This Subcontract opportunity from Louisiana was posted on October 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Detention Security Doors

Closed

State & Local

Submission Closed10/29/2026, 11:00:00 AM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

SLED

CDBG-DR ECAT Bus Shelter Manufacturing Project HS018 - Re-Solicit

Solicitation # PD 26-27.008

Solicitation PD 26-27.008 is an Invitation to Bid issued by Escambia County for the manufacture and delivery of 91 pre-manufactured bus shelters for Escambia County Area Transit. Funded through the Community Development Block Grant Disaster Recovery (CDBG-DR) Program, this project is part of a broader long-term recovery effort following Hurricane Sally to improve streetscapes and economic viability in low- and moderate-income areas. The scope includes 81 three-seater shelters (with a four-seater alternate option), 9 six-seater shelters, and 1 twelve-seater shelter. Each unit must feature solar-powered lighting and advertising space on each side. The contract requires delivery in four lots of approximately 25 units, with the first shipment due by November 30, 2026, and subsequent shipments every 30 days. Awarding is principally based on the lowest responsive and responsible bid. Contractors must comply with stringent federal and state regulations, including HUD Section 3 requirements for economic opportunities for low-income residents, the Davis-Bacon Act for prevailing wages, ADA standards, and Florida's E-Verify system. Bidders are required to provide performance and payment bonds for 100 percent of the contract price and submit comprehensive documentation via the OpenGov portal, including SAM registration and a Florida Certificate of Authority to do Business.

POSTED

DEADLINE

Pre-Engineered Metal Building (PEMB) Manufacturer/SupplierThis subcontract opportunity is for a Pre-Engineered Metal Building manufacturer and supplier to provide complete, clear-span, rigid steel frame building systems for prime contractors working on Colorado Department of Natural Resources facility projects. The selected supplier is responsible for the design of the building system, the fabrication of the rigid steel frame, and the provision of all specified louvers, windows, and doors. All deliverables must adhere to industry standards including ASTM, AISI, AISC, AHDGA, AWS, and MBMA. The scope of work culminates in the delivery of a complete PEMB kit to the project site, fully prepared for erection. This procurement is managed by the Colorado Division of Parks and Wildlife under NAICS code 332323. Interested parties should note the response deadline of November 19, 2026.

DNR - Division Of Parks & Wildlife

POSTED

DEADLINE

Bear-Resistant Food Locker SupplierThis subcontract involves the supply of six fully assembled bear-proof food lockers for prime contractors working on State of Alabama projects at DeSoto State Park. The required units must be IGBC-certified and constructed from die-formed 12-gauge steel featuring a brown texture powder coat, louvered ventilation, and interior hanging hooks. Each unit must include the necessary mounting plates and concrete screw anchors for installation. The supplier is strictly required to provide Interagency Grizzly Bear Committee certification to ensure the lockers meet safety and durability standards. This procurement falls under NAICS code 332323 and is managed through the state of Alabama for the DeSoto agency.

POSTED

DEADLINE

Modular ADA Dock System FabricationThis subcontract involves the fabrication of a modular ADA dock system for prime contractors working on Ohio Department of Natural Resources projects. The scope of work requires the production of galvanized steel dock sections utilizing 2 by 2 by 3/16 inch angle frames, aluminum bleacher-style fishing benches, and ADA-compliant handrails featuring integrated toekicks. Assembly specifications include the use of allen-head pipe fittings and galvanized hex head bolts. The completed modular dock components are to be delivered to Mosquito Lake State Park. This opportunity is categorized under NAICS code 332323, with a response deadline set for December 10, 2026.

Dnr353411 Mosquito Lake State Park Dnrtru

POSTED

DEADLINE

Waste Container Supply and MaintenanceThis subcontract involves the supply and maintenance of waste containers for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The provider is responsible for delivering rollable, liquid-tight containers equipped with steel wheels and either steel or double-walled plastic lids that meet DuraFlex or equivalent industry standards. Ongoing maintenance requirements include monthly steam cleaning and annual painting to ensure the containers remain in optimal condition. The solicitation was posted on November 12, 2026, with a response deadline of December 9, 2026, falling under NAICS code 332323.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Supply of CRN PA FRONT ComponentThis subcontract involves the manufacture and supply of one unit of the CRN PA FRONT component, identified by NSN 8145-01-586-4489, for prime contractors working on DLA Troop Support projects. The component must be produced according to part number 0891-11138-1 and TDP Rev A Gen 1 specifications, with packaging completed in accordance with ASTM D3951 standards. The Department of Defense agency Construction and Equipment Containers oversees this requirement, which mandates delivery to the Letterkenny Army Depot in Chambersburg within five days of the order. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026, falling under NAICS code 332323.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Custom Utility Access Door ManufacturerThis subcontract involves the manufacture of one utility access door, identified by NSN 5340016188796, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Basic Drawing NR 5B5M3 11B5091423 Revision C and Reference Drawing NR 5B5M3 11B5091423 Revision 09. Performance will take place in Fort Campbell, Kentucky. The selected manufacturer must hold ISO 9001:2015 certification to ensure quality standards. Additionally, the contractor is required to apply markings in accordance with MIL-STD-130N and MIL-STD-129, while ensuring all packaging complies with MIL-STD-2073-1E. The response deadline for this requirement is November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Corrosion Resistant Steel Sheet Supply (304 Stainless)This subcontract involves the supply of specialized 304 stainless steel sheets to prime contractors supporting the Defense Logistics Agency. The requirement is for a single cold-finished and annealed steel sheet measuring 0.044 inches thick, 36 inches wide, and 10 feet long. The material must strictly adhere to metallurgical and physical specifications outlined in ASTM A240/A240M-26, SAE AMS2807C, TDP Rev B Gen 2, and QAP 13873 quality assurance standards. The opportunity was posted on November 12, 2026, with a response deadline of November 23, 2026. Classified under NAICS code 332323, the contract is managed through the Department of Defense for performance at Offutt AFB, zip code 68113-4014.

Defense Logistics Agency

POSTED

DEADLINE

HEATER, WATER, ELECTRIC

Solicitation # SPE8E8-27-T-0704

Solicitation SPE8E8-27-T-0704, issued by DLA Troop Support Construction and Equipment, seeks quotes for 32 electric water heaters, identified by NSN 4520-01-540-7938 and part number XFC404503ES from The Electric Heater Co. The requirement is designated under NAICS 332323 and is set aside for Women-Owned Small Businesses. Quotes must be submitted via the DLA Internet Bid Board System by November 23, 2026. Delivery is required within 90 days after receipt of order, with the shipping point designated as FOB Origin and the delivery destination as the DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 and MIL-STD-129, with general packaging following ASTM D3951. Technical and quality requirements are governed by the DLA Master List (RA001), and the government will perform inspection and acceptance at the destination. Offerors proposing alternate parts must provide a complete data package for evaluation, and items produced via additive manufacturing are ineligible for award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Miscellaneous Metals ContractorThis subcontract opportunity is for a Miscellaneous Metals Contractor to support prime contractors on government facility projects for the Clayton County Board of Commissioners in Georgia. The scope of work involves the fabrication and installation of secondary metal elements, specifically focusing on metal stairs, ladders, pipe and tube railings, and various decorative or ornamental metalwork. The solicitation was posted on November 12, 2026, with a response deadline of December 22, 2026. Operating under NAICS code 332323, the selected contractor will be responsible for the full delivery and installation of all specified metal components to ensure the completion of facility infrastructure requirements.

Clayton County Board of Commissioners

POSTED

DEADLINE

Miscellaneous and Ornamental Iron ContractorThis subcontract opportunity is for a Miscellaneous and Ornamental Iron Contractor to support prime contractors on municipal projects within the City of Cambridge. The selected contractor will be responsible for the fabrication, supply, and installation of various metal components, including railings, metal supports, and ornamental ironwork for city facilities. Managed by Capital Buildings Projects in Massachusetts, the solicitation was posted on November 12, 2026, with a response deadline of December 3, 2026. The work falls under NAICS code 332323 and requires the delivery of fully installed metalwork and iron components as specified for the municipal projects.

Capital Buildings Projects

POSTED

DEADLINE

Metal Lattice Fabrication and InstallationThis subcontract involves the fabrication and installation of metal lattice structures for prime contractors working on US Army Corps of Engineers projects at the Tripler Army Medical Center in Hawaii. The scope of work specifically requires the creation and mounting of green screen metal lattices along the southwest edges of each garage level to provide necessary support for vining plants. Managed by the Department of Defense through W2SN Endist Honolulu, the project falls under NAICS code 332323. The solicitation was posted on November 12, 2026, with a response deadline set for December 5, 2026. The final deliverable is the complete installation of the metal lattice supports at the designated site in zip code 96859.

W2SN Endist Honolulu

POSTED

2 days ago

DEADLINE

in 21 days

AI Contract Overview

This subcontract involves the procurement of ten new detention-grade security doors and all associated hardware for prime contractors working on Louisiana Office of Juvenile Justice projects. The selected provider must source materials under Product Category 30171500 that adhere to strict quality and performance standards, providing all necessary technical data and descriptive literature for any equivalent models proposed. The contract requires the delivery of all materials F.O.B. Destination to the Jetson Center for Youth. Managed by the Louisiana Procurement agency under NAICS code 332323, the solicitation was posted on October 8, 2026, with a response deadline of October 29, 2026.

General Info

Procurement of ten detention-grade security doors and hardware for Louisiana Office of Juvenile Justice.

Agency

Louisiana → Procurement

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

LA, USA

Set-Aside

NONE

Documents

This scope was carved out of 3000026781.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Security Doors Installation - OJJ

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 8

subcontract

Response DeadlineOct 29

Deadline has passed

Submission Closed

10/29/2026, 11:00:00 AM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyLouisiana → Procurement

ContactsNo contacts available

OfficeN/A

Organization / AgencyLouisiana → Procurement

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies ten new detention security doors and associated hardware for prime contractors on Louisiana Office of Juvenile Justice (OJJ) projects. Sources or manufactures detention-grade security doors (Product Category 30171500) and hardware meeting specific quality and performance standards. Provides technical data and descriptive literature for equivalent models. Delivers materials F.O.B. Destination to the Jetson Center for Youth.