Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Eaton Engine Fuel Pump Parts Kits (NSN 2915010101915)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of nine Eaton Engine Fuel Pump Parts Kits, specifically part number 214995 under NSN 29150101915, to support prime contractors for the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to DLA Master List requirements RA001 and RP001, with quality assurance conducted via zero-based sampling in accordance with MIL-STD-1916. All items must be packaged according to ASTM D3951 and MIL-STD-129 standards for delivery to the DLA Distribution Depot Oklahoma located at Tinker AFB. The procurement falls under NAICS code 423840 and is managed by the Department of Defense.

General Info

Supply nine Eaton Engine Fuel Pump Parts Kits to DLA Distribution Depot Oklahoma.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

423840 - Industrial Supplies Merchant Wholesalers

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1604.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PARTS KIT, ENGINE FUEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Engine Fuel Pump Parts Kits for prime contractors delivering DLA Weapons Support contracts. Sources Eaton Corp P/N 214995 per NSN 2915010101915. Ensures compliance with DLA Master List requirements RA001 and RP001 and zero-based sampling per MIL-STD-1916. Packages items per ASTM D3951 and MIL-STD-129. Delivers nine completed kits to DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

Supply of Piston Rings (NSN 4310017062926)This subcontract involves the supply of piston rings, specifically RIX INDUSTRIES part number 18-20420-8R1 under NSN 4310017062926, to support prime contractors fulfilling DLA supply contracts. The agreement requires the delivery of 16 units to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict military standards for logistics, including packaging items according to MIL-STD-2073-1E and marking shipments per MIL-STD-129. Shipments are required to utilize specified D3 unit containers and E5 intermediate containers. This procurement is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Decoder-Receiver (PN 85921-00)This subcontract involves the procurement of one Commercial Off-The-Shelf decoder-receiver, part number 85921-00, manufactured by FreeFlight Acquisition Corporation. The equipment is intended for prime contractors working on DLA Weapons Support ASC projects and must adhere to the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin, with the place of performance located in Tracy, California. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. To be eligible, providers must ensure strict compliance with the Buy American Act and the Berry Amendment. Additionally, the contract mandates that the supplier meet CMMC Level 2 and NIST SP 800-171 assessment standards for cybersecurity and data protection.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Electrostatic Discharge (ESD) Packaging MaterialsThis subcontract involves the supply of DOD-qualified barrier materials for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work focuses on providing certified electrostatic discharge and electromagnetic sensitive packaging materials, specifically anti-static bags and conductive foam. All supplied materials must strictly adhere to MIL-PRF-81705 and MIL-STD-2073-1E requirements to ensure the protection of sensitive electronic devices. The project is managed under NAICS code 423840 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties should note the response deadline of November 2, 2026, for this specialized procurement of ESD and EMS packaging solutions.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Damper Repair Kit Supplier

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Salinity Sensor SupplyThis subcontract involves the procurement and delivery of 2,000 salinity sensors, specifically Village Marine part number 106101-00, for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The agreement mandates an exact part number match and strict adherence to prohibitions against mercury-free hardware. To ensure quality and security, the provider must utilize ISO 9001:2015 manufacturer inspection systems and comply with all domestic sourcing and cybersecurity clauses. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 423840.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Internal Wrenching Bolts (Bosch Rexroth)This subcontract involves the procurement and delivery of 13 specialized internal wrenching bolts, specifically Bosch Rexroth GmbH Lohmann Part Number -41715 Item 21, under NSN 5306-01-486-3308. These components are intended for prime contractors supporting DLA Weapons Support ASC contracts. The supplier is responsible for performing physical identification and bare item marking in accordance with RQ017 and must ensure all materials are mercury-free. To qualify, the manufacturer must provide certification to either SAE AS9003 or ISO 9001 standards. The final products are to be delivered to the DDSP facility located in New Cumberland, Pennsylvania. This requirement falls under NAICS code 423840 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts (NSN 5310-00-894-4990)This subcontract involves the procurement and delivery of 22 specialized self-locking hexagon nuts, part number GYN165, for the DLA Weapons Support ASC Commodities Division. The items must be sourced from approved manufacturers, specifically Meggitt Aircraft Braking Systems Corp or SPS Technologies, and delivered to Fort Bragg, North Carolina. The contractor is required to adhere to strict quality and packaging standards, including DLA Packaging Requirements RP001 and the DLA Master List RA001. Additionally, the contract mandates the execution of zero-based sampling plans in accordance with MIL-STD-1916 or ASO H1331 to ensure compliance with Department of Defense specifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of MTU Intake Air Cleaners (NSN 4310016312709)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the procurement and supply of seven MTU Friedrichshafen GmbH intake air cleaners, part number 0150941202. The items must be packaged and marked in accordance with ASTM D3951, MIL-STD-129, and DLA RP001 standards, with final delivery designated as FOB Origin to DLA Distribution San Joaquin in Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. Awardees must ensure strict compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Responses are due by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Intake Air Cleaner SupplyThis subcontract involves the procurement or manufacture of three intake air cleaners, specifically NSN 2940015968028 or Red Dot Corporation part number RD-5-13290-0P, for prime contractors supporting DLA Weapons Support Land Supplier Operations. The project is managed under the Department of Defense and falls under NAICS code 423840, with the place of performance located in New Cumberland. The contractor must ensure strict adherence to the Buy American Act and the DLA Master List of Technical and Quality Requirements. All items must be packaged according to ASTM D3951 and MIL-STD-129 standards and palletized following RP001 guidelines. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Intake Air Cleaner Supplier (NSN 2940-01-644-4111)This subcontract involves the supply of three intake air cleaners for prime contractors supporting DLA Weapons Support Land Supplier Operations. The required hardware must be Donaldson Company part number D120165, which corresponds to NSN 2940-01-644-4111, and must adhere to the DLA Master List of Technical and Quality Requirements. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed under NAICS code 423840 for the Department of Defense, with the place of performance located in Barstow, California. Compliance with DFARS 252.204-7012 cybersecurity regulations and DFARS 252.225-7001 Buy American standards is mandatory. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Supply of Hatch Door Hardware and FastenersThis SDVOSB set-aside subcontract involves the supply of specialized hatch door hardware and fasteners for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The scope of work requires the procurement of hinges, latches, seals, and fasteners that adhere strictly to reference drawing specifications. The contractor is responsible for delivering kitted hardware sets for nine hatch door assemblies, ensuring all items include full material certifications and traceability. Compliance requirements include the submission of Safety Data Sheets for all hazardous materials in accordance with 29 CFR 1910.1200(g). The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423840. Interested parties must have responded by the deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Supply of Valve Stem Guides (P/N B11424)This subcontract involves the supply of 32 packaged valve stem guides, part number B11424, sourced from Dante Valve Company for prime contractors under a DLA supply contract. The items must strictly adhere to RA001 quality standards and comply with NAVSEA 5100-003D mercury restrictions. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129. The agreement is managed through the Department of Defense via DLA DIST SAN JOAQUIN, with performance taking place in Tracy, California. The contractor is required to comply with DFARS 252.225-7001 Buy American requirements. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Special Plug (NSN 5342-00-839-1515)This subcontract involves the procurement of 13 units of a special plug, identified by NSN 5342008391515, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for fabricating or sourcing the hardware to ensure full compliance with the established NSN technical specifications. Strict adherence to military and industry standards is required for quality assurance and logistics. All items must be inspected and sampled according to MIL-STD-1916 or ASQ H1331 Table 1, packaged in accordance with ASTM D3951, and marked and labeled per MIL-STD-129. Performance of the contract will take place in Cherry Point, with a response deadline set for November 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720-01-245-6616)This subcontract involves the supply of 709 feet of specialized nonmetallic tubing for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must feature a 0.050 inch inner diameter and a 0.110 inch outer diameter, strictly adhering to Saint-Gobain F4040A specifications. The supplier is responsible for ensuring all materials comply with the Buy American Act and ASTM D3951 standards. Additionally, all products must be packaged and marked in accordance with MIL-STD-129 and DLA Master Lists RA001 and RP001. Performance for this contract is centered in Tracy, California.

All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

DLA Compliant Packaging and PrepThis subcontract, titled DLA Compliant Packaging and Prep, involves the specialized packaging and preparation of filter assemblies for prime contractors fulfilling DLA supply contracts. The scope of work requires all components to be packaged and labeled using industrial materials in strict accordance with RP001 DLA Packaging Requirements to ensure protection during transit and full adherence to government receiving standards. The final deliverables must be ready for First Destination Transportation. The project is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 2, 2026, and the associated NAICS code 561910.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

High Pressure Prefilter Assembly Cap ManufacturingThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacturing of high pressure fluid filter covers and prefilter assembly caps. The selected provider will be responsible for delivering finished physical assemblies to prime contractors, utilizing precision CNC machining, casting, or fabrication. All products must be constructed from high pressure rated alloys and strictly adhere to the DLA Master List of Technical and Quality Requirements as well as RP001 packaging standards. The project falls under NAICS code 332710 and is designated for performance in Tracy, California. Interested parties must note the response deadline of November 2, 2026, for this specific manufacturing requirement.

POSTED

about 7 hours ago

DEADLINE

Supply of Regulator Valves (NSN 4820-01-113-6739)

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

CRES 304 Raw Material SupplyThis subcontract involves the supply of certified CRES 304 raw material billets or bar stock to support prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing and delivering corrosion resistant steel that includes full material traceability and certifications directly to the manufacturer. Performance of this contract takes place in Cherry Point, North Carolina, under NAICS code 331110. All materials provided must strictly adhere to the requirements of the Buy American Act and the Berry Amendment. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 7 hours ago

DEADLINE

Passivation of CRES 304 Aerospace FittingsThis subcontract involves the chemical passivation of 108 CRES 304 tube reducer unions for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected contractor will utilize industrial chemical baths to remove free iron and contaminants from the stainless steel surfaces, ensuring all work adheres to strict aerospace standards for 300 series stainless steel. The project requires the contractor to hold aerospace-grade chemical processing certifications to ensure compliance and quality. Performance will take place in Cherry Point, and the final deliverable consists of 108 fully passivated tube reducer unions.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS