Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Electrical Solenoids (NSN 5945-01-062-4974)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense for the DLA Weapons Support Active Devices Division, requires the manufacture or procurement of 10 electrical solenoids under NSN 5945-01-062-4974. The project is designated as a Total Small Business Set-Aside under NAICS code 335314. All units must strictly adhere to the Buy American Act and the Berry Amendment, with specific technical requirements for lead finish markings per IPC/JEDEC J-STD-609 and hazardous material labeling in accordance with 29 CFR 1910.1200. The completed solenoids are to be delivered FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. Interested parties must respond by October 26, 2026.

General Info

DoD subcontract for 10 electrical solenoids, small business set-aside, due October 26, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

335314 - Relay and Industrial Control Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M5-27-T-0971.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SOLENOID, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical solenoids for prime contractors on DLA Weapons Support Active Devices Division projects. Manufactures or sources 10 units of NSN 5945-01-062-4974 ensuring lead finish markings comply with IPC/JEDEC J-STD-609 and hazardous material labeling per 29 CFR 1910.1200. Adheres to Buy American Act and Berry Amendment. Delivers 10 completed solenoids FOB Origin to DLA Distribution San Joaquin.

Similar Contracts

Same NAICS industry code

Solicitation # 48984

The City of Piqua, Ohio, is soliciting bids for the 69kV The Site Substation project, specifically focusing on the procurement and furnishing of the control building and relay panels. With an engineer's estimate of 425,000 dollars, the scope of work involves providing the major equipment necessary for the substation's control infrastructure. This solicitation, identified as 24-17.9A, was posted on October 15, 2026, with a response deadline of October 21, 2026. The project falls under NAICS code 335314 and is managed by the City of Piqua within the state of Ohio.

POSTED

about 15 hours ago

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M5-27-T-1049

Solicitation SPE7M5-27-T-1049, issued by the DLA Weapons Support Active Devices Division, is for the procurement of 97 electromagnetic relays, identified as Commercial Off The Shelf items under NSN 5945013690791 and TE Connectivity part number R10-T1P2-115V. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of January 28, 2027, and an original required delivery date of March 4, 2027. The items are designated as critical application items and must adhere to strict environmental and material restrictions, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Compliance requirements include adherence to MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and IPC/JEDEC J-STD-609 for lead finish identification. Inspection and acceptance will occur at the destination. Administrative requirements mandate the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is open to various small business set-asides under NAICS code 335314, with a submission deadline of October 26, 2026, via the DIBBS portal. The award may be processed as an automated award provided no first article testing is required.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M0-27-T-0377

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

SWITCH, PROXIMITY

Solicitation # SPE7M8-27-Q-0007

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M5-27-T-1091

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

RELAY, ELECTROMAGNET

Solicitation # SPE7M3-27-T-0039

Solicitation SPE7M3-27-T-0039 is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two electromagnet relays, identified by NSN 5945014980330 and Rockwell Automation part number 700-P110A1. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, by September 21, 2026, with a delivery timeframe of 49 days. Shipping is specified as FOB Origin, and both inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for general marking. Additionally, contractors must apply component lead finish markings in accordance with IPC/JEDEC J-STD-609. Environmental and safety restrictions prohibit the intentional addition of mercury to the hardware and require hazardous material labeling per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and equal opportunity.

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M5-27-T-1059

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M5-27-T-1087

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Electromagnetic Relay Supplier (PN 204-15360-101)This subcontract involves the supply of two electromagnetic relays for prime contractors supporting the DLA Weapons Support Active Devices Division. The relays must be manufactured or procured in accordance with basic drawing NR 81205 204-15360 Revision E and must adhere to critical application item quality standards. Approved sourcing is strictly limited to Dare Electronics, Inc. or Leach International Corp. To be eligible, the supplier must maintain US/Canada Joint Certification Program status, CMMC Level 2, and NIST SP 800-171 compliance. The performance location for this contract is Tinker AFB. Interested parties must respond by October 26, 2026, regarding the procurement of part number 204-15360-101 under NAICS code 335314.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Electromagnetic Relays (NSN 5945-01-493-4161)This subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the procurement or manufacture of five electromagnetic relays. The components must match TE Connectivity Corporation part number C-21AA and NSN 5945-01-493-4161. All deliverables must adhere to specific technical and regulatory standards, including lead finish markings per IPC/JEDEC J-STD-609 and strict compliance with RA001, the Buy American Act, and the Berry Amendment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335314, with performance taking place at Robins Air Force Base. Prospective contractors must undergo a NIST SP 800-171 cybersecurity assessment to ensure data security. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Thermal Flasher Units (NSN 5945-01-397-2110)This subcontract involves the manufacture or sourcing of 21 thermal flasher units, specifically NSN 5945-01-397-2110, for prime contractors serving the DLA Weapons Support Active Devices Division. The units must be produced in accordance with the DLA Master List of Technical and Quality Requirements RA001, with strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The agreement requires full compliance with the Buy American Act and DFARS telecommunications representations. Delivery of the packaged units is set as FOB Origin, with performance taking place in New Cumberland. The contract falls under NAICS code 335314 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of MIL-SPEC Electromagnetic Relay (NSN 5945011627280)This subcontract involves the supply of one critical application electromagnetic relay, identified by NSN 5945011627280, to support prime contractors working with the Department of Defense DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing the relays in strict accordance with MIL-PRF-6106/19H and MIL-PRF-6106R(1) standards, utilizing only QPL and QML listed sources. Additional technical requirements include applying lead finish markings per IPC/JEDEC J-STD-609 and ensuring packaging complies with MIL-STD-2073-1E and MIL-STD-129. The delivery terms are specified as FOB Origin, with the place of performance located in Yorktown, Virginia. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

Supply of Headset-Microphones (NSN 5965-01-610-2948)This subcontract, issued by the DLA Weapons Support Active Devices Division, requires the manufacture or procurement of 28 finished headset-microphones meeting NSN 5965-01-610-2948 specifications. The selected provider must ensure all units are packaged and palletized according to RP001 and marked in accordance with MIL-STD-129. Final delivery of the completed units is to be made to DLA Distribution DDSP in New Cumberland, Pennsylvania. The contract is designated as a Total Small Business Set-Aside under NAICS code 334310. Strict adherence to the Buy American Act and the Berry Amendment is required, along with compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Responses to this solicitation are due by October 26, 2026.

Audio and Video Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Electronic Shielding Gaskets (NSN 5999-01-680-6551)This subcontract involves the supply of two electronic shielding gaskets, identified by NSN 5999-01-680-6551, for prime contractors supporting the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or procuring the gaskets in strict accordance with Part Number PG632000-42 and the DLA Master List of Technical and Quality Requirements. To ensure operational effectiveness, the materials must provide EMI interference protection and adhere to DFARS cybersecurity compliance standards. Logistical requirements include packaging and marking performed according to MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must have submitted responses by the deadline of October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Headset-Microphones (NSN 5965-01-610-2948)This subcontract, issued by the Department of Defense for the DLA Weapons Support Active Devices Division, requires the procurement of 160 headset-microphones meeting NSN 5965-01-610-2948 specifications. The selected provider is responsible for manufacturing or sourcing the units, ensuring strict adherence to RA001 quality control standards and packaging requirements defined by MIL-STD-129, RP001, and ASTM D3951. All materials must be compliant with the Buy American Act and the Berry Amendment, with final delivery to DLA Distribution DDSP New Cumberland. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334310. Interested parties must submit their responses by October 26, 2026. Performance of the contract will take place in New Cumberland, Pennsylvania.

Audio and Video Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-218-2325)This subcontract involves the manufacture or procurement of 30 electrical plug connectors, specifically NSN 5935-01-218-2325, to support prime contractors for the DLA Weapons Support Active Devices Division. The components must strictly comply with SAE AS50151 and SAE AS34061 standards, with mandatory marking and packaging according to MIL-STD-129 and MIL-STD-2073-1E. Delivery is designated as FOB Origin, with the place of performance located in Tracy, California. To ensure operational quality and security, the contractor must adhere to MIL-STD-1916 or ASQ H1331 quality sampling protocols and maintain DFARS cybersecurity standards. The opportunity falls under NAICS code 335911 and requires responses by October 26, 2026.

Storage Battery Manufacturing

POSTED

about 17 hours ago

DEADLINE

ESD/EMI Protective Packaging Services for MicrocircuitsThis subcontract involves providing specialized ESD and EMI protective packaging services for microcircuits supporting the DLA Weapons Support Active Devices Division. The contractor is responsible for utilizing approved field force protective workstations and MIL-PRF-81705 materials to ensure components are shielded from damage. All items must be marked and packaged in strict accordance with MIL-STD-129, IPC/JEDEC J-STD-609, and MIL-STD-2073-1E standards to ensure they are ready for shipment via DLA Distribution DDWO. The project is categorized under NAICS code 339999 and will be performed in Columbus, Ohio. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense requirement.

All Other Miscellaneous Manufacturing

POSTED

about 17 hours ago

DEADLINE

Qualified Digital Microcircuit Production (NSN 5962015272682)This subcontract involves the manufacture and supply of 15 digital microcircuit units, specifically NSN 5962015272682, for the DLA Weapons Support Active Devices Division. Production must take place in cleanroom facilities adhering to Standard Microcircuit Drawing specifications. To be eligible, the provider must maintain QPL or QML qualification and hold certification in either SAE AS9003 or ISO 9001 quality systems. The final delivery requires the submission of 15 units accompanied by unredacted traceability documentation and DLA Land and Maritime Form 918. The project is categorized under NAICS code 334413, with the place of performance located in Columbus, Ohio. The response deadline for this requirement is October 26, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves providing technical testing and quality validation services for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The scope of work focuses on performing tests for NSN 5935-01-461-5817 in accordance with requirement RT001 and established technical data packages. The selected contractor must utilize calibrated measuring and test equipment to deliver one tested First Article unit along with all necessary test reports. Performance will take place at Hill AFB, and the project falls under NAICS code 541380. Due to the nature of the specifications, the contractor is required to maintain JCP certification and ensure full compliance with ITAR and EAR regulations. Responses for this opportunity are due by October 26, 2026.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Manufacture of Electrical Covers (NSN 5935-01-461-5817)This subcontract involves the manufacture of electrical covers for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the fabrication of 42 finished covers and one FAT unit in strict accordance with Reference Drawing NR 81755 FPS-3025, Revision B2 and DLA Master List RA001. Performance will take place at Hill AFB. To qualify, the manufacturer must maintain ISO 9001:2015 certification and hold JCP certification for handling export-controlled data. Strict adherence to ITAR and EAR regulations is mandatory, and all materials used must comply with the Buy American Act and Berry Amendment standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Electrical Connector Body Receptacles (NSN 5935-01-696-7568)This subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, requires the manufacture or sourcing of 42 electrical connector body receptacles under NSN 5935-01-696-7568. The project is a total small business set-aside under NAICS code 334417, with performance taking place in New Cumberland. The contractor must adhere to DLA Master List requirements, implement strict ESD protection protocols, and ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. Critical regulatory compliance includes adherence to the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 cybersecurity standards. Interested parties must submit their responses by October 26, 2026.

Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-PRF-81705 Protective PackagingThis subcontract with the Department of Defense DLA Weapons Support Active Devices Division involves providing specialized electrostatic discharge and electromagnetic interference protective packaging for prime contractors. The scope of work requires packaging components in accordance with MIL-PRF-81705 standards, utilizing ESD-safe workstations, EMI shielding, and specific barrier materials to prevent lead damage. Additionally, the contractor is responsible for applying all marking and labeling per MIL-STD-129 to ensure components are securely prepared for transit. The project is categorized under NAICS code 561910 and will be performed in New Cumberland. Interested parties should note the response deadline of October 26, 2026. The primary objective is to maintain the integrity of sensitive electronic components through rigorous adherence to military packaging and labeling specifications.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Supply of JAN2N6547 TransistorsThis subcontract involves the supply of 173 units of Transistor JAN2N6547, identified by NSN 5961010775440, to support prime contractors for the DLA Weapons Support Active Devices Division. The components must strictly adhere to QML and QSLD standards for FSC 5961, with lead finishes complying with J-STD-609 and marking requirements meeting MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP facility located in New Cumberland, Pennsylvania. To be eligible, providers must hold QML/QSLD certification and maintain rigorous cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. The opportunity falls under NAICS code 423610, with a response deadline set for October 26, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Electronic Packaging and MarkingThis subcontract for the Department of Defense DLA Weapons Support Active Devices Division involves the specialized packaging, sealing, and marking of sensitive electronic components. The contractor is responsible for ensuring all items are processed using ESD-safe equipment and delivered in certified barrier packaging. Work must strictly adhere to MIL-STD-2073-1E and MIL-PRF-81705 standards for packaging and materials, while marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. The project is categorized under NAICS code 488510 and will be performed in Columbus, Ohio. Interested parties must respond by October 26, 2026, to provide these critical support services for prime contractors.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS