Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Anti-Lock Brake System (ABS) Control Units

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement and delivery of 15 Anti-Lock Brake System (ABS) control units specifically for military use, with strict compliance to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling and traceability standards. All units must be packaged, marked, and documented to ensure full logistical compatibility with Department of Defense supply chains, including unique item identification and serialized tracking. The work falls under NAICS code 336370, classifying it within the automotive part manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense. Delivery and performance are expected to meet military-grade requirements for durability, security, and documentation integrity, though no specific delivery location or point of contact is provided in the data. The solicitation was posted on August 5, 2026, and the award is accessible via the DIBBS system under contract number SPE7M426P3711.

General Info

Procure 15 military-grade ABS units with MIL-STD packaging, labeling, and serialized tracking for DoD supply chain.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336370 - Motor Vehicle Metal StampingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-026E.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTROL, ANTI-LOCK B

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 15 ABS control units with military-compliant packaging, labeling, and traceability. Includes adherence to MIL-STD-2073-1E and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Windshield Wiper Control Box Supply

FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Climate Control System (Heating and Fan System)

247-NETWORK Contract Office 7 (36C247)

POSTED

about 17 hours ago

DEADLINE

Precision Drive Shaft Manufacturing

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacture of Accessories Stowage Boxes

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Pneumatic Tire Supply for Military VehicleThe contract entails the supply and delivery of two pneumatic tires with part number 3Q1137D-1 and National Stock Number 2610001425160, specifically designed for military vehicle applications and compliant with commercial specifications. These tires are intended for use at Barksdale Air Force Base and must meet the rigorous performance and durability standards required for defense operations. The contract is classified as a subcontract under the NAICS code 336370, which corresponds to automobile tire manufacturing, indicating the involvement of a specialized supplier within the defense supply chain. Issued by the Defense Logistics Agency under the Department of Defense, the contract was posted on August 9, 2026, and is linked to the award reference SPE7LX26F91Z3 with contract number SPE7LX19D0029. There is no set-aside designation specified, meaning the solicitation is open to all eligible contractors without restrictions based on business size or type. Delivery is expected to support operational readiness at the specified location, though no detailed delivery timeline or point of contact information is provided in the data. The contract does not include information on pricing, payment terms, or performance milestones, but its existence confirms an active procurement need for critical vehicle components within the military logistics system.

Defense Logistics Agency

POSTED

DEADLINE

BOX, ACCESSORIES STOWAG

Solicitation # SPE7L4-26-T-6222

The contract solicits 69 wooden box assemblies for accessories stowage, identified by NSN 2540-01-128-5708, under a small business set-aside with NAICS code 336370. The item must be manufactured in strict compliance with multiple reference drawings, including NR 21450 BPAX2 Rev. 4, NR 19207 12369017 Rev. B, and NR 19207 12304873, along with ASTM A633/A633M material standards. All packaging and marking are governed by MIL-STD-2073-1E and MIL-STD-129, with special packaging instruction SPI# AK11285708 Rev. A requiring precise preservation techniques, and palletization adhering to DLA’s RP001 requirements. The product is subject to tailored higher-level quality requirements, necessitating a zero-defect sampling plan per MIL-STD-1916 or ASQ H1331 Table 1 with critical, major, and minor attribute verification levels of VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Quality systems must comply with SAE AS9003 or ISO 9001 tailored to AS9003, and inspection and acceptance occur at origin, governed by FAR 52.246-2. Technical data associated with this item is export-controlled under ITAR or EAR, requiring adherence to DFARS 252.225-7048; access is restricted to contractors with approved JCP certification, completed DLA export control training, and explicit authorization. The contractor must comply with cybersecurity safeguards under DFARS 252.204-7012, NIST SP 800-171 DOD assessment requirements with deviation 2026-O0025, and prohibitions on hexavalent chromium, hazardous materials storage, and covered defense telecommunications equipment. Delivery is mandated 165 days after award with FOB Origin terms to the DLA Red River Receiving Facility in Texarkana, TX, with payment processed electronically via WAWF requiring both invoice and receiving report submissions. All submissions must be made through D

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

BOX, ACCESSORIES STOWAG

Solicitation # SPE7L4-26-T-6220

The contract solicitation SPE7L4-26-T-6220 issued by the Defense Logistics Agency (DLA) for BOX, ACCESSORIES STOWAGE is a service-disabled veteran-owned small business set-aside under NAICS code 336370, requiring full and open competition among eligible small businesses. The item is governed by a Technical Data Package (TDP) Revision B Gen 2, referencing multiple engineering drawings with revision dates ranging from 1962 to 2020, including a critical update issued in February 2020 for part number 19207 12314461-1. All components must comply with applicable Qualified Products Lists or Qualified Manufacturers Lists as defined in Procurement Note H02, and manufacturing must adhere to SAE AS9003 or ISO 9001 tailored to AS9003 standards. Quality requirements mandate the use of MIL-STD-1916 or ASQ H1331, Table 1 for sampling, with zero non-conformances required in any sample lot unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. A Certificate of Conformance is mandatory, and no ozone-depleting chemicals may be used, overriding any conflicting specification but not reducing product performance standards. Specialty metal requirements trigger compliance with DFARS 252.225-7008, 7009, and 7010 if the award exceeds the Simplified Acquisition Threshold, and domestic sourcing under the Buy American Act and Berry Amendment apply, with the Berry threshold set at $150,000. Packaging must conform to MIL-STD-2073-1E with specific codes for preservative method, wrapping, cushioning, and container types; marking must follow MIL-STD-129 with no special markings required. Palletization and hazardous material handling follow DLA-specific procedures and IP025, including compliance with OSHA’s Hazard Communication Standard. Delivery is FOB origin with an 81-day lead time after order receipt, targeting delivery dates of February 1, 2027, with need-to-ship dates of July 23, 2026, and May 5, 202

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Windshield Wiper Arm Supply

Defense Logistics Agency

POSTED

DEADLINE

Pneumatic Vehicular Tire SupplyThe contract entails the supply of a single pneumatic vehicular tire identified by NSN 2610000509560, which must comply with established commercial specifications and federal packaging standards. This is a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 336370, indicating its alignment with motor vehicle tire manufacturing. The contract was posted on August 5, 2026, and its place of performance and point of contact details are not specified, suggesting administrative or logistical flexibility in delivery. The award reference links to the DIBBS system for official documentation, confirming its operational status within the DoD procurement framework.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Steering Tie Rod (NSN 2530015235048, MFR P/N: 2099886)The contract involves the procurement and delivery of two units of a specified steering tie rod, identified by NSN 2530015235048 and manufacturer part number 2099886, for use in military vehicle maintenance operations under a Defense Logistics Agency delivery order. This subcontract falls under the NAICS code 336370, indicating classification within the automotive component manufacturing sector, and is intended to support critical maintenance needs within the Department of Defense. The contract was posted on August 5, 2026, and is linked to delivery order SPE7LX26FB2J4 under the master contract SPE7LX21D0087, with an explicit requirement for two units to be furnished. No specific place of performance or point of contact is detailed, and no set-aside provisions are specified, meaning the contract is open to any eligible bidder regardless of business size or demographic classification.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fluid Pre-Filter Parts KitsThe contract involves the manufacturing and delivery of standardized fluid pre-filter parts kits designated by NSN 4330011216350, intended for use in military fluid handling systems. These kits must be produced to exacting specifications and packaged in accordance with MIL-STD-129 requirements, ensuring consistent labeling, barcoding, and containerization for seamless integration into defense logistics networks. The work falls under NAICS code 336370, indicating focus on transportation equipment manufacturing, and is structured as a subcontract under the Defense Logistics Agency, a subdivision of the Department of Defense. All deliveries are expected to meet strict quality and documentation standards for military supply chains, with no indication of set-aside provisions or specific geographic performance locations. The contract was posted on August 5, 2026, and is accessible through the DIBBS system under the referenced award and delivery identifiers. The scope emphasizes reliable, repeatable production and packaging to support ongoing operational readiness and inventory management across military installations without requiring site-specific customization.

Defense Logistics Agency

POSTED

DEADLINE

Windshield Wiper Arm Manufacturing and SupplyThe contract entails the manufacture and supply of five units of windshield wiper arms with part number 125ANC0, all of which must meet stringent military specifications, including adherence to DFARS regulations and MIL-STD-129 marking standards to ensure compatibility and traceability within defense logistics systems. The work falls under NAICS code 336370, indicating classification within the automotive parts manufacturing sector, and is structured as a subcontract under the Department of Defense’s Fluid Handling Division, with performance expected to comply fully with federal procurement requirements for defense-related components. The solicitation was posted on August 4, 2026, with a firm response deadline of August 17, 2026, giving potential suppliers a two-week window to submit proposals. Although no specific place of performance or point of contact is listed, the context implies that delivery and compliance verification will be managed by the Department of Defense’s logistics infrastructure. The contract does not specify a set-aside status, meaning it is open to all qualified vendors regardless of small business or socioeconomic designations. All delivered units must be fully compliant with military standards to pass inspection and acceptance, with non-compliance likely resulting in rejection or contractual penalties.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Small Business Representation and Compliance Support

Administrative Management and General Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information

Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

Military-Grade Packaging and Preservation Services

Other Warehousing and Storage

POSTED

about 12 hours ago

DEADLINE

Radioactive or Hazardous Materials Compliance Services

Testing Laboratories and Services

POSTED

about 12 hours ago

DEADLINE

Industrial Frame Supply (Component Manufacturing)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Transportation and Delivery to Camp Lejeune

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

Military-Compliant Packaging and Marking Services

Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling Services

Other Scientific and Technical Consulting Services

POSTED

about 12 hours ago

DEADLINE

Ball Valve Supply (NSN 4820015253890)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Military-Compliant Logistics and Delivery Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling Services

Remediation Services

POSTED

about 12 hours ago

DEADLINE

Non-Rechargeable Battery Supply (NSN 6135016068179)

Storage Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE