Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Electrical Contact Brushes (NSN 5977013976747)

Active

Federal

Response Deadline10/30/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense DLA Weapons Support Fluid Handling Division involves the manufacture or sourcing of 104 electrical contact brushes, specifically part NSN 5977013976747. The selected provider is responsible for performing First Article Testing to ensure all technical specifications are met and must deliver both the units and a corresponding FAT report. Logistics for the shipment will be coordinated through First Destination Transportation. To be eligible, contractors must provide a valid CAGE code and UEI, while maintaining strict compliance with restrictions regarding covered defense telecommunications equipment. The contract falls under NAICS code 335999 and requires the supplier to support prime contractors in fulfilling broader DLA supply obligations.

General Info

DOD subcontract for 104 electrical contact brushes including First Article Testing and delivery.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

OH

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1442.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRUSH, ELECTRICAL CO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 12:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical contact brushes for prime contractors delivering DLA supply contracts. Manufactures or sources part NSN 5977013976747 and performs First Article Testing (FAT) to verify technical specifications. Coordinates delivery via First Destination Transportation (FDT). Requires CAGE code, UEI, and compliance with covered defense telecommunications equipment restrictions. Delivers 104 units and a FAT report.

Similar Contracts

Same NAICS industry code

Bus Control Panel SupplyThis subcontract for Bus Control Panel Supply involves the provision of electronic and mechanical control panels for prime contractors working on SORTA transit bus projects. The scope of work specifically requires the delivery of 30 RH/CS Control Panel Kits and 18 Fire Box Control Panels, all of which must adhere to strict transit safety and electrical standards. Managed under the Maintenance agency in Ohio, the contract is categorized under NAICS code 335999. The solicitation was posted on October 22, 2026, with a response deadline set for November 23, 2026.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Power Distribution Panel Assembly and ManufacturingThis subcontract involves the manufacture and assembly of 93 Power Distribution Panels for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires fabrication according to Reference Drawing NR 16236 EI-015236331 and TDP Rev B Gen 2, including the integration of electrical components and marking in compliance with MIL-STD-129. Performance will take place in New Cumberland, Pennsylvania. To qualify for this contract, providers must hold CMMC Level 2, ISO 9001:2015, and JCP certifications to handle export-controlled data. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, under NAICS code 335999.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Thermostatic Switches (NSN 5930-01-625-8090)This subcontract involves the supply of 13 thermostatic switches, part number 444-10NL-444177, meeting NSN 5930-01-625-8090 specifications for prime contractors delivering to the DLA Weapons Support Electrical Devices Division. The contractor is responsible for ensuring all units comply with the Buy American Act and adhere to strict military standards for preservation, marking, and packaging, specifically MIL-DTL-28786, MIL-STD-129, and MIL-STD-2073-1E and RP001. The items are to be delivered FOB Origin to DLA Distribution DDSP in New Cumberland. The procurement falls under NAICS code 335999 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

Precision Manufacturing of Connector AdaptersThis subcontract involves the precision manufacturing of 37 connector adapters, specifically NSN 5935-00-211-2324, for the DLA Weapons Support Active Devices Division. The fabrication must strictly adhere to source-controlled drawings provided by Northrop Grumman or SV Microwave, and the use of additive manufacturing is expressly prohibited. Finished units are to be delivered FOB Origin to Tinker AFB. To be eligible, the contractor must maintain JCP certification, ITAR/EAR authorization, and CMMC Level 2 compliance. The project falls under NAICS code 335999 and is managed by the Department of Defense. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Conductor Splices (NSN 5940015952368)This subcontract involves the manufacture or procurement of 876 conductor splices, specifically part number TE Connectivity S03-08-R-100H (NSN 5940015952368), to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC. The items must be delivered FOB Origin and must adhere to strict packaging and marking standards, including MIL-STD-129 and ASTM D3951, as outlined in the DLA Master List of Technical and Quality Requirements. The contract mandates strict regulatory compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 335999. Interested parties must have submitted responses by the October 30, 2026, deadline.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Branched Power Cable Assembly FabricationThis subcontract involves the fabrication of branched electrical power cables for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with Reference Drawing NR 53711 8216904 Rev A, with strict adherence to RQ017 for bare item marking and MIL-STD-129 for packaging. All completed cable assemblies must be delivered with Certificates of Quality Compliance. The project is a total small business set-aside under NAICS code 335999, with performance located in New Cumberland. To be eligible, contractors must maintain CMMC Level 2, ISO 9001/AS9003, and JCP Certification to handle export-controlled data. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Connector Adapters (NSN 5935004021153)This subcontract involves the supply of 26 specialized connector adapters, identified by NSN 5935004021153, for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing the items while adhering to strict quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all units must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. The agreement explicitly prohibits the use of additive manufacturing in the production of these components. Delivery is required FOB Origin to DLA Distribution San Joaquin, located in Tracy, California. The project falls under NAICS code 335999 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Cable Hangers (NSN 5975-01-368-6742)This subcontract involves the manufacture or procurement of 91 cable hangers meeting NSN 5975-01-368-6742 specifications for prime contractors supporting the Department of Defense. The project is managed under the DLA Weapons Support ASC Supplier Oper AE and AF Div and falls under NAICS code 335999. The contractor must adhere to strict quality and safety standards, including sampling per MIL-STD-1916 or ASQ H1331, preservation per MIL-PRF-23199E, and packaging and marking according to MIL-STD-2073-1E and MIL-STD-129P. Additionally, compliance with 29 CFR 1910.1200 is required. All 91 units are to be delivered FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

RF Cable Assembly Production (NSN 5995015890228)This subcontract involves the manufacture and supply of six Radio Frequency cable assemblies for prime contractors under a Department of Defense DLA Weapons Support ASC Commodities Division contract. The assemblies must be fabricated according to NSN 5995015890228, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. All items must be packaged and marked in strict accordance with RP001, MIL-STD-2073-1E, and MIL-STD-129. To qualify, the provider must possess RF-grade cabling and precision termination equipment, while maintaining ISO 9001:2015 certification and CMMC Level 2 compliance. The work will be performed in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Special Purpose Electrical Cable Assemblies (NSN 5995017328005)This subcontract involves the manufacture of 10 special purpose electrical cable assemblies, identified by NSN 5995017328005, for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the units according to RA001 specifications and ensuring all materials are mercury-free in compliance with IP056. The project requires strict adherence to quality assurance sampling per MIL-STD-1916 or ASQ H1331, with packaging and marking performed according to MIL-STD-2073-1E and MIL-STD-129. The final deliverable consists of completed, tested, and packaged cable assemblies to be performed in Tracy, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Electrical Lead ManufacturerThis subcontract involves the manufacture of electrical leads for prime contractors supporting the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected manufacturer is responsible for fabricating finished electrical leads, identified by NSN 6150-01-270-3738, in strict accordance with TDP Rev A Gen 1, Basic Drawing NR 53711 6105137 Rev B, and Reference Drawing NR 53711 5205406 Rev G. Quality assurance must be performed following MIL-STD-1916 or ASQ H1331 standards. To be eligible, the contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with DFARS 252.204-7012. The work is categorized under NAICS code 335999 and will be performed in Bremerton, Washington. Interested parties must respond by October 29, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Nonmetallic Hose Material SupplierThis subcontract involves the supply of raw nonmetallic tubing and fitting materials for prime contractors working on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for providing materials that meet the specific technical data package for NSN 4720-01-626-0409 and must deliver raw hose materials and components directly to the manufacturer. A critical requirement of the contract is the provision of certifications of conformance to ensure full compliance with the Berry Amendment and the Buy American Act. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with the place of performance located in Pearl Harbor.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturer (NSN 4720-01-626-0409)This subcontract opportunity is for the manufacture of four nonmetallic hose assemblies, specifically NSN 4720-01-626-0409, to support the DLA Weapons Support Fluid Handling Division. The selected contractor must perform fabrication, quality inspection, packaging, and marking in strict accordance with SAE AS9003 or ISO 9001, MIL-STD-2073-1E, and MIL-STD-129 standards. Performance will take place in Pearl Harbor, Hawaii. Eligible bidders must hold ISO 9001 or SAE AS9003 certification and maintain JCP certification to ensure compliance with ITAR and EAR regulations. This project is designated as a Total Small Business Set-Aside under FAR 19.5. Responses are due by November 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Globe Valve Parts Kit SupplierThis subcontract involves the supply of 49 completed and packaged globe valve parts kits for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The scope of work includes the manufacturing or sourcing of components, kit assembly, and packaging in strict accordance with MIL-STD-2073-1 Appendix D. Additionally, the supplier must ensure all marking and labeling comply with MIL-STD-129 and provide Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. The project falls under NAICS code 332911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 2, 2026, to be considered for this procurement effort.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 97 hose assemblies, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001. The contractor must utilize industrial labeling equipment and MIL-SPEC packaging materials to meet strict military standards. The completed deliverables are to be transported to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 493110 and is designated for prime contractors supporting the agency's fluid handling operations.

General Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of 97 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 1/2 inch inside diameter and a nominal overall length of 108.0 inches, including perforated covers. All production must strictly adhere to NSN 4720-01-359-0598 and RA001 standards. The project is subject to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026.

All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing military-grade packaging and marking services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the preparation of five valves for First Destination Transportation shipment, ensuring full preservation and traceability of the fluid handling components. Technical execution must strictly adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, utilizing QUP 001, Pres Mthd AE, and designated cushioning and dunnage materials. The performance of these services will take place in Tracy, California, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-238-5948)This subcontract involves the procurement or manufacture of five specialized safety relief valves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must match Eaton Aerospace part numbers 847357 and L1-CS-06-B-50, falling under NSN 4820-01-238-5948. Performance will take place in Tracy, California, with all deliverables subject to strict sampling and quality assurance standards according to MIL-STD-1916 or ASQ H1331. The contractor must ensure full compliance with the Buy American Act and adhere to environmental prohibitions regarding the use of mercury and hexavalent chromium. Interested parties must respond by November 2, 2026, to fulfill the requirements of this specialized equipment supply effort.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS