Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Dewar Flasks (Cryogenic Liquid Nitrogen Storage)

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the procurement and delivery of aluminum Dewar flasks designed to safely store and transport up to 25 liters of liquid nitrogen, ensuring secure handling of cryogenic materials under extreme temperature conditions. These flasks must meet rigorous performance and safety standards to maintain thermal integrity, prevent vapor loss, and withstand the operational demands of medical and research environments. The delivery location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the designated site for fulfillment and distribution. Issued under the NAICS code 332215 for metal stamping and forged products, the contract is classified as a subcontract and was posted on July 22, 2026, with a response deadline of July 28, 2026. It is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, reflecting its importance in supporting defense-related medical infrastructure. All bids must comply with technical specifications for durability, insulation efficiency, and cryogenic compatibility, and must be submitted via the DIBBS portal before the deadline to be considered.

General Info

Procurement of 25-liter aluminum Dewar flasks for cryogenic transport to New Cumberland, PA, for DoD medical use.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

332215 - Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of aluminum Dewar flasks capable of storing up to 25 liters of liquid nitrogen, used for safe transport and storage of cryogenic materials.

Similar Contracts

Same NAICS industry code

Manufacture of Electric Soldering Tips (TIP, ELECTRIC SOLDER)The contract requires the fabrication of electric soldering tips to meet stringent military-grade standards for durability, electrical conductivity, and material safety, ensuring full compliance with DLA RA001 and DFARS 252.223-7001 regulations. These components are critical for defense-related applications and must be manufactured with precision using approved materials and processes that guarantee long-term performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 332215, indicating specialized metal fabrication activities within the broader industrial sector. The solicitation was posted on July 22, 2026, with a response deadline set for August 3, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP New Cumberland Facility under the Department of Defense, indicating a direct alignment with defense logistics and supply chain requirements. While no set-aside provisions or point of contact details are specified, the inclusion of federal regulatory frameworks underscores the strict adherence to compliance, quality control, and supply chain integrity expected from the vendor. All deliverables must meet unambiguous military specifications to ensure interoperability and reliability in critical defense systems.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacture of Desoldering Tips (TIP, SUCTION DEVICE)The contract requires the manufacture of precision desoldering tips that fully comply with the DLA Master List RA001 specifications, ensuring strict adherence to performance and quality standards. Production must meet rigorous requirements for thermal resistance, material composition, and dimensional accuracy, with comprehensive quality control and testing protocols applied at every stage to guarantee reliability and consistency. The delivered products must be suitable for use in defense and aerospace applications where precision and durability are critical. The solicitation, titled Manufacture of Desoldering Tips TIP, SUCTION DEVICE, was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332215. The contracting activity is the DDSP NEW CUMBERLAND FACILITY, under the Department of Defense, with performance exclusively located at the New Cumberland facility in Pennsylvania, zip code 17070-5002. All bids must be submitted through the DIBBS system using the provided solicitation link, and bidders are expected to demonstrate proven capability in producing high-precision metallurgical components meeting military-grade specifications.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Electrical Contact Component ManufacturingThe contract entails the manufacture and delivery of 274 units of electrical contacts designated by NSN 5999-01-208-0677 and part number C10751-4, requiring strict adherence to military specifications for precision metal fabrication. Each unit must meet defined performance and dimensional standards to ensure reliability in defense applications, with packaging fully compliant with MIL-STD-129 for uniformity, labeling, and handling during military logistics operations. The work is to be performed under a small business set-aside, reserved exclusively for total small business concerns as defined by the SBA under FAR 19.5, reinforcing the Department of Defense's commitment to supporting small business participation in critical supply chain initiatives. The contract falls under NAICS code 332215, aligning with the manufacturing of small arms, ordnance, and ordnance accessories, and was posted on July 22, 2026, with a response deadline of August 6, 2026. It is structured as a subcontract under the Maritime Supply Chain, a division of the Department of Defense, and is accessible via the DIBBS platform for qualified small business vendors. All deliveries must be completed to meet military delivery timelines and quality assurance benchmarks, ensuring seamless integration into defense systems without disruption to operational readiness.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electrical Contact Assembly ManufacturingThe contract involves the manufacture and supply of electrical contact assemblies to meet stringent military specifications as part of the DLA Maritime Supply Chain. The work requires precision assembly techniques, strict material sourcing protocols, and comprehensive quality control measures to ensure compliance with defense standards. All components must be produced in accordance with applicable military requirements, with end-to-end accountability for performance, reliability, and traceability throughout the production lifecycle. The solicitation is issued as a subcontract under NAICS code 332215, with a response deadline of August 6, 2026, and was posted on July 22, 2026. The work is being managed by the Department of Defense through its Maritime Supply Chain organization, and performance is expected to support critical naval and maritime systems. While specific delivery locations and points of contact are not detailed, the contract emphasizes full adherence to defense supply chain integrity and operational readiness expectations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Tool Set, Bridge REM (NSN: 5210015831759)The contract calls for the supply of one unit of a Tool Set, Bridge REM identified by NSN 5210015831759, meeting stringent military specifications for marking, packaging, IUID compliance, and hazardous materials handling. This requirement is issued under a subcontract arrangement by the DDSP NEW CUMBERLAND FACILITY, a component of the Department of Defense, with performance required at the location in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, with the North American Industry Classification System code 332215 indicating the appropriate manufacturing category for this procurement. The acquisition is focused on delivering a single, fully compliant tool set that adheres to all federal and military logistics and safety standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PAN, STEAM TABLEThe contract pertains to the procurement of a full-size steam table pan with perforations, manufactured from 20-gauge material, identified by NSN 7310-01-390-2620, with a total quantity of 24 boxes required. The procurement is conducted under a fully competitive process in accordance with military and federal specifications, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. Compliance with applicable revisions is determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, with amendments overriding the original revision if issued. The government mandates the removal of any government identification from supplies that are not accepted. The solicitation, numbered SPE3SE-26-Q-0399, was posted on July 22, 2026, with responses due by July 28, 2026, and delivery must be completed within 30 days of award. The contracting entity is the Department of Defense’s Subsistence FSE Supply Chain, with primary point of contact Nicholas D’Aulerio, reachable via email and phone. The contract is subject to Covered Defense Information requirements, indicating sensitivity around handling and safeguarding data.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Cutlery and Tactical Tools

POSTED

DEADLINE

Commercial Cooler Door Hardware and Hinges

USP Terre Haute

POSTED

DEADLINE

DFAC TraysThe solicitation for Dining Facility Trays under contract number FA301626Q0200 is a total small business set-aside issued by the Department of Defense through the FA3016 502 Cons Cl office located at JBSA LACKLAND, Texas. All responses must be submitted by July 29, 2026, at 4:00 PM EST, and the contract is classified under NAICS code 332215, which pertains to the manufacturing of metal containers and similar products. The procurement is open exclusively to small businesses as defined by the SBA, ensuring opportunities are reserved for eligible small enterprise vendors. The trays must be manufactured in strict compliance with the detailed specifications provided in the attached documentation to meet operational standards for military dining facilities. Primary point of contact for inquiries and submissions is Kyle Sarrett, reachable at 210-671-1872 or kyle.sarrett@us.af.mil, with all communications and proposals directed through the SAM.gov platform using the provided UI link. Performance of the contract will occur at the specified delivery location with a ZIP code of 78236, and no alternative performance locations are indicated. The combined solicitation type indicates that both commercial and non-commercial offers may be considered, but all bids must satisfy the small business eligibility requirements and technical specifications to be eligible for award.

FA3016 502 Cons Cl

POSTED

DEADLINE

Supply of File Set, Riffler - Hand Tool ManufacturingThe contract requires the manufacture and delivery of a File Set, Riffler, a hand tool, in strict compliance with Defense Logistics Agency packaging, marking, and quality standards, with a zero defect acceptance requirement. All deliverables must be submitted through the Wide Area Workflow system to ensure proper documentation and tracking. The item falls under NAICS code 332215, which pertains to hand and edge tool manufacturing, indicating the specialized nature of the production process. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the responsible agency is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. This transaction is classified as a subcontract, though no specific set-aside type is identified. The solicitation was posted on July 21, 2026, with a response deadline of July 29, 2026, providing a narrow window for interested parties to submit proposals.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Tooling and Die FabricationThe contract involves the design and fabrication of specialized tooling and dies necessary for forming aircraft skin components, specifically when such work is outsourced by the prime contractor. This subcontract falls under NAICS code 332215, indicating it is related to die setting and stamping operations, and is managed by the Defense Logistics Agency under the Department of Defense. The work is intended to support critical aerospace manufacturing processes and must meet precise engineering standards to ensure compatibility with the prime’s assembly requirements. The solicitation was posted on July 21, 2026, and while no set-aside designation or location details are specified, the performance location is implied to align with the prime’s supply chain needs. The contract serves as a key enabler in the production lifecycle of military aircraft components, requiring advanced capabilities in precision tooling and quality control.

Defense Logistics Agency

POSTED

DEADLINE

Critical Safety Item (CSI) Component SourcingThe contract involves the supply of traceable, certified critical safety components, such as bearings, intended for integration into military valves used in defense systems. All components must come with a complete pedigree, ensuring end-to-end provenance and compliance with Defense Logistics Agency sourcing requirements. The items are classified as Critical Safety Items, requiring strict adherence to quality, documentation, and chain-of-custody standards to guarantee performance and reliability in mission-critical applications. The subcontract is issued under NAICS code 332215, indicating manufacturing of other metal valve and pipe fitting products, and is sourced through the Department of Defense via the Defense Logistics Agency. The contract was posted on July 21, 2026, and the place of performance and point of contact details are not specified, but compliance with DLA protocols is mandatory throughout the supply chain. The award reference number SPE4A626PK267 is accessible through the DIBBS system for official verification and tracking.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.

Pharmaceutical Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.

Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.

Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.

Corrugated and Solid Fiber Box Manufacturing

POSTED

about 17 hours ago

DEADLINE

CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.

Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE