Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Centrifugal Pump Units for U.S. Air Force Spares Procurement

Active

Federal

Response Deadline08/14/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force is seeking to procure 19 units of a specific centrifugal pump identified by part number 8602M1 and NSN 4320-01-374-0685FW for potential future spares requirements. This procurement is structured as a subcontract and requires all vendors to undergo and successfully complete the Source Approval Request process to qualify as approved suppliers. The solicitation was posted on August 6, 2026, with a deadline for responses set for August 14, 2026, at 4:59 a.m. Eastern Time. The acquisition falls under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The contracting activity is managed by the Defense Logistics Agency Aviation at Oklahoma City under the Department of Defense. While the place of performance and point of contact details are not specified, the procurement is intended to support long-term logistical needs of the Air Force, with the units designated for future spares rather than immediate deployment.

General Info

U.S. Air Force seeks 19 centrifugal pumps for future spares via subcontract, requiring source approval by August 14, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 04:59:00 AM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 19 units of a centrifugal pump (P/N: 8602M1, NSN: 4320-01-374-0685FW) for potential future procurement by the U.S. Air Force. Vendors must qualify via a Source Approval Request (SAR) process.

Similar Contracts

Same NAICS industry code

New Manufacture of Control Gyroscope (P/N 478710-04-02, NSN 6615-01-244-4251)The contract entails the full-scale manufacturing of 39 precision control gyroscopes designated as part number 478710-04-02 with NSN 6615-01-244-4251, specifically for use in aerospace systems. The scope encompasses all phases of production including engineering design, fabrication, rigorous quality assurance testing, and final delivery of flight-certified components that meet stringent military and aerospace specifications. The work must be executed to ensure full compliance with reliability and performance standards required for critical flight applications, with every unit warrantied and documented for traceability and certification. This is a subcontract opportunity issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with the North American Industry Classification System code 336412 indicating classification under Aircraft and Parts Manufacturing. The solicitation was posted on August 6, 2026, and all responses must be submitted no later than August 14, 2026, at 4:59 a.m. Eastern Time. The place of performance is not specified, but the components are intended for integration into defense aerospace platforms, requiring strict adherence to federal defense procurement protocols and secure handling procedures throughout the supply chain.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Gearbox Assembly Manufacturing and SupplyThe contract calls for the manufacture and supply of 30 units of a gearbox assembly identified by Part Number C7088-1A and NSN 1680-00-789-9345HS, specifically for use in defense aerospace systems. The work encompasses full production, rigorous quality assurance processes, and timely delivery to Tinker Air Force Base in Oklahoma City. All units must meet stringent defense specifications to ensure operational reliability and safety in mission-critical applications. Quality control protocols are integral to the scope, with inspections and documentation required at every stage of fabrication to verify compliance with technical and performance standards. The contract is classified as a subcontract under NAICS code 336412, which pertains to aerospace product and parts manufacturing, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 6, 2026, with a response deadline of August 14, 2026, at 4:59 AM UTC. Interested parties must submit proposals within this window, and performance is expected to be executed in alignment with defense logistics and delivery timelines. There is no set-aside designation specified, meaning the opportunity is open to eligible small businesses and large contractors alike, provided they can meet the technical, quality, and delivery requirements for this critical defense component.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Precision Agricultural Drone System IntegrationThe contract entails the full integration and delivery of a turnkey agricultural drone system designed for precision farming, featuring dual payload capability to support simultaneous deployment of multiple sensors or dispensers, real-time telemetry for live data transmission during flight, and advanced obstacle avoidance technology to ensure safe navigation over complex terrain. The system includes comprehensive ground control software that enables intuitive mission planning, real-time monitoring, and data analytics tailored for agricultural applications, ensuring seamless operation for users in field-based environments. All components must be fully functional, ruggedized for outdoor use, and compatible with existing farm management workflows. This procurement is a small business set-aside subcontract under NAICS code 336412, restricted to eligible small businesses, and is issued by the USDA Agricultural Research Service’s Agricultural Management and Precision Delivery unit. The place of performance is designated as Temple, Texas, with a response deadline of August 21, 2026. The system must meet rigorous performance standards to support reliable, high-accuracy data collection and targeted application in crop monitoring, soil analysis, and pest or nutrient management. All deliverables are expected to be fully integrated, tested, and ready for immediate field deployment without requiring additional customization or third-party integration.

USDA Ars Afm Apd

POSTED

DEADLINE

BEARING,SLEEVE,LINE

Solicitation # SPE4A626Q1284

Solicitation SPE4A626Q1284 is a sources-sought notice issued by DLA Aviation under the Department of Defense to identify qualified suppliers for a sleeve bearing, NSN 3110-01-341-6408, with approved source KATO ENGINEERING INC. (CAGE 32770). The notice invites surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory to respond, requiring submission of a completed Surplus Certificate DLAD 52.211-9000 or adequate traceability documentation to verify product acceptability, along with available quantities and pricing. The acquisition will follow FAR 12 procedures for commercial items and FAR 13.5 for other than full and open competition, with no set-aside designated. Responses are due by August 12, 2026, and must be emailed to Matthew Diefes at matthew.diefes@dla.mil. The requested delivery is 11 units with a 255-day delivery window ARO, FOB Origin, with inspection and acceptance occurring at destination, and the item is subject to export control of technical data. The place of performance is Richmond, Virginia, and the contracting office is located at 23237. While the notice identifies the approved manufacturer and specifies the commercial nature of the item, it includes no pricing data, contract value, evaluation factors, or formal contract clauses, as it is preparatory in nature and not a binding solicitation. No packaging, marking, barcoding, or MIL-STD requirements are specified, and no representations, certifications, or socioeconomic claims from offerors are solicited or required beyond traceability and surplus documentation. The solicitation will proceed under terms consistent with standard DLA Aviation procurement practices, with award potentially based on price, past performance, and other factors outlined in the final solicitation document available via DIBBS.

POSTED

DEADLINE

29--PLUNGER,ACTUATOR,SWITC

Solicitation # SPE7M426T305A

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 31 units of NSN 2995001059401, PLUNGER, ACTUATOR, SWITCH, to be delivered to DLA Distribution Cherry Point within 168 days of award. The procurement is issued as a Request for Quote under solicitation number SPE7M426T305A, with responses due by August 17, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. The approved source for this item is manufacturer 62983 with part number 333664. The North American Industry Classification System code is 336412, indicating the product falls under the Automotive Parts and Accessories Manufacturing category. All responsible suppliers may submit quotes, provided they are submitted electronically prior to the deadline. The solicitation includes no specifications, plans, or drawings, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the SAM.gov link provided. The contracting office is located in Columbus, Ohio, and the procurement is not set aside for any specific small business category.

DLA Land And Maritime

POSTED

DEADLINE

29--SPOOL AND SLEEVE

Solicitation # SPE7M426T324K

The contract solicitation under number SPE7M426T324K seeks quotations for 24 units of NSN 2995009157849, a SPOOL AND SLEEVE, to be delivered to DLA DISTRIBUTION CHERRY POINT within 447 days of award. The only approved source for this item is 603432 under manufacturer code 62983. This is a combined solicitation requiring electronic submission of quotes only, with no hard copies available, and no technical specifications, plans, or drawings are provided. All responsible suppliers are invited to respond, provided their quotes are received by the deadline of August 17, 2026. The solicitation was posted on August 6, 2026, and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and further details can be accessed through the SAM.gov link or the DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

DEADLINE

29--DETECTOR,METALLIC P

Solicitation # SPE7M426T311W

The contract seeks the procurement of 10 units of NSN 2995013545754, DETECTOR,METALLIC P, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 168 days after award. The only approved source for this item is vendor 97484 with code 4J2743. The solicitation is issued as an RFQ under number SPE7M421W and is accessible exclusively online via the SAM.gov workspace link; no hard copies are available, nor are any specifications, plans, or drawings provided. All responsible sources may submit quotes electronically, provided they are received by the deadline of August 17, 2026. The NAICS code is 336412, and the contracting activity falls under the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions regarding the solicitation must be directed to the designated point of contact via email, and further details can be obtained by searching the solicitation number on the DIBBS website.

DLA Land And Maritime

POSTED

DEADLINE

49--BODY,NOZZLE,FUEL AND O

Solicitation # SPE7M426T311U

The contract solicitation seeks 43 units of NSN 4930012448043 BODY, NOZZLE, FUEL AND O, to be delivered to DLA DIST SAN JOAQUIN under the address code W1A8, with a delivery deadline of 168 days after award. The solicitation, numbered SPE7M426T311U, is issued as an RFQ and must be submitted electronically; no hard copies are available. Only approved sources—0DT23 47375 and 0DT23 61429AHL ITEM 9—are eligible to respond, though all responsible sources may submit quotes if received on time. No technical specifications, plans, or drawings are provided with this solicitation. The opportunity is listed under NAICS code 336412 and is managed by the DLA Land and Maritime office under the Department of Defense, with the primary point of contact for inquiries accessible via email at DibbsBSM@dla.mil. The solicitation was posted on August 6, 2026, and quotes must be submitted by August 17, 2026, through the SAM.gov portal using the provided UI link.

DLA Land And Maritime

POSTED

DEADLINE

29--CONTROL ASSEMBLY,PUSH-

Solicitation # SPE4A726T628Y

The contract seeks the procurement of seven units of the CONTROL ASSEMBLY, PUSH-, identified by NSN 2995011258911, to be delivered to DLA Distribution Jacksonville within 424 days after award. Only approved sources identified by the codes 0PXV4, 3CW15, 76301, and 78710, each associated with part number 7-43429-16, are eligible to respond. The solicitation is issued as an RFQ and must be accessed electronically via the provided SAM.gov link; no hard copies are available, and no specifications, plans, or drawings are provided to potential offerors. All responsible sources may submit quotes, provided they are received electronically and prior to the deadline. The solicitation number is SPE4A726T628Y, posted on August 6, 2026, with responses due by August 14, 2026. The action falls under NAICS code 336412 and is managed by the DLA Aviation office in Richmond, Virginia, under the Department of Defense. Any inquiries must be directed via email to the designated point of contact, with instructions provided to locate the full solicitation document through the DIBBS website if needed.

POSTED

DEADLINE

29--HOUSING,ENGINE DRIVE,E

Solicitation # SPE7M426T320U

The contract solicitation seeks six units of NSN 2925013572512, HOUSING, ENGINE DRIVE, E, to be delivered to DLA Distribution Cherry Point within 168 days after award. The approved source for this item is DS-938071 under vendor code 62983. This procurement is conducted via a Request for Quotation, accessible exclusively through an online link, with no hard copies available. No specifications, plans, or drawings are provided to offerers. All responsible suppliers may submit electronic quotes before the deadline, and timely submissions will be considered for award. The solicitation number is SPE7M426T320U, posted on August 6, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. For inquiries, contact the designated buyer via email, as detailed in the solicitation’s Additional Information section, or search using the solicitation number on the DIBBS portal.

DLA Land And Maritime

POSTED

DEADLINE

SPEED MAC - STRATEGIC PROCUREMENT FOR ENGINE EXCELLENCE AND DELIVERY SPEED MULTIPLE AWARD IDIQ.

Solicitation # FA812126RB002

The U.S. Air Force is soliciting proposals under RFP FA812126RB002 for a Strategic Procurement initiative focused on Engine Excellence and Delivery Speed, aiming to establish Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contracts to support the repair, overhaul, remanufacture, and new manufacture of parts for the F100-PW-220/229 Pratt and Whitney engine. This effort serves both the U.S. Air Force and Foreign Military Sales, with contracted capabilities supplementing the Oklahoma City Air Logistics Complex’s operations at Tinker Air Force Base. Proposals must be submitted via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module by 17 August 2026 at 12:00 PM Central Time, with no extensions granted despite prior erroneous dates. A virtual proposal conference is scheduled for 23 July 2026, providing participants an opportunity to engage with the contracting team. The contracts will be awarded under the Revolutionary FAR Overhaul (RFO) Part 15, accommodating both Firm-Fixed-Price and Cost-Reimbursable line items, with no restrictions on foreign participation. The ordering period spans ten years, consisting of a base five-year period and one five-year option, with individual task and delivery orders issued under RFO 16.506 and 16.507. Funding will be obligated per order, and all awardees must meet a minimum order guarantee established after the award conference. While initially scoped for the F100 engine, the contract structure allows for future expansion to other platforms such as the TF33. Commercial and non-commercial, supply and service, and sole source or competitive terms will apply as appropriate, and all documentation must be accessed through the PIEE platform.

FA8121 Afsc Pzaaa

POSTED

DEADLINE

TRANSDUCER, POSITION / NSN 2915-01-464-1233 / B-1B AIRCRAFT

Solicitation # SPE4A726R0733

The government plans to award an Indefinite Quantity Contract for the supply of DUCT, BLEED AIR, identified by NSN 1560-00-422-1789, under a sole-source or limited-source procurement authorized under FAR 6.302. The contract will have a five-year base period with an Estimated Annual Quantity of 40 units, delivered FOB Destination with inspection and acceptance also at destination. The item is classified as critical but not a Critical Safety Item and is subject to Export Control regulations. Only two approved sources currently exist: Lockheed Martin as the original equipment manufacturer with part number 4P94763-102A and Arrowhead Products with part number 12989-102A. No other sources are approved, and any new contractor must submit a Source Approval Request package to be considered. The Defense Logistics Agency Aviation does not hold complete technical data for this component, which limits competition. The solicitation will not use commercial item acquisition policies, though interested parties may indicate within 15 days if they can offer a commercial item meeting requirements. All contractors must be registered in SAM.gov to be eligible for award, and selection will consider price, past performance, and other factors outlined in the solicitation. The anticipated issue date is August 24, 2026, with responses due by September 25, 2026. The full solicitation will be accessible exclusively via DIBBS in PDF format, and no paper copies will be provided. The contracting office is located in Richmond, Virginia, with primary contact Christopher Rose.

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

CIRCUIT CARD ASSEMB_End_Item_B-2_NSN_5998014281837FW_PN_795306-10

Solicitation # FD20302700176

The U.S. Air Force, through the 422nd SCMS at Tinker Air Force Base, is conducting market research to identify capable sources for the new manufacture of a Circuit Card Assembly with part number 795306-10 and NSN 5998-01-428-1837FW, intended for use on the B-2 platform. This effort is not a solicitation or a commitment to award a contract; no funds are available at this time, and responses are being gathered solely to assess market capabilities and determine the optimal acquisition strategy, including the potential for a Small Business Set-Aside. The requirement calls for the production of four units, encompassing full manufacturing responsibilities such as component procurement, inspection, testing, packaging, shipping, supply chain management, and handling of long-lead items and diminishing manufacturing sources, with nonrecurring engineering costs potentially borne by the vendor. The Government is seeking information from all eligible businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, using a North American Industry Classification System code of 336413 with a size standard of 1,250 employees. The response deadline is August 14, 2026, and submissions must be made through the designated email address, with vendors required to select the “Add Me to Interested Vendors” button to be considered. There is no repair component to this requirement—this is strictly a new production spares acquisition. All activities are governed by FAR Part 10, and the place of performance is Tinker Air Force Base, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONTROL BOX,ELECTRI_End_Item_B-1_NSN_1660011486207_PN_735343

Solicitation # FD20302700175

The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Control Box, Electri, identified by NSN 1660-01-148-6207 and Part Number 735343, for use on the B-1 platform. This effort is a Sources Sought synopsis under FAR Part 10 aimed at assessing industry capability and interest to determine whether the requirement can be procured competitively or designated as a Small Business Set-Aside, with no solicitation or contract award anticipated at this stage. The estimated requirement is for 11 units, and interested vendors must be capable of full new manufacture, including sourcing components, inspection, testing, packaging, shipping, and managing supply chain challenges such as diminishing manufacturing sources and material shortages, along with potential nonrecurring engineering costs. Responses are due by August 14, 2026, in Central Standard Time, and must be submitted via the designated email address 422.scms.afmc.rfi@us.af.mil. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the government welcomes participation from all business sizes, including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. The place of performance is Tinker Air Force Base, Oklahoma, and while no funds are available to support this market research, the information gathered will inform the future acquisition strategy for this critical spare part. Vendors must actively select the “Add Me to Interested Vendors” button to be considered in this effort.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

COMPUTER,SPOILER_End_Item_B-001B_NSN_6615010363198_PN_4030470-903

Solicitation # FD20302602515

The United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of a computer spoiler component with part number 4030470-903 and NSN 6615-01-036-3198, intended for use on the B-001B platform. This effort is not a solicitation and no contract will be awarded based on responses; it is strictly for gathering market information to determine the best acquisition strategy, including whether the requirement can be competitively sourced or set aside for small businesses. The government is seeking input from all types of businesses, including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, with a focus on vendors capable of managing full production cycles including component procurement, inspection, testing, packaging, shipping, and addressing supply chain challenges like diminishing manufacturing sources and long-lead items. The estimated need is for 12 units, and potential suppliers may be expected to absorb nonrecurring engineering costs to become an approved source. The procurement falls under NAICS code 336413 with a size standard of 1,250 employees and is classified under Federal Stock Class 6615. Responses must be submitted via the designated interest button on the platform prior to the deadline, and all communication should be directed to the 421st SCMS at 421scms.requirements.workflow@us.af.mil. The place of performance is Tinker AFB, Oklahoma, and all dates are in Central Standard Time. No funding is currently available, and no contract commitment is implied by this notice.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Manufacture and Supply of Regulating Valve (NSN 4810012626373FW)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Source Approval Request (SAR) Package Development and SubmissionThe contract requires the development and secure submission of a complete Source Approval Request package to qualify as an approved supplier for a control gyroscope component. The work involves documenting all manufacturing processes, quality control procedures, and compliance with applicable quality systems standards to meet institutional and regulatory requirements for source approval. Submission must include detailed technical and operational evidence demonstrating the ability to consistently produce the component to specification under controlled conditions. The solicitation is classified as a subcontract under NAICS code 541611 and is issued by the Department of Defense through Ok DLA Aviation at Oklahoma City. Responses are due by August 14, 2026, with the opportunity posted on August 6, 2026. There is no set-aside designation, and performance location details are unspecified. The process is focused solely on securing formal approval as a qualified supplier, with no additional production or delivery obligations implied in this phase.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Data Development and Engineering Support for Control GyroscopeThe contract seeks technical data development and engineering support for the independent acquisition or reverse engineering of components required to manufacture a control gyroscope, with emphasis on drawing development, engineering analysis, and qualification testing. The work involves deconstructing existing systems to generate accurate technical documentation and perform validated analyses that enable domestic production capability without reliance on original manufacturers. All activities must adhere to rigorous engineering standards to ensure the final product meets performance, durability, and safety specifications equivalent to the original unit. This subcontract is posted by the Department of Defense through the Ok DLA Aviation office in Oklahoma City under NAICS code 541330, indicating a focus on engineering services. The opportunity has a narrow response window, closing on August 14, 2026, at 4:59 AM, and is open to qualified contractors capable of handling sensitive technical reverse engineering tasks under defense contracting protocols. The place of performance and point of contact details are unspecified, suggesting flexibility in execution location but requiring proposers to confirm logistics and compliance independently. The contract does not indicate any set-aside status, meaning all eligible entities may compete.

Engineering Services

POSTED

DEADLINE

Raw Material & Component Supply for Valve Manufacturing

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Source Qualification & SAR Package Preparation

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Data & Engineering Drawing Acquisition

Engineering Services

POSTED

DEADLINE

Manufacture of Butterfly Valves (P/N 458-50005-1)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE