow system, and the government may apply HUBZone price evaluation preferences during the award process.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-6821

Solicitation SPE2DH-26-T-6821 is a request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one kit of a compact, lightweight tri-fold evacuation spineboard (NSN 6530016202510). The required equipment must have a weight capacity of 500 lbs and include the backboard, a casualty items bag, five restraint straps, and a carrying case. The delivery is required within 10 days of award, with an original required delivery date of September 17, 2026. The shipment is designated as FOB Destination, with both inspection and acceptance occurring at the destination in Vilseck, Germany. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must comply with ASTM D3951 and RP001 for palletization, ensuring each unit is in a sealed container to prevent damage. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and prohibiting certain telecommunications equipment.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

DISPOSAL CONTAINER, HYP

Solicitation # SPE2DH-26-T-6777

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Waterproof Triage Card Production and SupplyThis subcontract involves the production and supply of waterproof triage cards for prime contractors supporting DLA Troop Support medical supply contracts. The manufacturer is responsible for producing cards using waterproof substrates and water-resistant inks, featuring specific markings for contaminated or evidence status and designations for morgue, immediate, delayed, and minor categories in accordance with NSN 6530015483558. The project is managed by the Department of Defense under the Medical Supply Chain FSH, with performance taking place in San Antonio, Texas. All deliverables must comply with FAR 52.223-3 and FAR 52.223-23 regulations and be delivered to designated DLA locations. The opportunity was posted on September 13, 2026, with a response deadline of September 21, 2026, under NAICS code 331313.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supplier of Extrication Collar Bags (NSN 6530-01-584-3778)This subcontract involves the manufacture and supply of medical-grade extrication collar bags meeting NSN 6530-01-584-3778 specifications for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The selected provider is responsible for delivering one completed, labeled bag, ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The project is managed by the Department of Defense under the Medical Supply Chain FSH agency, with performance taking place at Tyndall AFB. Interested parties must respond by September 21, 2026, for this requirement categorized under NAICS code 331313.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SOAP DISPENSER ASSEMBL

Solicitation # SPE2DH-26-T-6703

Solicitation SPE2DH-26-T-6703, issued by the DLA Troop Support Medical Supply Chain FSH, seeks quotes for two soap dispenser assemblies for surgical sinks, identified by NSN 6530-01-588-5078. These kits are intended for use with the field hospital scrub sink unit 6530-01-572-6775 and must include a dispenser bottle, mounting bracket assembly, foot pedal/hose assembly, pouch, and paper towel holder. The delivery is required within 20 days after order, with the destination for inspection and acceptance located at Fort Hood, Texas. Offerors must submit their quotes by September 21, 2026, via the DIBBS system and are required to specify the source and part number being supplied. Any proposed alternate parts must be accompanied by a complete data package for evaluation, and items produced via additive manufacturing will not be considered. Packaging must adhere to ASTM D3951 and RP001 standards, while marking must comply with Medical Marking Standard No. 1 and MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

BAG, EXTRICATION COLLAR

Solicitation # SPE2DH-26-T-6733

Solicitation SPE2DH-26-T-6733 is a request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one royal blue extrication collar carry bag, identified by NSN 6530-01-584-3778. The bag must feature separate inside compartments for straps or the head. Bidders are required to specify the manufacturer and part number being supplied to allow for the evaluation of alternate offers. The item is not regulated by the FDA. The delivery is required within 20 days after receipt of the order, with a destination of Tyndall AFB, Florida. Shipping must be conducted via traceable means, and the government will handle inspection and acceptance at the destination. Packaging must adhere to ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Marking and labeling must comply with Medical Marking Standard No. 1 and MIL-STD-129. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity and safeguarding requirements under DFARS 252.204-7012. The submission deadline for quotes is September 21, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CARD, TRIAGE, DECONTAMIN

Solicitation # SPE2DH-26-T-6728

Solicitation SPE2DH-26-T-6728, issued by the DLA Troop Support Medical Supply Chain FSH, is a request for quotes for waterproof decontamination triage cards under NAICS 331313. The required items are 10.5 by 4 inches and must be marked as Contaminated or Evidence, featuring specific designations for Morgue, Immediate, Delayed, and Minor, as well as a personal property receipt/evidence tag and a hole for string attachment. The procurement is for one package containing 50 cards, with a required delivery date of September 15, 2026, and a delivery window of five days after award. The contract specifies delivery as FOB Destination to the AFMEDCOM facility in San Antonio, Texas, with inspection and acceptance also occurring at the destination. Packaging must adhere to ASTM D3951 and RP001 DLA Packaging Requirements, while marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is not regulated by the FDA. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. All quotes must be submitted via the DIBBS portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supply of JCB Refrigeration Compressors (NSN 4130016048858)This subcontract involves the supply of eight JCB INC refrigeration compressors, part number 347/21141 and national stock number 4130016048858, to support prime contractors delivering DLA supply contracts. The agreement specifies that the items must be delivered FOB Origin within 68 days. The contractor is required to adhere to strict packaging and palletization standards, specifically following ASTM D3951 and RP001 DLA Packaging Requirements for Procurement. The performance of this contract is associated with the Department of Defense and the DDSP New Cumberland Facility, falling under NAICS code 423810.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of 304 Stainless Steel Round BarsThis subcontract involves the supply of cold-drawn or rolled 304 grade stainless steel round bars for prime contractors operating at the DDSP New Cumberland Facility. The requirement specifies 0.375 inch diameter bars provided in lengths of 8 to 16 feet, totaling 241 feet of material. The contractor is responsible for delivering the physical metal bars along with a mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, for every shipment. This procurement is managed under NAICS code 423440 for the Department of Defense, with performance taking place in New Cumberland.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Carbon Steel Rolled Round Bar SupplyThis subcontract involves the supply of carbon steel rolled round bars for prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The required materials must be 1.525 inches in diameter and 10 to 12 feet in length, adhering to MIL-S-22698C(2) specifications. All products must feature waterproof markings in accordance with MIL-STD-129R(3) and ASTM A700-14, and deliveries must include both the physical bars and Certificates of Quality Compliance. To be eligible, providers must maintain an ABS Surveyor's endorsement, CMMC Level 2 certification, and a QSLM/QSDL listing. The contract is associated with the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Responses to this opportunity are due by September 28, 2026.

Rolling Mill Machinery and Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

ASTM A700 Preservation and Packaging ServicesThis subcontract for the Department of Defense at the DDSP New Cumberland Facility involves providing specialized preservation, packing, and marking services for metal bars intended for DLA supply contracts. The contractor is responsible for applying preservation codes Z and ZZ according to ASTM A700 standards and ensuring all shipments are marked in compliance with MIL-STD-129. Using industrial packing materials and corrosion inhibitors, the service provider must ensure all packaging meets specific DLA depot requirements to deliver products ready for shipment. The opportunity was posted on September 15, 2026, with a response deadline of September 28, 2026. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 339999. This contract is designed to support prime contractors by ensuring that metal bars are properly preserved and marked for military logistics and supply chain integration.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Metal Bar Production and SupplyThis subcontract for Metal Bar Production and Supply involves the manufacture and delivery of metal bars for prime contractors supporting the DDSP New Cumberland Facility under the Department of Defense. The contractor is responsible for producing bars to specific dimensions and material grades using industrial rolling and cutting equipment, with all finished products delivered directly to the DLA depot in New Cumberland. A critical requirement of this contract is the provision of a mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, for every shipment to verify adherence to DLA material standards. The opportunity is categorized under NAICS code 332111, with a response deadline of September 28, 2026.

Iron and Steel Forging

POSTED

about 21 hours ago

DEADLINE

Supply of Extruded Aluminum Alloy 5086-H111 Round BarsThis subcontract involves the supply of 1,782 linear feet of extruded Aluminum Alloy 5086-H111 round bars for prime contractors supporting DLA supply contracts. The required bars must have a 0.500 inch diameter and lengths ranging from 8 to 12 feet, with all deliverables adhering to RP001 packaging and RA001 quality standards. Essential documentation includes Metal Certification CDRLs and DD Form 1423s. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331221. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit responses by the deadline of September 28, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 21 hours ago

DEADLINE

Copper Alloy 934 Round Bar SupplyThis subcontract involves the supply of three specialized Copper Alloy 934 round bars for prime contractors supporting DLA Troop Support metals contracts. The bars must be manufactured or sourced using centrifugal or continuous casting methods to precise dimensions of 5.000 inches in diameter and 13 inches in length. A mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, is required for the delivery. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026. The work falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Flashlight Hardware SupplierThis subcontract, titled Flashlight Hardware Supplier, requires the delivery of 1,000 flashlights matching NSN 6230016993102 for prime contractors at the DDSP New Cumberland Facility. The hardware must be packaged according to MIL-STD-2073-1E and RP001 and marked in accordance with MIL-STD-129. Delivery is specified as FOB Origin with a total timeline of 329 days. The opportunity is a Total Small Business Set-Aside under NAICS code 335139 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services, issued by the Department of Defense DDSP New Cumberland Facility, involves providing specialized preservation and packaging for prime contractors on DLA supply contracts. The scope of work requires the application of Preservation Method 10 using specific preservative and cushioning materials within Unit Container D3, with all marking executed according to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The service provider must utilize MIL-SPEC containers and industrial preservatives to deliver unit containers that are fully preserved, marked, and ready for shipment. This opportunity is categorized under NAICS code 488510, with a response deadline of September 28, 2026, and performance taking place in New Cumberland, Pennsylvania.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Manufacture of Compress Crankshaft (NSN 014592232)This subcontract involves the precision manufacture of a compressor crankshaft, identified by NSN 014592232, for prime contractors serving DLA supply contracts. The production process requires the use of CNC and grinding precision machining equipment to ensure the final product meets the DLA Master List of Technical and Quality Requirements. The contractor must adhere to strict regulatory standards, including DFARS 252.223-7008 regarding the prohibition of hexavalent chromium and DFARS 252.225-7048 concerning export controls. This project is managed under the Department of Defense through the DDSP New Cumberland Facility, with a response deadline of September 28, 2026.

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military packaging, marking, and palletization for prime contractors on DLA supply contracts. The service provider is responsible for delivering 33 units packaged and marked for shipment to the DDSP New Cumberland facility. All work must strictly adhere to MIL-STD-129 for markings, MIL-STD-2073-1E for packaging, and RP001 for palletization, with hazardous labels applied according to 29 CFR 1910.1200 when necessary. The contract is managed under NAICS code 488510 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of September 28, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of NSN 4820-01-416-8522 ComponentsThis subcontract with the Department of Defense involves the supply of 33 units of NSN 4820-01-416-8522 for prime contractors on DLA supply contracts. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications associated with the National Stock Number. To ensure quality and consistency, First Article Units must be maintained at the production facility as a manufacturing standard until all quantities are officially accepted. The contract is associated with NAICS code 325211 and is managed by the DDSP New Cumberland Facility. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Plastics Material and Resin Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS