Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Engine Gas Path Cleaning Compound (NSN 6850001817594)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement and delivery of two containers of military-grade cleaning compound designated for aircraft engine gas path cleaning, conforming to established MIL-specifications. The compound is identified by the National Stock Number 6850001817594 and is to be delivered FOB destination, meaning the supplier bears all costs and risks until the goods reach the designated delivery point. This subcontract falls under the NAICS code 325992, indicating it pertains to other chemical product and preparation manufacturing. The contract is managed by the Defense Logistics Agency under the Department of Defense with no set-aside provisions specified. The issuance date is listed as July 16, 2026, and performance is tied to the DLA’s contracting system through the referenced award and delivery identifiers.

General Info

Procurement of two MIL-spec cleaning compound containers for aircraft engines, FOB destination, DLA-managed, issued July 16, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325992 - Photographic Film, Paper, Plate, Chemical, and Copy Toner ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A626FCTLQ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLEANING COMPOUND, ENGINE GAS PATH

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 2 containers of military-grade cleaning compound for aircraft engine gas path cleaning, conforming to MIL-specifications and delivered FOB destination.

Similar Contracts

Same NAICS industry code

Supply of FiberTect Decontamination Wipes

Eop - Office Of Administration

POSTED

DEADLINE

Solicitation # SP330026Q0263

This acquisition requirement, identified by solicitation number SP330026Q0263, is for the procurement of toner for the Department of Defense through DLA Distribution. The contract is a 100% set-aside for SBA-certified Woman-Owned Small Businesses under NAICS code 325992. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 3, 2026, at 2:00 PM. Primary coordination for this requirement is handled by Joshua J. Derr.

DLA Distribution

POSTED

DEADLINE

Liquid Polymer SupplyThe Upper Trinity Regional Water District is seeking a subcontractor for the supply of liquid polydiallyldimethylammonium chloride, also known as polyDADMAC. This cationic coagulant is specifically required for use in water and wastewater treatment processes to facilitate solids removal and clarification. The solicitation for this liquid polymer supply was posted on August 28, 2026, with a response deadline of September 28, 2026. The contract falls under NAICS code 325992 and is being managed through the Texas state procurement system.

UPPER TRINITY REGIONAL WATER DISTRICT

POSTED

DEADLINE

Defense Logistics Packaging and Marking ServicesThe Defense Logistics Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires the provision of military-compliant packaging and marking for delivered items. All services must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E standards, with a specific requirement for hazardous material labeling where applicable. This opportunity falls under NAICS code 325992 and was posted on August 27, 2026. Interested parties must submit their responses by the deadline of September 4, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Water Treatment and Chemical Supply

County of Orange, OC Public Works

POSTED

DEADLINE

Sterile Packaging and Labeling

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Device Packaging and Labeling ComplianceThis subcontract with the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, involves the packaging, preservation, and labeling of spinal needles. The work must be performed in accordance with MIL-STD-2073-1E and Medical Marking Standard No. 1 to ensure full DOD compliance. The project is categorized under NAICS code 325992 and will be executed in San Antonio, Texas. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Domestic Sourcing & Material Compliance (Buy American / Berry Amendment)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M5-26-Q-0936

This solicitation is for the procurement of 102 fluid filter elements under NSN 5999-01-248-3179 for the Department of Defense Active Devices Division. The contract is a total small business set-aside with a delivery requirement of 149 days after order. This is a restricted source item that requires engineering source approval by the government design control activity. Compliance requirements include DLA packaging and documentation standards for source approval requests, as well as CMMC Level 2 self-assessment and covered defense information protocols. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. All technical and quality requirements are governed by the DLA master list based on the solicitation or award date.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Tamper-Evident Security Tape SupplyThe Department of Administrative Services for New Hampshire is seeking a subcontractor for the supply of tamper-evident security tape designed for packaging cartons. The required tape must feature visible breach indicators that trigger upon removal to ensure package integrity. Bidders are mandated to provide physical samples of the product along with their bid submission to be considered. This procurement opportunity was posted on August 26, 2026, and requires a response by September 4, 2026, at 6:00 PM. The contract falls under NAICS code 325992 and is managed through the New Hampshire procurement portal.

Department Of Administrative Services

POSTED

DEADLINE

Packaging and Labeling Services

DLA Distribution

POSTED

DEADLINE

Sterile Packaging and Kitting ServicesThis subcontract opportunity with the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, involves the assembly, sterilization, and packaging of medical components into complete catheterization kits. All work must be performed in strict accordance with established military standards to ensure the quality and sterility of the medical supplies. The project falls under NAICS code 325992 and was posted on August 25, 2026. Interested parties must submit their responses by the deadline of August 31, 2026. Further details and application procedures are available through the DIBBS procurement portal.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 18 hours

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

FEEDER, CHEMICAL SOL

Solicitation # SPE8E8-26-T-5356

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of two chemical solution feeders, identified by NSN 4610016523963 and Knight Inc part number 7116344. The requirement specifies a delivery timeframe of 20 days after order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The items are to be delivered to the 703 CS BN CO A Distribution center at Fort Stewart, Georgia, using the fastest traceable means of transport. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, taking precedence over ASTM D3951 packaging standards. All packaging and labeling must adhere to MIL-STD-129 and RP001 packaging requirements. The contract also incorporates specific guidelines regarding the removal of government identification from non-accepted supplies and documentation requirements for source approval requests.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-4397

This contract, identified as SPE8E6-26-T-4397, is a solicitation issued by the Defense Logistics Agency for the procurement of one identification marker, part number 87011A0800M1-4, under NSN 7690016703610. The delivery is required within 20 days after receipt of the order, with an original required delivery date of February 17, 2026. The shipment is destined for Camp Pendleton, California, and must be sent via the fastest traceable means, specifically prohibiting the use of parcel post. The agreement incorporates several technical and quality requirements from the DLA Master List, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements take precedence. The contract specifies that the inspection and acceptance points are at the destination, and the delivery terms are FOB Origin.

Commercial Printing (except Screen and Books)

POSTED

about 6 hours ago

DEADLINE

JACKET, HEAT EXCHANGER

Solicitation # SPE8E8-26-T-5375

This contract is for the procurement of one copper alloy heat exchanger jacket, identified by NSN 4420012279248 and part number 4-440-03-008-013. The order is issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-5375, with a required delivery date of September 2, 2026, and a delivery timeframe of five days after receipt of order. Shipping is set as FOB Origin, with the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA. Inspection and acceptance will take place at the point of origin, and the contractor must comply with all specified packaging and palletization protocols to ensure the item is properly prepared for international transport.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5031

This contract, identified as SPE7L7-26-T-5031, is a solicitation by the Defense Logistics Agency for the procurement of two power supply units, part number H7862-C, manufactured by Digital Equipment Corp/Compaq Federal LLC. The order specifies a delivery timeframe of 20 days after the order is placed, with a required delivery date of September 2, 2026. The items are to be delivered FOB Origin and shipped to the Government of Israel Ministry of Defense. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Key compliance requirements include the CMMC Level 2 self-assessment for cybersecurity and a prohibition on the intentional use of mercury or mercury-containing compounds, except in specific approved components. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.

Motor and Generator Manufacturing

POSTED

about 6 hours ago

DEADLINE

POLYURETHANE COATIN

Solicitation # SPE8ES-26-T-2665

This contract is for the procurement of one kit of polyurethane coating, identified by NSN 8010-01-719-9246, under solicitation SPE8ES-26-T-2665. The item is classified as a Type I product with a non-extendable shelf life of 12 months. Delivery is required within 20 days, with the final destination and inspection point located in Dallas, Texas. The procurement must adhere to specific technical and quality requirements, including MIL-PRF-85285F and MIL-STD-129R. Suppliers must comply with strict hazardous material regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 C.F.R. 1910.1200. Packaging and marking must follow MIL-STD-2073-1E and DLA packaging requirements. Additionally, the contract specifies that components must be sourced from Qualified Products Lists or Qualified Manufacturers Lists and requires the removal of government identification from any non-accepted supplies.

Paint and Coating Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E7-26-T-3724

This contract, identified as SPE8E7-26-T-3724, is a procurement for three tube axial fans under NSN 4140014539043 and part number 12-49995-01. The order is issued by the Defense Logistics Agency with a required delivery date of February 5, 2026, and a delivery timeframe of 20 days after receipt of the order. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including packaging standards ASTM D3951 and marking requirements per MIL-STD-129. Palletization must comply with RP001 requirements. The items are to be shipped via the fastest traceable means to the Stallion Range Center in San Antonio, New Mexico, and the use of parcel post is strictly prohibited.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

BAFFLE, AIRFLOW, ELEC

Solicitation # SPE8E8-26-T-5374

This solicitation from the Defense Logistics Agency is for the procurement of one electronic airflow baffle, identified by NSN 4130-01-474-3216. The contract requires delivery within 20 days after receipt of order and mandates strict adherence to quality standards, specifically ANSI/ISO/ASQ 9001:2015 or AS 9100. Additionally, the provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and agree to inspection and acceptance at the point of origin. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires. Unauthorized disclosure of this technical data to foreign persons or nationals is prohibited without prior authorization from the Department of State or Department of Commerce.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

HEATER, DUCT TYPE, ST

Solicitation # SPE8E8-26-T-5361

This contract, issued by the Defense Logistics Agency under solicitation number SPE8E8-26-T-5361, is for the procurement of two duct type heaters, identified by NSN 4520-01-255-8844 and part number 210-19082-42. The items are to be delivered FOB destination to the USNS Joshua Humphreys. The required delivery timeframe is 20 days, with an original required delivery date of February 12, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Shipping must be conducted via traceable means, and the use of parcel post is explicitly prohibited.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4088

This contract, identified as SPE8E5-26-T-4088, is a solicitation by the Defense Logistics Agency for the procurement of 10 carabiners, specifically part number 18502 from Summit Rescue Inc. The items are classified as critical application items under NSN 4240-01-295-4305. Delivery is required within 20 days after order, with a required delivery date of August 3, 2026. Shipping is FOB Origin and must be sent via traceable means to Scott AFB, Illinois. The contract mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

SOLAR LIGHT, MIRROR

Solicitation # SPE8E7-26-T-3732

This contract, identified as SPE8E7-26-T-3732, is a solicitation by the Defense Logistics Agency for the procurement of two solar light mirrors under NSN 6210-01-379-0169. The agreement specifies a delivery timeframe of five days after the order and requires shipment to Beale Air Force Base in California. The contract identifies several approved sources, including Tracy and Associates Inc, SO Luminaire Daylighting Systems, and Natural Lighting Co. Inc, all utilizing part number 48DS-MI. Compliance with DLA packaging requirements is mandatory, specifically adhering to RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. The terms stipulate that the delivery is FOB Origin, while both inspection and acceptance will occur at the destination. All technical and quality requirements are governed by the DLA Master List, and the original required delivery date is set for February 5, 2026.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 6 hours ago

DEADLINE

COVER, ACCESS, TORSION

Solicitation # SPE7L7-26-T-5030

This solicitation from the Defense Logistics Agency is for the procurement of one torsion access cover, identified by NSN 1015-01-343-1819. The contract requires delivery within five days after the order is received and is subject to specific technical and quality requirements maintained in the DLA master list. Key compliance mandates include CMMC Level 2 self-assessment and third-party assessment, adherence to DLA packaging requirements, and strict demilitarization protocols for small arms weapons and accessories. The agreement emphasizes rigorous quality control, including inspection and acceptance at origin and adherence to Qualified Products Lists or Qualified Manufacturers Lists. Due to the nature of the item, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access technical data. Item Unique Identification is not required for this specific request.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

KEY, DRILL CHUCK

Solicitation # SPE8E5-26-T-4090

This contract, identified as SPE8E5-26-T-4090, is a solicitation by the Defense Logistics Agency for the procurement of one drill chuck key, part number 5140088-64 from Delta Power Equipment Inc. The item is associated with NSN 3460016446822 and is destined for the USS Billings (LCS-15). Delivery is required within 20 days after receipt of the order, with an original required delivery date of January 23, 2026. The agreement specifies that shipping is FOB Destination, with inspection and acceptance also occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies. Shipment must be made via the fastest traceable means, specifically prohibiting the use of parcel post.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 6 hours ago

DEADLINE