This Government Contract opportunity from Department Of Defense was posted on September 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Camera Set Up Box (NSN 6720015267228)

Closed

Federal

Submission Closed09/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510

New

DIBBS

Electrocardiograph 12-Lead One Step ECG Cable SupplyThis subcontract involves the supply of specialized medical lead wire sets for prime contractors under Department of Defense DLA Troop Support medical supply contracts. The scope of work requires the manufacture of AAMI compliant cables, specifically consisting of a 4-lead trunk cable and a removable precordial 6-lead set. The contractor must deliver six units of Lead Wire Sets under NSN 6515-01-621-1689 and 6515-01-614-0182, ensuring all products adhere to Medical Marking Standard No. 1 and are packaged according to ASTM D3951 and MIL-STD-129. The project falls under NAICS code 334510 and is managed by the Medical Supply Chain MD Surg FSF. Performance of the contract will take place at March ARB, zip code 92518-1831. The solicitation was posted on November 3, 2026, with a response deadline of November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

6515--BRAND NAME ONLY- Philips ST80i Stress Test System

Solicitation # 36C24427Q0052

The Department of Veterans Affairs, Network Contracting Office 4, is conducting a market survey to identify qualified sources capable of providing a brand name Philips ST80i Stress Test System for the Wilmington VA Medical Center in Delaware. This sources sought notice is for informational planning purposes and is not a formal solicitation. Interested vendors must be registered in the System for Award Management and, if applicable, maintain current VetCert certification for SDVOSB or VOSB status. The effort falls under NAICS code 334510, with a small business size standard of 1,250 employees. The scope of work requires the delivery of the system by December 1, 2026, or sooner, with shipping occurring within 30 days of order receipt. A critical requirement is the provision of white glove service via Midmark Delivery Service, which includes delivery, unboxing, setup of chairs in the exam room, and removal of all trash. The contractor must also be able to hold the equipment in the event of construction delays. Responses must include a detailed capability statement, company information, and a history of relevant government contracts from the last three years, submitted electronically to the contract specialist by 5:00 PM on November 11, 2026.

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

Presolicitation Notice PowerScribe Maintenance

Solicitation # PowerScribe360_Maintenance_FB_2026

POSTED

DEADLINE

ANALYZER, BLOOD CHOLEST

Solicitation # SPE2DH-27-T-0381

This solicitation from the DLA Troop Support Medical Supply Chain FSH is for the procurement of blood cholesterol analyzers, specifically the Accutrend Plus Meter, under NSN 6630-01-689-9343. The requirement consists of two kits, each containing the meter, a manual, a reference card, a troubleshooting guide, four AAA batteries, and a case. The device is designed for total cholesterol measurement and is capable of operating both indoors and outdoors within a temperature range of 64 to 95 degrees Fahrenheit. Delivery is required within 20 days after order, with destination points specified at Fort Stewart, Georgia, and Shreveport, Louisiana. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires commercial packaging in sealed unit containers to prevent damage. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards, and prohibitions on covered defense telecommunications equipment. Evaluation may include a HUBZone price preference, and the government has indicated that this buy may be a candidate for automated award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Evolution/RSS/Floor Safety Bed SupplierThis subcontract involves the supply of seven Evolution/RSS/Floor Safety Beds for prime contractors working on Department of Veterans Affairs projects at Audie Murphy Memorial Hospital in San Antonio, Texas. The required beds must be manufactured in the USA and feature a safe working load of 850 lbs, electric articulation for the head, knee, foot, and Trendelenburg positions, and an integrated emergency battery backup. To ensure safety and quality, all equipment must be FDA cleared and maintain strict compliance with IEC 60601-1 and CSA C22.2 No. 601.1 standards. The procurement is managed under the Department of Veterans Affairs Network Contract Office 17 and falls under NAICS code 334510.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Countermeasure Control Systems Manufacturing & SupplyThis subcontract, titled Countermeasure Control Systems Manufacturing and Supply, involves the production and delivery of flight-certified Countermeasure Control units for prime contractors supporting US Air Force B-1 Lancer bomber projects. The scope of work includes the integration of control logic hardware, interface manufacturing, and comprehensive system-level testing utilizing specialized control hardware and avionics integration benches. Managed under the Department of Defense through the Ga DLA Aviation At Warner Robins, the contract requires strict adherence to DFARS 252.204-7012 and 252.239-7010 regulations. Due to the nature of the work, the selected provider must possess the capability to process classified data. The opportunity was posted on November 2, 2026, with a response deadline of December 3, 2026, falling under NAICS code 334510.

Ga DLA Aviation At Warner Robins

POSTED

DEADLINE

IF Controller Manufacturing & SupplyThis subcontract involves the manufacture and supply of flight-certified Intermediate Frequency Controllers for prime contractors supporting US Air Force B-1 Lancer bomber projects. The scope of work includes PCB assembly, electronic component integration, and signal processing hardware manufacturing utilizing precision electronics assembly tools and IF signal generators. The contractor must be capable of processing classified data and maintaining strict compliance with DFARS 252.204-7012 and 252.239-7010 regulations. Managed under NAICS code 334510 for the Department of Defense via the Ga DLA Aviation At Warner Robins, the response deadline for this opportunity is December 3, 2026.

Ga DLA Aviation At Warner Robins

POSTED

DEADLINE

EVOLUTION HOSPITAL BEDS

Solicitation # 36C25727Q0079

The Department of Veterans Affairs, through Network Contracting Office 17, is conducting market research via a Sources Sought Notice for the procurement and delivery of hospital beds and safety accessories for the Audie Murphy Memorial Hospital in San Antonio, Texas. This requirement is issued on a brand name or equal basis under FAR 11.104 and FAR clause 52.211-6. The specific procurement includes seven Evolution/RSS/Floor Safety Beds with a minimum safe working load of 850 lbs and emergency battery backup, along with seven right-hand and left-hand foot end side rails and seven patient assist mounts. All products must be manufactured in the USA and be FDA-cleared or listed. Technical compliance requires adherence to IEC 60601-1, IEC 60601-1-2, and IEC 60601-2-38 standards, including specific bed rail entrapment dimensional criteria and a minimum IPX4 ingress protection rating. As this is a market research effort and not a formal solicitation, the government is seeking capabilities statements from interested businesses, including their SAM registration status, NAICS code 334510, business size, and socioeconomic category to determine potential set-asides. Responses must be submitted to Rafael Rodriguez by November 6, 2026.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

مشروع توريد وتركيب جهاز روبوت جراحي أثناء العمليات لجراحة الوجه والفكين 78-2026

Solicitation # Doc268737954

King Saud University is seeking sources for the supply and installation of an advanced intraoperative surgical robotic system specifically designed for complex maxillofacial surgeries. This high-precision system must integrate cutting-edge technologies, including CMF navigation software, planning programs, and mixed reality capabilities. The system is intended to enable precise robotic execution based on virtual planning, utilizing real-time navigational guidance and CBCT confirmation to achieve an accuracy level of less than 0.5 mm, significantly surpassing traditional surgical methods. The solicitation, identified by number Doc268737954, was posted on November 2, 2026, with a response deadline set for November 17, 2026. This project will be performed in Saudi Arabia. Interested parties can coordinate through the primary point of contact at King Saud University via email or the provided telephone and WhatsApp contact details.

KSU King Saud University

POSTED

DEADLINE

VENTILATOR, VOLUME, PORT

Solicitation # SPE2DS-27-Q-0026

Solicitation SPE2DS-27-Q-0026 is a fixed-price request for quotations issued by DLA Troop Support Medical Supply Chain for the procurement of two portable EMV Plus volume ventilators (NSN 6515-01-586-5898). These units must include an internal battery charger, a 3-liter oxygen reservoir kit, and a military manual. Technical specifications include a weight of approximately 9.5 lbs, an operating voltage range of 100 to 240 VAC and 11 to 33 VDC, and an operating temperature range from -13 to +167 degrees Fahrenheit. This is a Foreign Military Sales requirement for Taiwan, with delivery required within 30 days after receipt of the order and a customer required delivery date of September 29, 2026. The contract mandates strict adherence to medical packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Items must be provided in sealed unit containers and commercial exterior shipping containers per MIL-STD-2073-1E. Item Unique Identification (IUID) is required in accordance with MIL-STD-130 and DFARS 252.211-7003. Inspection and acceptance are set at origin, and all invoicing must be processed electronically via Wide Area Workflow as a receiving report and invoice combo, including a Certificate of Conformance. This procurement is not a small business set-aside and incorporates various FAR and DFARS clauses regarding the Buy American Program, cybersecurity reporting, and sustainable products. Quotations are due by November 6, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Fulldome Video SystemThis subcontract, managed by DAS Procurement for the state of Connecticut, involves the supply and installation of a comprehensive fulldome video system for prime contractors working on projects at Central Connecticut State University. The scope of work focuses on the delivery of a fully functional projection system, specifically requiring the installation of high-resolution video projectors and specialized edge-blending software to support cinematic full-dome content. The project falls under NAICS code 334510 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 15, 2026, at 3:00 PM. Further details and submission guidelines can be accessed through the CTSource Bid Board portal.

POSTED

DEADLINE

Planetarium Projection System Supply & IntegrationThis subcontract, managed by DAS Procurement for the state of Connecticut, involves the supply and integration of a star projection system for the Central Connecticut State University planetarium. The selected provider will be responsible for the complete delivery, rigging, mounting, alignment, and calibration of the system within a 38-foot level dome. The project requires rigorous acceptance testing to ensure the system meets strict astronomical accuracy standards for university instruction and is built to maintain a 20-year service life. The procurement process is categorized under NAICS code 334510, with the solicitation posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 15, 2026, at 3:00 PM. The ultimate goal of the contract is the delivery of a fully commissioned and calibrated projection system that supports the academic mission of the university.

DAS Procurement

POSTED

5 days ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract involves the manufacture or sourcing of a specialized Camera Set Up Box, identified by NSN 6720015267228, for prime contractors supporting Department of Defense supply contracts. The provider must ensure the hardware complies with the DLA Master List of Technical and Quality Requirements and provide all necessary Safety Data Sheets for any hazardous materials used. The agreement requires the delivery of one completed unit to a government designated location in FPO, zip code 09564. This opportunity falls under NAICS code 334510 and was posted on September 13, 2026, with a response deadline of September 24, 2026.

General Info

Subcontract for one Camera Set Up Box (NSN 6720015267228) for Department of Defense.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

FPO, AE, 09564, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8EN-26-T-3148.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOX, CAMERA SET UP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 13

subcontract

Response DeadlineSep 24

Deadline has passed

Submission Closed

09/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies a specialized Camera Set Up Box for prime contractors delivering DLA supply contracts. Manufactures or sources the hardware item identified by NSN 6720015267228 in compliance with the DLA Master List of Technical and Quality Requirements. Provides Safety Data Sheets for hazardous materials if applicable. Delivers one completed Camera Set Up Box unit to the government designated location.